☆ 4.7 Article

Toward Wearable Sensors: Advances, Trends, and Challenges

ACM COMPUTING SURVEYS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Spatiotemporal Measurement of Arterial Pulse Waves Enabled by Wearable Active-Matrix Pressure Sensor Arrays

Sanghoon Baek et al.

Summary: The study introduces wearable active-matrix pressure sensors for spatiotemporal measurements of arterial pulse waves, achieving optimal pulse waveforms on the wrist. The sensor array creates a pulse wave map displaying positional dependence of pulse amplitudes, allowing accurate extraction of the augmentation index and overcoming conventional single-point sensors' positioning issues.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Smart Face Mask Based on an Ultrathin Pressure Sensor for Wireless Monitoring of Breath Conditions

Junwen Zhong et al.

Summary: Researchers have developed a smart face mask that integrates an ultra-thin self-powered pressure sensor and a compact readout circuit for monitoring breath information wirelessly. This lightweight and portable mask shows great potential for various applications.

ADVANCED MATERIALS (2022)

Add to Collection

Article Neurosciences

Assessment of postural sway with a pendant-mounted wearable sensor

Shubo Lyu et al.

Summary: This study aimed to explore whether placing an IMU sensor in a pendant worn around the neck could discriminate between conditions with varying postural stability. The results showed that both the belt-mounted and pendant IMU sensors were effective in discriminating between different balance conditions. Therefore, placing an IMU in a pendant may be a feasible approach for studying and monitoring postural instability.

GAIT & POSTURE (2022)

Add to Collection

Article Chemistry, Analytical

Recent advancements in sampling, power management strategies and development in applications for non-invasive wearable electrochemical sensors

Naveen Tiwari et al.

Summary: Wearable electrochemical sensors are a rapidly developing technology in digital health, with the ability to non-invasively detect chemical analytes. These sensors have excellent performance and low cost, making them ideal for continuous monitoring of real-time health status. This review article discusses the advancements in wearable biosensors, focusing on their electrochemical analysis capabilities. It also explores the challenges and opportunities in this field.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Optics

Evaluation of eye response using a wearable display with automatic interpupillary distance adjustment

Hyoung Lee et al.

Summary: In this study, a wearable display with automatic control of interpupillary distance (IPD) is introduced. A test-bed module is designed based on the proposed design to evaluate the adjustment accuracy and viewing effect. The distance between the user's eyes can be measured and adjusted using IR camera sensors and a micro-actuator module. Image processing of IR camera sensor images allows for accurate determination of each pupil's position. Based on the measured information, a micro-actuator module can automatically adjust the binocular distance to fit each viewer's IPD. The system demonstrated high accuracy in automatic IPD adjustment and improved displayed image quality and 3D immersive experience.

OPTICS EXPRESS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Soft, Wearable Robotics and Haptics: Technologies, Trends, and Emerging Applications

Mengjia Zhu et al.

Summary: Recent advances in wearable soft robotics have the potential to revolutionize various fields such as haptic interfaces, assistive robotics, and biomedical devices. These soft robotic systems are designed to accommodate complex human morphology and movements, ensuring safe operation and providing context-appropriate haptic feedback or assistance to wearers.

PROCEEDINGS OF THE IEEE (2022)

Add to Collection

Article Chemistry, Analytical

The Validity of Wireless Earbud-Type Wearable Sensors for Head Angle Estimation and the Relationships of Head with Trunk, Pelvis, Hip, and Knee during Workouts

Ae-Ryeong Kim et al.

Summary: The present study investigated the validity of a wireless earbud-type inertial measurement unit (Ear-IMU) sensor for estimating head angle during four workouts, and examined the relationship between head angle obtained from the Ear-IMU sensor and the angles of other joints measured with a 3D motion analysis system. The results showed that the Ear-IMU sensor had strong or moderate validity in the sagittal and frontal planes. Additionally, there was a fair correlation between trunk angle in the frontal plane and head angle determined using the Ear-IMU sensor during certain exercises.

SENSORS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable socks with single electrode triboelectric textile sensors for monitoring footsteps

Gaffar Hossain et al.

Summary: This paper presents a self-powered smart textile shoe sensor that can detect footsteps using a simple manufacturing technique. The sensor is stable, effective, and reliable in sensing pressure and monitoring motion.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Add to Collection

Article Chemistry, Analytical

Wearable fluorescent contact lenses for monitoring glucose via a smartphone

Mengyu Deng et al.

Summary: This study developed smart and transparent contact lenses for real-time, continuous, non-invasive monitoring of glucose levels in tears, which is essential for diabetic patients' health. The smart contact lenses detect glucose using a fluorescent probe and reference dye, with the fluorescence images collected by a smartphone and transformed into RGB signals for glucose quantification. Animal experiments confirmed the biosafety of the lenses and the potential for painless glucose monitoring.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances in Multiresponsive Flexible Sensors towards E-skin: A Delicate Design for Versatile Sensing

Wu-Di Li et al.

