☆ 4.7 Review

Three-Dimensional Accuracy and Stability of Personalized Implants in Orthognathic Surgery: A Systematic Review and a Meta-Analysis

JOURNAL OF PERSONALIZED MEDICINE (2023)

Related references

Note: Only part of the references are listed.

Article Dentistry, Oral Surgery & Medicine

Postoperative skeletal stability at the one-year follow-up after splintless Le Fort I osteotomy using patient-specific osteosynthesis versus conventional osteosynthesis: a randomized controlled trial

H. van der Wel et al.

Summary: The study aimed to evaluate the 1-year skeletal stability of osteotomized maxilla after Le Fort I surgery using either conventional or patient-specific osteosynthesis. The results showed that both methods resulted in stable outcomes, with less than 1mm translation and less than 1-degree rotation observed in the 27 patients examined.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2023)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Comparison of surface- and voxel-based registration on the mandibular ramus for long-term three-dimensional assessment of condylar remodelling following orthognathic surgery

Michael Boelstoft Holte et al.

Summary: The present study aimed to validate and compare the accuracy and reliability of surface- and voxel-based registration for long-term three-dimensional evaluation of condylar remodelling following Orthognathic Surgery. The results showed that surface-based registration was more accurate and reliable than voxel-based registration. However, the choice of reference structure may affect the performance difference.

DENTOMAXILLOFACIAL RADIOLOGY (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Comparison of the Accuracy of Maxillary Positioning With Interim Splints Versus Patient-Specific Guides and Plates in Executing a Virtual Bimaxillary Surgical Plan

Jason P. Jones et al.

Summary: The study aimed to compare the differences in maxillary repositioning using interim splints versus patient-specific guides and implants (PSIs). The results showed that PSI provided more accurate maxillary repositioning than interim splints.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2022)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Accuracy and cost effectiveness of a waferless osteotomy approach, using patient specific guides and plates in orthognathic surgery: a systematic review

A. Williams et al.

Summary: The aim of this systematic review was to evaluate the accuracy and cost-effectiveness of waferless osteotomy procedures in orthognathic surgery. The majority of studies included in the review reported acceptable accuracy and suggested that the procedure can be cost-effective. However, due to the lack of randomized controlled trials, the current evidence is not strong enough to recommend the widespread use of surgical cutting guides and customised/pre-bent plates in orthognathic surgery.

BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of mandibular proximal segment position using virtual surgical planning and custom osteosynthesis plates

J. Harding et al.

Summary: This study aimed to compare the accuracy of proximal segment position following bilateral sagittal split osteotomy using custom osteosynthesis plates versus conventional plates. The results showed smaller rotational error in the custom group. The root mean square error for all variables fell within clinical parameters. Therefore, customized mandibular fixation plates may be beneficial for individual patients.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2022)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Evaluation of the accuracy of virtual planning in bimaxillary orthognathic surgery: a systematic review

Gustavo Marques Tondin et al.

Summary: The purpose of this study was to evaluate the accuracy of virtual planning in bimaxillary orthognathic surgery by comparing the measurements of the surgical plan with the actual surgical result. The findings suggest that virtual planning shows great accuracy in bimaxillary orthognathic surgery.

BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2022)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Computed tomography imaging superimposition protocols to assess outcomes in orthognathic surgery: a systematic review with comprehensive recommendations

Fernando de Oliveira Andriola et al.

Summary: This systematic review analyzed the current evidence on three-dimensional computed tomography (CT) superimposition protocols used to assess dentomaxillofacial changes after orthognathic and orthofacial surgery. The results showed that voxel-based superimposition protocols had the highest accuracy and reproducibility, while protocols using automated processes and involving only one software were the most efficient.

DENTOMAXILLOFACIAL RADIOLOGY (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Virtual surgical analysis: long-term cone beam computed tomography stability assessment of segmental bimaxillary surgery

M. B. Holte et al.

Summary: This study proposes and validates a semi-automated approach for assessing the long-term stability of segmental bimaxillary surgery. The approach calculates the stability of the surgical outcome by comparing the 3D differences between short- and long-term postoperative positions. The results show excellent reliability for this approach.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2022)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

The current state of computer assisted orthognathic surgery: A narrative review

Dimitrios Apostolakis et al.

