☆ 4.7 Article

Heat and mass transfer analysis of non-Newtonian power-law nanofluid confined within annulus enclosure using Darcy-Brinkman-Forchheimer model

CASE STUDIES IN THERMAL ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Laboratory study and field application of amphiphilic molybdenum disulfide nanosheets for enhanced oil recovery

Ming Qu et al.

Summary: Spherical nanoparticles have been widely studied for enhanced oil recovery, but there is a lack of research on nanosheets. In this study, amphiphilic molybdenum disulfide nanosheets were synthesized and shown to have significant effects on solid surface wettability and emulsion stability at ultra-low concentrations.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Heat transfer of granular flow around aligned tube bank in moving bed: Experimental study and theoretical prediction by thermal resistance model

Zhigang Guo et al.

Summary: This study investigated the heat transfer mechanism of granular flow in moving bed heat exchangers. It was found that the heat transfer coefficients are sensitive to the flow rate in slow granular flow, with smooth flow and particle mixing improving heat transfer, while local particle lagging worsening heat transfer.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Thermodynamics

Numerical analysis of MHD nanofluid flow and heat transfer in a circular porous medium containing a Cassini oval under the influence of the Lorentz and buoyancy forces

Bahram Jalili et al.

Summary: This study investigates the flow characteristics and heat transfer performance of magnetohydrodynamics (MHD) nanofluid in an innovative porous, circle-shaped enclosure. The results show that the volume fraction of nanoparticles, inclined angle, Lorentz, and buoyancy forces significantly affect the MHD nanofluid flow.

HEAT TRANSFER (2022)

Add to Collection

Article Engineering, Multidisciplinary

Non-Newtonian nanofluid natural convective heat transfer in an inclined Half-annulus porous enclosure using FEM

Abderrahmane Aissa et al.

Summary: In this paper, the MHD free convection flow of non-Newtonian nanoliquid inside a halved annulus enclosure considering a constant heat flux is analyzed using the finite element method. The effects of different parameters on the flow behavior and heat transfer performance are investigated.

ALEXANDRIA ENGINEERING JOURNAL (2022)

Add to Collection

Article Thermodynamics

Novel usage of the curved rectangular fin on the heat transfer of a double-pipe heat exchanger with a nanofluid

Bahram Jalili et al.

Summary: This study investigates the convection heat transfer in a countercurrent double-tube heat exchanger with various fins, comparing the performance with simple and rectangular-finned geometries. The results show that the water-aluminum oxide nanofluid has a better convection heat transfer coefficient than water-titanium dioxide and pure water. Heat exchangers with rectangular and curved fins have significantly better efficiency than the heat exchanger without a fin.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection

Article Engineering, Industrial

Application of Experimental Design in Optimizing Fuel Station Queuing System

Ngakan Ketut Acwin Dwijendra et al.

Summary: This research develops a model to optimize the performance of fuel stations by combining simulations and experimental design techniques, considering both queue length and sales rate.

INDUSTRIAL ENGINEERING AND MANAGEMENT SYSTEMS (2022)

Add to Collection

Article Thermodynamics

Experimental investigation on heat transfer performance based on average thermal-resistance ratio for supercritical carbon dioxide in asymmetric airfoil-fin printed circuit heat exchanger

Hongliang Chang et al.

Summary: The study investigates the performance of an asymmetric airfoil-fin heat exchanger in a supercritical carbon dioxide and water experimental system. The average thermal-resistance ratio is more sensitive in evaluating the heat transfer performance, reverse flow increases pressure drop without improving heat transfer, while forward flow slightly enhances heat transfer performance at different temperatures.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Experimental study on heat transfer performance of sCO2 near pseudo-critical point in airfoil-fin PCHE from viewpoint of average thermal-resistance ratio

Hongliang Chang et al.

Summary: This paper proposes and tests a novel type of printed circuit heat exchanger (PCHE) with airfoil fins. The effect of thermal resistance variation on heat transfer performance near the pseudo-critical point is analyzed. A non-dimensional factor is used to evaluate the heat transfer performance, and a working condition analysis method based on the non-dimensional factor and average thermal-resistance ratio is suggested.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Thermal analysis of Williamson fluid flow with Lorentz force on the stretching plate

Bahram Jalili et al.

