☆ 4.6 Article

The Use of Micro-Ribbons and Micro-Fibres in the Formulation of 3D Printed Fast Dissolving Oral Films

PHARMACEUTICALS (2023)

Related references

Note: Only part of the references are listed.

Article Pharmacology & Pharmacy

Effects of Various Drying Times on the Properties of 3D Printed Orodispersible Films

Natalia Janigova et al.

Summary: This study aimed to evaluate the influence of different drying times on the properties of orodispersible films. The results showed that drying time affects the physical and mechanical properties of the films. Moisture content has a significant impact on the disintegration time, plasticity, and related properties of the films.

PHARMACEUTICS (2022)

Add to Collection

Review Pharmacology & Pharmacy

Recent progress of 3D-printed microneedles for transdermal drug delivery

Qingliang Yang et al.

Summary: Microneedles as a novel transdermal drug delivery system have gained extensive attention for their improved patient compliance and self-administration compared to traditional administration methods. Recent studies on utilizing 3D printing to fabricate transdermal drug delivery systems show promising potential for versatile printing methodologies and different formulation strategies.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Pressure-assisted microsyringe 3D printing of oral films based on pullulan and hydroxypropyl methylcellulose

M. Elbadawi et al.

Summary: The study utilized 3D printing to produce hybrid film structures of pullulan and hydroxypropyl methylcellulose loaded with caffeine as a model drug. It was found that the addition of hydroxypropyl methylcellulose increased the mechanical properties of the pullulan films. Additionally, the spatial orientation of the hybrid films was explored to maximize their mechanical properties.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Fused Deposition Modeling (FDM), the new asset for the production of tailored medicines

Sylvain Cailleaux et al.

Summary: The shift towards precision medicine in conventional medicine has led to a focus on customizing oral drug delivery using 3D printing technology, particularly Fused Deposition Modeling (FDM). Various FDM methods have been reported in the production of pharmaceutical solid oral forms, with challenges such as high printing temperatures for thermosensitive ingredients and moisture sensitivity in storage studies. FDM appears to be well-suited for treating rare diseases and populations requiring tailored doses or release kinetics.

JOURNAL OF CONTROLLED RELEASE (2021)

Add to Collection

Article Polymer Science

Characterization of Hydrophilic Polymers as a Syringe Extrusion 3D Printing Material for Orodispersible Film

Pattaraporn Panraksa et al.

Summary: The study investigated the use of hydrophilic polymers and 3D printing technology to create orodispersible films, with sodium carboxymethylcellulose showing promising results in terms of printing resolution and disintegration time. However, the rigid and brittle nature of the SCMC-5 3D-printed ODFs indicates the need for specialized packaging to prevent damage before practical use.

POLYMERS (2021)

Add to Collection

Article Pharmacology & Pharmacy

Manufacturing and Examination of Vaginal Drug Delivery System by FDM 3D Printing

Petra Arany et al.

Summary: Vaginal drug delivery systems using 3D printing technology can offer long-term and consistent release of active pharmaceutical ingredients. The filled jellified metronidazole vaginal rings showed potential bactericidal effects based on microbiological assays, and the polymer exhibited good biocompatibility properties.

PHARMACEUTICS (2021)

Add to Collection

Review Pharmacology & Pharmacy

Recent advances of oral film as platform for drug delivery

Mengning He et al.

Summary: Orally drug delivery films have attracted extensive interest due to their faster rate of drug absorption, higher bioavailability, and better patient compliance, especially for children and elders with swallowing difficulties. Recent advances in designing and developing novel oral films have focused on delivering proteins and peptides effectively. This review aims to summarize these newly developed oral films, discussing their formulation strategies, manufacturing methods, advantages, and limitations.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Influence of carbon nanofiber reinforcement on mechanical properties of polymer composites developed by FDM

Digamba Bilkar et al.

Summary: Polymers are a new class of materials widely used in mechanical and functional parts. In this study, carbon nanofibre reinforced ABS based polymer composites were developed to improve mechanical properties of FDM parts, which showed enhanced performance with the addition of carbon nanofibres.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Rheological and Printability Assessments on Biomaterial Inks of Nanocellulose/Photo-Crosslinkable Biopolymer in Light-Aided 3D Printing

Qingbo Wang et al.

Summary: Biomaterial inks based on neutral and negatively charged CNFs and photo-crosslinkable biopolymers show promising potential in 3D bioprinting. By conducting quantitative rheological measurements and printability assessments, this study provides valuable information for further development of these nanocellulose-based systems into photo-crosslinkable bioinks for cell-laden 3D bioprinting applications.

FRONTIERS IN CHEMICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

3D poly (L-lactide)/chitosan micro/nano fibrous scaffolds functionalized with quercetin-polydopamine for enhanced osteogenic and anti-inflammatory activities

Ling Zhu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D printing of multilayered orodispersible films with in-process drying

Jan Elbl et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Synthesis, characterization and anti-cancer studies of Mn(II), Cu(II), Zn(II) and Pt(II) dithiocarbamate complexes - crystal structures of the Cu(II) and Pt (II) complexes

Peter A. Ajibade et al.

