☆ 4.8 Article

Manipulation of Impedance Matching toward 3D-Printed Lightweight and Stiff MXene- Based Aerogels for Consecutive Multiband Tunable Electromagnetic Wave Absorption

ACS NANO (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Structural Defects in Phase-Regulated High-Entropy Oxides toward Superior Microwave Absorption Properties

Biao Zhao et al.

Summary: This study presents the preparation of two biphasic high-entropy (HE) oxides by controlling crystal phases and structural defects. The HE effects in these complex-phase ceramics induce beneficial defects for microwave dissipation. Stress concentrations and lattice distortions at the interface of spinel and perovskite planes result in numerous point defects and stacking faults. By precise regulation of the components' phase, synergistic effects are achieved in rock salt/spinel HE oxides. The intense polarization driven by structural defects and multi-phases leads to excellent microwave absorption performance, with a minimal reflection loss of -54.5 dB. This research provides valuable guidelines for the design of microwave absorbers using HE oxides.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

High-Entropy Enhanced Microwave Attenuation in Titanate Perovskites

Biao Zhao et al.

Summary: A high-entropy-stabilized (Ca0.2Sr0.2Ba0.2La0.2Pb0.2)TiO3 perovskite with improved absorption bandwidth is reported. The regulation of entropy configuration leads to significant grain boundaries, oxygen defects, and a dense distorted lattice, contributing to the dielectric attenuation performance. The strong lattice distortions in the high-entropy perovskite offer varied transport for electron carriers, resulting in unusual dielectric polarization loss. This study opens up an effective avenue for designing strong microwave absorption materials and improving other properties for high-entropy oxides through entropy engineering.

ADVANCED MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

High-Density Anisotropy Magnetism Enhanced Microwave Absorption Performance in Ti3C2Tx MXene@Ni Microspheres

Caiyue Wen et al.

Summary: This study successfully assembled double-shell MXene@Ni microspheres using a spheroidization strategy to improve microwave absorption performance. The structure offers massive accessible active surfaces and the introduction of Ni nanospikes provides additional magnetic loss capacity.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Achieving Super Broadband Electromagnetic Absorption by Optimizing Impedance Match of rGO Sponge Metamaterials

Xianxian Sun et al.

Summary: The study presents metamaterials based on reduced graphene oxide (rGO) sponges with frustum pyramid shapes, which exhibit excellent electromagnetic absorption performance in the range of 2-40 GHz, showing ultrabroad band and high absorption rate. These metamaterials demonstrate outstanding impedance matching and strong dielectric loss, making them highly promising for broadband electromagnetic protection applications.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Ti3C2Tx MXene/Carbon Nanotubes Hollow Microsphere with Confined Magnetic Nanospheres for Broadband Microwave Absorption

Chang Zhang et al.

Summary: The hierarchical MXene-based hollow microsphere design strategy shows great potential for high-efficiency microwave absorption performance, with excellent interfacial polarization and magnetic loss effects, as well as optimized impedance matching and conduction loss.

SMALL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Anion-Doping-Induced Vacancy Engineering of Cobalt Sulfoselenide for Boosting Electromagnetic Wave Absorption

Jiaolong Liu et al.

Summary: This study demonstrates the modulation of the electronic structure of transition metal chalcogens through vacancy engineering and establishes a clear correlation between vacancy concentrations/various anion vacancies and electromagnetic wave dissipation ability. By selectively oxidizing and sulfuring/selenizing a Co-based precursor, the vacancy level is improved and a broad bandwidth of S-doped CoSe2 material is achieved, showing 100% coverage for X- and Ku-bands at 2.42 mm.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Hydrophobic and flame-retardant multifunctional foam for enhanced thermal insulation and broadband microwave absorption via a triple-continuous network of RGO/MWCNT-melamine composite

Wenle Ma et al.

Summary: In this manuscript, a lightweight RGO/MWCNT modified melamine sponge (CGMFs) with a 3D porous triple-continuous network is developed, which exhibit much enhanced microwave absorption performance and multifunctional characteristics. The micro/nano-structure and EMA performance of CGMFs can be effectively controlled by adjusting the concentration and proportion of RGO and MWCNT. The CGMFs present remarkable effective absorption bandwidth (EAB) and extremely high reflection loss value, while also exhibiting good mechanical stability and attractive functions.

