☆ 3.9 Review

Breakthrough to the pragmatic evolution of direct ink writing: progression, challenges, and future

PROGRESS IN ADDITIVE MANUFACTURING (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Highly conductive calcium ion-reinforced MXene/sodium alginate aerogel meshes by direct ink writing for electromagnetic interference shielding and Joule heating

Cheng-Zhang Qi et al.

Summary: In this study, an aqueous MXene/sodium alginate ink was used to print aerogel meshes with customized geometries using a direct ink writing approach. The printed aerogel meshes were reinforced by an ion-enhanced strategy, resulting in excellent EMI shielding performance, electrical conductivity, and mechanical properties. Additionally, the printed aerogel meshes can function as a Joule heater, achieving a wide temperature range.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Ceramics

Fabrication of doped ?-tricalcium phosphate bioceramics by Direct Ink Writing for bone repair applications

Nicolas Somers et al.

Summary: Beta-tricalcium phosphate (beta-TCP) is a promising biomaterial for bone regeneration. In this study, macroporous scaffolds were printed using co-doped beta-TCP powders and the Direct Ink Writing process. The co-doped samples exhibited higher thermal stability, densification, and mechanical properties compared to undoped beta-TCP. The printed scaffolds showed reduced macropores and microcracks, improved compressive strengths and densities, and significantly higher values compared to literature data.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Add to Collection

Article Engineering, Environmental

Printable, flexible, breathable and sweatproof bifunctional sensors based on an all-nanofiber platform for fully decoupled pressure-temperature sensing application

Peng Wang et al.

Summary: Flexible bifunctional sensors that mimic human skin function have important applications in intelligent human-machine interaction. This sensor has ultrathin and flexible design, and can measure pressure-induced supercapacitance and temperature-induced resistance without interference. It has high sensitivity and a wide temperature range, as well as humidity inertness, waterproof ability and air permeability, making it suitable for wearable healthcare monitoring.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Recent Development and Applications of Advanced Materials via Direct Ink Writing

Alpha Chi Him Tsang et al.

Summary: Direct ink writing (DIW) is a low-cost and environmentally-friendly method for rapid design and construction of scalable 3D structures, utilizing optimized rheological properties and a wide range of nanomaterials to enhance performance. It has potential applications in medical, energy storage, and environmental treatment fields.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Photoresponsive Movement in 3D Printed Cellulose Nanocomposites

Luca A. E. Mueller et al.

Summary: Photoresponsive soft liquid crystalline elastomers can be 3D printed to achieve precise control, making them promising candidates for soft robotic or muscle-like devices. This study introduces biocompatible cellulose nanocrystals into the material, enabling photomechanical behavior and precise tailoring of mechanical properties.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi et al.

Summary: Direct ink writing (DIW) is a versatile 3D printing technique that allows printing of a wide range of materials. This comprehensive review explores the process of DIW printing of complex 3D structures and discusses its diverse applications in various industries.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

On-Demand Programming of Liquid Metal-Composite Microstructures through Direct Ink Write 3D Printing

Aaron Haake et al.

Summary: A direct ink writing technique has been developed to program the LM microstructure in elastomer composites, enabling the creation of filaments, films, and 3D structures with unique LM microstructures. The printed materials are soft, highly deformable, and can be made locally insulating or electrically conductive using a single ink by controlling the process conditions.

ADVANCED MATERIALS (2022)

Add to Collection

Article Materials Science, Composites

DIW 3D printing of hybrid magnetorheological materials for application in soft robotic grippers

Ruihua Guan et al.

Summary: A new hybrid magnetorheological material has been developed using DIW 3D printing technology. It combines the high magnetorheological effect of magnetorheological fluid with the mechanical stability of magnetorheological elastomer. Compared to single magnetorheological elastomer, the hybrid material exhibits significantly improved magnetorheological effect, with a maximum absolute effect of 11.1 MPa and a maximum relative effect of 7474%. It also demonstrates superior performance in soft robotic grippers, with larger clamping force and faster response rate compared to other actuators.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Polymer Science

4D printing: Pragmatic progression in biofabrication

Janhavi Sonatkar et al.

