☆ 4.8 Article

Hydrogel-Anchored Fe-Based Amorphous Coatings with Integrated Antifouling and Anticorrosion Functionality

ACS APPLIED MATERIALS & INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Fe-based metallic glass coatings by thermal spraying: a focused review on corrosion properties and related degradation mechanisms

Sapan K. Nayak et al.

Summary: Thermal sprayed Fe-based metallic glass coatings (MGCs) have gained significant attention due to their exceptional combination of mechanical and corrosion properties, along with low material cost. Reports on their superiority over conventional corrosion-resistant materials have led to increased research activities, resulting in fascinating results. This review provides a comprehensive assessment of corrosion properties, degradation mechanisms, metallurgical and environmental factors, passive film dynamics, and corrosion product formation, while discussing strategies for improved corrosion properties and recent research progress.

INTERNATIONAL MATERIALS REVIEWS (2023)

Add to Collection

Article Chemistry, Physical

Microbe-induced pitting of Fe-based amorphous coating

Ling-Yu Zhang et al.

Summary: In this study, the microbe-induced corrosion (MIC) mechanism of an Fe-based amorphous coating in the presence of Pseudomonas aeruginosa was investigated. The results showed that P. aeruginosa reduced the corrosion resistance of the coating and formed a thick biofilm, leading to thinning of the underlying passive film. Based on these findings, a MIC mechanism based on the extracellular electron transfer effect was proposed, and a potential strategy to alleviate MIC was examined.

INTERMETALLICS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Improved Antifouling Ability for Double-Network Hydrogel Coatings with Excellent Elastic and Toughness under Marine Tidal Environment

Xinglinmao Li et al.

Summary: The marine coating in the tidal zone plays a crucial role in restoring its protective function by addressing coating defects caused by wet and dry alternation and sand and gravel impact. Hydrophilic materials like hydrogel have been used to transform the tidal zone into an immersion zone, effectively reducing fouling issues through copper complexation. The AAm/Alginate-Ca/Cu-BTA coating exhibits excellent mechanical properties and adhesion, and hydrogels show promising performance in alternating dry and wet environments, proving their application potential in marine tidal zones.

ADVANCED ENGINEERING MATERIALS (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Bioinspired marine antifouling coatings: Status, prospects, and future

Huichao Jin et al.

Summary: This review focuses on six major bioinspired antifouling strategies, discusssing their mechanisms, fabrication methods, and current issues. It also introduces the multifunctional bioinspired antifouling strategy, combining the strengths of multiple approaches to potentially enhance the coatings' antifouling capabilities and lifespan, opening a new horizon for the future development of bioinspired marine antifouling coatings.

PROGRESS IN MATERIALS SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Bioinspired antifouling Fe-based amorphous coating via killing-resisting dual surface modifications

Yu Li et al.

Summary: In this study, a bioinspired Fe-based amorphous coating with killing-resisting dual-effect was developed by modifying the surface with micro-patterned nanostructured Cu2O fibers and superhydrophobic surface. The modified coating showed impressive antifouling properties and excellent mechanical robustness, which may contribute to the development of new durable metal-based coatings with anti-fouling and anti-corrosion properties.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Recent advances in emerging integrated antifouling and anticorrosion coatings

Huichao Jin et al.

Summary: With the rapid development of the marine industry, biofouling and surface corrosion of underwater equipment have become a major issue. Integrated antifouling and anti-corrosion coatings (IAACs) show promise in addressing these challenges by combining different functionalities. However, further research and development are needed to mature these emerging IAACs for practical applications and commercialization.

MATERIALS & DESIGN (2022)

Add to Collection

Article Materials Science, Coatings & Films

Fabrication of Porous Aluminum Coating by Cored Wire Arc Spray for Anchoring Antifouling Hydrogel Layer

Jianxin Wen et al.

