Related references
Note: Only part of the references are listed.A review on the durability performance of alkali-activated binders subjected to chloride-bearing environment
Babatunde Abiodun Salami et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Effect of ferrosilicon and silica fume on mechanical, durability, and microstructure characteristics of ultra high-performance concrete
Mohamed Amin et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Strain Hardening of Polypropylene Microfiber Reinforced Composite Based on Alkali-Activated Slag Matrix
Olga M. Smirnova et al.
MATERIALS (2022)
Effects of nanomaterials on mechanical properties, durability characteristics and microstructural features of alkali-activated binders: A comprehensive review
Faris Matalkah et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Using artificial neural networks for predicting mechanical and radiation shielding properties of different nano-concretes exposed to elevated temperature
Alaa A. El-Sayed et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Crack self-healing in alkali-activated slag composites incorporating immobilized bacteria
Lei Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Experimental study and theoretical prediction of mechanical properties of ultra-high-performance concrete incorporated with nanorice husk ash burning at different temperature treatments
Sahar A. Mostafa et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)
Durability Enhancement of Sustainable Concrete Composites Comprising Waste Metalized Film Food Packaging Fibers and Palm Oil Fuel Ash
Rayed Alyousef et al.
SUSTAINABILITY (2022)
Acid resistance of alkali-activated binders: A review of performance, mechanisms of deterioration and testing procedures
Timothy A. Aiken et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Effect of combined activator of Ca(OH)2 and Na2CO3 on workability and compressive strength of alkali-activated ferronickel slag system
Zuwang Bian et al.
CEMENT & CONCRETE COMPOSITES (2021)
Efficiency of natural pozzolans, ground glasses and coal bottom ashes in mitigating sulfate attack and alkali-silica reaction
Mahipal Kasaniya et al.
CEMENT AND CONCRETE RESEARCH (2021)
Effects of nano cotton stalk and palm leaf ashes on ultrahigh-performance concrete properties incorporating recycled concrete aggregates
Mohamed Amin et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Concrete Based on Clinker-Free Cement: Selecting the Functional Unit for Environmental Assessment
Olga Smirnova et al.
SUSTAINABILITY (2021)
An overview of factors influencing the properties of alkali-activated binders
Mohammed Ibrahim et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Does a National Innovation System Encourage Sustainability? Lessons from the Construction Industry in Serbia
Marija Mosurovic Ruzicic et al.
SUSTAINABILITY (2021)
Influence of different curing methods on mechanical and durability properties of alkali activated binders
V. S. Athira et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
One-step random-walk process of nanoparticles in cement-based materials
Ali Bahari et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2021)
Strength, microstructure, efflorescence behavior and environmental impacts of waste glass geopolymers cured at ambient temperature
Rui Xiao et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Rheological Properties of Cemented Paste Backfill with Alkali-Activated Slag
Yunpeng Kou et al.
MINERALS (2020)
A review on alkali-activated binders: Materials composition and fresh properties of concrete
Md Manjur A. Elahi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Preparation, physico-mechanical characteristics and durability of eco-alkali-activated binder from blast-furnace slag, cement kiln-by-pass dust and microsilica ternary system
Mohamed Heikal et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of using mineral admixtures and ceramic wastes as coarse aggregates on properties of ultrahigh-performance concrete
Mohamed Amin et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Effect of slag, silica fume, and metakaolin on properties and performance of alkali-activated fly ash cured at ambient temperature
Hani Alanazi et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate
Jianhe Xie et al.