Summary: Multiresponsive flexible sensors, which can serve as electronic skin, show great application potential in flexible electronics, AI, and IoT. These sensors with multiple sensing abilities are crucial for detecting human body motions, physiological signals, and environmental stimuli, contributing to real-time and comprehensive health monitoring and management.

SMALL (2022)

Add to Collection

Article Biochemical Research Methods

Respiratory and heart rate monitoring using an FBG 3D-printed wearable system

Catia Tavares et al.

Summary: This study proposes a 3D-printed sensor based on fiber Bragg grating (FBG) technology for monitoring respiratory rate (RR) and heart rate (HR). The selected sensor demonstrates high reproducibility and sensitivity to chest wall deformations caused by breathing and heartbeats, making it a valuable solution for easy fabrication.

BIOMEDICAL OPTICS EXPRESS (2022)

Add to Collection

Article Computer Science, Information Systems

Neckband-Based Continuous Blood Pressure Monitoring Device With Offset-Tolerant ROIC

Kwangmuk Lee et al.

Summary: This study introduces a wearable neckband device for continuous cuffless blood pressure monitoring using electrocardiogram and impedance plethysmogram. By optimizing the composition and position of the sensing electrodes, as well as selecting the core parameter of impedance plethysmogram, the accuracy of blood pressure estimation is improved. A customized integrated circuit is developed to achieve noise tolerance and wireless transmission for real-time blood pressure monitoring.

IEEE ACCESS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Omnidirectional Tactile Profiling Using a Deformable Pressure Sensor Array Based on Localized Piezoresistivity

Jaehyun Kim et al.

Summary: This research developed a simple piezoresistive sensor that can be wrapped around a finger, providing pressure distribution and spatial deformation of the substrate, achieving omnidirectional tactility. The sensor can be used for blind contact recognition of objects piled up in a box.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Evolvable Skin Electronics by In Situ and In Operando Adaptation

Kyun Kyu Kim et al.

Summary: Recent advancements in thin-film electronics have brought skin electronics to the forefront, with the integration of multiple skin sensors and wireless power transfer enabling higher-level applications in wearable healthcare and AR/VR devices. Skin sensors are influenced by target body parts and users, requiring various design adjustments for optimal performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Core-Sheath Sensing Yarn-Based Electrochemical Fabric System for Powerful Sweat Capture and Stable Sensing

Lie Wang et al.

Summary: A wearable fabric sensor has been developed to improve sweat capture efficiency and maintain stable circuit connectivity and sensing performance. This sensor can also monitor multiple chemical information in real-time under different exercise conditions.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Analytical

Intelligent Wearable Sensors Interconnected with Advanced Wound Dressing Bandages for Contactless Chronic Skin Monitoring: Artificial Intelligence for Predicting Tissue Regeneration

Surachate Kalasin et al.

Summary: This article introduces an AI-enabled wearable sensor technology that can monitor the healing process of wounds and provide efficient healthcare solutions by minimizing the risk of disease infection. The deep ANN algorithm achieves a 94.6% accuracy for contactless measurement using pH-responsive voltage output. The design of the bandage material allows for pH-responsive current during wound healing.

ANALYTICAL CHEMISTRY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Wire-Free and Fiber-Based Smart T-Shirt for Real-Time Breathing Rate Monitoring

Hajer Abed et al.

Summary: A new wearable smart T-Shirt design for monitoring breathing rate using Received Signal Strength Indicator (RSSI) is proposed. The design includes a wireless sensor for monitoring breathing rate, a wireless power transfer system, and a user interface for analyzing the collected data. The study presents breathing curves obtained from a breathing sensor incorporated in a smart T-shirt and applies data analysis methods to extract important parameters for medical diagnosis. Additional results are also presented for different tests on male and female subjects using another design of a smart T-shirt system consisting of an array of six sensors.

IEEE SENSORS JOURNAL (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Development and evaluation of a novel flex sensor-based glenohumeral subluxation degree assessment for wearable shoulder sling

Shuangyuan Huang et al.

Summary: A GHS assessment method based on a flex sensor was developed for stroke patients, and it showed strong correlation and good reliability compared to the gold-standard radiographic assessment.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Add to Collection

Article Chemistry, Analytical

Data Glove Using Soft and Stretchable Piezoresistive Sensors

Kean Aw et al.

Summary: This research investigates the design and implementation of elastomer-based piezoresistive strain sensors and applies them to a data glove to demonstrate their application. The primary objective is to integrate two sensing piezoresistive elements as one single-piece sensor that detects the bending angles of the finger joints. Experiments conducted have demonstrated that these soft, flexible, and stretchable piezoresistive sensors are repeatable and viable for data-glove and other wearable applications.

MICROMACHINES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Stretchable and Strain-Decoupled Fluorescent Optical Fiber Sensor for Body Temperature and Movement Monitoring

Meihua Chen et al.