Summary: This study focuses on the application of 3D and 4D printing techniques in biomedical technology. By using intelligent materials and 4D printing methods, dynamic 3D structures can be created, providing further improvements in the healthcare sector.

EUROPEAN POLYMER JOURNAL (2022)

Add to Collection

Article Pharmacology & Pharmacy

Stereolithography 3D printed implants: A preliminary investigation as potential local drug delivery systems to the ear

Alessandro Triacca et al.

Summary: The current study investigates the use of stereolithography 3D printing technology for personalized medicines, focusing on delivering drugs locally to treat ear infections. Multiple prototypes of drug-loaded implants were created and characterized, and in vitro tests were conducted. The results demonstrate the effectiveness of this technology in drug release and antimicrobial activity.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Direct-ink-writing of multistage-pore structured energy collector with ultrahigh ceramic content and toughness

Fang Chen et al.

Summary: This study presents the fabrication of multistage-pore structured polydimethylsiloxane/barium titanate composites with ultrahigh ceramic content and super toughness using direct-ink-writing technology. The composites exhibit improved mechanical and piezoelectric properties, with stable and repeatable elasticity even after cyclic compression and voltage cycles.

MATERIALS & DESIGN (2022)

Add to Collection

Article Polymer Science

A Heating-Assisted Direct Ink Writing Method for Preparation of PDMS Cellular Structure with High Manufacturing Fidelity

Kang Xu et al.

Summary: This study proposed a heating-assisted direct writing printing method for commercial silicone rubber materials, aiming to enhance the fidelity of silicone foam preparation. Experimental results showed that the addition of a thermal field significantly improved the collapse of silicone rubber filaments, thereby enhancing the mechanical properties and manufacturing stability of silicon foams.

POLYMERS (2022)

Add to Collection

Article Engineering, Manufacturing

Semi-solid epoxy feedstocks with high glass transition temperature for material extrusion additive manufacturing

Madeline G. Wimmer et al.

Summary: This study designs and characterizes a semi-solid epoxy/nanoclay composite feedstock for material extrusion additive manufacturing. The resulting composite exhibits high temperature stability and printing performance, as well as excellent mechanical and thermal properties.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

4D printing of tracheal scaffold using shape-memory polymer composite

Harsh Pandey et al.

Summary: Additive manufacturing of shape memory materials allows for modification of the shape and functionality of static structures. This study explores the shape-memory effect of different compositions of biodegradable polymers and investigates the biomedical application of the printed structures using 4D printing technology.

MATERIALS LETTERS (2022)

Add to Collection

Review Automation & Control Systems

Modeling and simulation of metal selective laser melting process: a critical review

Ruihu Zhou et al.

Summary: This paper discusses the application of selective laser melting in metal printing and highlights the challenges in establishing the relationship between SLM process and performance. The paper also discusses the analytical and simulation models based on physical theory and data driven approach, as well as the use of finite element software for solving nonlinear equations and the application of machine learning in SLM process optimization.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Manufacturing

Three-dimensional printing of silver nanoparticle-decorated graphene microarchitectures

Muhammad Wajahat et al.

Summary: Functionalized graphene with inorganic nanomaterials has enhanced electrical and electrochemical properties. 3D printing is used to fabricate silver nanoparticle-decorated graphene microarchitectures, showing potential applications in flexible electronic devices.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Engineering, Mechanical

3D Printing of Silicone Elastomers for Soft Actuators

Jiachen Li et al.

Summary: This report presents a comprehensive guide for 3D printing of silicone elastomers using the direct ink writing (DIW) process. It covers material, equipment, and process dilemmas and provides optimal printing parameters. The feasibility of printing soft materials using DIW process is demonstrated in various application scenarios.

ACTUATORS (2022)

Add to Collection

Review Polymer Science

Engineering properties of Teflon derived blends and composites: a review

Sarang S. Shindalkar et al.

