Related references
Note: Only part of the references are listed.
Article
Chemistry, Physical
Junjun Peng et al.
Summary: Converting waste cotton fabric into graphitized carbon/Fe7S8 composites shows promise as a sustainable and high-performance material for electrochemical sodium storage.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Qianqian Sun et al.
Summary: In this study, NiSe2 nanoparticles decorated flower-like MoSe2 nanosheets confined in N-doped carbon spheres were synthesized. The heterostructure between NiSe2 and MoSe2 can provide more redox chemistry and synergistic effects, while the N-doped carbon matrix can protect MoSe2 from agglomeration and facilitate electron transport.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Multidisciplinary
Zhihao Xiong et al.
Summary: Due to the pressure on lithium resources, low-cost sodium-ion batteries (SIBs) have emerged as the most potential candidates for energy storage systems in the new era. This study proposes V2C/Fe7S8@C composites with hierarchical structures, prepared through an in situ synthesis method, to address the problem of anode materials in SIBs development. The V2C-MXene growth substrate greatly improves the rate capability of SIBs, while the carbon layer ensures charge-discharge stability. The V2C/Fe7S8@C anode achieves satisfactory sodium storage capacity and exceptional rate performance, making it a promising material for energy storage.
Article
Chemistry, Physical
Changling Fan et al.
Summary: In this study, a novel epoxy phenol novolac resin was used as a precursor to synthesize excellent electrochemical performance anode for sodium-ion batteries by pyrolysis at different temperatures. The adsorption-intercalation-filling mechanism for sodium storage in the material was verified, and the potential of commercialization for the anode material was proposed.
Article
Chemistry, Physical
Zhenyu Cheng et al.
Summary: This paper successfully prepares nano-sized porous Fe7S8 anode material for sodium-ion batteries. The obtained material exhibits high energy storage capacity, stable cycling and rate performance. It shows a reversible specific capacity of 413.9 mAh g-1 after 100 cycles at a current density of 500 mA g-1, and a reversible capacity of 390.2 mAh g-1 at a high current density of 1 A g-1. The synthetic material has excellent research potential and is expected to be used in high-performance sodium-ion batteries with practical efficacy.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Chemistry, Physical
Hongyan Zhou et al.
Summary: In this study, a flower-like Ni2P/CoP@rGO heterostructures were designed and used as anodes for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). The heterostructures showed abundant heterointerfaces, vacancies, and high specific surfaces, which improved the transport kinetics of Li-ion/Na-ion and increased reaction active sites. The introduction of graphene enhanced structural stability and accelerated the charge transfer rate. This work demonstrated that rational design of heterostructure materials is a feasible strategy for achieving high-performance energy storage.
JOURNAL OF POWER SOURCES
(2023)
Article
Materials Science, Multidisciplinary
Lu Chen et al.
Summary: Hierarchical honeycomb carbon with abundant macropores, mesopores, and micropores was fabricated using SiO2 nanospheres and microspheres as templates, diverse boiling bubbles as the soft template, and polyvinyl pyrrolidone as the assembling agent and carbon source. The calcined hierarchical honeycomb carbon at 1000 degrees C exhibited a discharge capacity of 146 mAh/g at 1 A/g after 3000 cycles, an average discharge capacity of 206 mAh/g at 0.5 A/g, and 98 mAh/g at 5 A/g. The excellent performance of this carbon material, including high reversible capacity, stable cycling performance, and good rate capability, can be attributed to its hierarchical honeycomb porous structure with high defects, high porosity, and large surface area, making it a promising anode material for sodium-ion batteries.
Article
Chemistry, Physical
Chenyu Zhao et al.
Summary: In this study, N, S co-doped carbon-coated Fe7S8 was constructed as an anode material for sodium-ion batteries, showing a significant increase in storage capacity. Comprehensive characterizations revealed that the capacity growth originated from both the reduced FeSx particle size and the Cu-triggered phase transition. Cu2O and Cu-0 were gradually formed as the cycle number increased, possibly due to side reactions between Cu+ and electrolyte components. Moreover, the Cu-related phase transition accelerated the corrosion of Cu foil, weakening the adhesion of active materials and causing capacity attenuation after a certain number of cycles.