Summary: This paper describes the workflow of computer assisted orthognathic surgery (CAOS) using digital technology and provides insights on the advantages and limitations of the hardware and software used.

JOURNAL OF DENTISTRY (2022)

Add to Collection

Review Medicine, General & Internal

3D Printing and Virtual Surgical Planning in Oral and Maxillofacial Surgery

Adeeb Zoabi et al.

Summary: Compared to traditional manufacturing methods, additive manufacturing and 3D printing have the ability to fabricate complex structures and precise geometries. In the field of healthcare, 3D printing has replaced generic implantable medical devices and revolutionized oral and maxillofacial surgery. Surgeons have improved treatment methods and achieved better clinical outcomes through the use of 3D technologies.

JOURNAL OF CLINICAL MEDICINE (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Custom made cutting guides and osteosynthesis plates versus CAD/CAM occlusal splints in positioning and fixation of the maxilla in orthognathic surgery: A prospective randomized study

Eduardo Sanchez-Jauregui et al.

Summary: This study aimed to compare the accuracy of maxilla positioning in orthognathic surgery using custom-made devices and CAD/CAM splints. The results showed significant advantages of custom-made devices in the anterior-posterior and vertical axes, with no differences in the horizontal axis. Additionally, the use of custom-made devices reduced operative time.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2022)

Add to Collection

Letter Surgery

Conformity of the Virtual Surgical Plan to the Actual Result Comparing Five Craniofacial Procedure Types

Emanuele Zavattero et al.

PLASTIC AND RECONSTRUCTIVE SURGERY (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

What Is the Accuracy of Bimaxillary Orthognathic Surgery Using Occlusally- Based Guides and Patient-Specific Fixation in Both Jaws? A Cohort Study and Discussion of Surgical Techniques

Adam R. Abel et al.

Summary: The study aimed to evaluate the accuracy of double-jaw orthognathic surgery using occlusally-based guides and patient-specific fixation plates. The results showed absolute linear discrepancies between virtually-planned and surgically-achieved maxillary and mandibular positions. The bimaxillary orthognathic surgery method demonstrated high reproducibility and accuracy.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2022)

Add to Collection

Article Environmental Sciences

Three-Dimensional Comparison of the Maxillary Surfaces through ICP-Type Algorithm: Accuracy Evaluation of CAD/CAM Technologies in Orthognathic Surgery

Andrea Cassoni et al.

Summary: This retrospective study compares the accuracy of two different CAD/CAM systems in orthognathic surgery using an ICP algorithm. The study suggests that the splintless method is more accurate when only a Le Fort I osteotomy is performed.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2022)

Add to Collection

Article Medicine, General & Internal

Accuracy of Segmented Le Fort I Osteotomy with Virtual Planning in Orthognathic Surgery Using Patient-Specific Implants: A Case Series

Olina Rios et al.

Summary: This study evaluated the accuracy of segmented Le Fort I osteotomy using computer-aided orthognathic surgery and patient-specific titanium plates. The results demonstrated a high degree of accuracy, suggesting that this method is suitable for treating maxillary transversal insufficiencies.

JOURNAL OF CLINICAL MEDICINE (2022)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Accuracy of orthognathic surgery with customized titanium plates - Systematic review

C. E. Figueiredo et al.

Summary: This systematic review evaluated the accuracy of customized titanium plates in orthognathic surgery compared to standard outcome in virtual surgical planning. Most studies showed acceptable accuracy within established clinical parameters. However, due to variability in evaluation methods, a combined accuracy measure could not be calculated and a meta-analysis was not possible.

JOURNAL OF STOMATOLOGY ORAL AND MAXILLOFACIAL SURGERY (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of maxillary repositioning surgery using CAD/CAM customized surgical guides and fixation plates

A. Wong et al.

Summary: The study assessed the accuracy of maxillary repositioning surgery using CAD/CAM customized titanium surgical guides and fixation plates. The results showed that the differences between the planned and actual surgical movements were within clinically insignificant range.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of splint vs splintless technique for virtually planned orthognathic surgery: A voxel-based three-dimensional analysis

Lorena Karanxha et al.