Summary: This review focuses on the tribological performance of polytetrafluoroethylene (PTFE, commonly known as Teflon) derived blends and composites at different grades, and details the optimized casting process and rational design principles. The desired wear rate and excellent thermal conductivity of actual Teflon components are demonstrated through bird's eye view, and the engineering properties of Teflon for future prospects and applications as emerging high-performance thermoplastics are revealed.

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Environmentally stable MXene ink for direct writing flexible electronics

Na Kong et al.

Summary: MXene inks show promise for fabricating conductive circuits and flexible devices, and can be used with commercial rollerball pens to write electronic circuits on flexible substrates.

NANOSCALE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Direct ink writing of polycaprolactone/polyethylene oxide based 3D constructs

Bin Zhang et al.

Summary: This study explores the use of DIW to process hydrophobic polymers containing temperature-sensitive components in biomedical applications. The research focuses on the development of liquid feed stocks based on hydrogel for ink development, as well as modification using polycaprolactone and polyethylene oxide in solvent systems. Results suggest that DIW offers a new method for processing hydrophobic polymers in biomedical applications.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Patterned Actuators via Direct Ink Writing of Liquid Crystals

Marc del Pozo et al.

Summary: This study demonstrates the production of patterned actuators using direct ink writing, achieving multifunctionality and multiple shape changes between single- and bilayer films. Partially covered films and the application of liquid crystal inks provide space for creating novel actuators with enhanced capabilities.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Polymer Science

Functionalized polylysine biomaterials for advanced medical applications: A review

Nikhil Avinash Patil et al.

Summary: Polylysine, a special type of polyamide showing significant results in biomedical applications, is praised for its water solubility, biocompatibility, and stimuli-responsive characteristics. It is widely used in targeted drug delivery systems and bio-adhesives for tissue transplantation in the biomedical sector.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Engineering, Multidisciplinary

Direct ink writing (DIW) of structural and functional ceramics: Recent achievements and future challenges

Aamir Shahzad et al.

Summary: This paper outlines the current state-of-the-art manufacturing of various ceramics using the DIW technique, highlighting the innovations and challenges associated with this approach.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Polymer Science

Bioactive glass with biocompatible polymers for bone applications

Janhavi Sonatkar et al.

Summary: Bioactive glasses have been traditionally used for permeating and repairing bone defects, with 45S5 Bio glass being a prime artificial material developed by Larry Hench. These materials have exceptional biocompatibility and can form a HA coat in the body. Various synthesis techniques have been developed for bioactive glasses containing biocompatible polymers, aiming to review the modern evolution of glass for bone regeneration. These glasses can connect to osseous matter and restore new bone growth over time, ultimately restoring the ailing or defective bone to its original condition and function.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Physics, Applied

Magnetic properties of bulk nanocrystalline cobalt ferrite obtained by high-pressure field assisted sintering

Angelica Baldini et al.

Summary: The study found that highly pure nanostructured ferrite particles can be synthesized using a simple method and densified through high-pressure field-assisted sintering to obtain materials with complex microstructures. During sintering, there was no change in phase composition, and a high degree of densification while maintaining nanometric crystallite size was achieved by using high uniaxial pressure with relatively low sintering temperatures and times.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

Add to Collection

Article Engineering, Manufacturing

Direct-ink writing of strong and biocompatible titanium scaffolds with bimodal interconnected porosity

M. Coffigniez et al.

Summary: This study developed Ti64 scaffolds with interconnected porosity networks using additive manufacturing technology. By adjusting the amount of Pluronic F-127 in the ink and the solid loading, the best printing performance was achieved. After sintering, the scaffolds exhibited excellent mechanical properties and microstructure, showing great potential for load-bearing implants.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Direct ink writing of metal parts with curing by UV light irradiation

Haojie Wang et al.

Summary: A low-cost 3D printing technology for metal parts was developed by combining direct ink writing technology with UV light curing. The study showed that the technology can achieve high-quality metal parts without pores or defects, providing a promising method for printing metal parts with complex shapes.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection

Article Polymer Science

Study on ink flow of silicone rubber for direct ink writing

Yuanrui Shao et al.

