☆ 4.8 Article

Investigating the Potential of Electroless Nickel Plating for Fabricating Ultra-Porous Metal-Based Lattice Structures Using PolyHIPE Templates

ACS APPLIED MATERIALS & INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Particle-reinforced ultralight hollow Ni-P-B4C microlattice composite materials

Jinbo Liu et al.

Summary: By introducing boron carbide particles as reinforcements, polymer/Ni-P-B4C microlattice composite materials with diamond structure were prepared using 3D printing and electroless plating technology. Experimental results showed that the specific strength of the composite material was significantly improved by introducing B4C, attributed to the load transfer, shear band strengthening effect, and the obstacle effect of grain refinement on dislocations.

MATERIALS LETTERS (2023)

Add to Collection

Article Electrochemistry

A novel strategy for designable alloy coatings in electroless plating

Guixin Dai et al.

Summary: A novel strategy for the preparation of designable alloy coatings by Al-induced electroless plating combined with thermal diffusion was proposed. This method utilized Al-induced electroless plating to create multilayer coatings, which were then alloyed by thermal diffusion to form alloy coatings. The results showed that this method was feasible and successfully produced the desired alloy coatings.

TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2023)

Add to Collection

Article Mechanics

Stretching-dominated truss lattice materials: Elastic anisotropy evaluation, control, and design

Shuheng Wang et al.

Summary: In this paper, an analytical homogenization formula is derived for the effective elastic properties of truss lattice materials. The formula is based on the numerical representative volume element method and asymptotic homogenization method. It can handle the geometric parameters, elastic properties, and loading direction as independent variables without repeated modelling. The formula yields the same results as the meso-mechanics model by Gibson and Ashby, and it can evaluate and control the elastic properties of complex truss lattice structures conveniently. Design methodologies for stretching-dominated compound truss lattice structures with controllable anisotropy and optimal isotropic elasticity are proposed based on the analytical homogenization formula. The isotropy conditions and calculation results obtained from the formula are verified through the manufacturing and testing of 3D elastically isotropic truss lattice structures and 2D bi-material elastically isotropic lattice structures.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

Lijun Xiao et al.

Summary: Inspired by natural hollow structures, hollow lattice structures were designed and fabricated using 316L stainless steel through selective laser melting process. Experimental and numerical simulations demonstrated that the hollow beam cross-sections contributed to the stable crushing response of the lattice structures, with smooth post-yield behavior. The specific strength and energy absorption of the hollow lattice structures were found to be superior to many solid-strut lattice materials.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of Interconnected Pickering Polymerized High Internal Phase Emulsions Arrested Coalescence

Enes Durgut et al.

Summary: Emulsion templating is a method for producing highly porous and interconnected polymer foams. This study introduces a system using submicrometer polymer particles to stabilize emulsions, resulting in highly interconnected large pore structures. This production method offers an interesting alternative for applications that require large pore structures.

LANGMUIR (2022)

Add to Collection

Article Engineering, Chemical

Simultaneous hypercrosslinking and functionalization of polyHIPEs for use as coarse powder catalyst supports

Hande Barkan-Ozturk et al.

Summary: Porous polymers with organophosphorus functionalities were synthesized using particle and surfactant stabilized emulsion templates followed by low-cost hypercrosslinking strategies. The resulting polyHIPEs displayed high surface areas and phosphorus concentrations, and showed excellent catalytic performance in a Suzuki-Miyaura coupling reaction. The coarse powder form of the polyHIPEs allowed for easy catalyst recovery and reuse.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Materials Science, Composites

An Nylon lattice structure with improved mechanical property and energy absorption capability

Yong Zeng et al.

Summary: The mechanical behavior and energy-absorption capability of different lattice structures were studied. Quasi-static compression experiment and finite element simulation revealed their mechanical response and deformation mechanism. Impact resistance and specific energy absorption calculations were used to assess the energy absorption capacity. Comparison and analysis of different design schemes were conducted under the same conditions. The minimal surface structure (MSS) showed the best compression performance, while the composite scheme consisting of MSS and BCC structures effectively enhanced the impact-bearing capability and improved energy absorption performance.

COMPOSITES PART C: OPEN ACCESS (2022)

Add to Collection

Review Polymer Science

A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing

Marek Pagac et al.

Summary: This paper reviews three photopolymerization technologies and the mechanical properties of light-curable resin materials, as well as their practical applications. It aims to inspire further research in the field of photopolymerization technology, especially in the development of new materials and mathematical models.

POLYMERS (2021)

Add to Collection

Review Biotechnology & Applied Microbiology

Basic Principles of Emulsion Templating and Its Use as an Emerging Manufacturing Method of Tissue Engineering Scaffolds

Betul Aldemir Dikici et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Damage-tolerant architected materials inspired by crystal microstructure

Minh-Son Pham et al.

