☆ 4.7 Article

Gaseous mercury capture using Bi2S3 nanorods decorated ZSM-5 with superior sulfur resistance

SURFACES AND INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Salt-Assisted Synthesis of Rod-Like Bi2S3 Single Crystals for Gas-Phase Elemental Mercury Removal

Jiang Wu et al.

Summary: Rod-like Bi2S3 single crystals obtained via low-temperature molten salt method show efficient Hg-0 capture ability, with annealing temperature and salt dosage affecting the performance. Optimal Hg-0 removal is achieved at 300 degrees C with 20 g of KSCN, with Bi2S3 performing well due to its high binding energy and rod-like structures at temperatures of 100-260 degrees C. SO2 and NO have little impact on mercury removal performance.

ENERGY & FUELS (2022)

Add to Collection

Article Multidisciplinary Sciences

Modulating inherent lewis acidity at the intergrowth interface of mortise-tenon zeolite catalyst

Huiqiu Wang et al.

Summary: By enriching the inherent Lewis acid sites at the interface of a mortise-tenon ZSM-5 catalyst, the lattice mismatch of the intergrown zeolite offers an efficient strategy to design the Lewis acidity in zeolite catalysts, resulting in improved selectivity.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Multidisciplinary Sciences

Bifunctional zeolites-silver catalyst enabled tandem oxidation of formaldehyde at low temperatures

Na Li et al.

Summary: The authors designed a tandem bifunctional zeolites-silver catalyst that significantly improved the activity of formaldehyde oxidation at low temperatures. This finding opens up a new avenue for the development of formaldehyde oxidation technologies and provides guidance for designing efficient catalysts in a series of oxidation reactions.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Experimental Study on the Elemental Mercury Removal Performance and Regeneration Ability of CoOx-FeOx-Modified ZSM-5 Adsorbents

Wei Ma et al.

Summary: In this study, Co-Fe mixed oxide modified ZSM-5 adsorbents were successfully synthesized using the ultrasonic-assisted impregnation method for the capture of elemental mercury. Among the samples, Co4Fe1-ZSM-5 showed the best performance with high removal efficiency and adsorption capacity. The study also investigated the effects of various gas components during the mercury adsorption process.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Chemistry, Physical

Removal of elemental mercury from coal combustion flue gas using bentonite modified with Ce-Fe binary oxides

Mengli Zhou et al.

Summary: This study prepared Ce-Fe binary oxide modified bentonite for mercury removal from flue gas. The modified bentonite showed better removal performance and the removal mechanism was revealed. Furthermore, the deactivated modified bentonite can be effectively regenerated after thermal treatment.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Review Energy & Fuels

Mercury Removal from Flue Gas by Noncarbon Sorbents

Jianping Yang et al.

Summary: Mercury emissions from coal-fired power production pose a significant threat to human health and ecosystems, with activated carbons being the most explored sorbents for mercury removal. However, noncarbon sorbents have been developed as supplementary options due to the limitations of activated carbons. This review summarizes the recent progress on noncarbon sorbents for mercury removal and provides guidance for the design and exploration of new adsorbents.

ENERGY & FUELS (2021)

Add to Collection

Article Energy & Fuels

Capture of elemental mercury from flue gas over a magnetic and sulfur-resistant sorbent prepared from Fe-containing sewage sludge activated with sulfuric acid

Honghu Li et al.

Summary: By pyrolysis and sulfuric acid activation, a magnetic and sulfur-resistant sorbent (FSS-SA) was obtained for capturing elemental mercury from flue gas, showing enhanced Hg0 removal activity. Active oxygen and sulfur species derived from Fe2O3 and ferric polysulfide were found to be the active sites for Hg0 removal.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Gaseous mercury removal using biogenic porous silica modified with potassium bromide

Dongjing Liu et al.

Summary: Porous silica derived from rice husk exhibits good Hg-0 adsorption capability in the temperature range of 60-140 degrees C, with Hg-0 removal efficiency above 80%; the mercury removal performance of RHS can be significantly enhanced by KBr modification.

JOURNAL OF THE ENERGY INSTITUTE (2021)

Add to Collection

Article Energy & Fuels

Defective molybdenum disulfide nanosheet for elemental mercury capture in simulated flue gas

Lingtao Yang et al.

Summary: A defect-rich MoS2 nanosheet was synthesized and applied for adsorptive capture of elemental mercury (Hg-0) in simulated flue gas at low temperature, showing excellent Hg-0 removal performance. The Hg-0 removal efficiency of the defective MoS2 nanosheet was all above 93% within the temperature range of 25-150 degrees C. Mo-4(+), S-2(-), and S-2(2-) ions participated in the Hg-0 removal process.

JOURNAL OF THE ENERGY INSTITUTE (2021)

Add to Collection

Article Engineering, Environmental

Acceleration of Hg0 Adsorption onto Natural Sphalerite by Cu2+ Activation during Flotation: Mechanism and Applications in Hg0 Recovery

Jian Mei et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

Flue Gas Hg0 Removal by FeCl3-Impregnated LTA and MFI Zeolites: Influences of Topology and Cation Sites

Ming Hua et al.

