☆ 4.7 Article

Frictional sliding of infilled planar granite fracture under oscillating normal stress

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

A new multi-function servo control dynamic shear apparatus for geomechanics

Wengang Dang et al.

Summary: The DJZ-500 is a versatile servo-controlled dynamic shear test apparatus with both dynamic and static loading modules for force and displacement servo control experiments in various directions. It is capable of executing custom waveforms to study seismic response and frictional properties of geomaterials.

MEASUREMENT (2022)

Add to Collection

Article Mining & Mineral Processing

Prediction of landslide displacement with dynamic features using intelligent approaches

Yonggang Zhang et al.

Summary: This paper proposes a dynamic way to predict landslide displacement based on the GRU neural network and CEEMDAN, and demonstrates its accuracy improvement over SVM in periodic displacement prediction through a case study. The dynamic predictive method significantly enhances accuracy by capturing the dynamic features of the inputs to optimize landslide displacement prediction.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Mining & Mineral Processing

Experimental and numerical studies on progressive debonding of grouted rock bolts

Hao Shi et al.

Summary: Understanding the progressive debonding mechanism of bolts is crucial for underground safety. This paper conducted laboratory experiments and numerical simulations of pull-out tests. The relationship between the pull-out strength of the bolt and the uniaxial compressive strength of the cement mortar material was established, and the locations of cracks were identified using the acoustic emission technique. The results revealed that the axial displacement of the cement mortar material at the peak load was approximately 5 mm, and the peak load of the bolt increased with the strength of the confining medium.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Mining & Mineral Processing

Review of preventive and constructive measures for coal mine explosions: An Indian perspective

Santosh Kumar Ray et al.

International Journal of Mining Science and Technology (2022)

Add to Collection

Article Engineering, Geological

Frictional behavior of planar and rough granite fractures subjected to normal load oscillations of different amplitudes

Wengang Dang et al.

Summary: In this study, direct shear tests were conducted on saw-cut and natural granite fractures using a dynamic shear box. It was found that shear forces and normal displacements exhibited periodic changes and time shifts with oscillated normal loads. Small/large normal load oscillation amplitudes enhanced/reduced the peak shear strength, with a critical point.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2022)

Add to Collection

Article Geochemistry & Geophysics

The stabilizing effect of high pore-fluid pressure along subduction megathrust faults: Evidence from friction experiments on accretionary sediments from the Nankai Trough

John D. Bedford et al.

Summary: Pore-fluid pressure plays a crucial role in controlling fault mechanics by lowering the effective normal stress and influencing fault slip behavior. Experiments on accretionary sediments from the Nankai Trough subduction zone show that increased pore-fluid pressure can enhance frictional stability, which has implications for promoting slow slip or aseismic creep in subduction zones. These findings suggest that pore-fluid pressure may have a stabilizing effect on fault behavior and seismic activity in subduction zones.

EARTH AND PLANETARY SCIENCE LETTERS (2021)

Add to Collection

Article Engineering, Geological

Frictional behavior of granular materials exposed to dynamic normal load

Wengang Dang et al.

Summary: The study found that the shear strength and normal displacement of granular materials under dynamic normal load vary with changes in the normal load, with the peak shear stress decreasing with increasing normal load frequency and shear velocity. Additionally, dynamic normal load can both enhance and reduce the shear strength and normal displacement of granular materials.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Multidisciplinary Sciences

A process-based approach to understanding and managing triggered seismicity

Bradford H. Hager et al.

Summary: The article discusses a multidisciplinary approach to managing triggered seismicity using detailed subsurface information to calibrate geomechanical and earthquake source physics models. By applying this method in the seismically active Val d'Agri oil field, successful management of triggered seismicity was demonstrated. Applying this approach elsewhere could help in managing and mitigating seismic activity.