CARBON (2022)

Add to Collection

Article Engineering, Environmental

Low-temperature carbonized biomimetic cellulose nanofiber/MXene composite membrane with excellent microwave absorption performance and tunable absorption bands

Hao Peng et al.

Summary: In this study, nanofiber cellulose (CNF) was combined with MXenes to create membranes with biomimetic structures, aiming to enhance microwave absorption performance. Nacre-like and loofah-like carbonized CNF/MXene membranes were successfully prepared and demonstrated superior absorption capabilities, with the absorption peaks mainly concentrated in specific microwave frequency bands. The study also investigated the absorption mechanism of biomimetic composite membranes.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Mechanically robust and multifunctional polyimide/MXene composite aerogel for smart fire protection

Changcheng Jiang et al.

Summary: A multifunctional smart fire-protection aerogel with temperature-sensing and fire-warning capabilities has been fabricated. The aerogel showed sensitive temperature-sensing capability and could trigger the fire-warning system within 5 seconds when burned. It also exhibited excellent flame retardancy, thermal insulation, thermostability, and durable piezoresistive sensing.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Layered 3D structure derived from MXene/magnetic carbon nanotubes for ultra-broadband electromagnetic wave absorption

Tianqi Hou et al.

Summary: The widespread use of communication equipment has led to the deterioration of the electromagnetic environment, necessitating the development of more efficient electromagnetic wave absorption materials. By modifying Ti3C2Tx MXene composites with magnetic NiCo/Carbon nanotubes (CNTs), the absorption of electromagnetic waves is achieved.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Ti3C2Tx/MoS2 Self-Rolling Rod-Based Foam Boosts Interfacial Polarization for Electromagnetic Wave Absorption

Minghang Li et al.

Summary: Heterogeneous interface design is a feasible way to enhance the electromagnetic wave absorbing performance of dielectric materials. This study proposes a Ti3C2Tx/MoS2 self-rolling rod-based foam, which shows excellent interfacial polarization and high electromagnetic wave absorption performance at ultralow density.

ADVANCED SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

3D printing of resilient, lightweight and conductive MXene/reduced graphene oxide architectures for broadband electromagnetic interference shielding

Yang Dai et al.

Summary: In this study, lightweight, resilient, and conductive MXene-based scaffolds were successfully 3D printed using a direct ink writing technique, demonstrating the impact of structural design flexibility on optimizing comprehensive performance. The printed MXene/RGO scaffolds showed high electrical conductivity and broadband tunable electromagnetic interference shielding effectiveness, as well as excellent reversible compressibility and cyclic fatigue resistance.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Lightweight, Superelastic, and Hydrophobic Polyimide Nanofiber /MXene Composite Aerogel for Wearable Piezoresistive Sensor and Oil/Water Separation Applications

Hu Liu et al.

Summary: The article describes a conductive polyimide nanofiber/MXene composite aerogel with features such as ultralow density, temperature tolerance, superior compressibility, and fatigue resistance, suitable for applications in piezoresistive sensors and oil/water separation.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Lightweight, multifunctional MXene/polymer composites with enhanced electromagnetic wave absorption and high-performance thermal conductivity

Ruosong Li et al.

Summary: A new polymer composite foam material was developed in this study, which exhibited excellent electromagnetic wave (EMW) absorption and thermal conduction properties by introducing MXene and cobalt (Co) elements. By utilizing CO2-assisted foaming technology, composite foams with uniform foam structure were successfully prepared. The synergy between the foam structure and TiO2 nanocrystals resulted in significantly enhanced performance of the composite foam.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

3D-printed carbon fiber/polyamide-based flexible honeycomb structural absorber for multifunctional broadband microwave absorption

Ping Gong et al.

Summary: A novel flexible honeycomb structural absorber (FHSA) of carbon fiber/polyamide/carbonyl iron composite was successfully fabricated via selective laser sintering (SLS) 3D-printing, showing excellent microwave absorption performance under high bending angles. Additionally, the FHSA demonstrated highly flexible deformation, self-recovery, and no-crease damage in repeated bending, making it potentially applicable in wearable functional devices and military stealth protection.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

A hierarchical carbon Fiber@MXene@ZnO core-sheath synergistic microstructure for efficient microwave absorption and photothermal conversion

Xiaopeng Han et al.

