☆ 4.1 Review

A Narrative Review on Wearable Inertial Sensors for Human Motion Tracking in Industrial Scenarios

ROBOTICS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Fusing and refining convolutional neural network models for assembly action recognition in smart manufacturing

Md. Al-Amin et al.

Summary: Assembly plays a crucial role in manufacturing, and supporting workers in real time to maximize their contributions is a major focus for manufacturers. Recognizing and understanding worker actions through human action recognition can provide real-time assistance and facilitate worker-machine collaboration. However, recognizing assembly actions is challenging due to their complexity and variability. This paper proposes a method that uses two wearable devices to capture inertial measurement unit data from each hand of assembly workers. Two convolutional neural network models are trained independently to recognize right-hand and left-hand actions, and their classification results are fused to obtain a final action recognition result. The proposed approach effectively improves prediction accuracy at both the action level and the subject level, as demonstrated in the study.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Chemistry, Analytical

Validation of an Embedded Motion-Capture and EMG Setup for the Analysis of Musculoskeletal Disorder Risks during Manhole Cover Handling

Remy Hubaut et al.

Summary: Musculoskeletal disorders are a growing problem in European workplaces. This study evaluates the use of inertial measurement units (IMU) in the workplace and compares them to a reference system. Results show good agreement between IMU and VICON systems for angle measurements. EMG and VAS are both valuable means to assess effort during tasks.

SENSORS (2022)

Add to Collection

Article Multidisciplinary Sciences

Musculoskeletal modelling and simulation of oil palm fresh fruit bunch harvesting

Yon Sin Chan et al.

Summary: This study aims to create and evaluate a musculoskeletal model of oil palm harvesting motion, assessing the associated risk of Musculoskeletal Disorder (MSD). The primary muscles relied on during harvesting were found to be the longissimus, iliocostalis, and rectus abdominis. Harvesters were at higher risk of MSD during back flexion and back rotation.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Engineering, Industrial

K-score: A novel scoring system to quantify fatigue-related ergonomic risk based on joint angle measurements via wearable inertial measurement units

Karla Beltran Martinez et al.

Summary: Work-related musculoskeletal disorders are a global problem affecting millions of people. This study investigated fatigue detection using measured body motion and proposed a novel kinematic score (K-score) and Rapid Entire Body Assessment (REBA). Unlike REBA, K-score showed a significant correlation with electromyography signal amplitude, making it a useful tool for detecting fatigue-induced changes in body motion.

APPLIED ERGONOMICS (2022)

Add to Collection

Article Robotics

Human motion quality and accuracy measuring method for human-robot physical interactions

Tadele Belay Tuli et al.

Summary: This article introduces a novel approach for measuring human motion quality and accuracy in human-robot collaboration. The study conducted in a laboratory environment showed that the deviation of human wrist motion from the robot's baseline motion can be up to 3 cm in 40 cycle operations. This method helps to understand the quality of human motion behaviors and can be applied to various applications involving human-robot shared workplaces.

INTELLIGENT SERVICE ROBOTICS (2022)

Add to Collection

Article Computer Science, Information Systems

Posture Risk Assessment in an Automotive Assembly Line Using Inertial Sensors

Maria Lua Nunes et al.

Summary: Musculoskeletal disorders (MSD) are a prevalent work-related health issue, and hazardous postures pose a risk to their development. This study developed an inertial sensor-based approach to evaluate posture in industrial contexts, and found that traditional posture risk assessment tools do not consider posture risk differences among different operators.

IEEE ACCESS (2022)

Add to Collection

Proceedings Paper Computer Science, Theory & Methods

Real-time estimation of upper limbs kinematics with IMUs during typical industrial gestures

Elisa Digo et al.

Summary: This study validated an IMU-based method for real-time estimation of upper limb kinematics during typical gestures required for industrial assembly tasks. Through the use of IMUs fixed on the upper body of six participants, shoulder and elbow angles were successfully assessed. The results confirmed the suitability of the proposed method for human-robot collaboration in an industrial context.

3RD INTERNATIONAL CONFERENCE ON INDUSTRY 4.0 AND SMART MANUFACTURING (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Robust human position estimation in cooperative robotic cells

Antonio Amorim et al.