Summary: A stretchable optical sensor with strain-decoupling ability is developed for wearable devices, allowing measurement of sensing variables while minimizing interference from body movements.

ACS PHOTONICS (2022)

Add to Collection

Article Energy & Fuels

Wearable Electronics Powered by Triboelectrification between Hair and Cloth for Monitoring Body Motions

Zhaosu Wang et al.

Summary: This study proposes a TENG-based wearable device using human hair, which generates stable output voltage through triboelectrification between hair and PDMS layer. A self-powered application for monitoring human motion state is also successfully demonstrated.

ENERGY TECHNOLOGY (2022)

Add to Collection

Article Multidisciplinary Sciences

A wearable, flexible sensor for real-time, home monitoring of sleep apnea

Satoko Honda et al.

Summary: This study develops a flexible humidity sensor that can be attached to a mask for wireless home-use respiration monitoring. The sensor has high sensitivity and stability, and can continuously track respiratory conditions during sleep, aiding in the identification of symptoms of sleep apnea.

ISCIENCE (2022)

Add to Collection

Review Chemistry, Analytical

The Current State of Optical Sensors in Medical Wearables

Erik Vavrinsky et al.

Summary: Optical sensors are increasingly important in medical diagnostic devices, offering excellent metrological properties, immunity to electromagnetic interference, and electrical safety. Their use enables better continuous diagnostics and the development of telemedicine.

BIOSENSORS-BASEL (2022)

Add to Collection

Article Chemistry, Analytical

A Wearable Breath Sensor Based on Fiber-Tip Microcantilever

Cong Zhao et al.

Summary: The proposed wearable breath sensor based on a fiber-tip microcantilever detects breath rate by monitoring power variations of reflected light, demonstrating high sensitivity and excellent thermal stability. It is capable of accurately detecting various breath patterns, making it a useful and reliable tool for respiration rate monitoring.

BIOSENSORS-BASEL (2022)

Add to Collection

Article Chemistry, Analytical

Interdigitated Organic Sensor in Multimodal Facemask's Barrier Integrity and Wearer's Respiration Monitoring

Marina Galliani et al.

Summary: This article proposes the fabrication of an organic sensor to monitor the integrity of surgical masks in order to ensure the health and safety of individuals during their use. The sensor does not affect the functionality and air permeability of the mask, and can track its barrier integrity through measuring humidity and respiration rate.

BIOSENSORS-BASEL (2022)

Add to Collection

Article Engineering, Multidisciplinary

A belt-like assistive device for visually impaired people: Toward a more collaborative approach

Erick Javier Arguello Prada et al.

Summary: The study aimed to develop a novel assistive system based on feedback from visually impaired individuals, achieving positive results in testing but needing further improvements.

COGENT ENGINEERING (2022)

Add to Collection

Review Engineering, Biomedical

Wearable sensing devices for upper limbs: A systematic review

Mingjie Dong et al.

Summary: Wearable sensing devices, as smart electronic devices that can be worn on the body, have attracted significant research interest in recent years. This paper provides an overview of upper-limb wearable device research, including key technologies and future trends, as well as an analysis of their advantages and disadvantages. Future research potential in developing better wearable sensing devices for upper limbs is highlighted.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dynamic Pore Modulation of Stretchable Electrospun Nanofiber Filter for Adaptive Machine Learned Respiratory Protection

Jaeho Shin et al.

Summary: The importance of personal respirators is heightened by the recent emergence of highly contagious respiratory diseases and global air pollution issues. However, the incongruence between dynamic environments and nonadaptive respirators can have adverse physiological and psychological effects, hindering their public dissemination. To address this, an adaptive respiratory protection approach driven by machine learning algorithms is introduced, enabling real-time predictive adapting maneuvers for continuously optimized respiratory protection.

ACS NANO (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Ring-Shaped Hand Motion Sensor Based on Triboelectricity

Zhihua Wang et al.

Summary: A self-powered finger ring hand motion sensor was proposed in this study, which monitored finger bending and stress through multiple sensing units. The sensor demonstrated promising charge transfer features and could be used for gesture recognition and simulating mouse functions.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Shoe-Integrated Sensor System for Long- Term Center of Pressure Evaluation

Rui Guo et al.

Summary: This study developed a smart-shoe form long-term CoP monitoring system, which achieved high-precision CoP measurements through the design of sensor positions in the insole, development of a smartphone app, and machine learning methods, suitable for both clinical and home environments.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Wearable ForeSeiz Headband for Forecasting Real-Time Epileptic Seizures

Banu Priya Prathaban et al.

Summary: The research aims to achieve real-time prediction of epileptic seizures before onset, and has designed a bio-inspired and self-cognizant seizure predictor called ForeSeiz, built on the IoMT framework. The predictor features an optimized ECNN classification model and PTP method, which after training and testing, has shown high accuracy and long-term prediction.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Highly Sensitive Wearable Flexible Pressure Sensor Based on Conductive Carbon Black/Sponge

Chao Ji et al.

