☆ 4.7 Article

Vacuum co-evaporated wide-bandgap perovskite films for highly-efficient indoor photovoltaic cells and modules

SURFACES AND INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Dual Additive for Simultaneous Improvement of Photovoltaic Performance and Stability of Perovskite Solar Cell

In Seok Yang et al.

Summary: Additive engineering is an efficient approach for improving photovoltaic performance and phase stability of formamidinium-based perovskite, with a dual additive strategy of mixing MACl and CsCl proving successful in enhancing open-circuit voltage Voc, reducing trap density, and increasing resistance against charge recombination. The best power conversion efficiency achieved with the dual additive is 23.22%, outperforming single additive strategies using MACl or CsCl.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

CsCl-induced defect control of CsPbI2Br thin films for achieving open-circuit voltage of 1.33 V in all-inorganic perovskite solar cells

In Su Jin et al.

Summary: The optimization of alpha-CsPbI2Br morphology with low defect density and large grain size through the addition of cesium chloride (CsCl) improves the energy loss challenge in all-inorganic perovskite solar cells (PSCs). The CsPbI2Br film grown with CsCl exhibits high crystallinity and largely-grained morphology, leading to reduced defect density and enhanced stability. The CsCl-employed device shows improved efficiency and stability, making it applicable for both indoor and outdoor environments.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Efficient Wide-Bandgap Mixed-Cation and Mixed-Halide Perovskite Solar Cells by Vacuum Deposition

Lidon Gil-Escrig et al.

Summary: The vacuum deposition method is increasingly used for preparing perovskite films and devices with multilayer structures at low temperatures. Wide-bandgap perovskites with tunable bandgaps can be prepared using a four-source vacuum deposition process, leading to high efficiency solar cells with promising stability. Solar cells based on a 1.75 eV bandgap perovskite show efficiency up to 16.8% and maintain 90% of the initial efficiency after 2 weeks of operation.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

From Groundwork to Efficient Solar Cells: On the Importance of the Substrate Material in Co-Evaporated Perovskite Solar Cells

Tobias Abzieher et al.

Summary: The study investigates the impact of substrate material selection on co-evaporated perovskite thin films in vacuum processes, highlighting the significant influence on film morphology and incorporation of organic compounds. A selection guide for efficient co-evaporated perovskite thin films is derived, along with a proposed basic crystallization model for co-evaporated perovskite thin films based on insights into film formation on different substrate materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

40.1% Record Low-Light Solar-Cell Efficiency by Holistic Trap-Passivation using Micrometer-Thick Perovskite Film

Xilai He et al.

Summary: Perovskite solar cells show high efficiency in both full sunlight and low-light conditions, with a record efficiency of 40.1% achieved under warm LED light. A holistic passivation strategy reduces trap states in both surface and bulk of the perovskite film, resulting in increased charge carrier lifetimes and decreased nonradiative recombination loss. This work paves the way for high-performance, self-powered IoT devices.

ADVANCED MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Hysteresis-free perovskite solar cells with compact and nanoparticle NiO for indoor application

Danila Saranin et al.

Summary: The study demonstrates efficient low-light perovskite solar cells can be achieved using NiO as a hole transporting material. Compact NiO devices exhibit higher power density, while nanoparticle NiO offers advantages in low-temperature processing and scalability for larger areas.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Perovskite indoor photovoltaics: opportunity and challenges

Kai-Li Wang et al.

Summary: Perovskite photovoltaics show advantages for indoor applications, but there is limited research in this area. Compared to other types of indoor photovoltaic devices, perovskite devices offer better performance and lower costs.

CHEMICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-throughput large-area vacuum deposition for high-performance formamidine-based perovskite solar cells

Jiangshan Feng et al.

Summary: An efficient vacuum deposition approach for perovskite solar cells has been developed, enabling the fabrication of high-quality films on glass and flexible substrates. The optimization of in-vacuum annealing temperature can significantly improve the efficiency of PSCs to 21.32%, the highest value achieved through vacuum deposition, with excellent long-term stability in a solvent-free and air-free environment.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Indoor photovoltaics, The Next Big Trend in solution-processed solar cells

Benxuan Li et al.

