☆ 4.7 Article

A cantilever-structure triboelectric nanogenerator for energy harvesting and defect detection via long short-term memory network

ISCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Trapezoidal Cantilever-Structure Triboelectric Nanogenerator Integrated with a Power Management Module for Low-Frequency Vibration Energy Harvesting

Zewei Ren et al.

Summary: A trapezoidal cantilever-structure triboelectric nanogenerator is demonstrated to efficiently harvest energy from vibration in the range of 1-22 Hz. The device can operate with a vibration source as low as 1 Hz, reaching an output power density of 62.2 W/m(3) at 5 Hz. Integration with a power management module enables self-powered timing and wireless transmitting systems.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Intelligent Sound Monitoring and Identification System Combining Triboelectric Nanogenerator-Based Self-Powered Sensor with Deep Learning Technique

Hongbo Yao et al.

Summary: In this paper, a novel low-cost self-powered sensor based on SDTENG is proposed, and it is integrated with deep learning technique to construct an intelligent sound monitoring and identification system. The system can recognize common road and traffic sounds with high accuracy, showing great potential in urban sound management.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

Planetary gearbox fault diagnosis using bidirectional-convolutional LSTM networks

Junchuan Shi et al.

Summary: Traditional model-based fault diagnosis techniques struggle to automatically extract spatial and temporal features, while deep learning methods are capable of automatic feature extraction but struggle to extract spatial and temporal features simultaneously.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Chemistry, Physical

Magnetic-assisted self-powered acceleration sensor for real-time monitoring vehicle operation and collision based on triboelectric nanogenerator

Xiaohui Lu et al.

Summary: In this study, a magnetic-assisted self-powered acceleration sensor (MSAS) based on the triboelectric nanogenerator is proposed for monitoring the acceleration of vehicles under different conditions. The frequency and trend of the electrical signals are analyzed to achieve simultaneous monitoring of the value and direction of the acceleration. The experimental results show that MSAS has good stability and a high signal-to-noise ratio, making it a valuable component in vehicle electronic systems.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Monitoring on triboelectric nanogenerator and deep learning method

Jian Yu et al.

Summary: The article discusses a potential method for real-time monitoring of sediment particles parameters using PLDD-TENG combined with deep learning, achieving high identifying accuracy with a CNN deep learning model. This provides a new approach for monitoring suspended sediment particles.

NANO ENERGY (2022)

Add to Collection

Article Energy & Fuels

Defect identification of wind turbine blade based on multi-feature fusion residual network and transfer learning

Jiawei Zhu et al.

Summary: This paper proposes a method of multi-feature fusion residual network combined with transfer learning, enhancing and constructing a dataset of WT blade images to achieve accurate detection. The method greatly reduces the time while achieving accurate detection, as compared to several convolutional neural networks based on indices.

ENERGY SCIENCE & ENGINEERING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Dual-Mode Triboelectric Nanogenerator for Wind Energy Harvesting and Self-Powered Wind Speed Monitoring

Lixia He et al.

Summary: A high-performance dual-mode triboelectric nanogenerator is proposed, which can efficiently collect wind energy and monitor wind speed in real-time, with excellent durability and energy-harvesting efficiency.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Gyroscope-Structured Triboelectric Nanogenerator for Harvesting Multidirectional Ocean Wave Energy

Qi Gao et al.

Summary: A gyroscope-structured triboelectric nanogenerator is proposed for harvesting multidirectional ocean wave energy. The experiments show that the generator exhibits good durability in water.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Barycenter Self-Adapting Triboelectric Nanogenerator for Sea Water Wave High-Entropy Energy Harvesting and Self-Powered Forecasting in Marine Meteorology

Yuhan Yang et al.

Summary: This article reports a barycenter self-adapting triboelectric nanogenerator (BSA-TENG) that can effectively convert irregular seawater waves into rotational mechanical energy and further into electric energy. This technology plays a key role in the development of sustainable energy harvesting from the ocean and self-powered service systems.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Energy & Fuels

Stomatopod-inspired integrate-and-fire triboelectric nanogenerator for harvesting mechanical energy with ultralow vibration speed

Zhongwei Xu et al.

Summary: This study proposes an integrate-and-fire triboelectric (IF-TENG) that can amplify the speed of mechanical energy from ultralow-speed vibrations and achieve stable output current at different vibration speeds.

