☆ 4.8 Article

Flexible Thermal Protection Polymeric Materials with Self-Sensing and Self-Adaptation Deformation Abilities

ACS APPLIED MATERIALS & INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Aerospace

Design, modeling, and control of morphing aircraft: A review

Lingling Chu et al.

Summary: This study conducts a comprehensive survey on morphing aircraft, including configuration design, dynamic modeling, and flight control methods. The findings can provide theoretical and technical references for designing future morphing aircraft.

CHINESE JOURNAL OF AERONAUTICS (2022)

Add to Collection

Article Polymer Science

Lightweight, flexible, and heat-insulated phenolic impregnated carbon ablator (PICA) with adjustable flexibility and high compressive resilience property

Xinchao Liu et al.

Summary: A novel lightweight, flexible, and heat-insulated PICA material has been successfully fabricated, with low density, low thermal conductivity, excellent folding endurance, and improved thermal insulation property at high temperatures. This material shows promise for use in the flexible thermal protection field of aerospace.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Polymer Science

Flame retardancy of silicone rubber foam containing modified hydrotalcite

Li Ma et al.

Summary: In this study, the flame retardant properties of silicone rubber foam (SRF) composites were improved by using modified hydrotalcites (LDHs) with different Ce/Al molar ratios. The addition of LDHs resulted in a significant reduction in heat release rate, smoke production rate, and total smoke production, as well as an increase in thermal stability of the SRF composite. These findings provide guidance for the development of environmentally friendly SRF.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Lightweight and Mechanically Robust EPDM Foams for High Thermal Insulation and Moderate Ablative Resistance Via Constructing Cellular Char Layer

Hongjian Qu et al.

Summary: EPDM foams reinforced with aramid fibers and carbon fibers showed enhanced thermal stability and ablative resistance, achieving a good balance between thermal stability and ablation rate. This hybrid-fiber-reinforced EPDM foam exhibits potential for applications in the aerospace industry due to its low weight, good thermal insulation, ablative resistance, and mechanical robustness.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

Add to Collection

Article Polymer Science

Understanding the Role of Carbon Fiber Skeletons in Silicone Rubber-Based Ablative Composites

Yuan Ji et al.

Summary: This study explores the effect of carbon fiber length on the microstructure and ablation properties of silicone rubber-based ablative composites. It was found that carbon fibers longer than 3 mm can form a complete and continuous skeleton in the ceramic layer, leading to a decrease in ablation rate and back-face temperature.

POLYMERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Irregular Microdome Structure-Based Sensitive Pressure Sensor Using Internal Popping of Microspheres

Young Jung et al.

Summary: This study presents a novel method for generating 3D and irregular microdome structures for flexible pressure sensors. The sensor shows high sensitivity, short response time, and excellent repeatability and reliability. Various applications such as detecting blood pulse and recognizing soft objects are demonstrated.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Polymer Science

Thermally expandable microspheres with high expansion ratios: Design of core and shell for largest size change

Jasmine C. Gomez et al.

Summary: This study systematically optimizes the preparation process of thermally expandable microspheres, and obtains thermally expandable microspheres with variable particle morphology through the optimization of the shell material, liquid blowing agent, and emulsion time.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Add to Collection

Article Polymer Science

Vinyl-functionalized polyborosiloxane for improving mechanical and flame-retardancy performances of silicone rubber foam composites

Weining Du et al.

Summary: In this study, vinyl-terminated polyborosiloxane (pBS) filler was synthesized and incorporated into silicone rubber foam (SRF) matrix to prepare composite materials with excellent dispersion and mechanical properties. The inserted pBS significantly improved the mechanical and flame-retardant properties of the composites, showing a uniform porous structure and balanced performance. Furthermore, the pBS could catalyze the formation of a protective layer under fire and suppress heat and smoke production.

POLYMER INTERNATIONAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Design of the Thermal Restructured Carbon-Inorganic Composite Aerogel for Efficient Thermal Protection of Aero-Engines

Yumei Lv et al.