NATURE (2019)

Add to Collection

Article Automation & Control Systems

Phase change materials (PCM) based cold source for selective freezing 3D printing of porous materials

Feng Yang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Ni3P as a high-performance catalytic phase for the hydrodeoxygenation of phenolic compounds

Zhiquan Yu et al.

GREEN CHEMISTRY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Light-based additive manufacturing of PolyHIPEs: Controlling the surface porosity for 3D cell culture applications

Colin Sherborne et al.

MATERIALS & DESIGN (2018)

Add to Collection

Review Biophysics

3D printing processes for photocurable polymeric materials: technologies, materials, and future trends

Gabriele Taormina et al.

JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Engineering, Manufacturing

Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials

Oraib Al-Ketan et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection

Article Engineering, Biomedical

Emulsion templated scaffolds with tunable mechanical properties for bone tissue engineering

Robert Owen et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)

Add to Collection

Article Polymer Science

Emulsion Inks for 3D Printing of High Porosity Materials

Nicholas A. Sears et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Acoustic properties of a porous polycarbonate material produced by additive manufacturing

Zhengqing Liu et al.

MATERIALS LETTERS (2016)

Add to Collection

Article Materials Science, Biomaterials

Photocurable high internal phase emulsions (HIPEs) containing hydroxyapatite for additive manufacture of tissue engineering scaffolds with multi-scale porosity

Ai-juan Wang et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Diamond-structured hollow-tube lattice Ni materials via 3D printing

Jingjing Xu et al.

SCIENCE CHINA-CHEMISTRY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Image analysis characterization of periodic porous materials produced by additive manufacturing

N. Vanderesse et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Method for electroless nickel plating on poly(ethylene terephthalate) substrate modified with primer and self-assembled monolayer

Zhiping Sun et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Preparation of Nanostructured Microporous Metal Foams through Flow Induced Electroless Deposition

Galip Akay et al.

JOURNAL OF NANOMATERIALS (2015)

Add to Collection

Review Biotechnology & Applied Microbiology

Polymers for medical and tissue engineering applications

Deniz Ozdil et al.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2014)

Add to Collection

Review Polymer Science

PolyHIPEs: Recent advances in emulsion-templated porous polymers

Michael S. Silverstein

PROGRESS IN POLYMER SCIENCE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Macrostructuring of Emulsion-templated Porous Polymers by 3D Laser Patterning

David W. Johnson et al.

ADVANCED MATERIALS (2013)

Add to Collection

Editorial Material Multidisciplinary Sciences

Toward Lighter, Stiffer Materials

Tobias A. Schaedler et al.

SCIENCE (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Microlattices as architected thin films: Analysis of mechanical properties and high strain elastic recovery

Kevin J. Maloney et al.

APL MATERIALS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Unintended Phosphorus Doping of Nickel Nanoparticles during Synthesis with TOP: A Discovery through Structural Analysis

Liane M. Moreau et al.

NANO LETTERS (2012)

Add to Collection

Article Biochemistry & Molecular Biology

Polycaprolactone Scaffolds Fabricated with an Advanced Electrohydrodynamic Direct-Printing Method for Bone Tissue Regeneration

Seung Hyun Ahn et al.

BIOMACROMOLECULES (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Study of Ni-catalyst for electroless Ni-P deposition on glass fiber

Libo Li et al.

MATERIALS CHEMISTRY AND PHYSICS (2011)

Add to Collection

Article Multidisciplinary Sciences

Ultralight Metallic Microlattices

T. A. Schaedler et al.

SCIENCE (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Ultralight Multiwalled Carbon Nanotube Aerogel

Jianhua Zou et al.

ACS NANO (2010)

Add to Collection

Article Physics, Applied

Fabrication of a bunch of sub-30-nm nanofibers inside microchannels using photopolymerization via a long exposure technique

Sang Hu Park et al.

APPLIED PHYSICS LETTERS (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis, characterization and thermal stability of Ni3P coatings on nickel

H Pfeiffer et al.

MATERIALS CHEMISTRY AND PHYSICS (2005)

Add to Collection

Article Polymer Science

High internal phase emulsion templating as a route to well-defined porous polymers

NR Cameron

POLYMER (2005)

Add to Collection

Article Polymer Science

Morphology and surface area of emulsion-derived (PolyHIPE) solid foams prepared with oil-phase soluble porogenic solvents: Three-component surfactant system

A Barbetta et al.

MACROMOLECULES (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Effective properties of the octet-truss lattice material

VS Deshpande et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.