Natural Rubber Composites Reinforced with Green Silica from Rice Husk: Effect of Filler Loading on Mechanical Properties

Natural rubber (NR) composites filled with silica are typically used for tire tread applications owing to their low energy consumption and low rolling resistance. Tire tread properties vary broadly depending on the compound formulation and curing conditions. Silica loading is recognized as a critical factor influencing the mechanical properties of the composites. In this work, we aim to investigate the effect of silica loading (10-50 phr) on the mechanical properties of NR composites. Silica was prepared from rice husk waste via chemical treatment and subsequent calcination at 600 degrees C. Prior to the compound mixing process, silica was modified by a silane coupling agent to improve compatibility with the NR matrix. The NR compounds reinforced with silane-modified silica from rice husk were prepared using a two-roll mill machine. The scorch and cure times increased as the silica loading increased. The mechanical properties of the NR composites, including tensile strength, elongation at break, modulus, hardness, and abrasion loss, were examined as a function of silica loading. Tensile strength increased and reached the maximum value at 20 phr but decreased at high loading owing to the agglomeration of silica in the NR matrix. With increasing silica loading, hardness and modulus increased, whereas elongation at break and abrasion resistance decreased slightly. These results indicate that NR composites filled with silica are stiffer and harder at a higher silica loading due to the strong interaction between silica and the NR matrix, inhibiting the segmental mobility of rubber chains. We anticipate that the compound formulation presented in this work could potentially be adapted to tire tread applications.

Automated summary

This study investigated the effect of silica loading on the mechanical properties of natural rubber (NR) composites. Results showed that the tensile strength of NR composites reached its maximum value at 20 phr but decreased at high loading due to silica agglomeration. Hardness and modulus increased with increasing silica loading, while elongation at break and abrasion resistance slightly decreased. These findings suggest that NR composites filled with silica become stiffer and harder at higher silica loading, inhibiting the mobility of rubber chains.