Summary: Indoor photovoltaic technology is attracting widespread attention for its potential to power small and portable electronic and photonic devices, with recent advancements significantly reducing power consumption for IoT electronics. Third-generation solution-processed solar cell technologies, such as organic solar cells, dye-sensitized solar cells, perovskite solar cells, and colloidal quantum dot indoor solar cells, are the focus of recent developments. Challenges and prospects for IPV development are also discussed, aiming to enhance future design and performance.

INFOMAT (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Realizing Stable Artificial Photon Energy Harvesting Based on Perovskite Solar Cells for Diverse Applications

Haoxuan Sun et al.

SMALL (2020)

Add to Collection

Article Chemistry, Physical

Control over Crystal Size in Vapor Deposited Metal-Halide Perovskite Films

Kilian B. Lohmann et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Unprecedentedly high indoor performance (efficiency > 34 %) of perovskite photovoltaics with controlled bromine doping

Ju Won Lim et al.

NANO ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Co-Evaporated p-i-n Perovskite Solar Cells beyond 20% Efficiency: Impact of Substrate Temperature and Hole-Transport Layer

Marcel Ross et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Organic Photovoltaic Cells for Indoor Applications: Opportunities and Challenges

Yong Cui et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Multisource Vacuum Deposition of Methylammonium-Free Perovskite Solar Cells

Yu-Hsien Chiang et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Energy & Fuels

Dye-sensitized solar cells (DSSCs) as a potential photovoltaic technology for the self-powered internet of things (IoTs) applications

Asad Aslam et al.

SOLAR ENERGY (2020)

Add to Collection

Article Chemistry, Physical

From 33% to 57% - an elevated potential of efficiency limit for indoor photovoltaics

Johnny Ka Wai Ho et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Powered Sensors Enabled by Wide-Bandgap Perovskite Indoor Photovoltaic Cells

Ian Mathews et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Technology and Market Perspective for Indoor Photovoltaic Cells

Ian Mathews et al.

JOULE (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Advances in the development of power supplies for the Internet of Everything

Xiayue Fan et al.

INFOMAT (2019)

Add to Collection

Article Chemistry, Physical

Highly efficient perovskite solar cells for light harvesting under indoor illumination via solution processed SnO2/MgO composite electron transport layers

Janardan Dagar et al.

NANO ENERGY (2018)

Add to Collection

Article Computer Science, Information Systems

BLE Beacons for Internet of Things Applications: Survey, Challenges, and Opportunities

Kang Eun Jeon et al.

IEEE INTERNET OF THINGS JOURNAL (2018)

Add to Collection

Article Chemistry, Physical

Large-Area, Highly Uniform Evaporated Formamidinium Lead Triiodide Thin Films for Solar Cells

Juliane Borchert et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Multidisciplinary Sciences

Substrate-dependent electronic structure and film formation of MAPbI3 perovskites

Selina Olthof et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Planar-Structure Perovskite Solar Cells with Efficiency beyond 21%

Qi Jiang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Mesoporous perovskite solar cells and the role of nanoscale compact layers for remarkable all-round high efficiency under both indoor and outdoor illumination

F. Di Giacomo et al.

NANO ENERGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Efficient luminescent solar cells based on tailored mixed-cation perovskites

Dongqin Bi et al.

SCIENCE ADVANCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of semi-transparent perovskite films with centimeter-scale superior uniformity by the hybrid deposition method

Luis K. Ono et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Multidisciplinary Sciences

Efficient planar heterojunction perovskite solar cells by vapour deposition

Mingzhen Liu et al.

NATURE (2013)

Add to Collection

Article Energy & Fuels

Maximum Efficiencies of Indoor Photovoltaic Devices

Monika Freunek (Mueller) et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.