☆ 4.4 Article

Ecofriendly Protic Ionic Liquid Lubricants for Ti6Al4V

LUBRICANTS (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Investigation of energy losses of the internal combustion engine taking into account the correlation of the hydrophobic and hydrophilic

Piotr Wroblewski

Summary: This paper presents the results of measurements of motor torque for 18 multilayer AlN/CrN and CrN/AlN coatings. It shows that highly hydrophilic coatings can reduce the loss of mechanical energy in the lower engine speed range and in the oil environment with a high soot content, while highly hydrophobic coatings enable the reduction of torque and resistance to movement in higher speed ranges. The influence of these properties is more significant than the surface texture, hardness, Young's modulus, and other parameters of the coatings.

ENERGY (2023)

Add to Collection

Article Chemistry, Physical

Physicochemical characterisation of graphene-ammonium lactate ionic liquid nanofluid

Pablo Manuel Martinez-Rubio et al.

Summary: A new series of nanofluids based on graphene dispersed in 2-hydroxyethylammonium lactate (ML) ionic liquid was developed. The concentration of graphene and temperature showed significant effects on the viscoelastic behavior and conductivity of the nanofluids. The viscosity unexpectedly decreased with a low concentration of graphene, while shear thinning effects appeared with higher concentrations. The complex Burgers model was used to describe the creep-recovery behavior of the nanofluid with 1 wt% of graphene.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Chemistry, Physical

The effect of chemical structure on the tribological performance of perfluorosulfonate ILs as lubricants for Ti-6Al-4V tribopairs

Mingjin Fan et al.

Summary: The study found that tetraalkyl phosphonium perfluorosulfonate ionic liquids have superior lubricating properties on Ti-6A1-4V tribopairs, with physically adsorbed films playing a key role in improving tribological properties.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Engineering, Mechanical

Tribological behavior of ammonium-based protic ionic liquid as lubricant additive

Hong Guo et al.

Summary: The study investigated the tribological behavior of an ammonium-based protic ionic liquid as an additive in a mineral oil, revealing improved friction performance and reduced wear volume. Microscopic and surface analysis confirmed changes in surface interactions between the rubbing components.

FRICTION (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Recent advances on high performance machining of aerospace materials and composites using vegetable oil-based metal working fluids

K. C. Wickramasinghe et al.

Summary: This paper provides a comprehensive analysis of how to improve the machinability of difficult-to-cut advanced aerospace materials and composites, aiming to meet the aerospace industry's demand for high-performance sustainable machining to achieve reasonable profits, and discusses vegetable oil-based metalworking fluid, health and environmental conscious machining, and the future perspective on biodegradable metalworking fluids. It also proposes sustainable and cleaner production methods involving occupational health and safety, minimal waste generation, and elimination of environmental pollution, while critically reviewing the tribological properties of vegetable oil-based metalworking fluids on difficult-to-cut materials.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Mechanical

Corrosion and lubrication properties of a halogen-free Gemini room-temperature ionic liquid for titanium alloys

Chaoyang Zhang et al.

Summary: The newly designed Gemini ionic liquid has high kinematic viscosity, low friction coefficient, and high anti-wear properties, while negligibly corroding the metal.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Tribological properties of 1-octyl-3-methylimidazolium lactate ionic liquid as a lubricant additive

Shangshang Li et al.

Summary: This study investigated the tribological properties of IL L-L108 as an additive to SAE 10W-40 and PEG400 for steel-steel contacts. The results showed that the lubricating performance was improved when L-L108 was used as an additive, with XPS analysis indicating a tribochemical reaction between the mixture and metal substrate. This reaction formed a chemical reaction film on the steel surface, contributing to the excellent tribological performance observed.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Applied

Lubrication by Adsorption Films of Hydrophilic Amine-based Protic Ionic Liquids: Effect of Anion Species

Kotaro Kaneko et al.

Summary: This study synthesized hydrophilic amine-based protic ionic liquids and evaluated their lubrication performance in aqueous solutions, with ditriethanolamine malate showing the lowest kinetic friction coefficient and stable lubrication capability over sliding cycles. Characterization of PILs adsorption on an iron oxide surface using quartz crystal microbalance with dissipation monitoring and force curve data provided insights for their potential applications as water-soluble lubricants and additives in metal surface treatments.

JOURNAL OF OLEO SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Towards superior lubricity and anticorrosion performances of proton-type ionic liquids additives for water-based lubricating fluids

Rui Dong et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

Effect of Amines on the Lubricity of Castor Oil-Sulfated Sodium Salt Solution for Titanium Alloys

Ye Yang et al.

