4.0 Article

Effects of initial wettability and different surfactant-silica nanoparticles flooding scenarios on oil-recovery from carbonate rocks

Journal

PETROLEUM
Volume 7, Issue 4, Pages 499-508

Publisher

KEAI PUBLISHING LTD
DOI: 10.1016/j.petlm.2021.03.009

Keywords

LABSA; Enhanced oil recovery; Silica nanoparticles; IFT; Contact angle; Adsorption; Carbonates

Ask authors/readers for more resources

The initial wettability of rock surfaces plays a crucial role in the efficiency of displacement during core flooding experiments. This study utilized linear alkylbenzene sulfonic acid (LABSA) and silica nanoparticles (NPs) as enhanced oil recovery (EOR) agents to improve oil recovery from carbonate rock samples. The results showed that LABSA and SiO2 NPs effectively reduced the oil-water interfacial tension and contact angle, with SiO2 NPs further decreasing the interfacial tension and surfactant adsorption on the rock surfaces. Core flooding experiments also demonstrated that the injection of a combination of LABSA and SiO2 in the secondary mode achieved the highest ultimate oil recovery from carbonate core samples.
Initial wettability of rock surfaces plays a crucial role in displacement efficiency during core flooding experiments. In this study, linear alkylbenzene sulfonic acid (LABSA) and silica nanoparticles (NPs) were utilized as enhanced oil recovery (EOR) agents to improve oil recovery from carbonate rock samples. Prior to the core flooding experiments, effects of the presence of LABSA and SiO2 NPs on oil-water interfacial tension (IFT), wettability alteration, and surfactant adsorption on the rock surfaces were evaluated. The results of IFT/contact angle measurements showed that by adding 0.03 wt% LABSA, the IFT, and contact angle reduced from the initial values of 36.9 mN/m and 115.6 degrees +/- 0.2 degrees to 8.3 mN/m and 100.3 degrees +/- 0.4 degrees, respectively. Furthermore, incorporating SiO2 NPs (0.1 wt%) into the system causes a further decrease in IFT value (dropped to 2.2 mN/m), along with a substantial reduction in contact angle (final contact angle after 6 h soaking into the solution was measured as 64.8 degrees +/- 0.3 degrees). In addition, sur-factant loss due to the adsorption on the rock surfaces decreased up to 35% in the presence of SiO2 NPs (0.1 wt%). Moreover, various core flooding scenarios in carbonate plugs with different initial wettability conditions were conducted, and the performance of the EOR agents in enhancing oil recovery from oil-wet and water-wet core samples in the secondary and tertiary mode of flooding was evaluated. The outcomes revealed that the injection of a combination of chemicals, containing LABSA (0.03 wt %) and SiO2 (0.1 wt%) in the secondary mode leads to the highest ultimate oil recovery from sister carbonate core samples.(c) 2021 Southwest Petroleum University. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY license (http://creativecommons. org/licenses/by/4.0/).

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.0
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available