Summary: This study focuses on the problem of inclined Lorentz force and variable viscosity in Williamson nanofluid on a stretching plate. By using appropriate transformations, the PDEs are transformed into nonlinear odes, and computational solutions are obtained through a semi-analytical method. The results demonstrate a decrease in heat transfer rate and temperature with increasing Pr number and thermophoresis parameter.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection

Article Multidisciplinary Sciences

Statistical modeling and investigation of thermal characteristics of a new nanofluid containing cerium oxide powder

Behrooz Ruhani et al.

Summary: This paper extracted the thermal conductivity of cerium oxide/ethylene glycol nanofluid for different temperatures and volume fractions of nanoparticles, and predicted it using Artificial Neural Network (ANN) and fitting method. The experiments showed an increase in the thermal conductivity ratio of the nanofluid with increasing volume fraction and temperature. It was observed that the rate of increase in thermal conductivity at high temperatures is higher than at low temperatures. The ANN proved to be highly effective in predicting the thermal behavior of the nanofluid.

HELIYON (2022)

Add to Collection

Article Thermodynamics

Numerical study on the effects of geometrical parameters and Reynolds number on the heat transfer behavior of carboxy-methyl cellulose/CuO non-Newtonian nanofluid inside a rectangular microchannel

Mehdi Miansari et al.

Summary: This study investigated the effects of microchannel height and Reynolds number on a non-Newtonian nanofluid, finding that increasing channel height and Reynolds number can reduce temperature but increase heat transfer rate and Nusselt number.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Physics, Multidisciplinary

Effect of magnetic and boundary parameters on flow characteristics analysis of micropolar ferrofluid through the shrinking sheet with effective thermal conductivity

Bahram Jalili et al.

Summary: This study investigates the characteristics of ferrofluid over a shrinking sheet with an effective thermal conductivity model. The magnetic and boundary parameters were found to have the same impact on velocity, while the micro-rotation parameter did not affect velocity. Comparison with other researchers' results shows the impressive accuracy and efficiency of the methods used in this study.

CHINESE JOURNAL OF PHYSICS (2021)

Add to Collection

Article Thermodynamics

Graphene-silver alloyed quantum dots nanofluid: Synthesis and application in the cooling of a simulated electronic system

Vishnuprasad Selvaraj et al.

Summary: In this study, graphene-silver alloyed quantum dots were synthesized using an In-situ hydrothermal method to create nanofluid suspensions for cooling electronic systems. The nanofluid showed enhanced thermal conductivity and heat transfer capabilities, making it a promising coolant for heat-generating electronic systems.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Experimental investigations to evaluate surfactant role on absorption capacity of nanofluid for CO2 utilization in sustainable crude mobilization

Krishna Raghav Chaturvedi et al.

Summary: The utilization of CO2 for oilfield applications is affected by viscous fingering, which can be controlled by injecting CO2 with high viscous nanofluid. Adding a surfactant to the nanofluid further improves CO2 absorption and retention capacity. Experiments show that the combination of surfactant and nanofluid can enhance oil recovery and reduce water cut in porous media.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Efficacy of a novel graphene quantum dots nanofluid in a microchannel heat exchanger

Mohammad Jamshidmofid et al.

Summary: The study focuses on the utilization of graphene quantum dots nanofluid in microchannel heat exchangers. It is found that using nanofluid significantly improves heat transfer rate at Reynolds numbers of 50 and 100 with only a slight increase in pressure drop, while at Reynolds numbers of 150 and 200, a large pressure drop is imposed when using the nanofluid.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Flow and heat transfer behavior of hybrid nanofluid through microchannel with two different channels

R. Vinoth et al.

Summary: The study compared the heat transfer performance of pentagonal and triangular channel oblique finned microchannel heat sinks using different nanofluids, with results showing that the pentagonal channel heat sink performed better in heat transfer and increased pressure drop when using hybrid nanofluid.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

A CFD study on thermohydraulic characteristics of a nanofluid in a shell-and-tube heat exchanger fitted with new unilateral ladder type helical baffles

Mehdi Bahiraei et al.

Summary: The present study investigates the thermohydraulic characteristics and performance index for nanofluids with various particle shapes in a shell and tube heat exchanger, finding that nanofluids with platelet and OS additives demonstrate the best performance in terms of heat transfer rate, overall coefficient, effectiveness, NTU, and performance index. The study also highlights the significant impact of different particle shapes on heat transfer performance and flow patterns in the shell side of the heat exchanger.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Experimental investigation on thermo-hydraulic performance of water-based fly ash-Cu hybrid nanofluid flow in a pipe at various inlet fluid temperatures

Praveen Kumar Kanti et al.