Summary: This study compared the accuracy of two transferring methods for virtually planned orthognathic surgery, with the customized surgical guide system proving to be more accurate than the CAD/CAM intermediate splint system.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2021)

Add to Collection

Article Medicine, Research & Experimental

A comparison of voxel- and surface-based cone-beam computed tomography mandibular superimposition in adult orthodontic patients

Gaofeng Han et al.

Summary: The study evaluated the accuracy, reliability, and efficiency of voxel- and surface-based registrations for CBCT mandibular superimposition in adult orthodontic patients. Results showed both methods to be accurate and reliable, with voxel-based registration being more efficient than surface-based registration.

JOURNAL OF INTERNATIONAL MEDICAL RESEARCH (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Three-Dimensional Repositioning of the Maxilla in Orthognathic Surgery Using Patient-Specific Titanium Plates: A Case Series

Seth Greenberg et al.

Summary: The study evaluated the accuracy of using boneborne patient-specific maxillary cutting guides and 3D-printed plates in repositioning the maxilla during bimaxillary orthognathic surgery. Results showed that there was minimal discrepancy between the postoperative maxilla position and the planned position in 3 dimensions. Using this technology allows for accurate 3-dimensional positioning of the maxilla according to the surgical plan.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2021)

Add to Collection

Article Multidisciplinary Sciences

Validation of the OrthoGnathicAnalyser 2.0-3D accuracy assessment tool for bimaxillary surgery and genioplasty

Frank Baan et al.

Summary: Orthognathic surgery is commonly performed to correct dentofacial deformities, and virtual treatment planning is essential in preparation. The OrthoGnathicAnalyser 2.0 tool allows for quantifying the accuracy of orthognathic surgery, specifically assessing osseous chin accuracy. The study confirms the high reproducibility of OrthoGnathicAnalyser 2.0 in quantifying skeletal movements between two (CB)CT scans.

PLOS ONE (2021)

Add to Collection

Article Surgery

Randomized Clinical Trial of the Accuracy of Patient-Specific Implants versus CAD/CAM Splints in Orthognathic Surgery

Biao Li et al.

Summary: This study compared the accuracy of patient-specific implants and CAD/CAM surgical splints for maxilla repositioning in orthognathic surgery, and found that using patient-specific implants resulted in a more accurate maxilla position than CAD/CAM surgical splints.

PLASTIC AND RECONSTRUCTIVE SURGERY (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Virtual Analysis of Segmental Bimaxillary Surgery: A Validation Study

Michael Boelstoft Holte et al.

Summary: This study proposed and validated an automated approach for 3D assessment of segmental bimaxillary surgery, showing excellent reliability in quantitative assessment of postoperative outcomes and accuracy on a group of subjects.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Three dimensional assessment of segmented Le Fort I osteotomy planning and follow-up: A validation study

Oliver da Costa et al.

Summary: The study developed and validated a 3D semi-automatic, voxel-based registration assessment protocol to evaluate planning accuracy and stability of segmented Le Fort I osteotomy with individualization of the maxillary segments. The results showed high reliability with only a small margin of error, indicating the protocol's potential for future improvement in the surgical procedure.

JOURNAL OF DENTISTRY (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Precision of orthognathic digital plan transfer using patient-specific cutting guides and osteosynthesis versus mixed analogue-digitally planned surgery: a randomized controlled clinical trial

M. Hanafy et al.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

The use of patient-specific implants in genioplasty and its clinical accuracy: a preliminary study

B. Li et al.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Splintless surgery using patient-specific osteosynthesis in Le Fort I osteotomies: a randomized controlled multi centre trial

J. Kraeima et al.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Validation of a 3D CBCT-based protocol for the follow-up of mandibular condyle remodeling

Pieter-Jan Verhelst et al.

DENTOMAXILLOFACIAL RADIOLOGY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Splintless orthognathic surgery in edentulous patients-a pilot study

J. P. T. F. Ho et al.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of 3D virtual surgical planning for maxillary positioning and orientation in orthognathic surgery

Renata Hernandes Tonin et al.