COMPOSITES PART B-ENGINEERING (2019)
Evaluation of alkali-activated mortars containing high volume waste ceramic powder and fly ash replacing GBFS
Ghasan Fahim Huseien et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Properties of ceramic tile waste based alkali-activated mortars incorporating GBFS and fly ash
Ghasan Fahim Huseien et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Fresh and hardened properties of palm oil clinker lightweight aggregate concrete incorporating Nano-palm oil fuel ash
Hussein M. Hamada et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Recent advances in alkaline cement binders: A review
M. H. Samarakoon et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Effect of MgO on chloride penetration resistance of alkali-activated binder
H. N. Yoon et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature
Guohao Fang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Use of waste glass in alkali activated cement mortar
Jian-Xin Lu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Compressive strength and microstructure analysis of geopolymer paste using waste glass powder and fly ash
Tawatchai Tho-In et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Sustainable geopolymer concrete using ground granulated blast furnace slag and rice husk ash: Strength and permeability properties
Ankur Mehta et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Setting, Strength, and Autogenous Shrinkage of Alkali-Activated Fly Ash and Slag Pastes: Effect of Slag Content
Marija Nedeljkovic et al.
MATERIALS (2018)
Effect of metakaolin replaced granulated blast furnace slag on fresh and early strength properties of geopolymer mortar
Ghasan F. Huseien et al.
AIN SHAMS ENGINEERING JOURNAL (2018)
Calorimetric study of geopolymer binders based on natural pozzolan
Ebrahim Najafi Kani et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)
Exploratory Investigation into a Chemically Activated Fly Ash Binder for Mortars
Gang Xu et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)
Effects of Ultrafine Fly Ash on Setting, Strength, and Porosity of Geopolymers Cured at Room Temperature
Partha Sarathi Deb et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)
Development of Ultrafine Slag-Based Geopolymer Mortar for Use as Repairing Mortar
Sulaem Musaddiq Laskar et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)
Geopolymers obtained from bottom ash as source of aluminosilicate cured at room temperature
Rozineide A. Antunes Boca Santa et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Preparation and tests for workability, compressive and bond strength of ultra-fine slag based geopolymer as concrete repairing agent
Sulaem Musaddiq Laskar et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Resistance of alkali-activated binders to organic acid attack: Assessment of evaluation criteria and damage mechanisms
Andreas Koenig et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effect of alkali-activated metakaolin cement on compressive strength of mortars
Kornnika Wianglor et al.
APPLIED CLAY SCIENCE (2017)
Influence of source materials and the role of oxide composition on the performance of ternary blended sustainable geopolymer mortar
Afia Sharmin et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Thermomechanical properties of particle-reinforced geopolymer composite with various aggregate gradation of fine ceramic filler
Tomas Kovarik et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Structural performance of nano-silica modified fly-ash based geopolymer concrete
Dibyendu Adak et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Mechanical strength, surface abrasion resistance and microstructure of fly ash-metakaolin-sepiolite geopolymer composites
Bing Yan et al.
CERAMICS INTERNATIONAL (2017)
Performance of blended metakaolin/blastfurnace slag alkali-activated mortars
Paulo H. R. Borges et al.
CEMENT & CONCRETE COMPOSITES (2016)
Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete
F. N. Okoye et al.
CERAMICS INTERNATIONAL (2016)
The effect of curing on the properties of metakaolin and fly ash-based geopolymer paste
Gokhan Gorhan et al.
COMPOSITES PART B-ENGINEERING (2016)
Characterization of mechanical and electric properties of geopolymers synthesized using four locally available fly ashes
Shixin Zeng et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm-oil fuel ash
Ghasan Fahim Huseien et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Thermal behavior and mechanical properties of geopolymer mortar after exposure to elevated temperatures
Hai Yan Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Development of geopolymer mortar under ambient temperature for in situ applications
Mohammed Haloob Al-Majidi et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effects of adding nano-TiO2 on compressive strength, drying shrinkage, carbonation and microstructure of fluidized bed fly ash based geopolymer paste
Ping Duan et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Mechanical properties of alkali-activated concrete: A state-of-the-art review
Yao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete
Michael Yong Jing Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Improvement of the early and final compressive strength of fly ash-based geopolymer concrete at ambient conditions
Lateef Assi et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
A sustainable calcined water treatment sludge and rice husk ash geopolymer
Ekkasit Nimwinya et al.
JOURNAL OF CLEANER PRODUCTION (2016)
A mix design procedure for geopolymer concrete with fly ash
P. Pavithra et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Design and performance evaluation of ultra-lightweight geopolymer concrete
D. M. A. Huiskes et al.
MATERIALS & DESIGN (2016)
Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature
Pradip Nath et al.