Summary: This paper explores the potential of direct ink writing of soft materials in 3D printing, focusing on the rheological properties of silicone rubber inks and their impact on the printing process. The study provides a foundation for parameter configuration and ink viscosity adjustment, while also offering new insights into filament diameter adjustment through investigating the die swell ratio of nano-silica-reinforced silicone rubber inks.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Pharmacology & Pharmacy

Machine Learning and Machine Vision Accelerate 3D Printed Orodispersible Film Development

Colm S. O'Reilly et al.

Summary: Orodispersible films (ODFs) are a promising delivery system in various clinical applications, but their manufacturing lacks personalized, on-demand or sustainable approaches. To address this, 3D printing and machine learning technologies were utilized for on-demand production and quality control of ODFs. The combination of these technologies showed potential for rapid production and verification of ODFs, as well as automation of in vitro testing using machine vision tools.

PHARMACEUTICS (2021)

Add to Collection

Article Engineering, Manufacturing

3D printing of metals using biodegradable cellulose hydrogel inks

Carla Joyce C. Nocheseda et al.

Summary: Additive manufacturing digitally deposits materials to form a 3D structure, with a focus on metal structures for safer and less expensive alternatives. A study presents a method for printing metallic structures using a biodegradable cellulose hydrogel and water-based composite ink, discussing optimized porous metallic structures for potential biomedical and energy applications.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Polymer Science

3D Printable Conducting and Biocompatible PEDOT-graft-PLA Copolymers by Direct Ink Writing

Antonio Dominguez-Alfaro et al.

Summary: Tailor-made polymers are crucial for the development of additive manufacturing. Through synthesizing conducting and biocompatible graft copolymers, complex devices can be 3D printed with high resolution. The study demonstrates the successful use of PEDOT-g-PLA copolymers for printing conductive and biocompatible patterns.

MACROMOLECULAR RAPID COMMUNICATIONS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Reviews on Machine Learning Approaches for Process Optimization in Noncontact Direct Ink Writing

Haining Zhang et al.

Summary: Noncontact direct ink writing technology shows great potential in manufacturing low-cost and customized device applications, but its electrical performance is still limited by printing quality, leading to an increased interest in machine learning for process optimization. While machine learning can optimize the printing process, it is currently limited to specific aspects. A systematic process optimization approach integrating the latest machine learning techniques is needed to fully optimize printing quality.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Engineering, Biomedical

Biomedical Applications of Metal 3D Printing

Luis Fernando Velasquez-Garcia et al.

Summary: Additive manufacturing is suitable for a wide range of biomedical applications due to its customization, low cost, seamless interface with medical imaging techniques, and ability to create free-form objects in biocompatible and biodegradable materials.

ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 23, 2021 (2021)

Add to Collection

Article Chemistry, Applied

Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels

Hossein Baniasadi et al.

Summary: The cellulose nanofibrils reinforced aloe vera bio-hydrogels developed through DIW technique exhibited excellent viscoelastic properties and wet stability, making them promising for biomedical applications.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

3D-Printed Electromagnetic Actuator for Bionic Swimming Robot

Changyou Yan et al.

Summary: This paper presents the design and fabrication of a 3D-printed bionic robotic fish, utilizing direct ink writing (DIW) 3D printing technology. The robotic fish is composed of key components such as fins, body, battery, and controller, enabling it to swim through the conversion of electric energy to mechanical energy. With optimized shape and good mobility, this underwater robot showcases extensive applications in underwater activities and other specialized tasks.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Rafael S. Pinto et al.

Summary: This study demonstrates the preparation of electroactive films and membranes using direct-ink writing technology for sensors/actuators and energy storage systems. By varying solvent evaporation temperature and fill density percentage, different morphologies and properties of PVDF and PVDF-HFP materials were obtained, showing potential for environmental-friendly device development in electronics and energy fields.

MACROMOLECULAR MATERIALS AND ENGINEERING (2021)

Add to Collection

Article Engineering, Manufacturing

Effect of material extrusion process parameters on filament geometry and inter-filament voids in as-fabricated high solids loaded polymer composites

Sungwoo Jang et al.