ORTHODONTICS & CRANIOFACIAL RESEARCH (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Do patient-specific cutting guides and plates improve the accuracy of maxillary repositioning in hemifacial microsomia?

K. Liu et al.

BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of laser-melted patient-specific implants in genioplasty - A three-dimensional retrospective study

Thomas Rueckschloss et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2020)

Add to Collection

Article Multidisciplinary Sciences

Validation of a patient-specific system for mandible-first bimaxillary surgery: ramus and implant positioning precision assessment and guide design comparison

Giovanni Badiali et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Accuracy of virtual planning in orthognathic surgery: a systematic review

Ali Alkhayer et al.

HEAD & FACE MEDICINE (2020)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Three-dimensional planning accuracy and follow-up protocol in orthognathic surgery: a validation study

E. Shaheen et al.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of patient-specific implants and additive-manufactured surgical splints in orthognathic surgery - A three-dimensional retrospective study

Thomas Rueckschloss et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Feasibility of iterative closest point algorithm for accuracy between virtual surgical planning and orthognathic surgery outcomes

Daniel Amaral Alves Marliere et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

The Use of Patient-Specific Implants in Oral and Maxillofacial Surgery

Michael F. Huang et al.

ORAL AND MAXILLOFACIAL SURGERY CLINICS OF NORTH AMERICA (2019)

Add to Collection

Article Health Care Sciences & Services

Optimally estimating the sample mean from the sample size, median, mid-range, and/or mid-quartile range

Dehui Luo et al.

STATISTICAL METHODS IN MEDICAL RESEARCH (2018)

Add to Collection

Editorial Material Dentistry, Oral Surgery & Medicine

Current status of surgical planning and transfer methods in orthognathic surgery

E. Pascal et al.

JOURNAL OF STOMATOLOGY ORAL AND MAXILLOFACIAL SURGERY (2018)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Toward a higher accuracy in orthognathic surgery by using intraoperative computer navigation, 3D surgical guides, and/or customized osteosynthesis plates: A systematic review

Maxim Van den Bempt et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2018)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

A new approach of splint-less orthognathic surgery using a personalized orthognathic surgical guide system: A preliminary study.

B. Li et al.

INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Clinical accuracy of waferless maxillary positioning using customized surgical guides and patient specific osteosynthesis in bimaxillary orthognathic surgery

Marcus Heufelder et al.

JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2017)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

A Systematic Review to Uncover a Universal Protocol for Accuracy Assessment of 3-Dimensional Virtually Planned Orthognathic Surgery

Ramy M. Gaber et al.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy and reliability of landmark-based, surface-based and voxel-based 3D cone-beam computed tomography superimposition methods

A. Ghoneima et al.

ORTHODONTICS & CRANIOFACIAL RESEARCH (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of virtual surgical planning in two-jaw orthognathic surgery: comparison of planned and actual results

Nan Zhang et al.

ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Comparison of the Accuracy of Voxel Based Registration and Surface Based Registration for 3D Assessment of Surgical Change following Orthognathic Surgery

Anas Almukhtar et al.

PLOS ONE (2014)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Accuracy of a Computer-Aided Surgical Simulation Protocol for Orthognathic Surgery: A Prospective Multicenter Study

Sam Sheng-Pin Hsu et al.

JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2013)

Add to Collection

Article Medicine, General & Internal

The Cochrane Collaboration's tool for assessing risk of bias in randomised trials

Julian P. T. Higgins et al.

BMJ-BRITISH MEDICAL JOURNAL (2011)

Add to Collection

Review Medicine, General & Internal

The PRISMA Statement for Reporting Systematic Reviews and Meta-Analyses of Studies That Evaluate Health Care Interventions: Explanation and Elaboration

Alessandro Liberati et al.

PLOS MEDICINE (2009)

Add to Collection

Article Surgery

Methodological index for non-randomized studies (MINORS):: Development and validation of a new instrument

K Slim et al.

ANZ JOURNAL OF SURGERY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.