4.8 Article

Improved Carrier Lifetimes of CdSe Thin Film via Te Doping for Photovoltaic Application

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin-Film Solar Cell

Yandi Luo et al.

Summary: By introducing aluminum (Al3+) cation into the CdS buffer layer, this study improves the heterojunction interface of an Sb2Se3 solar cell. The energy band alignment of the Sb2Se3/CdS:Al heterojunction is modified from a cliff-like structure to a spike-like structure. As a result, the heterojunction interface engineering suppresses recombination losses and strengthens carrier transport, leading to a high efficiency of 8.41% for the substrate-structured Sb2Se3 solar cell. This study proposes a facile strategy for interfacial treatment and elucidates the related carrier transport enhancement mechanism, paving a bright avenue to overcome the efficiency bottleneck of Sb2Se3 thin-film solar cells.

ADVANCED FUNCTIONAL MATERIALS (2023)

Article Materials Science, Multidisciplinary

Carrier recombination suppression and transport enhancement enable high-performance self-powered broadband Sb2Se3 photodetectors

Shuo Chen et al.

Summary: This study presents a two-step thermodynamic/kinetic deposition technique to synthesize Sb2Se3 light absorbing thin film with large crystal grains and desirable orientation, and introduces aluminum cation dopant to modify the optoelectronic properties of CdS buffer layer. The resulting Mo/Sb2Se3/CdS (Al)/ITO/Ag photodetector exhibits self-powered and broadband characteristics with high responsivity, linear dynamic range, ON/OFF switching ratio, signal-to-noise ratio, realistic detectivity, and fast response speed, representing the top level for Sb2Se3-based photodetectors. This work opens up possibilities for self-powered broadband photodetector applications.

INFOMAT (2023)

Article Chemistry, Multidisciplinary

Heterojunction Annealing Enabling Record Open-Circuit Voltage in Antimony Triselenide Solar Cells

Rong Tang et al.

Summary: This study reports an effective interface engineering approach using rapid thermal annealing to suppress nonradiative recombination near the Sb2Se3/CdS heterojunction, improving the performance of thin-film solar cells.

ADVANCED MATERIALS (2022)

Article Multidisciplinary Sciences

All-perovskite tandem solar cells with improved grain surface passivation

Renxing Lin et al.

Summary: Researchers have developed ammonium-cation-passivated Pb-Sn perovskites with long diffusion lengths, enabling high-efficiency all-perovskite tandem solar cells. By enhancing the adsorption of the passivator using a stronger surface-passivator interaction, the carrier diffusion length within Pb-Sn perovskites is doubled, resulting in an efficiency of over 22%. The certified efficiency of 26.4% achieved in the all-perovskite tandem solar cells exceeds that of the best-performing single-junction perovskite solar cells.

NATURE (2022)

Article Chemistry, Multidisciplinary

Crystal Growth Promotion and Defects Healing Enable Minimum Open-Circuit Voltage Deficit in Antimony Selenide Solar Cells

Guangxing Liang et al.

Summary: An effective absorber layer growth engineering is developed to grow high-quality Sb2Se3 films for thin-film solar cells. This engineering effort significantly improves the device efficiency by mitigating open-circuit voltage deficit, thanks to the repaired defects and improved charge transport.

ADVANCED SCIENCE (2022)

Article Chemistry, Physical

Fabrication and Optimization of CdSe Solar Cells for Possible Top Cell of Silicon-Based Tandem Devices

Kanghua Li et al.

Summary: Silicon-based tandem solar cells are considered as an effective method to improve the efficiency and reduce the cost of solar electricity. Recent research has focused on using wide-bandgap perovskite solar cells as the top cell for Si-based tandem devices. However, the instability of perovskite materials has been a major concern. In this study, the neglected CdSe thin-film solar cells were revisited and achieved a champion efficiency of 6.00%. Defects in bulk and interface were identified as the limiting factors for the performance of these cells. This work highlights the great potential of CdSe solar cells as top cells for Si-based tandem devices.

ADVANCED ENERGY MATERIALS (2022)

Article Energy & Fuels

Understanding what limits the voltage of polycrystalline CdSeTe solar cells

Arthur Onno et al.

Summary: In this study, the authors conducted a comprehensive analysis of voltage losses in polycrystalline cadmium selenide telluride solar cells using photoluminescence techniques. They found that the dopant species and concentration, as well as the back contact, play a significant role in voltage losses. They also highlighted the importance of developing contact structures that are both passivating and selective, along with highly luminescent absorbers, to reduce voltage losses.