Summary: The article introduces a method to improve the absorbability of sponge flexible pressure sensors using conductive carbon black as a filler. By soaking the sponge to prepare conductive carbon black/sponge flexible pressure sensors, the performance under different thicknesses is tested.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Sensitive Strain Sensors Based on Molecules-Gold Nanoparticles Networks for High-Resolution Human Pulse Analysis

Chang-Bo Huang et al.

Summary: A novel strain sensor based on gold nanoparticles and flexible molecular linkers has been developed, exhibiting high sensitivity, superior performance, and robustness, suitable for health monitoring and extraction of important physiological parameters.

SMALL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

High-Resolution and High-Sensitivity Flexible Capacitive Pressure Sensors Enhanced by a Transferable Electrode Array and a Micropillar-PVDF Film

Zebang Luo et al.

Summary: Flexible pressure sensors are being increasingly studied for mimicking human skin to sense external pressure. Achieving fully biomimetic skins requires sensors with high resolution and high sensitivity, and a micropillar-PVDF dielectric layer has been successfully designed to meet these requirements. The sensor matrix based on the micropillar-PVDF film and electrode array has shown high resolution and sensitivity in detecting pressure distribution and mapping objects with various geometries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

Multifunctional interlocked e-skin based on elastic micropattern array facilely prepared by hot-air-gun

Yajie Zhang et al.

Summary: An efficient method named hot-air-gun assisted preparation is proposed to fabricate electronic skin with quasi-hemispherical micropatterned array, enhancing its sensing performance significantly. This interlocked e-skin exhibits multifunction to discriminate pressure-temperature stimuli, monitor various human physiological signals, and wirelessly monitor respiratory rates. With facile preparation process and low-cost raw materials, this approach can be easily scaled up for practical production.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Cardiac & Cardiovascular Systems

Necklace-embedded electrocardiogram for the detection and diagnosis of atrial fibrillation

Onni E. Santala et al.

Summary: This study evaluated the feasibility and reliability of a novel Necklace-ECG device for screening, identifying, and diagnosing AF, showing high sensitivity and specificity in detecting AF as evaluated by cardiologists and an automated AF-detection algorithm. The Necklace-ECG device proves to be a promising method for AF screening.

CLINICAL CARDIOLOGY (2021)

Add to Collection

Article Chemistry, Analytical

Reliability and Validity of Running Cadence and Stance Time Derived from Instrumented Wireless Earbuds

Anouk Nijs et al.

Summary: Instrumented earbuds with accelerometers showed good test-retest reliability, face validity, and concurrent validity when measuring cadence and stance time in running. This indicates that they may be a promising alternative to currently used wearable systems.

SENSORS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Soft capacitive tactile sensor using displacement of air-water interface

Tatsuya Usui et al.

Summary: The proposed soft capacitive tactile sensor utilizes the displacement of an air-water interface to detect applied forces, eliminating the need for stiff electrical elements and improving flexibility and durability. The sensor can detect both press and pull forces and has a quick response to external forces, showing high repeatability and low hysteresis.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Add to Collection

Article Chemistry, Analytical

Development of a Wearable Mouth Guard Device for Monitoring Teeth Clenching during Exercise

Rio Kinjo et al.

Summary: A wearable Mouth Guard (MG) device with force sensors was developed to monitor teeth clenching during exercise. The device showed accurate output and sufficient temporal resolution, and its sensor outputs aligned with video-motion analysis results in a teeth-grinding test. Compared to EMG, the MG sensor was found to be easier to use in monitoring teeth clenching.

SENSORS (2021)

Add to Collection

Review Chemistry, Analytical

Non-invasive wearable chemical sensors in real-life applications

Nadtinan Promphet et al.

Summary: Non-invasive wearable chemical sensors have gained great attention in personal health monitoring and medical diagnosis over the past decade, providing real-time monitoring of biomarkers to help users manage health, predict diseases, and improve quality of life. (c) 2021 Elsevier B.V. All rights reserved.

ANALYTICA CHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Multidisciplinary

E-Skin Piezoresistive Pressure Sensor Combining Laser Engraving and Shrinking Polymeric Films for Health Monitoring Applications

Andreia dos Santos et al.

Summary: The pursuit of electronic-skin technology in the 21st century aims to mimic the sensory capabilities of human skin. Using laser engraving with shrinking polymeric films (SPFs) to fabricate molds for pressure sensors greatly improves performance while minimizing costs. Thorough investigation of laser engraving parameters optimized SPF molds to produce e-skin piezoresistive sensors with high sensitivity and capability for health monitoring applications.

ADVANCED MATERIALS INTERFACES (2021)

Add to Collection

Review Engineering, Biomedical

Energy Harvesting Untethered Soft Electronic Devices

Kyun Kyu Kim et al.

Summary: The report discusses recent progress in battery-less, wearable devices using a variety of energy harvesting sources, such as electromagnetic energy, mechanical energy, and biofuels. It also covers the principles and working mechanisms of near/far-field communications, triboelectric, thermoelectric, and biofuel technologies.