APPLIED ENERGY (2022)

Add to Collection

Article Thermodynamics

Towards real-time self-powered sensing with ample redundant charges by a piezostack-based frequency-converted generator from human motions

Zhongjie Li et al.

Summary: This paper presents a piezostack-based frequency up-converting generator for scavenging ultra-low frequency vibration energy associated with human motion. The generator achieves ultra-low frequency conversion mainly through the impact-induced frequency conversion effect. The experimental results demonstrate the prototype's output performance and its potential application in real-time self-powered wearable devices.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Mechanical

Self-powered fault diagnosis of rolling bearings based on triboelectric effect

Qinkai Han et al.

Summary: This study conducted self-powered fault diagnosis of rolling bearings based on the triboelectric effect. The RF-TENG structure was designed and tested, achieving a classification accuracy exceeding 92%. The proposed RF-TENG based SP-FDRB is feasible and has excellent application prospect.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Chemistry, Physical

Fish gills inspired parallel-cell triboelectric nanogenerator

Peilun Yin et al.

Summary: A parallel-cell triboelectric nanogenerator (PC-TENG) is proposed in this study, which outperforms the serially connected zigzag structure-based triboelectric nanogenerator (Z-TENG) in terms of power output and has a higher power density. The frequency and reciprocating distance of the excitation are found to positively affect the output of the PC-TENG.

NANO ENERGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A Hybrid Generator with Electromagnetic Transduction for Improving the Power Density of Triboelectric Nanogenerators and Scavenging Wind Energy

Chuanfu Xin et al.

Summary: This work proposes a hybridization scheme with electromagnetic generators (EMGs) to improve the power density of triboelectric nanogenerators (TENGs). Experimental results show that the power density of the hybrid generator is 29.8 times higher than that of the TENG without electromagnetic generators. The study also investigates the influence of different resistant loads on the average power of TENGs.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Add to Collection

Article Chemistry, Physical

A Tuning-Fork Triboelectric Nanogenerator with Frequency Multiplication for Efficient Mechanical Energy Harvesting

Nian Liu et al.

Summary: This study proposes a frequency-multiplication TENG based on intrinsic high frequency and investigates the effects of intrinsic frequency, dielectric's thickness, and gap distance on its electric performance through experiments with a tuning-fork TENG. The results show that the frequency-multiplication TENG can achieve large total transferred charges and average power density at the triggering frequency of 0.2Hz, and its impedance resistance is independent of the mechanical triggering frequency, making it suitable for efficient distributed energy harvesting.

SMALL METHODS (2022)

Add to Collection

Article Automation & Control Systems

Prebent Membrane-Based Disk-Type Triboelectric Nanogenerator Applied to Fault Diagnosis in Rotating Machinery

Qinkai Han et al.

Summary: A prebent membrane-based triboelectric nanogenerator (PM-TENG) was proposed for harvesting rotational energy and applied to fault diagnosis in rotating machinery. It was demonstrated that the PM-TENG has self-powered characteristics and can effectively drive micropowered electronic devices. By identifying fault characteristic frequencies using the PM-TENG's output current model and applying signal processing and machine learning algorithms, fault classification of rotating machinery can be achieved with high accuracy.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Contactless Fault Diagnosis for Railway Point Machines Based on Multi-Scale Fractional Wavelet Packet Energy Entropy and Synchronous Optimization Strategy

Yongkui Sun et al.

Summary: The paper proposes a sound-based fault diagnosis method for railway point machines (RPMs) using fractional calculus and coarse-grain process. A novel feature called multi-scale fractional WPDE (FWPDE) is developed to improve the fault diagnosis accuracy. The paper also presents a synchronous optimization strategy based on binary particle swarm optimization (BPSO) to select optimal feature set and optimize the hyperparameters of support vector machine (SVM), further improving the diagnosis accuracy. The proposed method is verified to be superior and effective compared to existing fault diagnosis methods.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2022)

Add to Collection

Article Engineering, Multidisciplinary

Maximal overlap discrete wavelet packet transforms-based bipolar neutrosophic cross entropy measure for identification of rotor defects

C. P. Gandhi et al.

Summary: This study proposes a novel methodology for automatically identifying the severity of rotor defects. By using wavelet packet transforms and cross entropy measures, the vibration signals are transformed into different sets for defect identification. Compared to existing methods, this approach can identify more types of rotor defects and provides consistent and feasible results.