CEMENT & CONCRETE COMPOSITES (2015)
Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature
Tianyu Xie et al.
CERAMICS INTERNATIONAL (2015)
Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends
N. Marjanovic et al.
CERAMICS INTERNATIONAL (2015)
Development of high strength alkali activated binder using palm oil fuel ash and GGBS at ambient temperature
Moslih Amer Salih et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Very high strength (120 MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration
C. D. Atis et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Durability of mortar and concrete containing alkali-activated binder with pozzolans: A review
M. M. Hossain et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Preparation and characterization of a hybrid alkaline binder based on a fly ash with no commercial value
Johanna M. Mejia et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Shrinkage Characteristics of Alkali-Activated Slag Cements
Christopher Cartwright et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)
Effect of Silicon Carbide Nano Dispersion on the Mechanical and Nano Structural Properties of Cement
A. Bahari et al.
NATIONAL ACADEMY SCIENCE LETTERS-INDIA (2015)
Evidence of a Fractal Percolating Network During Geopolymerization
Julien Rouyer et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)
Studying the effect of thermal and acid exposure on alkali-activated slag geopolymer
H. M. Khater
ADVANCES IN CEMENT RESEARCH (2014)
Effect of nano-silica on strength and durability of fly ash based geopolymer mortar
D. Adak et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures
Navid Ranjbar et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
Pradip Nath et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer
Behzad Nematollahi et al.
MATERIALS & DESIGN (2014)
Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive
Saengsuree Pangdaeng et al.
MATERIALS & DESIGN (2014)
The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature
Partha Sarathi Deb et al.
MATERIALS & DESIGN (2014)
Strength and Durability Performance of Alkali-Activated Rice Husk Ash Geopolymer Mortar
Yun Yong Kim et al.
TheScientificWorldJOURNAL (2014)
On the Utilization of Pozzolanic Wastes as an Alternative Resource of Cement
Md. Rezaul Karim et al.
MATERIALS (2014)
Effects of alkali solutions on corrosion durability
Faiz U. A. Shaikh
ADVANCES IN CONCRETE CONSTRUCTION (2014)
Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation
Susan A. Bernal et al.
CEMENT AND CONCRETE RESEARCH (2013)
Fabrication of a non-cement binder using slag, palm oil fuel ash and rice husk ash with sodium hydroxide
M. R. Karim et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Thermal stability of a silica-rich vanadium tailing based geopolymer
Xiangke Jiao et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Examination of Chloride-Induced Corrosion in Reinforced Geopolymer Concretes
Kunal Kupwade-Patil et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)
Alteration in the Microstructure of Fly Ash Geopolymers Upon Exposure to Elevated Temperatures
Omar A. Abdulkareem et al.
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS (ICOSM 2013) (2013)
X-ray microtomography shows pore structure and tortuosity in alkali-activated binders
John L. Provis et al.
CEMENT AND CONCRETE RESEARCH (2012)
Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends
Susan A. Bernal et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
The effect of microwave incinerated rice husk ash on the compressive and bond strength of fly ash based geopolymer concrete
Andri Kusbiantoro et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems
Prinya Chindaprasirt et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Corrosion of Reinforcing Bars Embedded in Alkali-activated Slag Concrete Subjected to Chloride Attack
William Aperador Chaparro et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2012)
The effect of sodium silicate and sodium hydroxide on the strength of aggregates made from coal fly ash using the geopolymerisation method
Hamzah Fansuri et al.
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2012)
Geopolymer as well cement and the variation of its mechanical behavior with curing temperature
Mohamed M. C. Nasvi et al.
GREENHOUSE GASES-SCIENCE AND TECHNOLOGY (2012)
Evolution of binder structure in sodium silicate-activated slag-metakaolin blends
Susan A. Bernal et al.
CEMENT & CONCRETE COMPOSITES (2011)
Use of mineral admixtures for enhanced resistance against sulfate attack
H. N. Atahan et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load
Alaa M. Rashad et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Kiatsuda Somna et al.