ADVANCED HEALTHCARE MATERIALS (2021)

Add to Collection

Article Environmental Sciences

Evaluation of a Wearable Non-Invasive Thermometer for Monitoring Ear Canal Temperature during Physically Demanding (Outdoor) Work

Charlotte Christina Roossien et al.

Summary: The study evaluated the accuracy of a wearable non-invasive thermometer and found high correlations with ear canal infrared thermometry in both laboratory and field settings. However, environmental conditions and personal protective clothing affected the accuracy of the thermometer.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2021)

Add to Collection

Article Chemistry, Analytical

Development of a Wearable Glove System with Multiple Sensors for Hand Kinematics Assessment

Fei Fei et al.

Summary: This study introduces a novel wearable glove system for hand function assessment, which uses sensors to capture hand movements and a complementary filter algorithm to calculate joint angles, while also developing a virtual hand model. Experimental results demonstrate that this smart glove system can accurately capture and reproduce human hand motions, potentially reducing the complexity and time consumption of hand kinematics assessment.

MICROMACHINES (2021)

Add to Collection

Article Multidisciplinary Sciences

Smart contact lens and transparent heat patch for remote monitoring and therapy of chronic ocular surface inflammation using mobiles

Jiuk Jang et al.

Summary: This study presents a soft, smart contact lens and a skin-attachable therapeutic device for wireless monitoring and treatment of chronic ocular surface inflammation. Both devices allow for instantaneous diagnosis of OSI and automated hyperthermia treatments, showing good biocompatibility and reliability as a noninvasive, mobile health care solution through in vivo tests on live animals and human subjects.

SCIENCE ADVANCES (2021)

Add to Collection

Article Biophysics

An intelligent face mask integrated with high density conductive nanowire array for directly exhaled coronavirus aerosols screening

Qiannan Xue et al.

Summary: An intelligent face mask embedded with high-density conductive nanowire arrays enables rapid and effective detection of coronavirus, achieving viral concentration detection as low as 7 pfu/mL in just 5 minutes. This point-of-care system can be used for on-site rapid screening of coronavirus infections and may aid in understanding the progression of COVID-19.

BIOSENSORS & BIOELECTRONICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable Band-Shaped Device and Detection Algorithm for Laryngeal Elevation in Mendelsohn Maneuver

Hiroyuki Nakamoto et al.

Summary: Aspiration pneumonia is a serious condition in the elderly, and training with the Mendelsohn maneuver can strengthen swallowing muscles. This study introduces a wearable device with stretchable strain sensors to detect laryngeal elevation times for biofeedback support. The system showed promising results in elderly participants, accurately detecting laryngeal elevation times.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Magnetic Resonance-Compatible Wearable Device Based on Functionalized Fiber Optic Sensor for Respiratory Monitoring

Daniela Lo Presti et al.

Summary: This study presents a wearable device based on FBG sensors for monitoring respiratory frequency from nasal airflow, achieving high performance in pilot study on 6 volunteers across different breathing stages.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Chemistry, Analytical

Respiration Monitoring via Forcecardiography Sensors

Emilio Andreozzi et al.

Summary: This study introduces a novel technique for respiration monitoring, forcecardiography (FCG), which shows higher sensitivity, precision, accuracy, and interbreath interval measurement compared to ECG-derived respiration (EDR) and electroresistive respiration band (ERB). The simultaneous recording of respiration signals and forcecardiograms using FCG sensors provides a promising approach for monitoring multiple vital signs and analyzing cardiorespiratory interactions, especially for patients with heart and pulmonary diseases.

SENSORS (2021)

Add to Collection

Review Chemistry, Analytical

Advanced Flexible Skin-Like Pressure and Strain Sensors for Human Health Monitoring

Xu Liu et al.

Summary: Recent research has shown that flexible pressure and strain sensors integrated with the human body have great potential in healthcare. Significant progress has been made in the design strategies, sensor structures, performance parameters, and applications of these sensors. Future research should focus on improving the flexibility and sensitivity of flexible sensors, as well as their biocompatibility, versatility, and durability.

MICROMACHINES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Integrated Multiplex Sensing Bandage for In Situ Monitoring of Early Infected Wounds

Ziqi Liu et al.

Summary: Infection is the most common complication of chronic wounds, and tracking wound markers for accurate diagnosis holds great potential. A multiplex sensing bandage system has been developed for real-time monitoring of various indicators, showing promising applications in wound management and other diseases.

ACS SENSORS (2021)

Add to Collection

Review Engineering, Electrical & Electronic

Recent Advances in Electrochemical Sensors for Wearable Sweat Monitoring: A Review

Kan Kan Yeung et al.