Summary: The study addressed the poor adhesion of hydrogel on steel surfaces by fabricating porous aluminum coatings, which significantly enhanced the adhesion of hydrogel through the porous structure. Additionally, the hydrogel coating exhibited very encouraging antifouling properties.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Accelerated biocorrosion of stainless steel in marine water via extracellular electron transfer encoding gene phzH of Pseudomonas aeruginosa

Enze Zhou et al.

Summary: Microbiologically influenced corrosion (MIC) frequently occurs in water/wastewater systems, especially in marine water. Pseudomonas aeruginosa, a marine electro-active bacterium, has been confirmed to cause severe MIC on carbon steel through extracellular electron transfer (EET), but little is known about its corrosion on stainless steel. This study found that the accelerated MIC on 2205 duplex stainless steel (DSS) was due to the secretion of phenazine-1-carboxamide (PCN), which is regulated by the phzH gene. The findings provide new insights into the MIC mechanisms on stainless steel.

WATER RESEARCH (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Nontoxic Liquid-Infused Slippery Coating Prepared on Steel Substrates Inhibits Corrosion and Biofouling Adhesion

Alexander B. Tesler et al.

Summary: Wetting of surfaces is important in biological and industrial processes, but related problems still remain unsolved, affecting the safety and expenses of modern society. In this study, we investigated the application of a new nontoxic repellent technology, LISS, on metallic substrates, which showed excellent anti-corrosion and anti-biofouling characteristics even on severely damaged surfaces.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Antifouling nanocomposite polymer coatings for marine applications: A review on experiments, mechanisms, and theoretical studies

Sepideh Pourhashem et al.

Summary: Antifouling nanocomposite coatings are a novel generation of antifouling technology that improves fouling resistance by incorporating nanomaterials into polymer coatings, demonstrating excellent antifouling properties. The key factors for this technology include the selection of nanomaterials, dispersion methods, and compatibility with the polymer matrix, which play important roles in enhancing antifouling efficiency and performance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Multidisciplinary Sciences

Controlled tough bioadhesion mediated by ultrasound

Zhenwei Ma et al.

Summary: This study introduces an ultrasound-mediated strategy to achieve tough bioadhesion with controllability and fatigue resistance, significantly expanding the material repertoire for bioadhesion technologies.

SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Environmentally benign smart self-healing silicone-based coating with dual antifouling and anti-corrosion properties

Jiawen Sun et al.

Summary: This study aims to develop a novel smart silicone-based coating with dual antifouling and anticorrosion properties. The coating has good toughness, high stretchability, and self-healing properties. Experimental results show that scratches on the film can completely disappear within a short time at room temperature, and the healing efficiency of the coating is also high. In addition, the coating has long-term fouling-resistant properties and corrosion resistance.

APPLIED MATERIALS TODAY (2022)

Add to Collection

Article Materials Science, Ceramics

The influence of laser surface texture parameters on the hydrophobic properties of Fe-based amorphous coatings

Wang Lin-ting et al.

Summary: The paper focuses on obtaining texture with different shape parameters on a Fe-base amorphous alloy coating through laser modification. The effects of different parameters on hydrophobicity and its mechanism are also investigated. The experimental results show that the coatings with pits and honeycomb textures have the best hydrophobicity angles, and the hydrophobic angle of the pitted texture decreases with the increase of the center distance.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2022)

Add to Collection

Article Engineering, Environmental

Fouling resistant silicone coating with self-healing induced by metal coordination

Peng Hu et al.

Summary: The new poly(dimethylsiloxane) coating cross-linked via coordination bonds between 2-(2-benzimidazolyl)ethanethiol (BET) and zinc ions shows improved adhesion strength and self-healing ability, leading to enhanced fouling resistance against marine bacteria and diatoms. The presence of zinc-imidazole complexes further contributes to the antifouling function of the coating.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Crystallization-dependent transition of corrosion resistance of an Fe-based bulk metallic glass under hydrostatic pressures

Zhen Gan et al.