APPLIED SURFACE SCIENCE
(2023)
Article
Engineering, Environmental
Deliang Cheng et al.
Summary: By employing one-step plasma-assisted milling, a micro/nanostructured SnS/Fe2O3-G heterostructure was constructed through the in-situ vulcanization of Sn with the nanospace confinement of Fe2O3 and graphene. The SnS/Fe2O3-G heterostructure benefits from accelerated charge transfer, enhanced Na+ diffusion/adsorption kinetics, and stable electrochemical framework, greatly improving the rate capability and cyclic stability of SnS.
CHEMICAL ENGINEERING JOURNAL
(2023)
Review
Chemistry, Multidisciplinary
Mingnan Li et al.
Summary: Lithium metal batteries (LMBs) have high energy density but face challenges with the instability of the Li metal/electrolyte interface. This review provides a systematic summary of recent progress in electrolytes for high-performance LMBs, including understanding the mechanism, addressing challenges, and analyzing various electrolyte strategies. Suggestions for optimum electrolyte properties and promising research directions are also discussed.
Article
Chemistry, Physical
Yuanchang Li et al.
Summary: A Fe7S8-MoS2 heterostructure decorated on few layers MoS2-embeded N-/P-doping carbon nanocapsule has been developed as a high efficient sulfur host for Li-S batteries, confining and catalyzing the soluble lithium polysulfide to enhance the adsorption abilities and conversion kinetics. The synergistic coupling between the Fe7S8-MoS2 heterojunction catalyst and the carbon architecture enables excellent rate capability and cycle performances for Li-S batteries.
APPLIED SURFACE SCIENCE
(2022)
Article
Engineering, Environmental
Jiali Jiang et al.
Summary: Integrating N, P-functionalized carbon frameworks with FeP nanoparticles through recrystallization self-assembly process results in a unique heterostructure that enhances kinetics reaction and structural stability, reducing fracture and aggregation risks. The FeP@PNC electrode shows superior reversible capability, rate capability, and prolonged cycling life for sodium storage, attributed to the promotion of charge transfer and interaction between active nanoparticles and Na atoms facilitated by the interface between FeP and carbon with vacancy.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Green & Sustainable Science & Technology
Shuang Wang et al.
Summary: A conduct-semiconductor-type catalyst Fe7S8@MoS2-O with strong visible light absorption and long carrier life was synthesized using the one-pot hydrothermal method. The catalyst showed high efficiency in the degradation of malachite green and levofloxacin, which could be further enhanced by peroxymonosulfate. It also exhibited good disinfection performance for Staphylococcus aureus and Escherichia coli. The band structures of the catalyst were analyzed using density functional theory calculations.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Materials Science, Multidisciplinary
Huijun Li et al.
Summary: The research presents a new synthesis strategy for a novel self-supporting anode material, demonstrating improved sodium storage performance by combining nickel, nitrogen co-doped graphitized carbon and cobalt phosphide embedded in carbon fiber, addressing issues such as volume expansion and poor electronic conductivity of transition-metal phosphides, achieving outstanding electrochemical performance.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
(2022)
Article
Chemistry, Physical
Zhonghui Sun et al.
Summary: Researchers have developed an advanced anode material for sodium-ion batteries, which consists of CoSe nanocrystals coated with N-doped carbon and encapsulated in S-doped carbon nanosheets. This design improves electronic conductivity and ion transfer, leading to high energy storage capacity and long cycling stability.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Chemistry, Physical
Tzu-Yang Cheng et al.
Summary: This article describes the synthesis of stable S,N co-doped graphene oxide quantum dots (S,N-GOQDs) and their optoelectrical applications. The S,N-GOQDs exhibit high yield and excitation-independent emission, making them suitable for use as emitters in light-emitting diode devices and as photocatalysts for energy conversion.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Chemistry, Multidisciplinary
Young Hwan Kim et al.
Summary: This study developed a stable 3D graphene host to effectively suppress the growth of Li dendrites in Li-metal anodes and withstand repeated volume changes. The host has high mechanical resilience and maintains a stable coulombic efficiency of 99% over 500 cycles.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Engineering, Environmental
Xu Xie et al.
