4.8 Article

Excellent Dielectric Properties and Finite Element Simulation of Al-Epoxy Composites with Constructed Ultrathin Al2O3 Parallel-Plate Microcapacitors

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Obtaining Greatly Improved Dielectric Constant in BaTiO3-Epoxy Composites with Low Ceramic Volume Fraction by Enhancing the Connectivity of Ceramic Phase

Meng Cao et al.

Summary: This study demonstrates a strategy to overcome the challenge of obtaining a high dielectric constant in ceramic-polymer composites with low ceramic volume fraction. By using a high sintering temperature and introducing a porogen, the researchers were able to obtain BaTiO3 ceramics with high porosity and great connectivity. The composites prepared with these ceramics showed improved dielectric constants at low ceramic volume fractions. The composite with a sintering temperature of 1300 degrees C and a ceramic volume fraction of 38.1% exhibited a dielectric constant of 466.8, which was about nine times higher compared to the counterpart with a higher ceramic volume fraction of 60.8%. The composite also exhibited low dielectric loss and good frequency and temperature stability, indicating its potential for practical applications. Finite element simulation showed that the enhanced connectivity of BaTiO3 played a key role in the dielectric response of the composite.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Nanoscience & Nanotechnology

Obtaining Greatly Improved Dielectric Constant in BaTiO3-Epoxy Composites with Low Ceramic Volume Fraction by Enhancing the Connectivity of Ceramic Phase

Meng Cao et al.

Summary: This study demonstrates a strategy to obtain high dielectric constant (εr) BaTiO3 ceramics with improved connectivity and high porosity, leading to the preparation of composites with enhanced εr at low ceramic volume fraction. These composites show low dielectric loss, good frequency and temperature stability, and great potential for practical applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Physical

Greatly enhanced permittivity in BaTiO3-epoxy dielectric composites with improved connectivity of ceramic phase

Meng Cao et al.

Summary: BaTiO3-epoxy dielectric composites prepared by partial sintering exhibit significantly enhanced permittivity and improved phase connectivity. Controlling the phase connectivity can achieve a good combination of temperature-stable high permittivity, low dielectric loss, and relatively low ceramic fraction.

JOURNAL OF MATERIOMICS (2021)

Article Chemistry, Multidisciplinary

Ultrahigh-Working-Frequency Embedded Supercapacitors with 1T Phase MoSe2 Nanosheets for System-in-Package Application

Zhi Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Engineering, Manufacturing

The role of epoxy matrix occlusions within BaTiO3 nanoparticles on the dielectric properties of functionalized BaTiO3/epoxy nanocomposites

Thi Tuyet Mai Phan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Article Nanoscience & Nanotechnology

Performance of Dielectric Nanocomposites: Matrix-Free, Hairy Nanoparticle Assemblies and Amorphous Polymer-Nanoparticle Blends

Christopher A. Grabowski et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Nanoscience & Nanotechnology

Relationship between BaTiO3 Nanowire Aspect Ratio and the Dielectric Permittivity of Nanocomposites

Haixiong Tang et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Review Chemistry, Multidisciplinary

Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage

Zhi-Min Dang et al.

ADVANCED MATERIALS (2013)

Article Physics, Applied

Polyimide/nanosized CaCu3Ti4O12 functional hybrid films with high dielectric permittivity

Yang Yang et al.

APPLIED PHYSICS LETTERS (2013)

Article Materials Science, Ceramics

Polyvinylidene fluoride-modified BaTiO3 composites with high dielectric constant and temperature stability

Qing Xiao et al.

CERAMICS INTERNATIONAL (2013)

Article Electrochemistry

Dielectric Properties of Thermal and Plasma-Assisted Atomic Layer Deposited Al2O3 Thin Films

K. B. Jinesh et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Review Physics, Applied

DEVELOPMENT OF POLYMER-BASED 0-3 COMPOSITES WITH HIGH DIELECTRIC CONSTANT

Lin Zhang et al.

JOURNAL OF ADVANCED DIELECTRICS (2011)

Review Materials Science, Ceramics

Polymer-Ceramic Composites of 0-3 Connectivity for Circuits in Electronics: A Review

Mailadil T. Sebastian et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2010)

Article Materials Science, Multidisciplinary

Fabrication of novel Ag nanowires/poly(vinylidene fluoride) nanocomposite film with high dielectric constant

Wei Zheng et al.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2010)

Article Physics, Applied

High dielectric permittivity silver/polyimide composite films with excellent thermal stability

Zhi-Min Dang et al.

APPLIED PHYSICS LETTERS (2008)

Article Engineering, Electrical & Electronic

Recent Advances in High-k Nanocomposite Materials for Embedded Capacitor Applications

Jiongxin Lu et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2008)

Article Physics, Applied

Electrical properties of polyethylene/aluminum nanocomposites

X. Y. Huang et al.

JOURNAL OF APPLIED PHYSICS (2007)

Article Engineering, Manufacturing

Characterization and properties of an organic-inorganic dielectric nanocomposite for embedded decoupling capacitor applications

Jianwen Xu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

Article Physics, Applied

Dielectric behavior of a metal-polymer composite with low percolation threshold

Yun-Jia Li et al.

APPLIED PHYSICS LETTERS (2006)

Article Engineering, Electrical & Electronic

Effect of the polymer matrices on the dielectric behavior of a percolative high-k polymer composite for embedded capacitor applications

Jianwen Xu et al.

JOURNAL OF ELECTRONIC MATERIALS (2006)

Article Engineering, Manufacturing

A novel aluminum-filled composite dielectric for embedded passive applications

JW Xu et al.

IEEE TRANSACTIONS ON ADVANCED PACKAGING (2006)

Article Materials Science, Multidisciplinary

Growth and properties of amorphous thin films of the Al2O3-Y2O3 system

DH Kuo et al.

THIN SOLID FILMS (2006)

Article Engineering, Manufacturing

Hopping conductivity in polymer matrix-metal particles composites

G. C. Psarras

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

Article Physics, Applied

Low-loss percolative dielectric composite

JW Xu et al.

APPLIED PHYSICS LETTERS (2005)

Article Chemistry, Multidisciplinary

High-dielectric-constant silver-epoxy composites as embedded dielectrics

L Qi et al.

ADVANCED MATERIALS (2005)

Article Materials Science, Multidisciplinary

Dielectric properties of three ceramic/epoxy composites

DH Kuo et al.

MATERIALS CHEMISTRY AND PHYSICS (2004)

Article Polymer Science

Dielectric properties of aluminum-epoxy composites

V Singh et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2003)

Article Chemistry, Multidisciplinary

Novel ferroelectric polymer composites with high dielectric constants

ZM Dang et al.

ADVANCED MATERIALS (2003)

Article Polymer Science

Dielectric properties and morphology of polymer composites filled with dispersed iron

H Zois et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2003)

Article Physics, Applied

High-dielectric-constant ceramic-powder polymer composites

Y Bai et al.

APPLIED PHYSICS LETTERS (2000)