☆ 4.6 Article

The role of jet-to-crossflow velocity ratio on convective heat transfer enhancement in the cooling of discrete heating modules

THERMAL SCIENCE AND ENGINEERING PROGRESS (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Turbulent flow and heat transfer characteristics of an impinging jet over a heated wall-mounted cube placed in a cross-flow

Basheer A. Khan et al.

Summary: This study focuses on the turbulent flow and heat transfer of an impinging jet over a heated cube. The research indicates that the heat transfer on the top and side surfaces of the cube can be significantly improved by the jet impingement.

PHYSICS OF FLUIDS (2022)

Add to Collection

Article Thermodynamics

On numerical investigation of heat transfer augmentation of flat target surface under impingement of steady air jet for varying heat flux boundary condition

Mohammed Umair Siddique et al.

Summary: This study uses a turbulence model to simulate flow fields under different boundary conditions to determine the cooling characteristics at various impinging Reynolds numbers and nozzle-target spacing. The Nusselt number profiles show varying trends under different conditions, with local heat transfer being significantly influenced by nozzle-target spacing. The correlation between heat flux parameter and impinging Reynolds number is established to obtain a semi-empirical prediction.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Thermodynamics

A computational analysis on convective heat transfer for impinging slot nanojets onto a moving hot body

Hakan Cosanay et al.

Summary: This study performs computational analysis on the steady flow and heat transfer due to a slot nanojet impingement onto a heated moving body, considering the unsteady flow effects and interactions of multiple impinging jets. The finite volume method was used for numerical simulation, studying the influence of various parameters on convective heat transfer characteristics in the transient regime. The findings suggest that the flow field and heat transfer become complicated due to the interaction of multiple impinging jets with the movement of the hot body, with higher heat transfer rates achieved at higher Reynolds numbers and minimal impact from nanoparticle inclusion on flow friction.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2022)

Add to Collection

Article Thermodynamics

Constructal enhancement of cooling performance of local heating elements with different heat generation rates under free and mixed convection regimes

Bugra Sarper et al.

Summary: This study investigates the optimum heat generation rate of local heating elements with different heat generation rates in a vertical duct through experimental and numerical studies. The results show that a lower heat generation rate of heating elements improves the cooling performance of the system.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Energy & Fuels

Thermoelectric Generation with Impinging Nano-Jets

Fatih Selimefendigil et al.

Summary: The study examines the impact of nanofluid jets on thermoelectric generation, finding that increasing jet Reynolds numbers and nanoparticle volume fractions can enhance power and efficiency. The horizontal distance between the jet inlet and the thermoelectric device also affects power generation and conversion efficiency, with smaller distances resulting in higher power generation but the optimum value for efficiency being at zh = 2.5ws. Regression models are developed for predicting generated power and conversion efficiencies.

ENERGIES (2021)

Add to Collection

Article Thermodynamics

Semi-analytical study of impingement cooling of metal foam heat sinks of CPUs with air and hydrogen jets under LTNE condition

Salar Soltangheis et al.

Summary: This paper presents a mathematical model for heat transfer in a heat sink covered by an open-cell metal foam under impinging jet flow. The differences between numerical predictions under the local thermal equilibrium (LTE) and local thermal non-equilibrium (LTNE) conditions on flow and temperature distributions were analyzed. It was shown that the effective thermal conductivity ratio significantly affects the deviation between LTNE and LTE models. Additionally, the effects of critical dimensionless parameters on the flow and heat transfer characteristics were investigated, showing that cooling performance of the metal foam can be improved by adjusting Reynolds and Darcy numbers and heat sink aspect ratio.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Jet Impingement Cooling in Power Electronics for Electrified Automotive Transportation: Current Status and Future Trends

Samantha Jones-Jackson et al.

