☆ 4.7 Article

Effects of blending energetic iron nanoparticles in B20 fuel on lower CO and UHC emissions of the diesel engine in cold start condition

CASE STUDIES IN THERMAL ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Evaluation of MWCNT as fuel additive to diesel-biodiesel blend in a direct injection diesel engine

Hamit Solmaz et al.

Summary: Effects of adding multi-walled carbon nanotube (MWCNT) to waste frying oil biodiesel (B20) on engine performance and emissions were investigated. The results showed that MWCNT improved fuel properties and reduced emissions of hydrocarbon, CO and soot. However, it also led to increased NOx emissions.

BIOFUELS-UK (2023)

Add to Collection

Article Thermodynamics

Experimental investigation of performance, emissions and tribological characteristics of B20 blend from cottonseed and palm oil biodiesels

M. Jamshaid et al.

Summary: Depletion of fossil fuel reserves and environmental pollution have driven the research towards sustainable and clean energy sources production. Blended biodiesel fuels from cottonseed and palm oil showed lower emissions in engine testing and can be used as substitute fuels in diesel engines.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Evaluation of biodiesel on speciated PM2.5, organic compound, ultrafine particle and gaseous emissions from a low-speed EPA Tier II marine diesel engine coupled with DPF, DEP and SCR filter at various loads

Abdulfatah Abdu Yusuf et al.

Summary: This study investigated the effects of biodiesel-diesel blends on emissions from marine propulsion engines, with results showing that at 25% and high loads, the use of B50 blend fuel can reduce HC and CO emissions but increase NOx emissions.

ENERGY (2022)

Add to Collection

Article Environmental Sciences

Effect of low CeO2 nanoparticles dosage in biodiesel-blends on combustion parameters and toxic pollutants from common-rail diesel engine

Abdulfatah Abdu Yusuf et al.

Summary: Using low CeO2 nanoparticles in biodiesel blends can significantly reduce CO and HC emissions, increase NOx emissions, decrease organic compound emissions, and promote smaller particle sizes. Additionally, emissions of certain n-alkanes are minimal.

ATMOSPHERIC POLLUTION RESEARCH (2022)

Add to Collection

Article Thermodynamics

Effects of hybrid nanoparticle additives in n-butanol/waste plastic oil/diesel blends on combustion, particulate and gaseous emissions from diesel engine evaluated with entropy-weighted PROMETHEE II and TOPSIS: Environmental and health risks of plastic waste

Abdulfatah Abdu Yusuf et al.

Summary: Due to the limited use of plastic waste recycling, a large amount of plastic waste is buried or ends up in the ocean. This study investigates the effects of waste plastic pyrolysis oil, n-butanol, hybrid nanoparticles, and diesel fuel blends on combustion, emissions, and particulates from a diesel engine. The results show that the blend fuels can significantly reduce n-alkane emissions and the content of polycyclic aromatic hydrocarbons (PAHs) in particulates, but their effects on carbon monoxide (CO) and nitrogen oxides (NOx) emissions are uncertain.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Thermodynamics

A comparative exploration of thermal, radiative and pollutant emission characteristics of oil burner flame using palm oil biodiesel-diesel blend fuel and diesel fuel

S. H. Pourhoseini et al.

Summary: The study compared the effects of diesel fuel and palm oil biodiesel-diesel blend fuel on the flame characteristics of an oil burner. Results showed that the blend fuel produced a voluminous flame with lower temperature but higher concentration of soot particles compared to diesel fuel. The use of blend fuel also increased IR emissions and flame luminosity while decreasing NOx emissions significantly.

ENERGY (2021)

Add to Collection

Article Energy & Fuels

A comparative analysis of the engine performance and exhaust emissions characteristics of a diesel engine fueled with Mono ethylene glycol supported emulsion

Seyed Mohammad Safieddin Ardebili et al.

Summary: This study investigated the effects of MEGSE ratio and engine speed on engine performance and emissions. High levels of MEGSE were found to decrease BTE and engine torque, while reducing CO, NOx, and soot emissions. Additionally, the BSFC and BSEC values were higher in MEGSE/diesel blends compared to base fuel.

FUEL (2021)

Add to Collection

Article Thermodynamics

Prediction of performance and exhaust emissions of a CI engine fueled with multi-wall carbon nanotube doped biodiesel-diesel blends using response surface method

Hamit Solmaz et al.

Summary: This study investigated the performance and exhaust emissions of a direct-injection diesel engine fueled with multi-walled carbon nanotubes (MWCNTs) in biodiesel-blended diesel fuel using response surface method (RSM). Results showed that adding MWCNTs to the fuel can reduce UHC and CO emissions while increasing NOx emissions. The optimal engine working conditions were found to be a load of 10 Nm and a concentration of 98 ppm for MWCNTs.

ENERGY (2021)

Add to Collection

Article Energy & Fuels

Effects of diesel-ethanol-THF blend fuel on the performance and exhaust emissions on a heavy-duty diesel engine

Yangyi Wu et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

The effect of injection pressure on the thermal performance and emission characteristics of an oil burner operating on B20 palm oil biodiesel-diesel blend fuel

Nidal H. Abu-Hamdeh et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

Comparative evaluation of the influence of waste vegetable oil and waste animal oil-based biodiesel on diesel engine performance and emissions

Suleyman Simsek et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

Experimental investigation on the combustion, performance and exhaust emission characteristics of poppy oil biodiesel-diesel dual fuel combustion in a CI engine

Ahmet Uyumaz et al.

FUEL (2020)

Add to Collection

Review Energy & Fuels

Experimental investigation of the effects of nanoparticles as an additive in diesel and biodiesel fuelled engines: a review

Shiva Kumar et al.

BIOFUELS-UK (2019)

Add to Collection

Article Biochemistry & Molecular Biology

A Two-Step Method for Transferring Single-Walled Carbon Nanotubes onto a Hydrogel Substrate

Mozhdeh Imaninezhad et al.

MACROMOLECULAR BIOSCIENCE (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Analysis of blended fuel properties and engine performance with palm biodiesel-diesel blended fuel

Obed M. Ali et al.

RENEWABLE ENERGY (2016)

Add to Collection

Article Energy & Fuels

Effects of diesel fuel temperature on fuel flow and spray characteristics

Youngsoo Park et al.

FUEL (2015)

Add to Collection

Article Thermodynamics

Nanoparticles of energetic materials: synthesis and properties (review)

M. K. Berner et al.

COMBUSTION EXPLOSION AND SHOCK WAVES (2013)

Add to Collection

Article Chemistry, Physical

The responses of Ceriodaphnia dubia toward multi-walled carbon nanotubes: Effect of physical-chemical treatment

Minghua Li et al.

CARBON (2011)

Add to Collection

Article Thermodynamics

Preparation of Palm Oil Biodiesel and Effect of Various Additives on NOx Emission Reduction in B20: An Experimental Study

N. Vedaraman et al.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2011)

Add to Collection

Article Engineering, Mechanical

A Comparison of the Different Methods of Using Jatropha Oil as Fuel in a Compression Ignition Engine

M. Senthil Kumar et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2010)

Add to Collection

Article Energy & Fuels

Effects of biodiesel on passenger car fuel consumption, regulated and non-regulated pollutant emissions over legislated and real-world driving cycles

Georgios Fontaras et al.

FUEL (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.