Summary: The continuous 3D hierarchical construction method has been proven to be an effective way to prepare high-efficiency microwave absorption composites. A novel hierarchical carbon fiber @MXene@ZnO core-sheath structure with tunable and efficient microwave absorption performance has been successfully synthesized through a self-assembly and hydrothermal process. The composite material exhibits excellent microwave absorption and photothermal properties, providing a new strategy for designing safe and wearable devices.

CARBON (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Superelastic, Ultralight, and Conductive Ti3C2Tx MXene/Acidified Carbon Nanotube Anisotropic Aerogels for Electromagnetic Interference Shielding

Zhiming Deng et al.

Summary: The study demonstrates a method to fabricate conductive lightweight aerogels with superelasticity and high thermal insulation by mimicking the plant Parthenocissus tricuspidata. These aerogels show high efficiency in EMI shielding applications and exhibit good thermal insulation performance. By controlling the composition ratio, the density and EMI shielding effectiveness of the aerogels can be adjusted accordingly.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

NiFe LDH/MXene Derivatives Interconnected with Carbon Fabric for Flexible Electromagnetic Wave Absorption

Zihan Wang et al.

Summary: The construction of flexible and lightweight electromagnetic wave absorbers is critical, and can be achieved by interconnecting carbon fibers with NiFe-layered double hydroxide/MXene derivatives to effectively adjust the electromagnetic parameters. Through tuning the content of the interconnectors around the percolation threshold, optimal reflection loss and wide effective absorption bandwidth can be achieved. This work provides insights on constructing percolation networks and effectively manipulating electronic and magnetic properties for applications in various fields.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Magnetic Ti3C2Tx MXene/Graphene Aerogel with Superior Electromagnetic Wave Absorption Performance

Luyang Liang et al.

Summary: The study successfully developed a three-dimensional dielectric/magnetic aerogel with superior absorption performance, broad absorption bandwidth, and excellent electromagnetic wave absorbing capabilities, demonstrating potential for stable and durable electromagnetic applications.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Lightweight Ni Foam-Based Ultra-Broadband Electromagnetic Wave Absorber

Ming Qin et al.

Summary: In this study, lightweight Ni foam with NiO/NiFe2O4 in situ growth composites were fabricated to address the issues of poor dispersibility and chemical stability in metal-based electromagnetic wave absorbing materials. The foam structure and NiO/NiFe2O4/Ni components were found to synergistically enhance the EM wave absorption capacity. This work sheds light on the synergistic effect of structure and components on EM wave absorption behaviors, offering a new pathway for preparing lightweight and high-performance metal-based EM wave absorbers.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

MXene/FeCo films with distinct and tunable electromagnetic wave absorption by morphology control and magnetic anisotropy

Xiao Li et al.

Summary: MXene is used as a microwave absorber to defense electromagnetic pollution, and the excessive conductivity of single-layer MXene is reduced by preparing a flexible MXene/FeCo film via vacuum-assisted filtration, with the intercalation of magnetic nanoparticles destroying the continuous layered structure. The rough surface of nanoflower-like FeCo alloy enhances interfacial polarization and magnetic loss capabilities, leading to better microwave absorption performance.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

Evolutionary optimization design of honeycomb metastructure with effective mechanical resistance and broadband microwave absorption

Yixing Huang et al.

Summary: A glass fiber/carbon fiber reinforced honeycomb metastructure with wide absorption bandwidth and high mechanical strength was designed and fabricated, successfully integrating electromagnetic absorption and mechanical resistance.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

Enhanced electromagnetic wave absorption performance of polymer/SiC-nanowire/MXene (Ti3C2Tx) composites

Li Ma et al.

Summary: The study successfully developed nanocomposites with superior electromagnetic wave absorption properties by incorporating SiC nanowires/MXene heterogeneous structures into the PVDF matrix. These composites achieved an effective bandwidth of 5.0 GHz in the Ku-band, with low reflection loss and excellent electromagnetic wave absorption performance.

CARBON (2021)

Add to Collection

Article Engineering, Environmental

Synthesis of NiCo-LDH/MXene hybrids with abundant heterojunction surfaces as a lightweight electromagnetic wave absorber

Xuran Gao et al.