FUEL (2011)
Dielectric properties and temperature profile of fly ash-based geopolymer mortar
Saysunee Jumrat et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2011)
Magnesia Modification of Alkali-Activated Slag Fly Ash Cement
Shen Weiguo et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2011)
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Daniel L. Y. Kong et al.
CEMENT AND CONCRETE RESEARCH (2010)
Pore solution composition and alkali diffusion in inorganic polymer cement
Redmond R. Lloyd et al.
CEMENT AND CONCRETE RESEARCH (2010)
Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags
Susan A. Bernal et al.
CEMENT AND CONCRETE RESEARCH (2010)
A review: The comparison between alkali-activated slag (Si plus Ca) and metakaolin (Si plus Al) cements
Chao Li et al.
CEMENT AND CONCRETE RESEARCH (2010)
Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer
Sanjay Kumar et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete
J. Wongpa et al.
MATERIALS & DESIGN (2010)
Chemical Research and Climate Change as Drivers in the Commercial Adoption of Alkali Activated Materials
Jannie S. J. van Deventer et al.
WASTE AND BIOMASS VALORIZATION (2010)
Steel corrosion behaviour in carbonated alkali-activated slag concrete
W. Aperador et al.
CORROSION SCIENCE (2009)
Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature
J. Temuujin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Minimum cement content requirements: a must or a myth?
R. Wassermann et al.
MATERIALS AND STRUCTURES (2009)
Drying and autogenous shrinkage of pastes and mortars with activated slag cement
Antonio A. Melo Neto et al.
CEMENT AND CONCRETE RESEARCH (2008)
Durability of concrete incorporating GGBS activated by water-glass
Saud Al-Otaibi
CONSTRUCTION AND BUILDING MATERIALS (2008)
Alkali-activated binders: A review - Part 1. Historical background, terminology, reaction mechanisms and hydration products
Fernando Pacheco-Torgal et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
A study on the passive state stability of steel embedded in activated fly ash mortars
D. M. Bastidas et al.
CORROSION SCIENCE (2008)
Developing the circular economy in China: Challenges and opportunities for achieving 'leapfrog development'
Yong Geng et al.
INTERNATIONAL JOURNAL OF SUSTAINABLE DEVELOPMENT AND WORLD ECOLOGY (2008)
Designing Precursors for Geopolymer Cements
Peter Duxson et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Workability and strength of coarse high calcium fly ash geopolymer
P. Chindaprasirt et al.
CEMENT & CONCRETE COMPOSITES (2007)
Effect of carbonation on alkali-activated slag paste
M. Palacios et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Carbonation process of alkali-activated slag mortars
F. Puertas et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Corrosion resistance in activated fly ash mortars
JM Miranda et al.
CEMENT AND CONCRETE RESEARCH (2005)
Durability of geopolymer materials in sodium and magnesium sulfate solutions
T Bakharev
CEMENT AND CONCRETE RESEARCH (2005)
Metakaolin as a main cement constituent. Exploitation of poor Greek kaolins
E Badoglannis et al.
CEMENT & CONCRETE COMPOSITES (2005)
Effects of gypsum and phosphoric acid on the properties of sodium silicate-based alkali-activated slag pastes
JJ Chang et al.
CEMENT & CONCRETE COMPOSITES (2005)
Effect of mixing proportions of concrete on its electrical conductivity and the rapid chloride permeability test (ASTM C1202 or ASSHTO T277) results
CJ Shi
CEMENT AND CONCRETE RESEARCH (2004)
Resistance of alkali-activated slag concrete to acid attack
T Bakharev et al.
CEMENT AND CONCRETE RESEARCH (2003)
Modeling carbonation for corrosion risk prediction of concrete structures
A Steffens et al.
CEMENT AND CONCRETE RESEARCH (2002)
Effect of pore size distribution on drying shrinkage of alkali-activated slag concrete
F Collins et al.
CEMENT AND CONCRETE RESEARCH (2000)