Summary: This review highlights the recent progress in the development and application of electrochemical sweat sensors and self-powered systems for wearable applications, including various types of sensors and novel functional nanomaterials. The advancement of battery-free wearable devices, such as self-powered biofuel cells and energy harvesting from novel materials, are also discussed, along with the challenges and opportunities in developing sweat sensor-based wearable systems for future directions.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Engineering, Multidisciplinary

Biomimetic-inspired micro-nano hierarchical structures for capacitive pressure sensor applications

Chandreswar Mahata et al.

MEASUREMENT (2020)

Add to Collection

Article Computer Science, Information Systems

Design and development of wireless wearable bio-tooth sensor for monitoring of tooth fracture and its bio metabolic components

Mohamed Hashem et al.

COMPUTER COMMUNICATIONS (2020)

Add to Collection

Article Biochemical Research Methods

Wearable respiration monitoring using an in-line few-mode fiber Mach-Zehnder interferometric sensor

Ruihang Wang et al.

BIOMEDICAL OPTICS EXPRESS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

3D Printed, Customizable, and Multifunctional Smart Electronic Eyeglasses for Wearable Healthcare Systems and Human-Machine Interfaces

Joong Hoon Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Smart Glove Integrated with Tunable MWNTs/PDMS Fibers Made of a One-Step Extrusion Method for Finger Dexterity, Gesture, and Temperature Recognition

Yingchun Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Degradable and highly sensitive CB-based pressure sensor with applications for speech recognition and human motion monitoring

Jiaojie Meng et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Stretchable and Sensitive Pressure Sensor Array Based on Icicle-Shaped Liquid Metal Film Electrodes

Yiqiu Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Biophysics

An instrument for measuring blood pressure and assessing cardiovascular health from the fingertip

Tuukka Panula et al.

BIOSENSORS & BIOELECTRONICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Real-Life Stress Level Monitoring Using Smart Bands in the Light of Contextual Information

Yekta Said Can et al.

IEEE SENSORS JOURNAL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Flexible Pressure Sensors for Biomedical Applications: From Ex Vivo to In Vivo

Lin Li et al.

ADVANCED MATERIALS INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Wearable and Deformable Graphene-Based Affinity Nanosensor for Monitoring of Cytokines in Biofluids

Ziran Wang et al.

NANOMATERIALS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Plant-Based Biodegradable Capacitive Tactile Pressure Sensor Using Flexible and Transparent Leaf Skeletons as Electrodes and Flower Petal as Dielectric Layer

Ahmed Elsayes et al.

ADVANCED SUSTAINABLE SYSTEMS (2020)

Add to Collection

Review Chemistry, Analytical

Wearable Skin Sensors and Their Challenges: A Review of Transdermal, Optical, and Mechanical Sensors

Ammar Ahmad Tarar et al.

BIOSENSORS-BASEL (2020)

Add to Collection

Article Multidisciplinary Sciences

Noninvasive wearable electroactive pharmaceutical monitoring for personalized therapeutics

Shuyu Lin et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Add to Collection

Review Chemistry, Analytical

Challenges in Design and Fabrication of Flexible/Stretchable Carbon- and Textile-Based Wearable Sensors for Health Monitoring: A Critical Review

Jae Sang Heo et al.

SENSORS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Smart T-Shirt Based on Wireless Communication Spiral Fiber Sensor Array for Real-Time Breath Monitoring: Validation of the Technology

Mourad Roudjane et al.

IEEE SENSORS JOURNAL (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Design, Development and Characterization of Textile Stitch-Based Piezoresistive Sensors for Wearable Monitoring

Nauman Ali Choudhry et al.

IEEE SENSORS JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Stretchable Fiber-Based Potentiometric Ion Sensors for Multichannel Real-Time Analysis of Human Sweat

Jianan Xu et al.

ACS SENSORS (2020)

Add to Collection

Article Multidisciplinary Sciences

Glove-based sensors for multimodal monitoring of natural sweat

Mallika Bariya et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable and Comfortable e-Textile Headband for Long-Term Acquisition of Forehead EEG Signals

Manuel Reis Carneiro et al.

IEEE SENSORS JOURNAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Scalable fabrication of flexible piezoresistive pressure sensors based on occluded microstructures for subtle pressure and force waveform detection

Wu-Di Li et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Analytical

A Sensor-Based Screening Tool for Identifying High Pelvic Mobility in Patients Due to Undergo Total Hip Arthroplasty

Xueyang Wang et al.

SENSORS (2020)

Add to Collection

Article Biophysics

Towards smart personalized perspiration analysis: An IoT-integrated cellulose-based microfluidic wearable patch for smartphone fluorimetric multi-sensing of sweat biomarkers

Sina Ardalan et al.

BIOSENSORS & BIOELECTRONICS (2020)

Add to Collection

Article Computer Science, Information Systems

Wearable Devices for Remote Physical Rehabilitation Using a Fabry-Perot Optical Fiber Sensor: Ankle Joint Kinematic

Maria de Fatima Domingues et al.

