☆ 4.8 Article

Design of Ti4+/Zr4+ as Dual-Supporting Sites in Na3V2(PO4)3 for the Advanced Aqueous Zinc-Ion Battery Cathode

ACS APPLIED MATERIALS & INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Na superionic conductor-type compounds as protective layers for dendrites-free aqueous Zn-ion batteries

Xiaomin Huang et al.

Summary: Aqueous rechargeable Zn-ion batteries (ARZIBs) have gained attention for their safety, high energy density, and environmental friendliness. However, dendrite formation and corrosive reactions on the Zn anode surface have posed challenges. In this study, Ga3+-doped NaV2(PO4)(3) with Na superionic conductor (NASICON) structure was used as an artificial layer to stabilize the Zn anode. The optimal NVP-Ga(0.5) layer effectively homogenized ion flux and promoted uniform deposition of zinc, inhibiting dendrite growth and parasitic reactions. The resulting batteries showed stable operation and high discharge capacity.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Localized Electron Density Redistribution in Fluorophosphate Cathode: Dangling Anion Regulation and Enhanced Na-Ion Diffusivity for Sodium-Ion Batteries

Jinjin Wang et al.

Summary: This study demonstrates a new strategy to prepare advanced cathode materials for superior SIBs by doping chlorine, which improves the redox behavior of the cathode, enhances Na+ diffusion rate, and reduces charge transfer resistance. The Cl-doped NVPO2-xClxF cathode exhibits high rate capacity and cycle stability, and shows outstanding rate property and cycling capability in full cell configuration.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

3D porous Fluorine-Doped NaTi2(PO4)3@C as High-Performance Sodium-Ion battery anode with broad temperature adaptability

Qiang Deng et al.

Summary: This study introduces a novel strategy of fluorine-doped NaTi2(PO4)(3)@C material with a three-dimensional porous structure to enhance the sodium storage capability of sodium-ion batteries (SIBs). Experimental results demonstrate that the material shows excellent performance at high rates and over cycles, attributed to improved electronic conductivity and sodium ion kinetics.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

TiO2 as Second Phase in Na3Zr2Si2PO12 to Suppress Dendrite Growth in Sodium Metal Solid-State Batteries

Zhonghui Gao et al.

Summary: This research presents a solid-state sodium-metal battery electrolyte, Na3Zr2Si2PO12 (NZSP), with TiO2 as an additive to solve the dendrite problem. The addition of TiO2 forms a two-phase composite NZSP(TiO2) with improved density, modulus, hardness, grain structure, and permittivity. The TiO2 phase suppresses dendrite growth and enhances the electrochemical performance of the material.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

In-situ structural evolution analysis of Zr-doped Na3V2(PO4)2F3 coated by N-doped carbon layer as high-performance cathode for sodium-ion batteries

Chuan Guo et al.

Summary: The Zr-doped NVPF coated by N-doped carbon layer materials show improved electronic conductivity and structural stability. The optimized electrode of NVPF-Zr-0.02/NC exhibits high reversible capacities, superior rate capability, and excellent cycling performance, indicating great potential as a high-performance cathode material for sodium ion batteries.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Mn-Rich Phosphate Cathodes for Na-Ion Batteries with Superior Rate Performance

Chunliu Xu et al.

Summary: In this study, a selective replacement of vanadium rather than manganese in the Na4VMn(PO4)(3) system was developed to enhance the anode performance and structural stability. Experimental results confirmed that the Al-substituted Na4V0.8Al0.2Mn(PO4)(3) anode exhibited favorable ion kinetics and structure stability.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Eutectic Electrolyte with Unique Solvation Structure for High-Performance Zinc-Ion Batteries

Lishan Geng et al.