Summary: The study found that in the crystallization-dependent transition of corrosion resistance of an Fe-based bulk metallic glass, corrosion resistance remains almost unaffected when the crystallized volume fracture is below 30%, but decreases significantly when above 30%, with stable pitting induced by micro galvanic effects dominating the corrosion behavior.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Coatings & Films

Effect of coating composition on the micro-galvanic dissolution behavior and antifouling performance of plasma-sprayed laminated-structured Cu-Ti composite coating

Jia-Jia Tian et al.

Summary: The Cu-Ti coating with varying copper content showed influence on its micro-galvanic dissolution behavior and antifouling performance, with higher copper content leading to increased copper ions release rate and antifouling duration against bacterial survival. Electrochemical tests revealed that the amount of micro-galvanic cells, rather than the dissolution rate of each single micro-cell, played a more prominent role in deciding the total copper dissolution rate and antifouling capabilities.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Fabrication of bio-based amphiphilic hydrogel coating with excellent antifouling and mechanical properties

Guangming Lu et al.

Summary: A bio-based amphiphilic hydrogel coating with excellent antifouling and mechanical properties was reported, achieved by in-situ formation of hydrophobic and hydrophilic interpenetrating polymer network. The coating showed superior mechanical properties and excellent resistance to fouling of proteins, bacteria, and microorganisms. Field test in East China Sea confirmed the intact and almost no marine organisms attached to the coating, providing a new strategy for the fabrication of bio-based and high-performance antifouling coatings.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Materials Science, Biomaterials

Engineering Hydrogel Adhesion for Biomedical Applications via Chemical Design of the Junction

Giovanni Bovone et al.

Summary: Hydrogel adhesion relies on engineering the contact surface at soft and hydrated interfaces, forming adhesion junctions through chemical or physical interactions. Designing the binding chemistries or adhesion junctions, whether covalent, dynamic covalent, supramolecular, or physical, is linked to the emergent adhesive properties of soft and hydrated interfaces, useful for bonding in biomedical applications. Main focus is on engineering hydrogel adhesion through molecular design of the junctions to tailor the adhesion strength, reversibility, stability, and response to environmental stimuli.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Bioinspired Durable Antibacterial and Antifouling Coatings Based on Borneol Fluorinated Polymers: Demonstrating Direct Evidence of Antiadhesion

Fan Song et al.

Summary: A polymer coating made from natural substances with excellent antibacterial and antifouling properties was reported. The coating incorporating fluorine elements and borneol demonstrated exceptional environmental friendliness and long-term stability.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Adaptive Coatings with Anticorrosion and Antibiofouling Properties

Tiwa Yimyai et al.

Summary: Redox-responsive copolymer conjugates are synthesized and utilized as coatings with dual functions of biofouling and corrosion mitigation, attributing to the cooperation of fluorinated units and the corrosion inhibitor MBT conjugated via disulfide linkages.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Electron transfer mediator PCN secreted by aerobic marine Pseudomonas aeruginosa accelerates microbiologically influenced corrosion of TC4 titanium alloy

Dan Liu et al.

Summary: The marine microorganism Pseudomonas aeruginosa can cause microbiologically influenced corrosion of titanium alloys, resulting in unstable surfaces and severe pitting corrosion. The secretion of PCN by P. aeruginosa promotes corrosion, and deletion of the corresponding gene significantly decreases corrosion rates.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Significantly enhanced resistance to SRB corrosion via Fe-based amorphous coating designed with high dose corrosion-resistant and antibacterial elements

L. M. Zhang et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Silicone-Based Fouling-Release Coatings for Marine Antifouling

Peng Hu et al.

LANGMUIR (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Developments and Practical Feasibility of Polymer-Based Antifouling Coatings

Anna M. C. Maan et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Recent Progress of Biomimetic Antifouling Surfaces in Marine

Hao Yan et al.