INORGANICA CHIMICA ACTA (2020)

Add to Collection

Article Pharmacology & Pharmacy

Development of a quantitative method to evaluate the printability of filaments for fused deposition modeling 3D printing

Pengchong Xu et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

Orodispersible Polymer Films with the Poorly Water-Soluble Drug, Olanzapine: Hot-Melt Pneumatic Extrusion for Single-Process 3D Printing

Hui-Won Cho et al.

PHARMACEUTICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Targeting Microglia for Therapy of Parkinson's Disease by Using Biomimetic Ultrasmall Nanoparticles

Hanghang Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D printing tablets: Predicting printability and drug dissolution from rheological data

Moe Elbadawi et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

Add to Collection

Article Pharmacology & Pharmacy

3D printed chitosan dressing crosslinked with genipin for potential healing of chronic wounds

Forough Hafezi et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

Add to Collection

Article Pharmacology & Pharmacy

Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process

Alvaro Goyanes et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

Add to Collection

Article Pharmacology & Pharmacy

Development and evaluation of pharmaceutical 3D printability for hot melt extruded cellulose-based filaments

Jiaxiang Zhang et al.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Pharmacology & Pharmacy

Unidirectional drug release from 3D printed mucoadhesive buccal films using FDM technology: In vitro and ex vivo evaluation

Georgios K. Eleftheriadis et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)

Add to Collection

Article Automation & Control Systems

Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer

Shilpesh R. Rajpurohit et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Composites

The microstructure and mechanical properties of 3D printed carbon nanotube-polylactic acid composites

Huseini S. Patanwala et al.

POLYMER COMPOSITES (2018)

Add to Collection

Article Chemistry, Medicinal

The Application of 3D Printing in the Formulation of Multilayered Fast Dissolving Oral Films

Touraj Ehtezazi et al.

JOURNAL OF PHARMACEUTICAL SCIENCES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament

Jehad M. Nasereddin et al.

PHARMACEUTICAL RESEARCH (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Current progress in production of biopolymeric materials based on cellulose, cellulose nanofibers, and cellulose derivatives

Hiba Shaghaleh et al.

RSC ADVANCES (2018)

Add to Collection

Article Biotechnology & Applied Microbiology

Chitosan nanoparticles triggered the induction of ROS-mediated cytoprotective autophagy in cancer cells

Hao Wang et al.

ARTIFICIAL CELLS NANOMEDICINE AND BIOTECHNOLOGY (2018)

Add to Collection

Article Pharmacology & Pharmacy

Personalized orodispersible films by hot melt ram extrusion 3D printing

Umberto M. Musazzi et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Degradation Classification of 3D Printing Thermoplastics Using Fourier Transform Infrared Spectroscopy and Artificial Neural Networks

Sung-Uk Zhang

APPLIED SCIENCES-BASEL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Polyvinyl alcohol reinforced with crystalline nanocellulose for 3D printing application

A. Cataldi et al.

MATERIALS TODAY COMMUNICATIONS (2018)

Add to Collection

Article Pharmacology & Pharmacy

Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets

Jiaxiang Zhang et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)

Add to Collection

Article Pharmacology & Pharmacy

3D printed orodispersible films with Aripiprazole

Witold Jamroz et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release Tablets

Tochukwu C. Okwuosa et al.

PHARMACEUTICAL RESEARCH (2016)

Add to Collection

Article Engineering, Manufacturing

Experimental investigations on fused deposition modelling of polymer-layered silicate nanocomposite

Vishal Francis et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2016)

Add to Collection

Article Chemistry, Applied

Aminoacids as non-traditional plasticizers of maltodextrins fast-dissolving films

Francesca Selmin et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Article Otorhinolaryngology

The Prevalence of Dysphagia among Adults in the United States

Neil Bhattacharyya

OTOLARYNGOLOGY-HEAD AND NECK SURGERY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Optical properties of polyvinyl alcohol (PVA) coated In2O3 nanoparticles

Dali Shao et al.

OPTICAL MATERIALS (2013)

Add to Collection

Article Chemistry, Applied

Relationship between tensile properties and film formation kinetics of epoxy resin reinforced with nanofibrillated cellulose

Hamad A. Al-Turaif

PROGRESS IN ORGANIC COATINGS (2013)

Add to Collection

Article Chemistry, Medicinal

Fast disintegrating films containing anastrozole as a dosage form for dysphagia patients

Dixit Anil Satyanarayana et al.

ARCHIVES OF PHARMACAL RESEARCH (2012)

Add to Collection

Article Chemistry, Applied

Preparation, structure and crystallinity of chitosan nano-fibers by a solid-liquid phase separation technique

Jianhao Zhao et al.

CARBOHYDRATE POLYMERS (2011)

Add to Collection

Article Engineering, Biomedical

Evolution of PVA gels prepared without crosslinking agents as a cell adhesive surface

Siddhi Gupta et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Cellulose Biocomposites-From Bulk Moldings to Nanostructured Systems

Lars A. Berglund et al.

MRS BULLETIN (2010)

Add to Collection

Article Pharmacology & Pharmacy

Monitoring crystallisation of drugs from fast-dissolving oral films with isothermal calorimetry

Simon Gaisford et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2009)

Add to Collection

Review Pharmacology & Pharmacy

Current perspectives in dissolution testing of conventional and novel dosage forms

Shirzad Azarmi et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.