Summary: This study designs a carbon-SiO2-Al2O3 composite aerogel with better adhesion property, thermal stability, and heat insulation ability through thermochemical restructuring. The compressive strain-stress test and microscopy observations confirm the structural stability and thermal stability of the composite aerogel, which exhibits superior heat insulation performance. Numerical simulations validate its thermal protection effect.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Electrical & Electronic

SMA-based soft actuators with electrically responsive and photoresponsive deformations applied in soft robots

Dong Niu et al.

Summary: This research proposes dual-stimulus responsive SMA/PDMS soft actuators that can achieve reversible bending processes through electrical current and light stimulation. By optimizing the current and PDMS parameters, the bending amplitude, response time, and deformation recovery of the actuators can be controlled. This type of actuator has the potential to be applied in bioinspired soft hands and expand the application areas of soft robots.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Add to Collection

Article Polymer Science

Improving the Heat and Ablation Resistance of Silicone Rubber Composites by Incorporating Hollow Microspheres

Jinfeng Tian et al.

Summary: In this study, the addition of hollow microspheres into silicone rubber (SR) was found to improve the ablation performance of the composites. Among the different types of hollow microspheres tested, the acrylonitrile-methyl methacrylate copolymer hollow microspheres (AMHMs) showed the most significant enhancement in ablation performance.

POLYMERS (2022)

Add to Collection

Article Materials Science, Composites

Robust and self-healing polydimethylsiloxane/carbon nanotube foams for electromagnetic interference shielding and thermal insulation

Zhaoxin Xie et al.

Summary: Polymer-based electromagnetic interference (EMI) shielding materials with excellent properties, such as low density, low thermal conductivity, good mechanical properties, self-healing capability, and high shielding performance, are of great importance for military and aviation applications. However, achieving these desired properties poses significant challenges in design and fabrication. In this study, researchers developed a novel approach to prepare elastomeric foams with a unique sea-island structure, incorporating a segregated carbon nanotube (CNT) network and porous structure in a polydimethylsiloxane (PDMS) matrix. The resulting foams showed adjustable density, low thermal conductivity, high electrical conductivity, excellent compressive and impact strength, and outstanding EMI shielding effectiveness. These findings suggest that the obtained foam has great potential for modern electronics and aerospace applications.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Chemical

Enhanced mechanical, thermal and adhesion properties of polysilsesquioxane spheres reinforced epoxy nanocomposite adhesives

V Anoop et al.

Summary: The study indicates that the mechanical properties of epoxy systems can be significantly improved by adding fillers, especially showing better adhesive strength when in contact with metal substrates.

JOURNAL OF ADHESION (2021)

Add to Collection

Article Polymer Science

Improving ablation properties of liquid silicone rubber composites by in situ construction of rich-porous char layer

Liwei Yan et al.

Summary: The addition of APP and APB to liquid silicone rubber improves thermal insulation and ablation resistance, with APP exhibiting higher hardness and lower linear ablation rate. The formation of a firm, continuous, rich-porous char layer enhances ablation and insulation properties.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Engineering, Manufacturing

Temperature and strain-induced tunable electromagnetic interference shielding in polydimethylsiloxane/multi-walled carbon nanotube composites with temperature-sensitive microspheres

Jie-Hua Cai et al.

Summary: Elastomer composites with temperature and strain-induced tunable EMI shielding effectiveness were successfully obtained by introducing temperature-sensitive microspheres (TSM) into PDMS/CNT mixture. The mechanism of temperature and strain-induced regulation on EMI shielding was investigated, showing that TSM particles could rearrange the CNT conductive network at specific temperature and strain levels. Temperature-induced regulation led to a decrease in EMI SE at 120°C, partially recovering at 150°C, while strain-induced regulation resulted in reduced EMI SE after 70% compression, partially recovering at 120°C.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Engineering, Chemical

A comparison of ablative resistance properties of liquid silicone rubber composites filled with different fibers

Hao Zhang et al.