Summary: Bimetallic selenides with modified band structure were constructed to enhance the diffusion rate of sodium ions. The experimental results demonstrated that bimetallic selenides exhibited superior cycle and rate performance, and the in-situ testing and calculations revealed their reaction mechanisms.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Multidisciplinary
Zhenzhu Wang et al.
Summary: This study reports on the design and construction of BixSb1-x bimetallic alloy films with a compositional gradient to mitigate the intrinsic structural instability, which show a high reversible capacity and capacity retention during extended cycling.
Article
Chemistry, Physical
Shuaiguo Zhang et al.
Summary: This study demonstrates the potential of selenium-doped iron-based sulfides in sodium-ion battery anodes through the synthesis and performance testing of carbon nanotube-modified selenium-doped Fe7S8 (Fe7S8-xSex/CNTs) materials.
JOURNAL OF POWER SOURCES
(2022)
Article
Chemistry, Multidisciplinary
Chongwei Li et al.
Summary: In this study, NiS2@SnS2 hybrid spheres were delicately designed and constructed to improve the performance of tin-based sulfides as anodes for sodium-ion batteries. The NiS2@SnS2 hybrid composite demonstrated excellent high-rate and durable sodium storage behaviors, providing guidance for fabricating other high-performance SIBs with transition metal-based composite anodes.
SCIENCE CHINA-CHEMISTRY
(2022)
Article
Chemistry, Multidisciplinary
Peng Zhou et al.
Summary: In this study, Zn-Mn binary selenides composites were fabricated by selenizing the modified hierarchically metal-organic frameworks. The composites showed excellent ion diffusion and cyclic stability, making them promising materials for sodium-ion batteries and potassium-ion batteries.
Article
Chemistry, Multidisciplinary
Lei Huang et al.
Summary: In this study, a synergistic interface bonding enhancement strategy was reported to construct flexible fiber-shaped composite cathodes. Polypyrrole@sulfur (PPy@S) nanospheres were implanted into the built-in cavity of self-assembled reduced graphene oxide fibers (rGOFs) using a facile microfluidic assembly method. The resulting cathode showed enhanced electrochemical performance and high-rate capability.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Physical
Yun-Lei Hou et al.
Summary: Transition metal sulfide has been anticipated as a promising anode material for high performance lithium-ion batteries. In this study, a spindle-like Fe7S8/C@rGO composite was synthesized and showed superior electrochemical properties and extraordinary electrical conductivity. The addition of rGO effectively increased the extra reversible capacity of Fe7S8/C@rGO.
APPLIED SURFACE SCIENCE
(2022)
Article
Chemistry, Physical
Mixue Lu et al.
Summary: In this study, self-supporting nanosheet arrays of Modoped CoSe2 encapsulated in N-doped carbon shell were fabricated for use as anodes in sodium ion batteries. The ingeniously designed structure improved electron transfer, mitigated volume variation, and enhanced electrical conductivity, leading to excellent cycling stability and electrochemical performance.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Chemistry, Physical
Pengfei Huang et al.
Summary: A novel strategy for fabricating Ti3C2Tx MXene/transition metal sulfides (MSy) heterostructures via Lewis acidic molten salts etching and sulfurization treatment is presented, leading to remarkably improved electronic conductivity, Na+ migration kinetics, and outstanding electrochemical performance. The Ti3C2Tx/FeS2 heterostructure demonstrates excellent rate performance and long-term cyclic stability when used as SIB anodes, showcasing the potential of MXene-based heterostructures in energy storage applications.
ADVANCED ENERGY MATERIALS
(2022)
Article
Multidisciplinary Sciences
Ying Wang et al.
Summary: The rational introduction of PO43 into SnS layers using phytic acid as the phosphorus source is proposed as a strategy to enhance the electrochemical performance of SnS. The presence of Sn-O-P covalent bonds from PO43 acts as a conductive pillar to mitigate volume expansion and increase interlayer spacing, leading to improved energy storage capabilities.
Article
Engineering, Environmental
Hongyi Chen et al.