MEASUREMENT (2022)

Add to Collection

Article Engineering, Industrial

Intelligent fault identification of hydraulic pump using deep adaptive normalized CNN and synchrosqueezed wavelet transform

Shengnan Tang et al.

Summary: In this study, a normalized convolutional neural network (NCNN) with batch normalization strategy is proposed for fault diagnosis of hydraulic piston pump. Experimental results demonstrate that the method can accurately and reliably complete the fault classification of hydraulic pump.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Chemistry, Physical

Broadband vibration energy powered autonomous wireless frequency monitoring system based on triboelectric nanogenerators

Xiaohan Zhang et al.

Summary: Vibration frequency monitoring is crucial for safety inspection and fault detection of mechanical equipment. This paper presents a broadband vibration energy powered autonomous wireless frequency monitoring system based on triboelectric nanogenerators, which combines the characteristics of energy harvesting and sensing to achieve self-powered and autonomous vibration monitoring.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Influence of temperature difference on performance of solid-liquid triboelectric nanogenerators

Fan Shen et al.

Summary: This study investigates the influence of temperature on the output performance of solid-liquid triboelectric nanogenerators (TENGs). The results show that temperature has an inconsistent effect on different TENG materials, with the ion concentration in the solution playing a dominant role in the charge transfer process.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Investigating the output performance of triboelectric nanogenerators with single/double-sided interlayer

Chuanfu Xin et al.

Summary: This study investigates the influence of different thicknesses of PI interlayers on the electric outputs of TENGs, revealing that the output voltage of TENGs decreases with the increase of PI thickness. Additionally, the study examines the impact of interlayers on the positive electrode of TENGs, finding that the output voltage of TENGs with graphite paper interlayers is higher than those without interlayers. Furthermore, the study explores the output performance of TENGs with both negative and positive interlayers, demonstrating a decline in electric outputs due to the coupling effect of PI and graphite paper interlayers.

NANO ENERGY (2022)

Add to Collection

Article Energy & Fuels

Towards self-powered technique in underwater robots via a high-efficiency electromagnetic transducer with circularly abrupt magnetic flux density change

Zhongjie Li et al.

Summary: This study introduces a high-efficiency electromagnetic transducer that harvests kinetic energy from ocean currents to solve the electric energy replenishment issue in underwater robots. By using the finite element method, it is shown through simulation and experimentation that the alternating magnet array produces higher induced voltage and output power efficiency, making it suitable for self-powered underwater robotic systems.

APPLIED ENERGY (2021)

Add to Collection

Article Thermodynamics

Design, modeling and experimental validation of a low-frequency cantilever triboelectric energy harvester

Chaoyang Zhao et al.

Summary: A novel cantilever triboelectric energy harvester for low-frequency vibration energy harvesting is proposed in this paper. The harvester has a simple design and can harvest energy from broadband vibration sources effectively. Performance can be improved by adjusting the gap distance between components, making it cost-effective for scavenging low-frequency vibration energy.

ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

All-in-one 3D acceleration sensor based on coded liquid-metal triboelectric nanogenerator for vehicle restraint system

Binbin Zhang et al.

Summary: Vehicle restraint systems rely on 3D acceleration sensors to detect collision positions and forces, and a novel sensor based on liquid-metal triboelectric nanogenerator offers advantages of small size, high sensitivity, low cost, and self-powering. This sensor has wide detection range and excellent stability, making it a promising candidate for vehicle safety systems.

MATERIALS TODAY (2021)

Add to Collection

Article Chemistry, Physical

Detection of driving actions on steering wheel using triboelectric nanogenerator via machine learning

Haodong Zhang et al.

Summary: This study investigates the use of TENG as a sensor for detecting driver's steering actions, showing that TENG has the fastest response speed in driving simulator experiments. The trained machine learning algorithm achieves an accuracy of 92.0% in the test dataset, indicating the potential of using TENG as a sensor for driver's steering action detection.

NANO ENERGY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Power enhancement of MEMS vibrational electrostatic energy harvester by stray capacitance reduction

Hiroaki Honma et al.