Summary: This study examines the effects of four key process parameters on filament geometry and interfilament void formation in high solids loaded polymer composites printed via material extrusion additive manufacturing. It found that layer height plays the most significant role in line aspect ratios and void formation in printed structures. The results suggest a method to control porosity in fully dense structures with high solids loaded inks using the layer height parameter while maintaining geometric accuracy.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Review Engineering, Multidisciplinary

Processes and materials used for direct writing technologies: A review

Shahriar Bakrani Balani et al.

Summary: Direct Writing (DW), also known as Robocasting, is a layer-by-layer manufacturing technique suitable for complex geometries, using various materials like metals, composites, ceramics, and biomaterials. Recent studies indicate a trend towards developing new materials and applications with DW, emphasizing the need for a deep understanding of principles and parameters. The review highlights different DW techniques, material advancements, applications, process parameters, and challenges, focusing mainly on the ceramic extrusion process for quality improvement and new developments.

RESULTS IN ENGINEERING (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A short review on 3D printing methods, process parameters and materials

M. Manoj Prabhakar et al.

Summary: Additive manufacturing technology has a significant impact on the modern world due to its ability to produce complex geometries. The addition of fillers enhances the functionality and flexibility of 3D printing. Adjusting input parameters can optimize output results, aiding in the selection of the most suitable approach for specific applications.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Direct ink writing of energy materials

S. Tagliaferri et al.

Summary: This review discusses the application of 3D printing technology in sustainable energy device fabrication, focusing on the growth of extrusion-based 3D printing in manufacturing batteries, supercapacitors, and catalytic systems. The critical role of ink formulation and rheological characteristics on the functional performance of printed devices is emphasized, along with a review of strategies for obtaining printable inks from energy materials and the challenges and opportunities for future development.

MATERIALS ADVANCES (2021)

Add to Collection

Article Materials Science, Biomaterials

Development of highly porous, Electrostatic force assisted nanofiber fabrication for biological applications

Anukrishna Eratt Purushothaman et al.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Modeling of EHD inkjet printing performance using soft computing-based approaches

Amit Kumar Ball et al.

SOFT COMPUTING (2020)

Add to Collection

Article Chemistry, Applied

Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials

Hannah Woods et al.

PROPELLANTS EXPLOSIVES PYROTECHNICS (2020)

Add to Collection

Review Polymer Science

Mxene functionalized polymer composites: Synthesis and applications

John Jimmy et al.

EUROPEAN POLYMER JOURNAL (2020)

Add to Collection

Review Polymer Science

4D printing of shape memory polymers

Alsha Subash et al.

EUROPEAN POLYMER JOURNAL (2020)

Add to Collection

Article Materials Science, Ceramics

Additive manufacturing of zirconia parts with organic sacrificial supports

Wenbin Li et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Direct Ink Writing Glass: A Preliminary Step for Optical Application

Bo Nan et al.

MATERIALS (2020)

Add to Collection

Article Polymer Science

Influence of Manufacturing Parameters and Post Processing on the Electrical Conductivity of Extrusion-Based 3D Printed Nanocomposite Parts

Ruben Paz et al.

POLYMERS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

3D printing of hydrogels: Rational design strategies and emerging biomedical applications

Jinhua Li et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

Nestor Washington Solis Pinargote et al.

NANOMATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

3D printed scaffolds for biomedical applications

M. Vishnumaya Varma et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Chemistry, Physical

3D-Printable Carbon Nanotubes-Based Composite for Flexible Piezoresistive Sensors

Chaima Fekiri et al.

MATERIALS (2020)

Add to Collection

Review Polymer Science

3D Printing for Hip Implant Applications: A Review

Obinna Okolie et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Biomedical

Machine learning-based design strategy for 3D printable bioink: elastic modulus and yield stress determine printability

Jooyoung Lee et al.

BIOFABRICATION (2020)

Add to Collection

Article Chemistry, Physical

Direct ink writing advances in multi-material structures for a sustainable future

Victoria G. Rocha et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Engineering, Industrial

Machine learning for continuous liquid interface production: Printing speed modelling

Haiyang He et al.