Summary: This research develops a new eutectic electrolyte for zinc-ion batteries, which effectively addresses the issues of instability, dendrite growth, and narrow electrochemical window in these batteries. By optimizing the molar ratio of ethylene glycol and zinc chloride, complex cations are formed and an organic-inorganic hybrid solid electrolyte interphase film is generated, enabling highly reversible and stable zinc plating/stripping.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Physical

A dynamic polyanion framework with anion/cation co-doping for robust Na/Zn-ion batteries

Jiang-Yu Li et al.

Summary: Among various cathode materials for SIBs, Na3V2(PO4)(3) has limitations in capacity and rate performance due to its insulated and stiff features. This work successfully addresses these issues by implementing anion and cation substitutions, leading to improved capacity and rate performance.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Chemistry, Physical

Simultaneous Incorporation of V and Mn Element into Polyanionic NASICON for High Energy-Density and Long-Lifespan Zn-Ion Storage

Zeyi Wu et al.

Summary: In this study, a novel cathode material Na4VMn(PO4)3@Graphene for aqueous Zn-ion battery (AZIB) was developed, which exhibited high energy density and long lifespan. The compound utilized V and Mn elements to achieve a two-step electron transfer mechanism, resulting in improved capacity and working voltage.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Modulating Na vacancies of Na4FeV(PO4)3 via Zr-substitution: Toward a superior rate and ultrastable cathode for sodium-ion batteries

Xudong Ma et al.

Summary: This study focuses on a new cathode material for sodium-ion batteries, Na4-xFeV1-xZrx (PO4)3/C, which replaces V3+ in Na3V2(PO4)3 with Fe2+ and a small amount of Zr4+. The substituted materials show reduced cost, low toxicity, increased Na+ concentration, and improved performance in terms of discharge capacity, rate capability, and cyclic stability.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Engineering, Environmental

Self-assembled ZnO-carbon dots anode materials for high performance nickel-zinc alkaline batteries

Ji-Shi Wei et al.

Summary: The use of carbon dots to construct ZnO-CDs nanocomposites significantly improves the cycling stability and rate capability of Ni-Zn batteries, outperforming traditional ZnO-based anodes. This approach provides a promising strategy for enhancing the performance of alkaline batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Crystal Chemistry of NaSICONs: Ideal Framework, Distortion, and Connection to Properties

Maxim Avdeev

Summary: The study reveals that distortion in NaSICON-type oxides is primarily driven by the size mismatch between A cations and M-2(TO4)(3) framework, which can be utilized to optimize the geometry of the structure to control properties such as A-ionic conductivity or thermal expansion.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Towards high-performance cathodes: Design and energy storage mechanism of vanadium oxides-based materials for aqueous Zn-ion batteries

Ting-Feng Yi et al.

Summary: Vanadium oxides-based materials are considered promising cathode materials for AZIBs, with hydrated and co-preinserted cations showing enhanced electrochemical performance. Extensive research has been done on various efficient ways to improve the performance of these materials. The review provides insights into future developments and challenges in the field of vanadium oxides-based compounds for AZIBs.

COORDINATION CHEMISTRY REVIEWS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

High-Voltage Zinc-Ion Batteries: Design Strategies and Challenges

Jianping Yan et al.

Summary: This review discusses the design strategies and challenges of high-voltage rechargeable zinc-ion batteries (ZIBs), introduces recent advances in high-voltage cathode materials, and explores strategies to increase cathode operating voltage and factors influencing voltage in redox reactions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Defect engineering on V2O3 cathode for long-cycling aqueous zinc metal batteries

Kefu Zhu et al.

Summary: Defect engineering is being used to modify battery active materials for improved cycling stability of electrodes. This study quantified vanadium-defective clusters in the V2O3 lattice and found that the defects lead to favorable sites for reversible Zn-ion storage in aqueous Zn coin cell configuration, resulting in 81% capacity retention after 30,000 cycles at 5 A g(-1). The findings suggest that aqueous Zn metal batteries with vanadium-defective V2O3 cathodes could be a promising system for high-power electrochemical energy storage.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Observation of Structural Decomposition of Na3V2(PO4)3 and Na3V2(PO4)2F3 as Cathodes for Aqueous Zn-Ion Batteries

Wei Li et al.