Summary: This study introduces a design method to enhance the output power of vibrational MEMS electrostatic energy harvesters by reducing reactive power. Analytical studies show that reducing internal parasitic capacitance and increasing buried oxide layer thickness significantly improves power factor and delivers more power effectively. By applying this design strategy to an actual device, a 2.9-fold increase in output power is achieved through optimizing the structure.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2021)

Add to Collection

Article Chemistry, Analytical

A Self-Powered and Highly Accurate Vibration Sensor Based on Bouncing-Ball Triboelectric Nanogenerator for Intelligent Ship Machinery Monitoring

Taili Du et al.

Summary: A self-powered and highly accurate vibration sensor based on BB-TENG technology has been proposed for monitoring the work conditions of ship machinery, demonstrating high signal-to-noise ratio and low error rate. Furthermore, this sensor can convert vibration energy into electricity to power LED lights and a temperature sensor.

MICROMACHINES (2021)

Add to Collection

Article Multidisciplinary Sciences

A high-performance triboelectric-electromagnetic hybrid wind energy harvester based on rotational tapered rollers aiming at outdoor IoT applications

Yan Fang et al.

Summary: This article introduces a high-performance hybrid wind energy harvester that can provide sustainable power and self-powered wind speed sensor functions. At wind speeds of 12 m/s, super high voltage peaks and high power outputs can be achieved, which can light up many LED lights and a 5W bulb, as well as demonstrate a self-powered wireless temperature and humidity sensing network.

ISCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Liquid-metal embedded sponge-typed triboelectric nanogenerator for omnidirectionally detectable self-powered motion sensor

Jihyeon Park et al.

Summary: The liquid-metal embedded sponge-typed TENG (LMST) exhibits high flexibility and stretchability, allowing for versatile applications and high power density output. By connecting wires, the LMST provides convenient electrical power supply and can enhance power by increasing the number of wires connected.

NANO ENERGY (2021)

Add to Collection

Article Physics, Applied

Cantilever damage evaluation using impedance-loaded SAW sensor with continuous wavelet analysis and machine learning

Sena Suzuki et al.

Summary: In this study, a wireless measurement system is required to monitor the health of large-scale structures such as bridges. One method involves using an impedance-loaded wireless surface acoustic wave (SAW) sensor to detect the health of the structures. Additionally, machine learning is applied to evaluate cantilever damage, showing that the proposed method can accurately evaluate damage.

JAPANESE JOURNAL OF APPLIED PHYSICS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Combination bidirectional long short-term memory and capsule network for rotating machinery fault diagnosis

Tian Han et al.

Summary: A novel method for fault classification based on Bi-LSTM and BLC-CNN was proposed in this study, effectively denoising and fusing features with the use of Bi-LSTM and handling fault diagnosis with insufficient training samples with capsule network. The method's effectiveness and superior performance were validated through analyzing bearings and gears data under different noise conditions.

MEASUREMENT (2021)

Add to Collection

Review Multidisciplinary Sciences

Hybridized nanogenerators for effectively scavenging mechanical and solar energies

Xue Zhao et al.

Summary: Solar and wind energy harvesting technology is becoming increasingly economical and efficient, supported by government policies worldwide. Hybridized nanogenerators offer a way to effectively harness wasted mechanical and solar energy in daily life, with potential applications in energy and self-powered sensor systems in the future.

ISCIENCE (2021)

Add to Collection

Article

Damage detection in a cantilever beam using noisy mode shapes with an application of artificial neural network-based improved mode shape curvature technique

Sonu Kumar Gupta et al.

Asian Journal of Civil Engineering (2021)

Add to Collection

Article Engineering, Multidisciplinary

Bearing defect identification via evolutionary algorithm with adaptive wavelet mutation strategy

Sumika Chauhan et al.

Summary: A fault identification scheme for bearings is proposed in this paper, involving pre-processing vibration signals, extracting features, training SVM model, and optimizing SVM parameters for efficiency improvement. The efficacy of the proposed algorithm is verified with 100% accuracy.

MEASUREMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Investigation of frequency-up conversion effect on the performance improvement of stack-based piezoelectric generators

Yan Peng et al.

Summary: The paper investigates the influence of frequency-up conversion effect on high-performance energy harvesting using piezoelectric stack generators. Experimental results show significant enhancement in instantaneous power and average power with frequency-up conversion. The voltage response cycles consist of high-frequency high-amplitude oscillation and low-frequency low-amplitude harmonic vibration.