JOURNAL OF MANUFACTURING SYSTEMS (2019)

Add to Collection

Review Engineering, Biomedical

Review of alginate-based hydrogel bioprinting for application in tissue engineering

Prasansha Rastogi et al.

BIOFABRICATION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Direct-Ink-Write 3D Printing of Hydrogels into Biomimetic Soft Robots

Yin Cheng et al.

ACS NANO (2019)

Add to Collection

Review Chemistry, Physical

3D Printing of Bioceramic Scaffolds-Barriers to the Clinical Translation: From Promise to Reality, and Future Perspectives

Kang Lin et al.

MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Cell alignment and accumulation using acoustic nozzle for bioprinting

Yannapol Sriphutkiat et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Engineering, Mechanical

Micro-extrusion-based additive manufacturing with liquid metals and alloys: Flow and deposition driven by oxide skin mechanics

Abhishek Gannarapu et al.

EXTREME MECHANICS LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Multifunctional silicon carbide matrix composites optimized by three-dimensional graphene scaffolds

Xiao You et al.

CARBON (2019)

Add to Collection

Article Materials Science, Ceramics

Fabrication of bulk piezoelectric and dielectric BaTiO3 ceramics using paste extrusion 3D printing technique

Hoejin Kim et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Review Materials Science, Ceramics

3D printing of ceramics: A review

Zhangwei Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports

Chao Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Polymer Science

Fused deposition processing polycaprolactone of composites for biomedical applications

Arya Prasad et al.

POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2019)

Add to Collection

Article Engineering, Manufacturing

Autonomous in-situ correction of fused deposition modeling printers using computer vision and deep learning

Zeqing Jin et al.

MANUFACTURING LETTERS (2019)

Add to Collection

Review Engineering, Electrical & Electronic

Recent Progress of Direct Ink Writing of Electronic Components for Advanced Wearable Devices

Yubai Zhang et al.

ACS APPLIED ELECTRONIC MATERIALS (2019)

Add to Collection

Article Polymer Science

Biomimetic Design of Artificial Materials Inspired by Iridescent Nacre Structure and Its Growth Mechanism

Navneet Mishra et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices

Yanqiu Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Liquid Crystal Elastomeric Actuators with Spatially Programed Nematic Order

Arda Kotikian et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Engineering, Biomedical

Learning-Based Cell Injection Control for Precise Drop-on-Demand Cell Printing

Jia Shi et al.

ANNALS OF BIOMEDICAL ENGINEERING (2018)

Add to Collection

Article Materials Science, Ceramics

3D-printed graphene-Al2O3 composites with complex mesoscale architecture

Carmen R. Tubio et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Computer Science, Software Engineering

Infill Optimization for Additive Manufacturing-Approaching Bone-Like Porous Structures

Jun Wu et al.

IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS (2018)

Add to Collection

Article Materials Science, Composites

Tensile properties, void contents, dispersion and fracture behaviour of 3D printed carbon nanofiber reinforced composites

Easir Arafat Papon et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)

Add to Collection

Review Materials Science, Biomaterials

Biocompatible alkyl cyanoacrylates and their derivatives as bio-adhesives

Jay M. Korde et al.

BIOMATERIALS SCIENCE (2018)

Add to Collection

Article Engineering, Chemical

Biomimicking of Hierarchal Molluscan Shell Structure Via Layer by Layer 3D Printing

Ramdayal Yadav et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Blending Electronics with the Human Body: A Pathway toward a Cybernetic Future

Mehdi Mehrali et al.

ADVANCED SCIENCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Environment-friendly and reusable ink for 3D printing of metallic structures

Chao Xu et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Living Responsive Materials and Devices

Xinyue Liu et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks

Hyunwoo Yuk et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Progress in 3D Printing of Carbon Materials for Energy-Related Applications

Kun Fu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Materials Science, Ceramics

Direct ink writing of ceramic matrix composite structures

Giorgia Franchin et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Add to Collection

Review Chemistry, Multidisciplinary

3D printed functional nanomaterials for electrochemical energy storage

Cheng Zhu et al.