NATURE ENERGY (2022)

Article Physics, Condensed Matter

DASP: Defect and Dopant ab-initio Simulation Package

Menglin Huang et al.

Summary: The Defect and Dopant ab-initio Simulation Package (DASP) is a software package developed for automated calculations of defect and dopant properties in semiconductors and insulators. It consists of four modules for calculating elemental chemical potentials, defect (dopant) formation energies and charge-state transition levels, defect and carrier densities, and carrier dynamics properties of high-density defects.

JOURNAL OF SEMICONDUCTORS (2022)

Article Computer Science, Interdisciplinary Applications

Nonrad: Computing nonradiative capture coefficients from first principles

Mark E. Turiansky et al.

Summary: This paper presents a first-principles methodology for calculating nonradiative capture rates, emphasizing the impact of point defects on the performance of semiconductor devices. It discusses the approach for evaluating electron-phonon coupling and corrects errors in capture rate calculation.

COMPUTER PHYSICS COMMUNICATIONS (2021)

Review Energy & Fuels

CdTe-Based Thin Film Solar Cells: Past, Present and Future

Alessandro Romeo et al.

Summary: CdTe solar cells, known for their robustness and stability, have become a leading thin film technology in the world. Over the past few decades, significant advancements have been made in improving the efficiency of CdTe solar cells. Future research may focus on alternative absorbers and addressing potential environmental impacts of this technology.

ENERGIES (2021)

Article Energy & Fuels

Exceeding 200 ns Lifetimes in Polycrystalline CdTe Solar Cells

Tursun Ablekim et al.

Summary: By using large CdSeTe grains at the absorber/emitter interface, intragrain passivation in the absorber layer, and chemical passivation by forming nanoscale oxidized tellurium species at the transparent conducting oxide interface, the carrier lifetime in CdTe solar cells has significantly increased to values exceeding 200 ns.

SOLAR RRL (2021)

Article Engineering, Electrical & Electronic

Rapid thermal evaporation for cadmium selenide thin-film solar cells

Kanghua Li et al.

Summary: CdSe, with a direct bandgap of 1.7 eV, demonstrates promising potential as a top cell material in silicon-based tandem solar cells. Research on CdSe thin-film solar cells is limited, but this study successfully achieved a preliminary efficiency of 1.88% through rapid thermal evaporation, highlighting the applicability and advantages of CdSe in photovoltaic devices.

FRONTIERS OF OPTOELECTRONICS (2021)

Review Engineering, Electrical & Electronic

Possible top cells for next-generation Si-based tandem solar cells

Shuaicheng Lu et al.

FRONTIERS OF OPTOELECTRONICS (2020)

Article Materials Science, Multidisciplinary

Understanding the physical properties of CdCl2 treated thin CdSe films for solar cell applications

S. L. Patel et al.

OPTICAL MATERIALS (2019)

Proceedings Paper Energy & Fuels

Efficient Heterojunction Thin Film CdSe Solar Cells Deposited Using Thermal Evaporation

Behrang Bagheri et al.

2019 IEEE 46TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) (2019)

Article Multidisciplinary Sciences

Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency

Xixing Wen et al.

NATURE COMMUNICATIONS (2018)

Review Nanoscience & Nanotechnology

Harnessing singlet exciton fission to break the Shockley-Queisser limit

Akshay Rao et al.

NATURE REVIEWS MATERIALS (2017)

Review Engineering, Electrical & Electronic

Review on first-principles study of defect properties of CdTe as a solar cell absorber

Ji-Hui Yang et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2016)

Editorial Material Energy & Fuels

Selecting tandem partners for silicon solar cells

Zhengshan (Jason) Yu et al.

NATURE ENERGY (2016)

Article Physics, Applied

Thermal evaporation and characterization of superstrate CdS/Sb2Se3 solar cells

Miao Luo et al.

APPLIED PHYSICS LETTERS (2014)

Article Materials Science, Multidisciplinary

First-principles theory of nonradiative carrier capture via multiphonon emission

Audrius Alkauskas et al.

PHYSICAL REVIEW B (2014)

Article Geochemistry & Geophysics

Oxide-melt solution calorimetry of selenides: Enthalpy of formation of zinc, cadmium, and lead selenide

Suraj Deore et al.

AMERICAN MINERALOGIST (2008)

Article Materials Science, Multidisciplinary

Transparent high-performance CDSE thin-film solar cells

P Mahawela et al.

THIN SOLID FILMS (2005)