RENEWABLE ENERGY (2021)

Add to Collection

Article Chemistry, Analytical

Power Density Improvement of Piezoelectric Energy Harvesters via a Novel Hybridization Scheme with Electromagnetic Transduction

Zhongjie Li et al.

Summary: A novel hybridization scheme is proposed in this paper to improve the power density of piezoelectric energy harvester (PEH) using electromagnetic transduction. The experiment results show that the power density of the hybrid harvester is 686 times higher than that of the traditional BC-PEH, and it also exhibits better performance in charging capacitors. This hybrid approach has great significance for further development of self-powered devices.

MICROMACHINES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Quantitative diagnosis method of beam defects based on laser Doppler non-contact random vibration measurement

Shuanfeng Zhao et al.

MEASUREMENT (2020)

Add to Collection

Article Chemistry, Physical

A self-powered and high sensitivity acceleration sensor with V-Q-a model based on triboelectric nanogenerators (TENGs)

Chaoran Liu et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Analytical

A Self-Powered and Low Pressure Loss Gas Flowmeter Based on Fluid-Elastic Flutter Driven Triboelectric Nanogenerator

Trung Kien Phan et al.

SENSORS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Triboelectric Nanogenerator Based Smart Electronics via Machine Learning

Xianglin Ji et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Magnetic Flap-Type Difunctional Sensor for Detecting Pneumatic Flow and Liquid Level Based on Triboelectric Nanogenerator

Zheng Wang et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Physical

A high-efficient breeze energy harvester utilizing a full-packaged triboelectric nanogenerator based on flow-induced vibration

Qixuan Zeng et al.

NANO ENERGY (2020)

Add to Collection

Article Energy & Fuels

A Triboelectric Nanogenerator Consisting of Polytetrafluoroethylene (PTFE) Pellet for Self-Powered Detection of Mechanical Faults and Inclination in Dynamic Mechanics

Rui Guo et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Triboelectric and Piezoelectric Nanogenerators for Future Soft Robots and Machines

Min Pan et al.

ISCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Network Topology Optimization of Triboelectric Nanogenerators for Effectively Harvesting Ocean Wave Energy

Wenbo Liu et al.

ISCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Intelligently detecting and identifying liquids leakage combining triboelectric nanogenerator based self-powered sensor with machine learning

Weiqiang Zhang et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Analytical

Triboelectric Nanogenerator-Based Self-Powered Resonant Sensor for Non-Destructive Defect Detection

Jinkai Chen et al.

SENSORS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Real-time diagnosis of small energy impacts using a triboelectric nanosensor

Cristobal Garcia et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Article Instruments & Instrumentation

A broadband electret-based vibrational energy harvester using soft magneto-sensitive elastomer with asymmetrical frequency response profile

Zhaoshu Yang et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Engineering, Mechanical

A pattern matching identification method of cracks on cantilever beams through their bending modes measured by magnetoelastic sensors

Georgios Samourgkanidis et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

Add to Collection

Article Chemistry, Physical

A self-powered counter/timer based on a clock pointer-like frequency-tunable triboelectric nanogenerator for wind speed detecting

Taochuang Zhao et al.

NANO ENERGY (2019)

Add to Collection

Article Energy & Fuels

Micro electrostatic energy harvester with both broad bandwidth and high normalized power density

Yulong Zhang et al.

APPLIED ENERGY (2018)

Add to Collection

Article Instruments & Instrumentation

Crack identification through scan-tuning of vibration characteristics using piezoelectric materials

Shengjie Zhao et al.

SMART MATERIALS AND STRUCTURES (2017)

Add to Collection

Article Chemistry, Physical

Magnetically levitated-triboelectric nanogenerator as a self-powered vibration monitoring sensor

Zengxing Zhang et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Physical

Self-powered triboelectric nano vibration accelerometer based wireless sensor system for railway state health monitoring

Xuejun Zhao et al.

NANO ENERGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

A ball-bearing structured triboelectric nanogenerator for nondestructive damage and rotating speed measurement

Xiao Hui Li et al.

NANOTECHNOLOGY (2016)

Add to Collection

Article Physics, Applied

Performance of improved magnetostrictive vibrational power generator, simple and high power output for practical applications

Toshiyuki Ueno

JOURNAL OF APPLIED PHYSICS (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.