NANO TODAY (2017)

Add to Collection

Article Multidisciplinary Sciences

Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing

Amin M'Barki et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Proceedings Paper Engineering, Manufacturing

A novel 3D additive manufacturing machine to biodegradable stents

A. Guerra et al.

MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)

Add to Collection

Article Chemistry, Physical

Fabrication and Characterization of 3D-Printed Highly-Porous 3D LiFePO4 Electrodes by Low Temperature DirectWriting Process

Changyong Liu et al.

MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Skin-Inspired Multifunctional Autonomic-Intrinsic Conductive Self-Healing Hydrogels with Pressure Sensitivity, Stretchability, and 3D Printability

Mohammad Ali Darabi et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printed Transparent Glass

Du T. Nguyen et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Additive Manufacturing of Metal Structures at the Micrometer Scale

Luca Hirt et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Gigahertz Electromagnetic Structures via Direct Ink Writing for Radio-Frequency Oscillator and Transmitter Applications

Nanjia Zhou et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures

Gilberto Siqueira et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Transparent and Conductive Heterogeneous Hydrogel-Elastomer Systems

Kevin Tian et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries

Kun Fu et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores

Cheng Zhu et al.

NANO LETTERS (2016)

Add to Collection

Article Multidisciplinary Sciences

Laser-assisted direct ink writing of planar and 3D metal architectures

Mark A. Skylar-Scott et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of highly conductive graphene flexible circuits by 3D printing

Di Zhang et al.

SYNTHETIC METALS (2016)

Add to Collection

Article Multidisciplinary Sciences

Multi-shape active composites by 3D printing of digital shape memory polymers

Jiangtao Wu et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Multidisciplinary Sciences

Multifunctional 3D printing of heterogeneous hydrogel structures

Ali Nadernezhad et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Printing in Three Dimensions with Graphene

Esther Garcia-Tunon et al.

ADVANCED MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

25th Anniversary Article: Engineering Hydrogels for Biofabrication

Jos Malda et al.

ADVANCED MATERIALS (2013)

Add to Collection

Article Mechanics

Simple Navier's slip boundary condition for the non-Newtonian Lattice Boltzmann fluid dynamics solver

Oldrich Svec et al.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Bionic Ears

Manu S. Mannoor et al.

NANO LETTERS (2013)

Add to Collection

Article Materials Science, Ceramics

Direct-write assembly of silicate and borate bioactive glass scaffolds for bone repair

Aylin M. Deliormanli et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Add to Collection

Article Engineering, Biomedical

Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration

Qiang Fu et al.

ACTA BIOMATERIALIA (2011)

Add to Collection

Article Chemistry, Physical

Direct-write assembly of biomimetic microvascular networks for efficient fluid transport

Willie Wu et al.

SOFT MATTER (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Direct-Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth

Robert A. Barry et al.

ADVANCED MATERIALS (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Direct-write assembly of microperiodic silk fibroin scaffolds for tissue engineering applications

Sourabh Ghosh et al.

ADVANCED FUNCTIONAL MATERIALS (2008)

Add to Collection

Article Cell & Tissue Engineering

Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing

Robert Chang et al.

TISSUE ENGINEERING PART A (2008)

Add to Collection

Article Engineering, Mechanical

Numerical analysis of wall slip effects on flow of Newtonian and non-Newtonian fluids in macro and micro contraction channels

Alfeus Sunarso et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2007)

Add to Collection

Article Materials Science, Ceramics

Direct ink writing of three-dimensional ceramic structures

Jennifer A. Lewis et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Add to Collection

Article Chemistry, Multidisciplinary

Direct ink writing of 3D functional materials

Jennifer A. Lewis

ADVANCED FUNCTIONAL MATERIALS (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Direct writing in three dimensions

Jennifer A. Lewis et al.

MATERIALS TODAY (2004)

Add to Collection

Article Chemistry, Multidisciplinary

Colloidal inks for directed assembly of 3-D periodic structures

JE Smay et al.

LANGMUIR (2002)

Add to Collection

Article Materials Science, Ceramics

Robocast Pb(Zr0.95Ti0.05)O3 ceramic monoliths and composites

BA Tuttle et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.