TRIBOLOGY LETTERS (2020)

Add to Collection

Review Green & Sustainable Science & Technology

A review on recent development of minimum quantity lubrication for sustainable machining

N. N. Nor Hamran et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Mechanical

Exploration of graphene assisted vegetables oil based minimum quantity lubrication for surface grinding of TI-6AL-4V-ELI

Harpinder Singh et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Engineering, Mechanical

Energy conservation and environmental sustainability during grinding operation of Ti-6Al-4V alloys via eco-friendly oil/graphene nano additive and Minimum quantity lubrication

Ahmed Mohamed Mahmoud Ibrahim et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Study on the enhanced tribological performance for titanium alloys by PEG oil/Zn-nanoparticles

Xin Quan et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection

Review Biochemistry & Molecular Biology

Industrial Applications of Ionic Liquids

Adam J. Greer et al.

MOLECULES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Ionic liquid lubricants: when chemistry meets tribology

Meirong Cai et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Parameter optimization during minimum quantity lubrication milling of TC4 alloy with graphene-dispersed vegetable-oil-based cutting fluid

Ming Li et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Engineering, Chemical

Lubricity and Adsorption of Castor Oil Sulfated Sodium Salt Emulsion Solution on Titanium Alloy

Ye Yang et al.

TRIBOLOGY LETTERS (2019)

Add to Collection

Article Engineering, Mechanical

Tool wear processes in low frequency vibration assisted drilling of CFRP/Ti6Al4V stacks with forced air-cooling

Chao Li et al.

WEAR (2019)

Add to Collection

Article Engineering, Industrial

Quantitative analysis of cooling and lubricating effects of graphene oxide nanofluids in machining titanium alloy Ti6Al4V

Guangxian Li et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Mechanical

Ionic liquids as oil additives for lubricating oxygen-diffusion case-hardened titanium

Haitao Duan et al.

TRIBOLOGY INTERNATIONAL (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Tuning nanofluids for improved lubrication performance in turning biomedical grade titanium alloy

Saadman Sakib Rahman et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Toxicology

Cytotoxic effect of protic ionic liquids in HepG2 and HaCat human cells: in vitro and in silico studies

Bruna Varela Zanoni et al.

TOXICOLOGY RESEARCH (2019)

Add to Collection

Article Engineering, Mechanical

Study of the Lubricating Ability of Protic Ionic Liquid on an Aluminum-Steel Contact

Akshar Patel et al.

LUBRICANTS (2018)

Add to Collection

Article Engineering, Mechanical

Tribological properties of titanium alloys under lubrication of SEE oil and aqueous solutions

Ye Yang et al.

TRIBOLOGY INTERNATIONAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Sustainable Cotton Dyeing in Nonaqueous Medium Applying Protic Ionic Liquids

Rebecca S. Andrade et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Chemistry, Organic

Investigation of the rheological properties of protic ionic liquids

Danillo Camargo et al.

JOURNAL OF PHYSICAL ORGANIC CHEMISTRY (2016)

Add to Collection

Article Engineering, Mechanical

Analysis of tribochemical decomposition of two imidazolium ionic liquids on Ti-6Al-4V through Mechanically Stimulated Gas Emission Spectrometry

R. Nevshupa et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Improvement of tribological and anti-corrosive performance of titanium surfaces coated with dicationic imidazolium-based ionic liquids

Izabelle M. Gindri et al.

RSC ADVANCES (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Protic Ionic Liquids: Evolving Structure-Property Relationships and Expanding Applications

Tamar L. Greaves et al.

CHEMICAL REVIEWS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation on wear characteristics of a titanium alloy/steel tribo-pair

K. M. Chen et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Engineering, Chemical

Ultra-Low Friction with a Protic Ionic Liquid Boundary Film at the Water-Lubricated Sapphire-Stainless Steel Interface

Tulia Espinosa et al.

TRIBOLOGY LETTERS (2014)

Add to Collection

Article Engineering, Mechanical

Tribological performance of Nano-Tin as lubrication additives used in steel-copper tribo-pair

Yun-hui Mo et al.

INDUSTRIAL LUBRICATION AND TRIBOLOGY (2011)

Add to Collection

Article Engineering, Environmental

Bronsted ionic liquids: Study of physico-chemical properties and catalytic activity in aldol condensations

M. Iglesias et al.

CHEMICAL ENGINEERING JOURNAL (2010)

Add to Collection

Article Thermodynamics

Bronsted Ionic Liquids for Sustainable Processes: Synthesis and Physical Properties

Victor H. Alvarez et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2010)

Add to Collection

Article Engineering, Chemical

Ionic Liquids as Lubricants of Titanium-Steel Contact. Part 3. Ti6Al4V Lubricated with Imidazolium Ionic Liquids with Different Alkyl Chain Lengths

A. E. Jimenez et al.

TRIBOLOGY LETTERS (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.