Summary: This study evaluated the convective heat transfer characteristics of hybrid nanofluids flowing through a copper tube, showing that the thermal conductivity, viscosity, and heat transfer rate of the hybrid nanofluid are higher compared to water and fly ash nanofluid. Correlations were developed to evaluate the Nusselt number and friction factor of the hybrid nanofluid based on experimental data.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Experimental Study on the Effect of Nanoparticle Migration on the Convective Heat Transfer Coefficient of EG/Water-based Al2O3 Nanofluids

Tae Jong Choi et al.

Summary: This paper investigates the effect of nanoparticle migration on convective heat transfer characteristics of EG/water-based Al2O3 nanofluids. The results show that the convective heat transfer coefficients of the nanofluids vary depending on the N-BT values, leading to either an increase or decrease in heat transfer efficiency.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Experimental investigation of heat transfer enhancement using ionic liquid-Al2O3 hybrid nanofluid in a cylindrical microchannel heat sink

Amir Heidarshenas et al.

Summary: Recent research focuses on the preparation and application of nanofluids with specific requirements, such as durability, stable suspension of particles, and negligible agglomeration. A novel nanofluid containing ionic liquid-alumina nanohybrids was studied for its thermal performance and stability in miniature heat transfer devices. The hybrid nanofluid showed improved thermal performance compared to alumina nanofluid, especially at smaller particle sizes, making it a promising option for small scale heat transfer applications.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Thermal efficiency analysis of a nanofluid-based micro combined heat and power system using CNG and biogas

M. Mazlan et al.

Summary: In this study, a micro-CHP system using nanofluids as a working fluid was developed to improve thermal performance. The results showed that nanofluids enhance the efficiency of the system, especially Al2O3 nanofluid.

ENERGY (2021)

Add to Collection

Article Thermodynamics

The MXene/water nanofluids with high stability and photo-thermal conversion for direct absorption solar collectors: A comparative study

Hao Wang et al.

Summary: The study investigates the photothermal conversion efficiency of MXene and graphene nanofluids for solar energy utilization, demonstrating superior optical properties of MXene nanofluids and higher thermal conductivity of graphene nanofluids, with the optimal concentration at 20 ppm.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Experimental investigations of the performance of a flat-plate solar collector using carbon and metal oxides based nanofluids

Naveed Akram et al.

Summary: In this study, water-based nanofluids were synthesized using covalently functionalized carbon nanoplatelets and non-covalently functionalized metal oxides nanoparticles. The stability and improved thermal properties of these nanofluids were experimentally verified and matched with theoretical models. The addition of nanomaterials significantly enhanced thermal conductivity, density, and specific heat capacity of the nanofluids, demonstrating their potential for improving the thermal performance of flat-plate solar collectors.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Mixed convection and thermal radiation effect on MHD peristaltic motion of Powell-Eyring nanofluid

Bilal Ahmed et al.

Summary: This study investigates the influence of mixed convection, Hall current, and magnetic field on the peristaltic motion of Powell-Eyring nanofluid in a symmetric channel, considering factors such as viscous dissipation, thermal radiation, Brownian motion, and thermophoresis. Numerical solutions show that higher magnetic fields lead to an increase in temperature, while Hall effects exhibit the opposite trend.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling

Min Yang et al.

Summary: The study investigates the convective heat transfer characteristics and measurement methods of nanofluid aerosol cooling, establishing a theoretical model for the convective heat transfer coefficient and proposing a new measurement device to validate the theoretical model.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Effects of surfactant and nanofluid on the performance and optimization of a microchannel heat sink

Hielfarith Suffri Shamsuddin et al.

Summary: This study investigates the influence of surfactant Triton X-100 on boron nitride nanotubes nanofluid in microchannel heat sink, showing that the surfactant can improve thermal performance at 30 degrees Celsius and reduce pressure drop at 50 degrees Celsius. Optimized MCHS dimensions given by MOPSO technique result in improved overall performance for MCHS systems.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Developing Convective Mass Transfer of Nanofluids in Fully Developed Flow Regimes in a Circular Tube: Modeling using Fuzzy Inference System and ANFIS