Summary: The paper proposes a combined system merging 3D vision sensor human tracking with pose estimation from IMUs to improve intuitiveness and safety in human-robot interaction. Experimental results show that the method can accurately capture human position with precision and robustness to occlusions.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Engineering, Industrial

Comparing upper arm and trunk kinematics between manufacturing workers performing predominantly cyclic and non-cyclic work tasks

Mark C. Schall et al.

Summary: The study compared the levels of posture and movement speed exposure between manufacturing workers primarily performing cyclic and non-cyclic tasks, and explored exposure variance patterns within and between workers in each group. Results showed significantly higher movement speeds for workers performing predominantly cyclic tasks and greater exposure variability within the non-cyclic group.

APPLIED ERGONOMICS (2021)

Add to Collection

Article Chemistry, Analytical

Stochastic-Biomechanic Modeling and Recognition of Human Movement Primitives, in Industry, Using Wearables

Brenda Elizabeth Olivas-Padilla et al.

Summary: This study uses inertial sensors to calculate joint angles, model the dynamics of professional movements and joint collaboration for in-depth ergonomic analysis. By predicting workers' posture with these models and identifying the joints contributing to the motion, it aims to prevent ergonomic risks effectively.

SENSORS (2021)

Add to Collection

Article Chemistry, Analytical

Analysis of the Accuracy of Ten Algorithms for Orientation Estimation Using Inertial and Magnetic Sensing under Optimal Conditions: One Size Does Not Fit All

Marco Caruso et al.

Summary: The study aimed to analyze the accuracy of ten sensor fusion algorithms (SFAs) and found that parameter values must be specifically set according to the experimental scenario to avoid errors. When optimally tuned, no statistically significant differences were observed among the different SFAs in all tested experimental scenarios, with absolute errors ranging from 3.8 degrees to 7.1 degrees.

SENSORS (2021)

Add to Collection

Article Chemistry, Analytical

A Wearable IMU System for Flexible Teleoperation of a Collaborative Industrial Robot

Gasper Skulj et al.

Summary: This study introduces a novel wireless wearable system that uses IMUs to determine the orientation of the operator's upper body parts and control the movement of an industrial collaborative robot. The algorithm includes a calibration procedure and transformation of the operator's hand motions to the robot's end effector movement, taking into account the operator's orientation. Experimental results demonstrate that the developed system is intuitive, allows for flexible control, and is robust for industrial collaborative robot applications.

SENSORS (2021)

Add to Collection

Article Public, Environmental & Occupational Health

Digitalization of Musculoskeletal Risk Assessment in a Robotic-Assisted Assembly Workstation

Ana Colim et al.

Summary: This study investigates musculoskeletal risk assessment before and after the implementation of robots in an assembly workstation, highlighting the importance of using novel technologies. The results demonstrate that robotic-assisted assembly can reduce musculoskeletal risk, with significant improvement in wrist posture during robotic-assisted tasks.

SAFETY (2021)

Add to Collection

Proceedings Paper Computer Science, Artificial Intelligence

Ergowear: an ambulatory, non-intrusive, and interoperable system towards a Human-aware Human-robot Collaborative framework

Andre Resende et al.

Summary: This paper presents the design and development of Ergowear, a wearable upper body inertial Motion Capture system, inspired by industry 5.0 paradigm and Human-robot collaboration (HRC) technology. The system aims to make robots aware of human intentions and states, achieving human-awareness, and has been tested to meet technical requirements, showing promise for integration within a Human-aware HRC framework.

2021 IEEE INTERNATIONAL CONFERENCE ON AUTONOMOUS ROBOT SYSTEMS AND COMPETITIONS (ICARSC) (2021)

Add to Collection

Article Computer Science, Information Systems

Instrumented Ergonomic Risk Assessment Using Wearable Inertial Measurement Units: Impact of Joint Angle Convention

Ahmed Humadi et al.

