Undrained vane shear strength of sand-foam mixtures subjected to different shear rates

The shear strength of sand-foam mixtures plays a crucial role in ensuring successful earth pressure balance (EPB) shield tunneling. Since the sand-foam mixtures are constantly sheared by the cutterhead and the screw conveyor with varied rotation speeds during tunneling, it is non-trivial to investigate the effect of shear rates on the undrained shear strength of sand-foam mixtures under chamber pressures to extend the understanding on the tunneling process. This study conducted a series of pressurized vane shear tests to investigate the role of shear rates on the peak and residual strengths of sand-foam mixtures at different pore states. Different from the shear-rate characteristics of natural sands or clay, the results showed that the peak strength of sand-foam mixtures under high vertical total stress (sigma(v) > 200 kPa) and low foam injection ratio (FIR <= ) decreased with the increase in shear rate. Otherwise, the peak strength was not measurably affected by shear rates. The sand-foam mixtures in the residual state resembled low-viscous fluid with yield stress and the residual strength increased slightly with shear rates. In addition, the peak and residual strengths were approximately linear with vertical effective stress regardless of the total stress and FIR. The peak effective internal friction angle remained almost invariant in a low shear rate ((gamma) over dot < 0.25 s(-1)) but decreased when the shear rate continued increasing. The residual effective internal friction angle was lower than the peak counterpart and insensitive to shear rates. This study unveiled the role of shear rates in the undrained shear strength of sand-foam mixtures with various FIRs and vertical total stresses. The findings can extend the understanding of the rate-dependent shear characteristics of conditioned soils and guide the decision-making of soil conditioning schemes in the EPB shield tunneling practice. (C) 2023 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Automated summary

This study investigated the effect of shear rates on the shear strength of sand-foam mixtures. The results showed that under high pressure and low foam injection ratio, increasing shear rates decreased the peak strength of sand-foam mixtures, while the residual strength was not significantly affected by shear rates. Moreover, the peak and residual strengths were approximately linear with vertical effective stress.