ENERGY & FUELS (2020)

Add to Collection

Article Energy & Fuels

Gaseous mercury removal by graphene-like carbon nitride impregnated with ammonium bromide

Dongjing Liu et al.

FUEL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Low-temperature molten salt synthesis of MoS2@CoS2 heterostructures for efficient hydrogen evolution reaction

Song He et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Article Energy & Fuels

Reductions in Volatile Organic Compound Emissions from Coal-Fired Power Plants by Combining Air Pollution Control Devices and Modified Fly Ash

Jie Cheng et al.

ENERGY & FUELS (2019)

Add to Collection

Article Environmental Sciences

Removal of gaseous elemental mercury by modified diatomite

Huan Liu et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Article Energy & Fuels

Magnetic γ-Fe2O3-Loaded Attapulgite Sorbent for Hg0 Removal in Coal-Fired Flue Gas

Lu Dong et al.

ENERGY & FUELS (2019)

Add to Collection

Article Engineering, Environmental

Study on the effects of oxygen-containing functional groups on Hg0 adsorption in simulated flue gas by XAFS and XPS analysis

Jinjing Luo et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Removal of elemental mercury from simulated flue gas by ZSM-5 modified with Mn-Fe mixed oxides

Zhen Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Energy & Fuels

Density Functional Theory Study of Mercury Adsorption on CuS Surface: Effect of Typical Flue Gas Components

Hailong Li et al.

ENERGY & FUELS (2019)

Add to Collection

Article Energy & Fuels

Recyclable CuS sorbent with large mercury adsorption capacity in the presence of SO2 from non-ferrous metal smelting flue gas

Wei Liu et al.

FUEL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Heterostructured Bi2S3-Bi2O3 Nanosheets with a Built-In Electric Field for Improved Sodium Storage

Wen Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Role of Bronsted acid site during catalytic combustion of methane over PdO/ZSM-5: Dominant or negligible?

Qiguang Dai et al.

JOURNAL OF CATALYSIS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Multiform Sulfur Adsorption Centers and Copper-Terminated Active Sites of Nano-CuS for Efficient Elemental Mercury Capture from Coal Combustion Flue Gas

Zequn Yang et al.

LANGMUIR (2018)

Add to Collection

Article Energy & Fuels

Reemission of elemental mercury and mercury halides in wet flue gas desulfurization

Barna Heidel et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Three-Dimensional WO3 Nanoplate/Bi2S3 Nanorod Heterojunction as a Highly Efficient Photoanode for Improved Photoelectrochemical Water Splitting

Yidan Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Perovskite LaMnO3/ZSM-5 composites for H2S reactive adsorption at high temperature

Dongjing Liu et al.

ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY (2016)

Add to Collection

Article Chemistry, Physical

Adsorption of gas molecules on Cu impurities embedded monolayer MoS2: A first-principles study

B. Zhao et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Engineering, Environmental

Development of Nano-Sulfide Sorbent for Efficient Removal of Elemental Mercury from Coal Combustion Fuel Gas

Hailong Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Add to Collection

Article Energy & Fuels

La2CuO4/ZSM-5 sorbents for high-temperature desulphurization

Dongjing Liu et al.

FUEL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

CeO2-La2O3/ZSM-5 sorbents for high-temperature H2S removal

Dongjing Liu et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2016)

Add to Collection

Article Chemistry, Physical

Facile large scale synthesis of Bi2S3 nano rods-graphene composite for photocatalytic photoelectrochemical and supercapacitor application

S. Vadivel et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Engineering, Environmental

Updated Emission Inventories for Speciated Atmospheric Mercury from Anthropogenic Sources in China

Lei Zhang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of c-Axis Oriented ZSM-5 Hollow Fibers Based on an in Situ Solid-Solid Transformation Mechanism

Kui Shen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Applied

Polyaniline and its composites with zeolite ZSM-5 for efficient removal of glyphosate from aqueous solution

Maja Milojevic-Rakic et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2013)

Add to Collection

Article Energy & Fuels

Analysis of mercury species present during coal combustion by thermal desorption

M. Antonia Lopez-Anton et al.

FUEL (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Magnetic Multi-Functional Nano Composites for Environmental Applications

Jie Dong et al.

ADVANCED FUNCTIONAL MATERIALS (2009)

Add to Collection

Article Engineering, Environmental

The adsorptive capacity of vapor-phase mercury chloride onto powdered activated carbon derived from waste tires

Hsun-Yu Lin et al.

JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION (2006)

Add to Collection

Review Engineering, Environmental

Survey of catalysts for oxidation of mercury in flue gas

Albert A. Presto et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2006)

Add to Collection

Article Engineering, Environmental

Development of cost-effective noncarbon sorbents for Hg0 removal from coal-fired power plants

JY Lee et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2006)

Add to Collection

Article Engineering, Environmental

Control of mercury emissions from coal-fired in electric utility boilers

RK Srivastava et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2006)

Add to Collection

Article Chemistry, Applied

Characterization of aluminosilicate zeolites by UV Raman spectroscopy

Y Yu et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.