Summary: The study aimed to investigate the accuracy and repeatability of an inertial measurement unit (IMU) system for in-field RULA score assessment and compared it with reference values obtained by a motion-capture camera system. Experimental results showed that the 2D convention had significantly smaller root-mean-square error (RMSE) for trunk and neck joint angles, while the 3D convention had moderate agreement with the reference system. The wearable IMU system, along with the 2D convention, could be considered as an accurate and repeatable ergonomic risk assessment tool.

IEEE ACCESS (2021)

Add to Collection

Article Robotics

Investigating Joint-Action in Short-Cycle Repetitive Handover Tasks: The Role of Giver Versus Receiver and its Implications for Human-Robot Collaborative System Design

Someshwar Roy et al.

INTERNATIONAL JOURNAL OF SOCIAL ROBOTICS (2020)

Add to Collection

Article Chemistry, Analytical

Wearable Sensor Network for Biomechanical Overload Assessment in Manual Material Handling

Paolo Giannini et al.

SENSORS (2020)

Add to Collection

Article Environmental Sciences

Development and Validation of a Wearable Inertial Sensors-Based Automated System for Assessing Work-Related Musculoskeletal Disorders in the Workspace

Chunxi Huang et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2020)

Add to Collection

Proceedings Paper Engineering, Biomedical

Explaining the Ergonomic Assessment of Human Movement in Industrial Contexts

Sara Santos et al.

PROCEEDINGS OF THE 13TH INTERNATIONAL JOINT CONFERENCE ON BIOMEDICAL ENGINEERING SYSTEMS AND TECHNOLOGIES, VOL 4: BIOSIGNALS (2020)

Add to Collection

Article Robotics

Collection and Analysis of Human Upper Limbs Motion Features for Collaborative Robotic Applications

Elisa Digo et al.

ROBOTICS (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Controlling Object Hand-Over in Human-Robot Collaboration Via Natural Wearable Sensing

Weitian Wang et al.

IEEE TRANSACTIONS ON HUMAN-MACHINE SYSTEMS (2019)

Add to Collection

Article Robotics

Human movement and ergonomics: An industry-oriented dataset for collaborative robotics

Pauline Maurice et al.

INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH (2019)

Add to Collection

Article Engineering, Industrial

Ergonomic evaluation of the musculoskeletal risks in a banana harvesting activity through qualitative and quantitative measures, with emphasis on motion capture (Xsens) and EMG

Giselle Merino et al.

INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS (2019)

Add to Collection

Proceedings Paper Automation & Control Systems

Fast human motion prediction for human-robot collaboration with wearable interface

Stefano Tortora et al.

PROCEEDINGS OF THE IEEE 2019 9TH INTERNATIONAL CONFERENCE ON CYBERNETICS AND INTELLIGENT SYSTEMS (CIS) ROBOTICS, AUTOMATION AND MECHATRONICS (RAM) (CIS & RAM 2019) (2019)

Add to Collection

Article Engineering, Manufacturing

A study to trial the use of inertial non-optical motion capture for ergonomic analysis of manufacturing work

Sarah R. Fletcher et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2018)

Add to Collection

Article Automation & Control Systems

Survey on human-robot collaboration in industrial settings: Safety, intuitive interfaces and applications

Valeria Villani et al.

MECHATRONICS (2018)

Add to Collection

Article Automation & Control Systems

Self-contained optical-inertial motion capturing for assembly planning in digital factory

Wei Fang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

On a human-robot workplace design and task allocation system

Panagiota Tsarouchi et al.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2017)

Add to Collection

Article Construction & Building Technology

Wearable IMU-based real-time motion warning system for construction workers' musculoskeletal disorders prevention

Xuzhong Yan et al.

AUTOMATION IN CONSTRUCTION (2017)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Human-robot interaction review and challenges on task planning and programming

Panagiota Tsarouchi et al.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2016)

Add to Collection

Article Engineering, Industrial

(WMSDs issue) A novel wearable system for the online assessment of risk for biomechanical load in repetitive efforts

L. Peppoloni et al.

INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS (2016)

Add to Collection

Article Chemistry, Analytical

Dealing with Magnetic Disturbances in Human Motion Capture: A Survey of Techniques

Gabriele Ligorio et al.

MICROMACHINES (2016)

Add to Collection

© Peeref 2019-2024. All rights reserved.