Summary: Multi-core Mn-doped FeS/NC was synthesized as a reliable electrode material for sodium ion batteries. Doping Mn-atoms increased lattice spacing and conductivity, improving charge transport and cyclic stability. The multi-core structure and attached carbon enhanced tolerance of volume expansion. This strategy shows promise in improving the electrochemical performance of monometallic sulfides.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Electrochemistry
Fengyue Zhao et al.
Summary: The Fe7S8 nanocomposite derived from MIL-101Fe exhibited excellent degradation ability for rhodamine B, outperforming Fe3O4 due to accelerated Fe3+/Fe2+ cycling by iron and sulfur species. The generation of SO4·(-) from the reaction between S2(2-) and dissolved O2 further facilitated the degradation process.
ELECTROCHIMICA ACTA
(2022)
Article
Chemistry, Physical
Bo Yan et al.
Summary: Hierarchical double-shelled nanoboxes with nitrogen-doped carbon outer shell supported on nanosheet-constructed Cu2MoS4 inner shell (Cu2MoS4@NC) were synthesized using a multistep template-engaged strategy. The Cu2MoS4@NC exhibited excellent electrochemical properties, reversible capacity, rate capability, and cycling stability. The research findings are expected to boost the development and application of metal sulfide-based anodes in sodium-ion batteries and beyond.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Materials Science, Multidisciplinary
Jie Liu et al.
Summary: Hybrid architectures integrating Fe7S8@NC@MoS2 with a three-dimensional heterostructure are designed in this study. The adjustable voids of the material can buffer the volume change during intercalation of metal ions. Additionally, the presence of MoS2 enhances electronic conductivity and metal ion transfer, resulting in improved battery performance.
ACS MATERIALS LETTERS
(2022)
Review
Chemistry, Multidisciplinary
Jianfeng Mao et al.
Summary: This article reviews the advances and advantages of automotive LIB recycling, as well as the evaluation of new cycling-oriented designs. The research shows that practical battery recycling can address environmental pollution and resource waste, while promoting sustainability.
ENERGY & ENVIRONMENTAL SCIENCE
(2022)
Article
Chemistry, Inorganic & Nuclear
Shijia Li et al.
Summary: This paper reports a simple and universal method for the synthesis of multicomponent nanocomposites using carbon dots with high affinity for metal ions and strong reduction activity. The resulting nanocomposite FeNS@PC exhibits superior catalytic performance and porous structure, making it suitable for pollutant degradation.
INORGANIC CHEMISTRY FRONTIERS
(2022)
Article
Electrochemistry
Yaqian Dong et al.
Summary: A one-dimensional Fe7S8@N-C nanocomposite was synthesized and showed excellent rate performance and cycling stability as an anode material for sodium-ion batteries, attributed to the synergistic effects of one-dimensional N-doped carbon and ultra-small Fe7S8 particles.
BATTERIES & SUPERCAPS
(2022)
Article
Chemistry, Multidisciplinary
Sailin Liu et al.
Summary: This study presents a nonflammable, moderate-concentration electrolyte highly compatible with graphite anodes that exhibits exceptional cycling stability. The stability of the electrolyte is attributed to the nearly 100% solvation of TMP molecules with K+ cations and the formation of a F-rich solid electrolyte interphase. The findings highlight the importance of electrolyte-interface compatibility and offer new opportunities for designing safe and practical PIBs.
ADVANCED MATERIALS
(2021)
Article
Engineering, Environmental
Yang Huang et al.
Summary: In this study, a core-shell fibrous nanocomposite was developed using cellulose-assisted ferric deposition and in-situ wrapping, which can dissipate electromagnetic waves through multiple-interfacial polarization and sulfur dipolar polarization. Additionally, the nano-sized Fe7S8 particles exposed extensive magnetic domains for magnetic resonance to further consume electromagnetic energy. The resulting composites exhibited low reflection loss and broad effective absorption frequency range.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Multidisciplinary
Kun Han et al.
Summary: A novel hierarchical architecture, Fe7S8@CNT@3DFG, has been designed for potassium storage, effectively buffering volume variations and improving the ionic/electronic transportation. The electrode shows exceptional rate capability and long-term cyclic stability, while in-situ XRD and ex-situ XPS/HRTEM results elucidate the reversible potassium-storage mechanism of Fe7S8. Additionally, a potassium full-cell employing Fe7S8@CNT@3DFG anode and potassium Prussian blue cathode demonstrates promising energy density for potential applications.