Summary: Effective thermal management of power electronics in electric vehicles is crucial for reliability and increased power density. This article focuses on jet impingement as an advanced cooling technique, discussing its proven thermal performance in high-heat-flux applications and future technology development. Factors such as heat transfer, pressure drop, reliability, and current technical gaps and challenges in jet impingement research in electrified transportation are also highlighted.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Thermodynamics

Heat transfer enhancement of laminar impinging slot jets by nanofluids and metal foams

Vincenzo Bianco et al.

Summary: The study focuses on impinging slot jets in a confined channel filled with metal foam saturated with nanofluids. Results show that convective heat transfer coefficients increase with Peclet number and decrease with volumetric concentration, with different behavior observed for surface heat transfer coefficient. Correlations for average total Nusselt number in terms of porosity and volumetric concentration are proposed.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)

Add to Collection

Article Thermodynamics

Three-dimensional turbulent forced convection around a hot cubic block exposed to a cross-flow and an impinging jet

Bouziane Boudraa et al.

Summary: This numerical study investigates the effects of Reynolds number ratio on flow and heat transfer in a turbulent forced convection flow around a hot cubic block. The results show that heat transfer increases with an increase in Reynolds number ratio, and better cooling occurs at the top of the cube with higher speed of the impinging jet. Adjusting the channel height and jet axis location can also improve heat transfer. The simulations are compared with experimental data using different turbulence models.

HEAT TRANSFER (2021)

Add to Collection

Review Thermodynamics

Experimental analysis of the thermal performance on electronic cooling by a combination of cross-flow and an impinging air jet

Yunesky Masip et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Engineering, Manufacturing

Air Jet Impingement Cooling of Electronic Devices Using Additively Manufactured Nozzles

Beomjin Kwon et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Thermodynamics

Numerical simulations of a double-wall cooling with internal jet impingement and external hexagonal arrangement of film cooling holes

Yuyang Liu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

Add to Collection

Article Thermodynamics

Experimental and numerical investigation of jet impingement cooling using extended jet holes

Ahmet Umit Tepe et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Turbulent swirling impinging jet arrays: A numerical study on fluid flow and heat transfer

Sudipta Debnath et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2020)

Add to Collection

Article Thermodynamics

Numerical study of laminar pulsed impinging jet on the metallic foam blocks using the local thermal non-equilibrium model

Seyed Mostafa Hosseinalipour et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Thermodynamics

HEAT TRANSFER ENHANCEMENT CAUSED BY IMPINGING JETS OF Al2O3-WATER NANOFLUID ON AMICRO-PIN FIN ROUGHENED SURFACE UNDER CROSSFLOW CONDITIONS-A NUMERICAL STUDY

Usman Allauddin et al.

JOURNAL OF ENHANCED HEAT TRANSFER (2020)

Add to Collection

Article Mechanics

NUMERICAL ANALYSIS OF COOLING AN ELECTRONIC CIRCUIT COMPONENT WITH CROSS FLOW AND JET COMBINATION

T. Demircan

JOURNAL OF MECHANICS (2019)

Add to Collection

Article Thermodynamics

Impingement/effusion cooling of electronic components with cross-flow

Hussein M. Maghrabie et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Heat transfer correlation for a triangular protruded surface with a cross-flow jet

Poonam Prusty et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2019)

Add to Collection

Article Thermodynamics

Numerical investigation on conjugate heat transfer of impingement/effusion double-wall cooling with different crossflow schemes

Guanjiang Chen et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Effects of Extended Jet Holes to Heat Transfer and Flow Characteristics of the Jet Impingement Cooling

Ahmet Umit Tepe et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Thermodynamics

Experimental and Numerical Investigations on Jet Impingement Cooling for Electronic Modules

Wen-Xiao Chu et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Thermodynamics

Heat transfer investigation of an array of jets impinging on a target plate with detached ribs

Robin Brakmann et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2019)

Add to Collection

Article Energy & Fuels

Thermal and Fluid Dynamic Behaviors of Confined Slot Jets Impinging on an Isothermal Moving Surface with Nanofluids

Bernardo Buonomo et al.