IEEE ACCESS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A highly sensitive, stable, scalable pressure sensor based on a facile baking-inspired foaming process for a human-computer interface

Guk-Jin Jeon et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

A new approach for an ultrasensitive tactile sensor covering an ultrawide pressure range based on the hierarchical pressure-peak effect

Congyi Wu et al.

NANOSCALE HORIZONS (2020)

Add to Collection

Article Computer Science, Information Systems

Single-Channel Impedance Plethysmography Neck Patch Device for Unobtrusive Wearable Cardiovascular Monitoring

Ting-Wei Wang et al.

IEEE ACCESS (2020)

Add to Collection

Article Computer Science, Information Systems

Chest Wearable Apparatus for Cuffless Continuous Blood Pressure Measurements Based on PPG and PCG Signals

Davide Marzorati et al.

IEEE ACCESS (2020)

Add to Collection

Review Biotechnology & Applied Microbiology

Wearable biosensors for healthcare monitoring

Jayoung Kim et al.

NATURE BIOTECHNOLOGY (2019)

Add to Collection

Article Optics

Soft optical fiber curvature sensor for finger joint angle proprioception

Hong Li et al.

OPTIK (2019)

Add to Collection

Article Engineering, Multidisciplinary

Multi-Objective Optimization Design through Machine Learning for Drop-on-Demand Bioprinting

Jia Shi et al.

ENGINEERING (2019)

Add to Collection

Article Chemistry, Analytical

Sock-Type Wearable Sensor for Estimating Lower Leg Muscle Activity Using Distal EMG Signals

Takashi Isezaki et al.

SENSORS (2019)

Add to Collection

Article Health Care Sciences & Services

Design and Implementation of a Novel System for Correcting Posture Through the Use of a Wearable Necklace Sensor

Hung-Yuan Chung et al.

JMIR MHEALTH AND UHEALTH (2019)

Add to Collection

Review Engineering, Electrical & Electronic

Sensing strategies in wearable bio-mechanical systems for medicine and sport: a review

Giorgio De Pasquale et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)

Add to Collection

Review Chemistry, Analytical

Systematic Analysis of a Military Wearable Device Based on a Multi-Level Fusion Framework: Research Directions

Han Shi et al.

SENSORS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Hierarchically Structured Vertical Gold Nanowire Array-Based Wearable Pressure Sensors for Wireless Health Monitoring

Bowen Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable System Based on Flexible FBG for Respiratory and Cardiac Monitoring

Daniela Lo Presti et al.

IEEE SENSORS JOURNAL (2019)

Add to Collection

Article Engineering, Electrical & Electronic

An FBG-Based Sensing Glove to Measure Dynamic Finger Flexure With an Angular Resolution of 0.1° up to Speeds of 80°/s

Chandan Kumar Jha et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stretchable and Transparent Kirigami Conductor of Nanowire Percolation Network for Electronic Skin Applications

Philip Won et al.

NANO LETTERS (2019)

Add to Collection

Article Chemistry, Analytical

Cardio-Respiratory Monitoring in Archery Using a Smart Textile Based on Flexible Fiber Bragg Grating Sensors

Daniela Lo Presti et al.

SENSORS (2019)

Add to Collection

Article Chemistry, Analytical

Simultaneous Measurement of Ear Canal Movement, Electromyography of the Masseter Muscle and Occlusal Force for Earphone-Type Occlusal Force Estimation Device Development

Mami Kurosawa et al.

SENSORS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Development of respiratory monitoring and actions recognition based on a pressure sensor with multi-arch structures

Yi Xin et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Article Engineering, Biomedical

A 122 fps, 1 MHz Bandwidth Multi-Frequency Wearable EIT Belt Featuring Novel Active Electrode Architecture for Neonatal Thorax Vital Sign Monitoring

Yu Wu et al.

IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS (2019)

Add to Collection

Article Chemistry, Analytical

MEMS-Based Sensor for Simultaneous Measurement of Pulse Wave and Respiration Rate

Thanh-Vinh Nguyen et al.

SENSORS (2019)

Add to Collection

Article Agriculture, Dairy & Animal Science

Exploring Smart Glasses for Augmented Reality: A Valuable and Integrative Tool in Precision Livestock Farming

Maria Caria et al.

ANIMALS (2019)

Add to Collection

Article Chemistry, Analytical

Multifunctional Textile Platform for Fiber Optic Wearable Temperature-Monitoring Application

Ziyang Xiang et al.

MICROMACHINES (2019)

Add to Collection

Article Engineering, Biomedical

Feasibility of Early Meal Detection Based on Abdominal Sound

Konstanze Koelle et al.

IEEE JOURNAL OF TRANSLATIONAL ENGINEERING IN HEALTH AND MEDICINE (2019)

Add to Collection

Article Electrochemistry

Graphene Smart Textile-BasedWearable Eye Movement Sensor for Electro-Ocular Control and Interaction with Objects

Ata Jedari Golparvar et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Surface-Treated Nanofibers as High Current Yielding Breath Humidity Sensors for Wearable Electronics

Sathvik Ajay Iyengar et al.