Hossein Beiki

Summary: This study compared the convective mass transfer of different nanofluids in a circular tube using intelligent models. The results showed that the size and type of nanoparticles played a significant role in determining the mass transfer and optimal concentration. The ANFIS model with a simpler structure performed well in predicting mass transfer.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Numerical investigation of turbulent flow and heat transfer of nanofluid inside a wavy microchannel with different wavelengths

Hamed Bazdar et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Thermodynamics

Entropy generation and economic analyses in a nanofluid filled L-shaped enclosure subjected to an oriented magnetic field

Seyyed Masoud Seyyedi et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Using of Artificial Neural Networks (ANNs) to predict the thermal conductivity of Zinc Oxide-Silver (50%-50%)/Water hybrid Newtonian nanofluid

Wei He et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Multidisciplinary Sciences

MHD effect on mixed convection of annulus circular enclosure filled with Non-Newtonian nanofluid

Emad D. Aboud et al.

HELIYON (2020)

Add to Collection

Article Thermodynamics

Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid

Hossein Arasteh et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Physics, Multidisciplinary

Statistical investigation for developing a new model for rheological behavior of ZnO-Ag (50%-50%)/Water hybrid updates Newtonian nanofluid using experimental data

Behrooz Ruhani et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

Add to Collection

Article Physics, Multidisciplinary

Statistical investigation for developing a new model for rheological behavior of Silica-ethylene glycol/Water hybrid Newtonian nanofluid using experimental data

Behrooz Ruhani et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

Add to Collection

Article Engineering, Chemical

Mixed convection of non-Newtonian nanofluid in an H-shaped cavity with cooler and heater cylinders filled by a porous material: Two phase approach

Zhixiong Li et al.

ADVANCED POWDER TECHNOLOGY (2019)

Add to Collection

Article Thermodynamics

Two phase natural convection and thermal radiation of Non-Newtonian nanofluid in a porous cavity considering inclined cavity and size of inside cylinders

Pouya Barnoon et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Physics, Multidisciplinary

Numerical study of unsteady natural convection of variable-order fractional Jeffrey nanofluid over an oscillating plate in a porous medium involved with magnetic, chemical and heat absorption effects using Chebyshev cardinal functions

R. Roohi et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2019)

Add to Collection

Article Thermodynamics

Effects of temperature-dependent properties on natural convection of power-law nanofluids in rectangular cavities with sinusoidal temperature distribution

Lei Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Thermal performance improvement in water nanofluid/GNP-SDBS in novel design of double-layer microchannel heat sink with sinusoidal cavities and rectangular ribs

Erfan Khodabandeh et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Thermodynamics

Characteristics of ferrofluid flow over a stretching sheet with suction and injection

Bahram Jalili et al.

CASE STUDIES IN THERMAL ENGINEERING (2019)

Add to Collection

Article Mathematics, Applied

Simultaneous impacts of MHD and variable wall temperature on transient mixed Casson nanofluid flow in the stagnation point of rotating sphere

A. Mahdy

APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION (2018)

Add to Collection

Article Engineering, Mechanical

Natural convection flow of a power-law non-Newtonian nanofluid in inclined open shallow cavities filled with porous media

Z. A. S. Raizah et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air

Jianchao Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials

Yaogang Wang et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2018)

Add to Collection

Article Thermodynamics

CFD analysis of thermal and hydrodynamic characteristics of hybrid nanofluid in a new designed sinusoidal double-layered microchannel heat sink

Ramin Mashayekhi et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

Add to Collection

Article Engineering, Mechanical

Two-phase simulation of non-Newtonian nanofluid natural convection in a circular annulus partially or completely filled with porous media

Majid Siavashi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Add to Collection

Article Mathematics, Applied

Modeling natural convection boundary layer flow of micropolar nanofluid over vertical permeable cone with variable wall temperature

S. E. Ahmed

APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION (2017)

Add to Collection

Article Engineering, Aerospace

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Li Benkai et al.

CHINESE JOURNAL OF AERONAUTICS (2016)

Add to Collection

Article Thermodynamics

Effects of temperature and nanoparticles concentration on rheological behavior of Fe3O4-Ag/EG hybrid nanofluid: An experimental study

Masoud Afrand et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)

Add to Collection

Article Engineering, Chemical

Heatline visualization of natural convection in a trapezoidal cavity partly filled with nanofluid porous layer and partly with non-Newtonian fluid layer

A. I. Alsabery et al.

ADVANCED POWDER TECHNOLOGY (2015)

Add to Collection

Article Engineering, Manufacturing

Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding

Yanbin Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.