ADVANCED MATERIALS INTERFACES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Al2O3 particles on the adhesion, wear, and corrosion performance of epoxy coatings for protection of umbilical cables accessories for subsea oil and gas production systems

Jhonny Dias Oliveira et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Materials Science, Coatings & Films

Wear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: A review

Bo Huang et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Fe-based bulk metallic glasses: Glass formation, fabrication, properties and applications

H. X. Li et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection

Review Chemistry, Physical

Dynamic surface antifouling: mechanism and systems

Qingyi Xie et al.

SOFT MATTER (2019)

Add to Collection

Article Chemistry, Physical

Effect of hydrostatic pressure on the corrosion behavior of HVOF-sprayed Fe-based amorphous coating

Cheng Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Coatings & Films

A super-hard superhydrophobic Fe-based amorphous alloy coating

Jiang-hao Qiao et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Recent progress in marine foul-release polymeric nanocomposite coatings

M. S. Selim et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection

Article Multidisciplinary Sciences

Preventing mussel adhesion using lubricant-infused materials

Shahrouz Amini et al.

SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Macrofouling induced localized corrosion of stainless steel in Singapore seawater

Daniel J. Blackwood et al.

CORROSION SCIENCE (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Amorphous Coatings and Surfaces on Structural Materials

Sameehan S. Joshi et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Characterisation of three-dimensional porosity in an Fe-based amorphous coating and its correlation with corrosion behaviour

S. D. Zhang et al.

CORROSION SCIENCE (2015)

Add to Collection

Review Chemistry, Applied

Chemical adhesion of silicone elastomers on primed metal surfaces: A comprehensive survey of open and patent literatures

Loic Picard et al.

PROGRESS IN ORGANIC COATINGS (2015)

Add to Collection

Article Multidisciplinary Sciences

Mussel adhesion is dictated by time-regulated secretion and molecular conformation of mussel adhesive proteins

Luigi Petrone et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Multidisciplinary Sciences

Extremely durable biofouling-resistant metallic surfaces based on electrodeposited nanoporous tungstite films on steel

Alexander B. Tesler et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance

Cheng Zhang et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Fe-based amorphous coatings: Structures and properties

Lin Liu et al.

THIN SOLID FILMS (2014)

Add to Collection

Review Microbiology

Marine biofilms on artificial surfaces: structure and dynamics

Maria Salta et al.

ENVIRONMENTAL MICROBIOLOGY (2013)

Add to Collection

Article Materials Science, Coatings & Films

On the bonding strength in thermally sprayed Fe-based amorphous coatings

Y. Peng et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Add to Collection

Article Physics, Applied

Robust hydrophobic Fe-based amorphous coating by thermal spraying

C. Zhang et al.

APPLIED PHYSICS LETTERS (2012)

Add to Collection

Review Chemistry, Multidisciplinary

Antifouling Coatings: Recent Developments in the Design of Surfaces That Prevent Fouling by Proteins, Bacteria, and Marine Organisms

Indrani Banerjee et al.

ADVANCED MATERIALS (2011)

Add to Collection

Article Engineering, Biomedical

Formation of OTS self-assembled monolayers at chemically treated titanium surfaces

Elnaz Ajami et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2011)

Add to Collection

Review Multidisciplinary Sciences

Trends in the development of environmentally friendly fouling-resistant marine coatings

James A. Callow et al.

NATURE COMMUNICATIONS (2011)

Add to Collection

Review Materials Science, Multidisciplinary

Non-toxic antifouling strategies

Chelsea M. Magin et al.

MATERIALS TODAY (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Iron-Based Amorphous Metals: High-Performance Corrosion-Resistant Material Development

Joseph Farmer et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)

Add to Collection

Article Chemistry, Multidisciplinary

A survey of structure-property relationships of surfaces that resist the adsorption of protein

E Ostuni et al.

LANGMUIR (2001)

Add to Collection

Article Environmental Sciences

Sea-nine antifoulant: an environmentally acceptable alternative to organotin antifoulants

AH Jacobson et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2000)

Add to Collection

Article Biotechnology & Applied Microbiology

Mechanical factors favoring release from fouling release coatings

RF Brady et al.

BIOFOULING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.