Summary: By adjusting the loading of MXene, a series of NiCo-LDH/MXene hybrids with excellent electromagnetic wave absorption performance were obtained in this research. The synergistic effect of dielectric loss and magnetic loss, as well as the excellent attenuation ability and impedance matching characteristics of the material, contribute to the excellent EMW performance of the NiCo-LDH/MXene hybrids. The research demonstrated the impact of the structure and composition of EMW absorbers on their performance, and provided insights for the design and development of high-performance EMW absorption materials.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

3D Seed-Germination-Like MXene with In Situ Growing CNTs/Ni Heterojunction for Enhanced Microwave Absorption via Polarization and Magnetization

Xiao Li et al.

Summary: This study addresses the issue of lacking magnetic loss capability in pure MXene by fabricating a magnetic CNTs/Ni heterostructure decorated MXene substrate. This hybrid structure shows superior microwave absorption performance due to improved impedance matching conditions. The distinctive 3D architecture of the MXene-CNTs/Ni hybrid enhances magnetic loss and polarization capabilities, showcasing novel ideas for developing magnetic MXene-based absorbers.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

3D Ultralight Hollow NiCo Compound@MXene Composites for Tunable and High-Efficient Microwave Absorption

Hui-Ya Wang et al.

Summary: The 3D hollow hierarchical architectures designed to inhibit stack of MXene flakes have shown promising potential for lightweight, high-efficient microwave absorbers with tunable absorption properties. This study demonstrates a simple strategy for constructing MXene-based composites to achieve high-performance microwave absorption materials.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Electrostatically self-assembled two-dimensional magnetized MXene/hollow Fe3O4 nanoparticle hybrids with high electromagnetic absorption performance and improved impendence matching

Baiwen Deng et al.

Summary: In this study, lightweight and highly absorbent two-dimensional magnetized MXene hybrids were synthesized, showing excellent electromagnetic wave absorption performance and making them promising candidates for high-performance electromagnetic microwave absorbers.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Engineering, Environmental

Electrospun generation of Ti3C2Tx MXene@graphene oxide hybrid aerogel microspheres for tunable high-performance microwave absorption

Ying Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Stable 3D Ti3C2Tx MXene-Based Foam Architectures toward High-Performance Terahertz Radiation Shielding

Zehui Lin et al.

ACS NANO (2020)

Add to Collection

Article Engineering, Chemical

Two-dimensional MXene incorporated graphene oxide composite membrane with enhanced water purification performance

Ting Liu et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

2D MXenes for Electromagnetic Shielding: A Review

Aamir Iqbal et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Mechanically Robust Graphene/CNT Electrodes for Highly Efficient Overall Water Splitting

Peng Meiwen et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Ti3C2Tx MXene/Ni Chain/ZnO Array Hybrid Nanostructures on Cotton Fabric for Durable Self-Cleaning and Enhanced Microwave Absorption

Shijun Wang et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Compressible, Thermally Stable, Light-Weight, and Robust Aramid Nanofibers/Ti3AlC2 MXene Composite Aerogel for Sensitive Pressure Sensor

Lin Wang et al.

ACS NANO (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Graphene and MXene Nanomaterials: Toward High-Performance Electromagnetic Wave Absorption in Gigahertz Band Range

Qiang Song et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Highly sensitive, robust and anisotropic MXene aerogels for efficient broadband microwave absorption

Yang Dai et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Carbon Fiber@MXene@MoS2Core-sheath Synergistic Microstructure for Tunable and Efficient Microwave Absorption

Jianqiao Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Rational construction of hierarchical accordion-like Ni@porous carbon nanocomposites derived from metal-organic frameworks with enhanced microwave absorption

Zhen Xiang et al.

CARBON (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Galvanic Replacement Reaction Involving Core-Shell Magnetic Chains and Orientation-Tunable Microwave Absorption Properties

Biao Zhao et al.

SMALL (2020)

Add to Collection

Article Engineering, Multidisciplinary

In-situ growth of wafer-like Ti3C2/Carbon nanoparticle hybrids with excellent tunable electromagnetic absorption performance

Wenjie Zhu et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Multidisciplinary Sciences

Anomalous absorption of electromagnetic waves by 2D transition metal carbonitride Ti3CNTx (MXene)

Aamir Iqbal et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Novel solvothermal preparation and enhanced microwave absorption properties of Ti3C2Tx MXene modified by in situ coated Fe3O4 nanoparticles

Xiang Zhang et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Ultrathin multifunctional carbon/glass fiber reinforced lossy lattice metastructure for integrated design of broadband microwave absorption and effective load bearing

Yixing Huang et al.