Article
Chemistry, Applied
Chengzhi Zhang et al.
Summary: Nanostructured iron sulfides show potential as anode materials for sodium-ion batteries due to their natural abundance and high theoretical capacity. Improving cycling stability and rate performance through adjusting Fe/S atomic ratio has been rarely explored. Fe7S8 encapsulated in N-doped hollow carbon fibers exhibits superior capacity and rate capability compared to FeS2, showcasing enhanced intrinsic electronic conductivity and faster Na diffusion coefficient.
JOURNAL OF ENERGY CHEMISTRY
(2021)
Article
Materials Science, Multidisciplinary
Wenpei Kang et al.
Summary: Anion-doping and carbon modification have been shown to enhance the electrochemical activity of transition metal chalcogenide anodes for sodium ion batteries. By using polydopamine coated metal organic framework of MIL-88-Fe as self-template, N-doped Fe7S8 embedded in N-doped carbon are successfully fabricated, resulting in a stable peapod-liked nanoarchitecture with fast and stable anode material performance for SIBs. This nanoarchitecture exhibits highly stable capacities even at ultrahigh current, showing impressive capacity retention due to ultrafast pseudocapacitive contribution and higher adsorption energy induced by anion-doping.
MATERIALS CHEMISTRY AND PHYSICS
(2021)
Article
Electrochemistry
Lijie Yang et al.
Summary: The development of high-performance electrode materials for sodium-ion batteries remains a challenge due to volume changes in anode materials. Utilizing different redox potentials of metals and preparing composite materials can enhance battery performance, energy storage efficiency, and cycle stability.
ELECTROCHIMICA ACTA
(2021)
Article
Chemistry, Physical
Zhuo Li et al.
Summary: A novel spindly nanorod Fe7S8@C-S nanocomposite with sulfur-doped and carbon-coated has been synthesized by in-situ sulfidation of Fe-based metal organic framework (Fe-MOF). The hierarchical structure derived from MOF enables the Fe7S8@C-S to exhibit outstanding lithium-storage performance and structural stability. As an LIB anode, the Fe7S8@C-S shows high reversible specific capacity, excellent rate capacity, and long-life cycling stability.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Article
Chemistry, Multidisciplinary
Yifan Xu et al.
Summary: In this research, a simple template-based two-step annealing strategy was proposed to enhance the application of metal sulfide CoS2 in carbon nanocubes as an advanced anode material for potassium-ion batteries. The study revealed the K+ storage mechanism in CoS2/CNCs and highlighted the unique structures of CoS2/CNCs that contribute to high specific capacity, good cycling stability, and excellent rate capability. The nanocomposite showed superior potassium storage properties when coupled with a KVPO4F cathode in K-ion full cells.
SCIENCE CHINA-CHEMISTRY
(2021)
Article
Chemistry, Multidisciplinary
Yu Wang et al.
Summary: Fe7S8/N-CNFs, as an anode for SIBs, demonstrate excellent electrochemical properties with a high reversible capacity and superior cycling stability. The superior performance can be attributed to the presence of Fe7S8 nanoparticles, which shorten Na+ diffusion distance, and the unique 3D N-CNFs, which enhance conductivity and provide active sites for Na+ adsorption and paths for electrolyte diffusion. The design of Fe7S8/N-CNFs sheds light on developing high-performance SIBs anode materials.
Article
Chemistry, Physical
Zhujun Yao et al.
Summary: Iron titanium oxides show promise as anodes for lithium-ion batteries, with high-capacity Fe2.75Ti0.25O4 combined with stable FeTiO3 to create mesoporous heterostructures. These structures address issues of low electronic conductivity and agglomeration, providing a high capacity and long cycle life in Fe-Ti-O electrodes, with good electrochemical properties demonstrated in solid-state batteries and full batteries. Ex situ X-ray diffraction and X-ray photoelectron spectroscopy are used to study the reaction mechanism of Fe-Ti-O during charge/discharge processes.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Chemistry, Physical
Jingyi Zhang et al.