Summary: Flexible ablative materials are crucial for thermal protection systems in hypersonic flight missions. This study utilized epoxy resin modified liquid silicone rubber as the elastomeric matrix and evaluated the ablation resistance and thermal insulation properties of different fibers. Inorganic fibers showed higher thermal stability and could form a molten silica film for enhanced thermal protection.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Thermo-expandable microspheres strengthened polydimethylsiloxane foam with unique softening behavior and high-efficient energy absorption

Jie-Hua Cai et al.

Summary: The TEHM/PDMS foams showed high compressive modulus and strength, unique softening behavior, and high energy absorption property, attributed to the step-by-step broken of TEHMs.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Morphology and microstructure of SiC/SiC composites ablated by oxyacetylene torch at 1800°C

Guoqiang Yu et al.

Summary: The ablation of SiC/SiC composites tested at 1800 degrees Celsius showed three different regions based on the distribution of silica ablation product. The silica liquid film played a key role in resisting the material's ablation, but was disrupted by airflow channels, reducing the material's resistance. Nano-sized silica structures were found to grow on the surface of the SiC matrix in the marginal region.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Polymer Science

Mechanical and thermal degradation behavior of high-performance PDMS elastomer based on epoxy/silicone hybrid network

Yuan Wang et al.

Summary: In this study, a high-performance PDMS elastomer with excellent thermal and mechanical properties was successfully prepared. By constructing a hybrid material, the tensile strength, elongation at break, and shear strength of PDMS were significantly improved, making it suitable for applications in thermal protective coatings, high temperature resistant adhesives, and ablative material matrices.

POLYMER (2021)

Add to Collection

Article Polymer Science

Ablation properties of zinc borate and aluminum hypophosphite filled silicone rubber composites

Hao Zhang et al.

Summary: The ablative properties of epoxy modified silicone rubber composites filled with zinc borate (ZB) and aluminum hypophosphite (AHP) were improved by forming a dense char layer. The optimal ablative performance is achieved when the concentration of ZB and AHP is 10 and 5 phr, respectively. The structure and composition of the char layer were analyzed using various techniques.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Polymer Science

Synergistic improvement of mechanical and thermal properties in epoxy composites via polyimide microspheres

Xiaoqing Xu et al.

Summary: The incorporation of polyimide microspheres into epoxy resin matrix can enhance both the mechanical properties and toughness of the composite material, while also improving thermal stability. This method may provide a new way to enhance the properties of epoxy-based composites and offer insights for designing high-performance thermosetting composites.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ablation Response Behavior under Different Heat Flux Environments for Liquid Silicone Rubber Composites

Liwei Yan et al.

Summary: Liquid silicone rubber-based composites were used to investigate the response behavior of ablative materials under different hyperthermal environments. Computational fluid dynamics simulation showed that oxyacetylene flames have similar temperature distributions with different heat fluxes, but gas flow scouring force increases significantly with increasing heat flux. The ablation performance decreases with higher heat flux, mainly due to the hybrid coupling between mechanical denudation and oxidative erosion.

ACS APPLIED POLYMER MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Lightweight and self-healing carbon nanotube/acrylic copolymer foams: Toward the simultaneous enhancement of electromagnetic interference shielding and thermal insulation

Yanhu Zhan et al.

Summary: A carbon nanotube/acrylic copolymer foam prepared using isobutane as a blowing agent exhibits excellent EMI shielding effectiveness, low thermal conductivity, and self-healing properties. With a unique 3D porous structure, this foam shows great potential for applications in aviation due to its light weight and thermal insulation properties.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Advanced Materials for High-Temperature Thermal Transport

Sunmi Shin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Study of flame-retarded silicone rubber with ceramifiable property

Zhixi Li et al.