NATURE (2021)

Add to Collection

Article Engineering, Geological

Evaluation of Shear Strength Parameters of Rocks by Preset Angle Shear, Direct Shear and Triaxial Compression Tests

Fengqiang Gong et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Add to Collection

Article Mechanics

Influence of cyclic normal stress on shear friction of EGS granite fractures

Mao Sheng et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Oscillations in sliding with dry friction. Friction reduction by imposing synchronised normal load oscillations

Elena Pasternak et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2020)

Add to Collection

Article Geochemistry & Geophysics

The Role of Mineral Composition on the Frictional and Stability Properties of Powdered Reservoir Rocks

Fengshou Zhang et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2019)

Add to Collection

Article Geochemistry & Geophysics

Fault Reactivation During Fluid Pressure Oscillations: Transition From Stable to Unstable Slip

Corentin Noel et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2019)

Add to Collection

Article Geochemistry & Geophysics

The geophysics, geology and mechanics of slow fault slip

Roland Burgmann

EARTH AND PLANETARY SCIENCE LETTERS (2018)

Add to Collection

Article Construction & Building Technology

Velocity-frequency-amplitude-dependent frictional resistance of planar joints under dynamic normal load (DNL) conditions

Wengang Dang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

Add to Collection

Article Mining & Mineral Processing

Degradation of a discrete infilled joint shear strength subjected to repeated blast-induced vibrations

Siamaki Ali et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Review Geochemistry & Geophysics

Large earthquakes and creeping faults

Ruth A. Harris

REVIEWS OF GEOPHYSICS (2017)

Add to Collection

Article Geochemistry & Geophysics

Rock friction under variable normal stress

Brian Kilgore et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2017)

Add to Collection

Article Geochemistry & Geophysics

Tidal triggering of earthquakes suggests poroelastic behavior on the San Andreas Fault

Andrew A. Delorey et al.

EARTH AND PLANETARY SCIENCE LETTERS (2017)

Add to Collection

Article Geochemistry & Geophysics

Optimizing Event Detection and Location in Low-Seismicity Zones: Case Study from Western Switzerland

Naomi Vouillamoz et al.

BULLETIN OF THE SEISMOLOGICAL SOCIETY OF AMERICA (2016)

Add to Collection

Article Engineering, Geological

Rotation and stress changes on a plane joint during direct shear tests

Wengang Dang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

Add to Collection

Article Geochemistry & Geophysics

Mechanical behavior and microstructure of simulated calcite fault gouge sheared at 20-600°C: Implications for natural faults in limestones

Berend A. Verberne et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2015)

Add to Collection

Article Geochemistry & Geophysics

Effects of healing on the seismogenic potential of carbonate fault rocks: Experiments on samples from the Longmenshan Fault, Sichuan, China

Jianye Chen et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2015)

Add to Collection

Article Geochemistry & Geophysics

Frictional behavior of simulated biotite fault gouge under hydrothermal conditions

Zhen Lu et al.

TECTONOPHYSICS (2014)

Add to Collection

Article Multidisciplinary Sciences

Earthquake triggering and large-scale geologic storage of carbon dioxide

Mark D. Zoback et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)

Add to Collection

Article Multidisciplinary Sciences

Low strength of deep San Andreas fault gouge from SAFOD core

David A. Lockner et al.

NATURE (2011)

Add to Collection

Article Geochemistry & Geophysics

Effects of normal stress perturbations on the frictional properties of simulated faults

TC Hong et al.

GEOCHEMISTRY GEOPHYSICS GEOSYSTEMS (2005)

Add to Collection

Article Geochemistry & Geophysics

Effects of normal stress variation on the strength and stability of creeping faults

MS Boettcher et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2004)

Add to Collection

Article Geochemistry & Geophysics

Effect of humidity on granular friction at room temperature

KM Frye et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2002)

Add to Collection

Article Geochemistry & Geophysics

Frictional response induced by time-dependent fluctuations of the normal loading

H Perfettini et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2001)

Add to Collection

Article Geosciences, Multidisciplinary

Periodic loading on a creeping fault: Implications for tides

H Perfettini et al.

GEOPHYSICAL RESEARCH LETTERS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.