Summary: This study designed and constructed a honeycomb-like hybrid architecture Cu-SnS2@NC to address the issues of SnS2 as a candidate for SIBs, effectively promoting ion/electron transfer ability and improving structural stability.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Lei Zhang et al.
Summary: Transition metal selenides have been explored for energy storage applications due to their large theoretical capacity and relatively high electronic conductivity, although their use in sodium-ion batteries has been limited by quick capacity decline and unconnected conducting networks. A novel FeSe2/CoSe2-CN electrode with improved electrochemical kinetics and stress adjustment is developed, exhibiting a high Na+ storage capacity and potentially high energy density properties when combined with Na3V2(PO4)(2)O2F. This research provides insights for the exploration of high-energy density energy-related components.
Article
Chemistry, Multidisciplinary
Linlin Ma et al.
Summary: Metal oxides/sulfides have been explored as promising anode candidates for next-generation lithium-ion batteries, but their practical applications have been limited by volume changes and poor conductivities. In this study, twin-born Fe3O4/FeS/carbon nanosheets were precisely fabricated and exhibited excellent electrochemical performance as an anode material for LIBs, with high specific capacity, cycling stability, and rate performance. This work deepens the understanding of precise synthesis of heterostructured materials for electrochemical energy storage.
MATERIALS CHEMISTRY FRONTIERS
(2021)
Article
Chemistry, Physical
Wangsuo Weng et al.
JOURNAL OF ALLOYS AND COMPOUNDS
(2020)
Article
Chemistry, Multidisciplinary
Shanshan Shi et al.
ADVANCED FUNCTIONAL MATERIALS
(2020)
Review
Engineering, Environmental
Shihan Qi et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Chemistry, Physical
Xiu Li et al.
JOURNAL OF POWER SOURCES
(2020)
Article
Chemistry, Physical
Yanli Zhou et al.
Article
Chemistry, Multidisciplinary
Deng Xianchun et al.
Article
Nanoscience & Nanotechnology
Qihang Chen et al.
ACS APPLIED MATERIALS & INTERFACES
(2020)
Article
Chemistry, Multidisciplinary
Zhiming Zheng et al.
Article
Chemistry, Multidisciplinary
Feng Jiang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2020)
Article
Chemistry, Multidisciplinary
Dongwei Cao et al.
Article
Chemistry, Physical
Huihua Li et al.
Article
Nanoscience & Nanotechnology
Qiming Tang et al.
ACS APPLIED MATERIALS & INTERFACES
(2020)
Article
Chemistry, Multidisciplinary
Wenda Li et al.
Review
Chemistry, Physical
Yang Sun et al.
ADVANCED ENERGY MATERIALS
(2019)
Article
Nanoscience & Nanotechnology
Yuliang Cao et al.
NATURE NANOTECHNOLOGY
(2019)
Article
Chemistry, Physical
Munzir H. Suliman et al.
Article
Chemistry, Physical
Shaozhuan Huang et al.
ADVANCED ENERGY MATERIALS
(2019)
Article
Chemistry, Physical
Xiaolei Wu et al.
APPLIED SURFACE SCIENCE
(2019)
Article
Chemistry, Multidisciplinary
Weihua Chen et al.
ADVANCED MATERIALS
(2019)
Article
Chemistry, Physical
Aihua Jin et al.
Article
Chemistry, Multidisciplinary
Min-Jae Choi et al.
Article
Nanoscience & Nanotechnology
Xuqing Zhang et al.
ACS APPLIED MATERIALS & INTERFACES
(2018)
Article
Nanoscience & Nanotechnology
Yaqiong Long et al.
ACS APPLIED MATERIALS & INTERFACES
(2018)
Article
Chemistry, Multidisciplinary
Yuan Ma et al.
Article
Chemistry, Physical
Zhiming Liu et al.
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
(2018)
Article
Chemistry, Multidisciplinary
Peixun Xiong et al.
Article
Nanoscience & Nanotechnology
Qiming He et al.
ACS APPLIED MATERIALS & INTERFACES
(2018)
Review
Electrochemistry
Qing Zhang et al.
ELECTROCHEMICAL ENERGY REVIEWS
(2018)