CARBON (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Oriented Polarization Tuning Broadband Absorption from Flexible Hierarchical ZnO Arrays Vertically Supported on Carbon Cloth

Lei Wang et al.

SMALL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Promising Ti3C2Tx MXene/Ni Chain Hybrid with Excellent Electromagnetic Wave Absorption and Shielding Capacity

Luyang Liang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Compressible Highly Stable 3D Porous MXene/GO Foam with a Tunable High-Performance Stealth Property in the Terahertz Band

Wenle Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Ultralight Biomimetic Hierarchical Graphene Materials with Exceptional Stiffness and Resilience

Meiwen Peng et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Robust, Lightweight, Hydrophobic, and Fire-Retarded Polyimide/MXene Aerogels for Effective Oil/Water Separation

Ning-Ning Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Self-Assembly-Magnetized MXene Avoid Dual-Agglomeration with Enhanced Interfaces for Strong Microwave Absorption through a Tunable Electromagnetic Property

Xiao Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Consecutively Strong Absorption from Gigahertz to Terahertz Bands of a Monolithic Three-Dimensional Fe3O4/Graphene Material

Honghui Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Engineering, Manufacturing

A novel two-layer honeycomb sandwich structure absorber with high-performance microwave absorption

Hui Luo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Broadband Metamaterial Absorbers

Peng Yu et al.

ADVANCED OPTICAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Rheological Characteristics of 2D Titanium Carbide (MXene) Dispersions: A Guide for Processing MXenes

Bilen Akuzum et al.

ACS NANO (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Hierarchically structured cellulose aerogels with interconnected MXene networks and their enhanced microwave absorption properties

Yue Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Novel Scale-Like Structures of Graphite/TiC/Ti3C2 Hybrids for Electromagnetic Absorption

Mian Li et al.

ADVANCED ELECTRONIC MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Ultralight MXene-Coated, Interconnected SiCnws Three-Dimensional Lamellar Foams for Efficient Microwave Absorption in the X-Band

Xinliang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Assembly Core-Shell Graphene-Bridged Hollow MXenes Spheres 3D Foam with Ultrahigh Specific EM Absorption Performance

Xinliang Li et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional, Superelastic, and Lightweight MXene/Polyimide Aerogels

Ji Liu et al.

SMALL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A novel two-layer periodic stepped structure for effective broadband radar electromagnetic absorption

Qian Zhou et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Constructing Repairable Meta-Structures of Ultra-Broad-Band Electromagnetic Absorption from Three-Dimensional Printed Patterned Shells

Wei-Li Song et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient and Lightweight Electromagnetic Wave Absorber Derived from Metal Organic Framework-Encapsulated Cobalt Nanoparticles

Haicheng Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrophobic, Flexible, and Lightweight MXene Foams for High-Performance Electromagnetic-Interference Shielding

Ji Liu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Materials Science, Ceramics

Fabrication of urchin-like ZnO-MXene nanocomposites for high-performance electromagnetic absorption

Yue Qian et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Chemistry, Physical

Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2TX MXene)

Mohamed Alhabeb et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible MXene/Graphene Films for Ultrafast Supercapacitors with Outstanding Volumetric Capacitance

Jun Yan et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Ti3C2 MXenes with Modified Surface for High-Performance Electromagnetic Absorption and Shielding in the X-Band

Meikang Han et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Yolk-Shell Ni@SnO2 Composites with a Designable Interspace To Improve the Electromagnetic Wave Absorption Properties

Biao Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Review Multidisciplinary Sciences

Printing soft matter in three dimensions

Ryan L. Truby et al.

NATURE (2016)

Add to Collection

Article Multidisciplinary Sciences

Electromagnetic interference shielding with 2D transition metal carbides (MXenes)

Faisal Shahzad et al.

SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

Super-elastic and fatigue resistant carbon material with lamellar multi-arch microstructure

Huai-Ling Gao et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Multidisciplinary Sciences

Preparation and characterization of graphene oxide paper

Dmitriy A. Dikin et al.

NATURE (2007)

Add to Collection

Article Physics, Applied

Fabrication and microwave absorption of carbon nanotubes/CoFe2O4 spinel nanocomposite -: art. no. 033105

RC Che et al.

APPLIED PHYSICS LETTERS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.