ACS APPLIED ELECTRONIC MATERIALS (2019)

Add to Collection

Article Telecommunications

SAFE: Smart helmet for advanced factory environment

Angelo Altamura et al.

INTERNET TECHNOLOGY LETTERS (2019)

Add to Collection

Article Biophysics

Wearable humidity sensor based on porous graphene network for respiration monitoring

Yu Pang et al.

BIOSENSORS & BIOELECTRONICS (2018)

Add to Collection

Article Chemistry, Physical

High Performance Humidity Fluctuation Sensor for Wearable Devices via a Bioinspired Atomic-Precise Tunable Graphene-Polymer Heterogeneous Sensing Junction

Jiang He et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

LC Wireless Sensitive Pressure Sensors With Microstructured PDMS Dielectric Layers for Wound Monitoring

Wen-Jun Deng et al.

IEEE SENSORS JOURNAL (2018)

Add to Collection

Article Engineering, Biomedical

A Low-Power Wearable Stand-Alone Tongue Drive System for People With Severe Disabilities

Ali Jafari et al.

IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

New Wearable Sensor in the Shape of a Braided Cord (Kumihimo)

Yoshiro Tajitsu et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2018)

Add to Collection

Article Biochemical Research Methods

Smart textile for respiratory monitoring and thoraco-abdominal motion pattern evaluation

Carlo Massaroni et al.

JOURNAL OF BIOPHOTONICS (2018)

Add to Collection

Review Biochemical Research Methods

Wearable sensors: modalities, challenges, and prospects

J. Heikenfeld et al.

LAB ON A CHIP (2018)

Add to Collection

Article Chemistry, Analytical

Earable TEMPO: A Novel, Hands-Free Input Device that Uses the Movement of the Tongue Measured with a Wearable Ear Sensor

Kazuhiro Taniguchi et al.

SENSORS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Human motion monitoring in sports using wearable graphene-coated fiber sensors

Jinnan Zhang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A fluorescent wearable platform for sweat Cl- analysis and logic smart-device fabrication based on color adjustable lanthanide MOFs

Xiao-Yu Xu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Multidisciplinary Sciences

Soft, smart contact lenses with integrations of wireless circuits, glucose sensors, and displays

Jihun Park et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Engineering, Electrical & Electronic

A Smart Undershirt for Tracking Upper Body Motions: Task Classification and Angle Estimation

Mohammad Iman Mokhlespour Esfahani et al.

IEEE SENSORS JOURNAL (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Multifunctional Mechanical Sensors for Versatile Physiological Signal Detection

Yu Pang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Design and Implementation of a Drowsiness-Fatigue-Detection System Based on Wearable Smart Glasses to Increase Road Safety

Wan-Jung Chang et al.

IEEE TRANSACTIONS ON CONSUMER ELECTRONICS (2018)

Add to Collection

Article Chemistry, Analytical

Polypyrrole Nanoparticles Based Disposable Potentiometric Sensors

Ewa Jaworska et al.

ELECTROANALYSIS (2017)

Add to Collection

Article Chemistry, Analytical

Wearable Woven Electrochemical Biosensor Patch for Non-invasive Diagnostics

Anil Modali et al.

ELECTROANALYSIS (2016)

Add to Collection

Editorial Material Biochemistry & Molecular Biology

Introduction to biosensors

Nikhil Bhalla et al.

BIOSENSOR TECHNOLOGIES FOR DETECTION OF BIOMOLECULES (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Wearable Chemical Sensors: Present Challenges and Future Prospects

Amay J. Bandodkar et al.

ACS SENSORS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Bioinspired Interlocked and Hierarchical Design of ZnO Nanowire Arrays for Static and Dynamic Pressure-Sensitive Electronic Skins

Minjeong Ha et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Paper-Based Active Tactile Sensor Array

Qize Zhong et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Highly-Effi cient, Flexible Piezoelectric PZT Thin Film Nanogenerator on Plastic Substrates

Kwi-Il Park et al.

ADVANCED MATERIALS (2014)

Add to Collection

Review Biotechnology & Applied Microbiology

Non-invasive wearable electrochemical sensors: a review

Amay J. Bandodkar et al.

TRENDS IN BIOTECHNOLOGY (2014)

Add to Collection

Review Polymer Science

Recent advances in flexible sensors for wearable and implantable devices

Changhyun Pang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Add to Collection

Article Computer Science, Artificial Intelligence

Smart wearable systems: Current status and future challenges

Marie Chan et al.

ARTIFICIAL INTELLIGENCE IN MEDICINE (2012)

Add to Collection

Article Engineering, Biomedical

Wearable Monitoring of Seated Spinal Posture

Lucy E. Dunne et al.

IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS (2008)

Add to Collection

Article Computer Science, Information Systems

Design and implementation of expressive footwear

JA Paradiso et al.

IBM SYSTEMS JOURNAL (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.