4.5 Article

Narrow-Linewidth Diffraction-Limited Tapered Er-Doped Fiber Amplifier with 2 mJ Pulse Energy

Related references

Note: Only part of the references are listed.
Article Engineering, Electrical & Electronic

High-Energy Single-Frequency Core-Pumped Er-Doped Fiber Amplifiers

Leonid V. V. Kotov et al.

Summary: In this study, high-energy single frequency transform-limited Er-doped amplifiers were pumped by a specially developed Yb-doped fiber laser at 980 nm and a Raman laser at 1480 nm. It was found that pumping at 1480 nm allows achieving slightly higher maximum pulse energy for long pulses in the absence of nonlinear effects. On the other hand, amplifiers with a pump at 980 nm have a higher threshold of stimulated Brillouin scattering (SBS), enabling higher peak power of shorter pulses. Lasers with more than 730 mu J pulse energy and with higher than 3.5 kW peak power were demonstrated.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2023)

Article Optics

Scaling of average power in sub-MW peak power Yb-doped tapered fiber picosecond pulse amplifiers

Konstantin Bobkov et al.

Summary: This study investigates the potential for average power scaling of sub-MW output peak power picosecond fiber lasers using a Yb-doped tapered fiber in the final amplification stage. Experimental results demonstrate the feasibility of achieving high power output with low levels of high order modes in the output radiation.

OPTICS EXPRESS (2021)

Article Optics

An Eye-Safe, SBS-Free Coherent Fiber Laser LIDAR Transmitter with Millijoule Energy and High Average Power

Mehmetcan Akbulut et al.

Summary: In this report, an eye-safe and high average power fiber laser with millijoule energy output is discussed. The optimization of NP phosphate-glass fibers led to SBS-free operation with kW level peak power and high beam quality. The laser achieved a coherent LIDAR Figure Of Merit (FOM) of 174 mJ*sqrt(Hz), the highest reported value for a fiber laser to date.

PHOTONICS (2021)

Article Engineering, Electrical & Electronic

Optimisation of the efficiency of tapered erbium-doped optical fibre

M. M. Khudyakov et al.

Summary: A cladding pumped tapered erbium-doped fibre with record-high core diameter for erbium-doped fibres and near diffraction-limited beam quality has been developed, achieving a high efficiency (18%) of pump radiation conversion at a wavelength of 976 nm into signal radiation at a wavelength of 1560 nm through optimization of the tapered fibre parameters.

QUANTUM ELECTRONICS (2021)

Article Optics

Er-Doped Tapered Fiber Amplifier for High Peak Power Sub-ns Pulse Amplification

Maksim M. Khudyakov et al.

Summary: The tapered Er-doped fiber amplifier was developed and tested for high peak power pulses amplification, demonstrating single-mode performance and efficient pump-to-signal conversion. Experimental results showed the amplification of 0.9 ns pulses to peak powers above 200 kW with a slope efficiency of 15.6%.

PHOTONICS (2021)

Article Engineering, Electrical & Electronic

3 mJ All-Fiber MOPA With a Short-Length Highly Er3+-Doped Phosphate Fiber

Joshua Olson et al.

IEEE PHOTONICS TECHNOLOGY LETTERS (2020)

Article Engineering, Electrical & Electronic

Tapered erbium-doped fibre laser system delivering 10 MW of peak power

A. Andrianov et al.

QUANTUM ELECTRONICS (2019)

Article Engineering, Electrical & Electronic

High-Brightness Multimode Fiber Lasers for Resonant Pumping

Leonid V. Kotov et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2017)

Article Optics

Millijoule pulse energy 100-nanosecond Er-doped fiber laser

Leonid Kotov et al.

OPTICS LETTERS (2015)

Article Optics

Mode evolution in long tapered fibers with high tapering ratio

Juho Kerttula et al.

OPTICS EXPRESS (2012)

Article Optics

High-energy, in-band pumped erbium doped fiber amplifiers

Ee-Leong Lim et al.

OPTICS EXPRESS (2012)

Article Optics

Double clad tapered fiber for high power applications

V. Filippov et al.

OPTICS EXPRESS (2008)