Summary: Recent research has shown that NASICON-type compounds, typically considered ideal candidates for AZIBs due to their large ionic channels and fast kinetics, may not be suitable after all due to their structural instability. Two NASICON structures, Na3V2(PO4)(3) and Na3V2(PO4)(2)F-3, were found to undergo structural decomposition in 1 M Zn(CF3SO3)(2) electrolyte during repeated cycling, with Na3V2(PO4)(3) degrading into Zn3V2O8, V2OS, and VO2 and Na3V2(PO4)(2)F-3 decomposing into V2O5, VPO5, and Zn-3(OH)(2)V2O7 center dot 2H(2)O. The decomposition mechanisms are attributed not only to inherent instability during Zn+ ion (de)intercalation, but also to the coinsertion of H+ and solvation effect of H2O, accelerating the structural decomposition process.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Binary NaCl-NaF and NaCl-LiF Flux-Mediated Growth of Mixed-Valence (V3+/4+) NASICON-Type Na3V2(PO4)2F2.5O0.5 and Na2.4Li0.6V2(PO4)2F2.5O0.5 for Highly Reversible Na- and Li-Ion Storage

Thamodaran Partheeban et al.

Summary: The development of robust electrode materials that can work for both Li- and Na-ion batteries has attracted significant attention recently. This study successfully synthesized a new sodium vanadium oxy-fluorophosphate solid solution and partially Li-exchanged crystals using solid-state flux techniques, demonstrating the potential of the flux method for scalable synthesis of cathode materials for hybrid-ion batteries.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Importance of Crystallographic Sites on Sodium-Ion Extraction from NASICON-Structured Cathodes for Sodium-Ion Batteries

Qianchen Wang et al.

Summary: The study compares the extraction/insertion behavior of sodium ions in two isostructural compounds and finds that the voltage of the V5+/V4+ redox couple in partially substituted Na3V2(PO4)3 is lower due to excessive diffusion activation energy.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bifunctional Hydrated Gel Electrolyte for Long-Cycling Zn-Ion Battery with NASICON-Type Cathode

Xidong Lin et al.

Summary: A novel hydrated gel electrolyte (HGE) for aqueous Zn-ion batteries is proposed in this study, which effectively suppresses the formation of Zn dendrites and enhances battery performance. By a simple fabrication method, the HGE paired with specific cathode materials can achieve stable battery cycling performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

In Situ Lattice Tunnel Distortion of Vanadium Trioxide for Enhancing Zinc Ion Storage

Junwei Ding et al.

Summary: Research on aqueous zinc-ion batteries is in its early stages due to limited cathode material options, particularly those with tunnel structures. A novel in situ electrochemical lattice distortion of vanadium trioxide (V2O3) is demonstrated for ultrafast Zn2+ storage, showing high capacity, remarkable rate performance, and high energy and power densities. This unique reaction highlights the potential of tunnel-type cathodes for achieving ultrafast zinc ion storage.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Flexible 1D Batteries: Recent Progress and Prospects

Yun-Hai Zhu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Deep-Cycle Aqueous Zinc-Ion Battery Containing an Oxygen-Deficient Vanadium Oxide Cathode

Meng Liao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Uncovering the Potential of M1-Site-Activated NASICON Cathodes for Zn-Ion Batteries

Pu Hu et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Electrode Design for High-Performance Sodium-Ion Batteries: Coupling Nanorod-Assembled Na3V2(PO4)3@C Microspheres with a 3D Conductive Charge Transport Network

Zhiqiang Lv et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

NASICON Na3V2(PO4)3 Enables Quasi-Two-Stage Na+ and Zn2+ Intercalation for Multivalent Zinc Batteries

Jesse S. Ko et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Zn2+ Pre-Intercalation Stabilizes the Tunnel Structure of MnO2 Nanowires and Enables Zinc-Ion Hybrid Supercapacitor of Battery-Level Energy Density

Qiang Chen et al.

