☆ 4.5 Article

Preparation and SO2 capture kinetics of a DeSOx coating for the desulfurization of exhaust emission

HELIYON (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Efficient absorption of low partial pressure SO2 by deep eutectic solvents based on pyridine derivatives

Qiang Wang et al.

Summary: Efficient and reversible absorption of SO2 by a new type of deep eutectic solvents (DESs) synthesized in this study has been achieved, particularly for low concentration SO2. The studied DESs demonstrated superior SO2 absorption performance compared to most DESs and ILs, with the absorption mechanism attributed to the chemical interaction between the pyridine nitrogen atom and SO2.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)

Add to Collection

Article Energy & Fuels

Effect of SCR downsizing and ammonia slip catalyst coating on the emissions from a heavy-duty diesel engine

Yunhua Zhang et al.

Summary: The combination of diesel oxidation catalyst, catalyzed diesel particulate filter and selective catalytic reduction is the most effective way to reduce particulate emissions and nitrogen oxide from diesel engines. Improvements such as ammonia slip catalyst coating and SCR catalyst downsizing also have an impact on NOx conversion efficiency and ammonia slip.

ENERGY REPORTS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

An efficient approach for emission reduction in diesel engine with ferric chloride as catalyst and yttria stabilized zirconia as thermal barrier coating

Chandan Kumar Sethi et al.

Summary: This study investigated the combustion and emission characteristics of yttria stabilized zirconia in a diesel engine by adding ferric chloride and steam injection. The results showed that adding ferric chloride can reduce emissions of nitrogen oxide, carbon monoxide, hydrocarbons, and smoke opacity, demonstrating significant environmental impact.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Engineering, Chemical

Kinetics of Ca(OH)2 decomposition in pure Ca(OH)2 and Ca(OH)2-CaTiO3 composite pellets for application in thermochemical energy storage system

Aman Gupta et al.

Summary: The study aims to enhance the reaction rate of Ca(OH)(2) decomposition by adding an inert agent. Addition of CaTiO3 significantly increases the kinetic parameters, leading to an increase in the reaction rate.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Review Chemistry, Applied

Review on recent advances in adsorptive desulfurization

Biswajit Saha et al.

Summary: ADS is gaining attention as a low-cost desulfurization technique for petroleum fuels, utilizing adsorbents to remove sulfur compounds. The latest developments focus on enhancing selectivity, stability, reusability, and performance improvement through the incorporation of metals. Selectivity is a key challenge in ADS, and testing with real feedstocks is crucial for commercial application.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

The effect of particle size on removal of SO2 from flue gas by MgO absorbents

Mengxi Zhao et al.

Summary: MgO nanofluids show better desulfurization effect in wet desulfurization process compared to MgO slurry by improving desulfurization efficiency. The density and viscosity of MgO nanofluids increase with concentration, but decrease with temperature. Properly reducing particle size can enhance the desulfurization efficiency of MgO absorbent in removing SO2 from flue gas.

POWDER TECHNOLOGY (2021)

Add to Collection

Article Environmental Sciences

Study on the role of copper converter slag in simultaneously removing SO2 and NOx using KMnO4/copper converter slag slurry

Jiacheng Bao et al.

Summary: A novel wet process using KMnO4/copper converter slag slurry for simultaneously removing SO2 and NOx from acid-making tail gas was proposed. Leached metal ions, such as Al3+, Cu2+, and Mg2+ from copper slag, played a crucial role in the absorption of SO2 and NOx, with a synergistic effect on NOx removal. Fe2+ had an inhibitory effect on NOx removal due to the reaction with KMnO4.

JOURNAL OF ENVIRONMENTAL SCIENCES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of Doped Alkali Metal Ions on the SO2 Capture Performance of MnO2 Desulfurization Materials at Low Temperature

Xing Li et al.

Summary: In this study, MnO2 was modified with various alkali metal ions to enhance its SO2 capture performance. The MnO2 composite doped with LiOH (2.0 mol/L) showed the best SO2 capture capacity, which was 18% higher than that of pure MnO2. The type and concentration of alkali metal ions doped into MnO2 had varying effects on its SO2 capture performance.

JOURNAL OF RENEWABLE MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Preparation and desulfurization performance of various MnOx materials for ship exhaust emissions control

Xing Li et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

Preparation of various manganese dioxide composites and their desulfurization performance

Xing Li et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

Add to Collection

Article Multidisciplinary Sciences

Biochar production from palm oil mill residues and application of the biochar to adsorb carbon dioxide

Archw Promraksa et al.

HELIYON (2020)

Add to Collection

Article Multidisciplinary Sciences

Structures, mechanical properties and antibacterial activity of Ag/TiO2 nanocomposite materials synthesized via HVPG technique for coating application

Muhammad Akhsin Muflikhun et al.

HELIYON (2019)

Add to Collection

Article Environmental Sciences

Employing a novel nanocatalyst (Mn/Iranian hematite) for oxidation of SO2 pollutant in aqueous environment

A. Shokri et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Review Engineering, Chemical

Research progress in the SO2 resistance of the catalysts for selective catalytic reduction of NOx

Minhua Zhang et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2017)

Add to Collection

Article Chemistry, Physical

Synthesis of Cu-Ce/KIT-6 materials for SOx removal

Pierrick Gaudin et al.

APPLIED CATALYSIS A-GENERAL (2015)

Add to Collection

Article Engineering, Chemical

Removal of sulfur dioxide from diesel exhaust gases by using dry desulfurization MnO2 filter

Yugo Osaka et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Ceramics

Synthesis, characterization, and evaluation of TiMgAlCu mixed oxides as novel SOx removal catalysts

BaoShuo Li et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Review Chemistry, Applied

Adsorption of SOx by oxide materials: A review

Yannick Mathieu et al.

FUEL PROCESSING TECHNOLOGY (2013)

Add to Collection

Article Chemistry, Applied

Mesoporous materials for the removal of SO2 from gas streams

Yannick Mathieu et al.

FUEL PROCESSING TECHNOLOGY (2012)

Add to Collection

Article Environmental Sciences

Short-term association between sulfur dioxide and daily mortality: The Public Health and Air Pollution in Asia (PAPA) study

Haidong Kan et al.

ENVIRONMENTAL RESEARCH (2010)

Add to Collection

Review Green & Sustainable Science & Technology

High quality biodiesel and its diesel engine application: A review

I. M. Atadashi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)

Add to Collection

Article Toxicology

Sensory and pulmonary effects of acute exposure to sulfur dioxide (SO2)

Christoph van Thriel et al.

TOXICOLOGY LETTERS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Sulfation behavior of CuO/γ-Al2O3 sorbent for the removal of SO2 from flue gas

Qingchun Yu et al.

JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.