ENERGIES (2019)

Add to Collection

Article Thermodynamics

Effect of Jet Position on Cooling an Array of Heated Obstacles

Hussein M. Maghrabie et al.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2018)

Add to Collection

Article Thermodynamics

Heat transfer and entropy generation analysis of a protruded surface in presence of a cross-flow jet using Al2O3-water nanofluid

Arnab Mukherjee et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)

Add to Collection

Article Thermodynamics

Effects of spent air removal scheme on internal-side heat transfer in an impingement-effusion system at low jet-to-target plate spacing

Prashant Singh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

A numerical investigation and design optimization of impingement cooling system with an array of air jets

Prasanth Anand Kumar Lam et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Effect of crossflow regulation by varying jet diameters in streamwise direction on jet impingement heat transfer under maximum crossflow condition

Yongbin Ji et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Numerical investigation of heat transfer and pressure drop of in-line array of heated obstacles cooled by jet impingement in cross-flow

Hussein M. Maghrabie et al.

ALEXANDRIA ENGINEERING JOURNAL (2017)

Add to Collection

Article Thermodynamics

Influence of the nozzle shape on heat transfer uniformity for in-line array of impinging air jets

M. Attalla et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Numerical investigations of heat transfer and pressure drop characteristics in multiple jet impingement system

Prithvi Sai Penumadu et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

A numerical investigation of dimple effects on internal heat transfer enhancement of a double wall cooling structure with jet impingement

Lei Luo et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2016)

Add to Collection

Article Thermodynamics

A numerical investigation of heat transfer and entropy generation during jet impingement cooling of protruding heat sources without and with porous medium

Prasanth Anand Kumar Lam et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Add to Collection

Article Thermodynamics

Computational parametric study of an impinging jet in a cross-flow configuration for electronics cooling applications

Gorka S. Larraona et al.

APPLIED THERMAL ENGINEERING (2013)

Add to Collection

Article Thermodynamics

Jet impingement heat transfer on target surfaces with longitudinal and transverse grooves

Yao-Hsien Liu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Thermodynamics

Experimental study of the turbulent flow around a single wall-mounted cube exposed to a cross-flow and an impinging jet

Yunesky Masip et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2012)

Add to Collection

Article Engineering, Mechanical

INFLUENCE OF PITCH ON LOCAL HEAT TRANSFER DISTRIBUTION FOR CONFINED IMPINGEMENT OF MULTIPLE JET ARRAYS

Santosh V. Prabhu et al.

JOURNAL OF ENHANCED HEAT TRANSFER (2011)

Add to Collection

Article Thermodynamics

Experimental investigation of impingement heat transfer on a flat and dimpled plate with different crossflow schemes

Yunfei Xing et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Thermodynamics

Calculation of jet's inlet temperature for plate temperature control in an impinging jet cooling problem

Wen-Lih Chen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Thermodynamics

Experimental and Numerical Investigation of Heat Transfer Characteristics of Inline and Staggered Arrays of Impinging Jets

Yunfei Xing et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)

Add to Collection

Article Thermodynamics

Large-eddy simulation of an impinging jet in a cross-flow on a heated wall-mounted cube

D. Rundstrom et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Add to Collection

Article Thermodynamics

Vortices and heat flux around a wall-mounted cube cooled simultaneously by a jet and a crossflow

M. Popovac et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Add to Collection

Article Thermodynamics

Investigation of Heat Transfer and Pressure Drop of an Impinging Jet in a Cross-Flow for Cooling of a Heated Cube

D. Rundstrom et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2008)

Add to Collection

Article Thermodynamics

Large-eddy simulations of flow over a jet-impinged wall-mounted cube in a cross stream

M. Popovac et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2007)

Add to Collection

Article Thermodynamics

Air cooling characteristics of a uniform square modules array for electronic device heat sink

MM Mohamed

APPLIED THERMAL ENGINEERING (2006)

Add to Collection

Article Thermodynamics

Impingement cooling in a rib-roughened channel with cross-flow

RG Jia et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.