SMALL (2020)

Add to Collection

Review Multidisciplinary Sciences

Roadmap for advanced aqueous batteries: From design of materials to applications

Dongliang Chao et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Na3V2(PO4)2O1.6F1.4 Cathode of Zn-Ion Battery Enabled by a Water-in-Bisalt Electrolyte

Qiao Ni et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Impact of Mg2+and Al3+Substitutions on the Structural and Electrochemical Properties of NASICON-NaxVMn0.75M0.25(PO4)3(M = Mg and Al) Cathodes for Sodium-Ion Batteries

Subham Ghosh et al.

SMALL (2020)

Add to Collection

Article Chemistry, Physical

Aqueous Zn//Zn(CF3SO3)2//Na3V2(PO4)3 batteries with simultaneous Zn2+/Na+ intercalation/de-intercalation

Ping Hu et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Engineering 3D Well-Interconnected Na4MnV(PO4)3 Facilitates Ultrafast and Ultrastable Sodium Storage

Wei Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Do Zinc Dendrites Exist in Neutral Zinc Batteries: A Developed Electrohealing Strategy to In Situ Rescue In-Service Batteries

Qi Yang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Realizing Three-Electron Redox Reactions in NASICON-Structured Na3MnTi(PO4)3 for Sodium-Ion Batteries

Ting Zhu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Stable Aqueous Zinc-Ion Storage Using a Layered Calcium Vanadium Oxide Bronze Cathode

Chuan Xia et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Durable Na2V6O16•1.63H2O Nanowire Cathode for Aqueous Zinc-Ion Battery

Ping Hu et al.

NANO LETTERS (2018)

Add to Collection

Review Chemistry, Physical

Polyanionic Insertion Materials for Sodium-Ion Batteries

Prabeer Barpanda et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Superior High-Rate and Ultralong-Lifespan Na3V2(PO4)(3)@C Cathode by Enhancing the Conductivity Both in Bulk and on Surface

Lina Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Na3MnZr(PO4)3: A High-Voltage Cathode for Sodium Batteries

Hongcai Gao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Superior Na-ion storage achieved by Ti substitution in Na3V2(PO4)3

Yangyang Huang et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Rechargeable Aqueous Zinc-Ion Battery Based on Porous Framework Zinc Pyrovanadate Intercalation Cathode

Chuan Xia et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

A long-life aqueous Zn-ion battery based on Na3V2(PO4)(2)F-3 cathode

Wei Li et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Chemistry, Applied

Synthesis, structure, optical and magnetic properties of interlamellar decoration of magadiite using vanadium oxide species

Qiushi Wang et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2017)

Add to Collection

Article Multidisciplinary Sciences

Rechargeable aqueous zinc-manganese dioxide batteries with high energy and power densities

Ning Zhang et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Challenges and Perspectives for NASICON-Type Electrode Materials for Advanced Sodium-Ion Batteries

Shuangqiang Chen et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Towards polyvalent ion batteries: A zinc-ion battery based on NASICON structured Na3V2(PO4)3

Guolong Li et al.

NANO ENERGY (2016)

Add to Collection

Article Energy & Fuels

Reversible aqueous zinc/manganese oxide energy storage from conversion reactions

Huilin Pan et al.

NATURE ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Towards High-Voltage Aqueous Metal-Ion Batteries Beyond 1.5 V: The Zinc/Zinc Hexacyanoferrate System

Leyuan Zhang et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Atomic Structure and Kinetics of NASICON NaxV2(PO4)3 Cathode for Sodium-Ion Batteries

Zelang Jian et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Li2NaV2(PO4)3:: A 3.7 V lithium-insertion cathode with the rhombohedral NASICON structure

BL Cushing et al.

JOURNAL OF SOLID STATE CHEMISTRY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.