3.8 Article

Wet anisotropic etching characteristics of Si{111} in NaOH-based solution for silicon bulk micromachining

Related references

Note: Only part of the references are listed.
Article Engineering, Electrical & Electronic

Wet bulk micromachining characteristics of Si{110} in NaOH-based solution

S. Purohit et al.

Summary: This research investigates the etching characteristics of Si{110} in 10 M sodium hydroxide with and without the addition of hydroxylamine (NH2OH). The incorporation of NH2OH significantly improves the etch rate and the corner undercutting. The findings are useful for scientists and engineers in the fabrication of MEMS structures using wet anisotropic etching and have the potential to promote the application of wet etching in MEMS.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2022)

Proceedings Paper Engineering, Industrial

Fabrication of 3-D Light Concentrating Microphotonic Structures by Anisotropic Wet Etching of Silicon

Grant W. Bidney et al.

Summary: Silicon has been commonly used in the MEMS community for the past sixty years, and anisotropic wet etching with TMAH has been central to these fabrication efforts. This study fabricated four types of light concentrating arrays using TMAH wet etching, and demonstrated their potential for optical applications.

ADVANCED FABRICATION TECHNOLOGIES FOR MICRO/NANO OPTICS AND PHOTONICS XV (2022)

Article Nanoscience & Nanotechnology

Multiple ratiometric nanothermometry using semiconductor BiFeO3 nanowires and quantitative validation of thermal sensitivity

K. Prashanthi et al.

Summary: In this study, a luminescence-based temperature sensor was developed using conventional photoluminescence and negative thermal quenching mechanisms. The experimental results demonstrated the high thermal sensitivity of BFO nanowires, making them excellent candidates for high-performance temperature sensors.

MICRO AND NANO SYSTEMS LETTERS (2022)

Article Nanoscience & Nanotechnology

Systematic study of the etching characteristics of Si{111} in modified TMAH

Veerla Swarnalatha et al.

MICRO & NANO LETTERS (2020)

Review Engineering, Electrical & Electronic

Anisotropic etching of Si

Irena Zubel

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)

Article Materials Science, Multidisciplinary

Aging Effects of KOH+NH2OH Solution on the Etching Characteristics of Silicon

Avvaru Venkata Narasimha Rao et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2019)

Article Nanoscience & Nanotechnology

Effective improvement in the etching characteristics of Si{110} in low concentration TMAH solution

Veerla Swarnalatha et al.

MICRO & NANO LETTERS (2018)

Article Engineering, Electrical & Electronic

The effect of monohydric and polyhydric alcohols on silicon anisotropic etching in KOH solutions

Irena Zubel et al.

SENSORS AND ACTUATORS A-PHYSICAL (2017)

Article Materials Science, Multidisciplinary

Effect of NH2OH on Etching Characteristics of Si{100} in KOH Solution

Avvaru Venkata Narasimha Rao et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2017)

Article Engineering, Electrical & Electronic

Modified TMAH based etchant for improved etching characteristics on Si{100} wafer

V. Swarnalatha et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)

Article Engineering, Electrical & Electronic

Fabrication of micron-sized tetrahedra by Si⟨111⟩ micromachining and retraction edge lithography

Rajeevan Kozhummal et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)

Article Engineering, Electrical & Electronic

Surface tension and its role for vertical wet etching of silicon

A. Brockmeier et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)

Article Engineering, Electrical & Electronic

Fabrication of novel microstructures based on orientation-dependent adsorption of surfactant molecules in a TMAH solution

Prem Pal et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2011)

Article Engineering, Electrical & Electronic

Fabrication methods based on wet etching process for the realization of silicon MEMS structures with new shapes

Prem Pal et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2010)

Article Engineering, Electrical & Electronic

Atomistic mechanism for the macroscopic effects induced by small additions of surfactants to alkaline etching solutions

M. A. Gosalvez et al.

SENSORS AND ACTUATORS A-PHYSICAL (2010)

Article Engineering, Electrical & Electronic

Absolute etch rates in alkaline etching of silicon (111)

I. A. Shah et al.

SENSORS AND ACTUATORS A-PHYSICAL (2010)

Article Engineering, Electrical & Electronic

Improvement in smoothness of anisotropically etched silicon surfaces:: Effects of surfactant and TMAH concentrations

D Cheng et al.

SENSORS AND ACTUATORS A-PHYSICAL (2006)

Article Engineering, Electrical & Electronic

Effects of mechanical agitation and surfactant additive on silicon anisotropic etching in alkaline KOH solution

CR Yang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2005)

Article Engineering, Electrical & Electronic

Effects of various ion-typed surfactants on silicon anisotropic etching properties in KOH and TMAH solutions

CR Yang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2005)

Article Engineering, Electrical & Electronic

Fast etching of silicon with a smooth surface in high temperature ranges near the boiling point of KOH solution

H Tanaka et al.

SENSORS AND ACTUATORS A-PHYSICAL (2004)

Article Engineering, Electrical & Electronic

The diagnostic micromachined beams on (111) substrate

HH Hu et al.

SENSORS AND ACTUATORS A-PHYSICAL (2001)

Article Engineering, Electrical & Electronic

Etching methodologies in < 111 >-oriented silicon wafers

RE Oosterbroek et al.

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2000)