FIRE AND MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Highly Sensitive Conformal Pressure Sensing Coatings Based on Thermally Expandable Microspheres

Tianyu Shao et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Add to Collection

Article Engineering, Environmental

Temperature-responsive resistance sensitivity controlled by L-ascorbic acid and silane co-functionalization in flame-retardant GO network for efficient fire early-warning response

Zhao-Hui Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Manufacturing

Simultaneous improvements in fire resistance and alarm response of GO paper via one-step 3-mercaptopropyltrimethoxysilane functionalization for efficient fire safety and prevention

Neng-Jian Huang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Microtentacle Actuators Based on Shape Memory Alloy Smart Soft Composite

Hyun-Taek Lee et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Multifunctional polydimethylsiloxane foam with multi-walled carbon nanotube and thermo-expandable microsphere for temperature sensing, microwave shielding and piezoresistive sensor

Jie-Hua Cai et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Multidisciplinary

Water-based hybrid coatings toward mechanically flexible, super-hydrophobic and flame-retardant polyurethane foam nanocomposites with high-efficiency and reliable fire alarm response

Kun-Yu Guo et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Self-reinforced triple-shape memory silicone rubber composites with precise designable second temporary shapes by one step fixation

Bin Huang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation, characterization and foaming performance of thermally expandable microspheres

Furong Li et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Room-Temperature Self-Healing Ablative Composites via Dynamic Covalent Bonds for High-Performance Applications

Yuanbo Cai et al.

ACS APPLIED POLYMER MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

From two-dimensional to three-dimensional structures: A superior thermal-driven actuator with switchable deformation behavior

Jianan Song et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Thermal Decomposition and Ceramifying Process of Ceramifiable Silicone Rubber Composite with Hydrated Zinc Borate

Jiuqiang Song et al.

MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

A multifunctional shape-morphing elastomer with liquid metal inclusions

Michael J. Ford et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Hollow-Structured Materials for Thermal Insulation

Feng Hu et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

A temperature-induced conductive coating via layer-by-layer assembly of functionalized graphene oxide and carbon nanotubes for a flexible, adjustable response time flame sensor

Wenhua Chen et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Mechanics

Boron based fillers as char enhancers of EPDM based heat shielding materials for SRMs: A comparative analysis

Marco Rallini et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Prediction of the tensile strength of hybrid polymer composites filled with spherical particles and short fibers

Hong-Liang Dai et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Chemistry, Physical

Mechanical, thermal and fire performance of an inorganic-organic insulation material composed of hollow glass microspheres and phenolic resin

Hongyu Yang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Add to Collection

Article Polymer Science

Morphological Structure, Rheological Behavior, Mechanical Properties and Sound Insulation Performance of Thermoplastic Rubber Composites Reinforced by Different Inorganic Fillers

Yanpei Fei et al.

POLYMERS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices: A review

Maurizio Natali et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Improved Ablation Resistance of Silicone Rubber Composites by Introducing Montmorillonite and Silicon Carbide Whisker

Guangwu Zhang et al.

MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Gradient Porous Elastic Hydrogels with Shape-Memory Property and Anisotropic Responses for Programmable Locomotion

Rongcong Luo et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Polymer Science

Ablation properties of aluminum silicate ceramic fibers and calcium carbonate filled silicone rubber composites

Cheng Zhou et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

Add to Collection

Article Engineering, Multidisciplinary

Estimation of thermal conductivity for polypropylene/hollow glass bead composites

Ji-Zhao Liang

COMPOSITES PART B-ENGINEERING (2014)

Add to Collection

Article Materials Science, Ceramics

Ceramization and oxidation behaviors of silicone rubber ablative composite under oxyacetylene flame

Dong Yang et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Stimuli-responsive transformation in carbon nanotube/expanding microsphere-polymer composites

James Loomis et al.

NANOTECHNOLOGY (2013)

Add to Collection

Article Polymer Science

Influence of Crosslinking on the Characteristics of Thermally Expandable Microspheres Expanding at High Temperature

Magnus Jonsson et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2010)

Add to Collection

Article Engineering, Chemical

Thermally Expandable Microcapsules for Polymer Foaming-Relationship Between Expandability and Viscoelasticity

Yasuhiro Kawaguchi et al.

POLYMER ENGINEERING AND SCIENCE (2010)

Add to Collection

Article Polymer Science

Morphology, tensile properties, and fracture toughness of epoxy/Al2O3 nanocomposites

W Naous et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2006)

Add to Collection

Article Polymer Science

Reactive microspheres as active fillers for epoxy resins

C Carfagna et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.