☆ 4.7 Article

Enhanced Li-S Battery Performance Boosted by a Large Surface Area Mesoporous Alumina-Based Interlayer

ACS APPLIED ENERGY MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Review Chemistry, Multidisciplinary

Regulating liquid and solid-state electrolytes for solid-phase conversion in Li-S batteries

Chao Xing et al.

Summary: This review provides a comprehensive overview of the solid-phase conversion mechanism in lithium-sulfur batteries, emphasizing the significance of electrolyte regulation in this process. The article explores the design strategy, challenges, and opportunities of electrolytes, and offers guidance for the development and utilization of high-energy lithium-sulfur batteries.

CHEM (2022)

Add to Collection

Article Chemistry, Physical

Nanofibers Comprising Interconnected Chain-Like Hollow N-Doped C Nanocages as 3D Free-Standing Cathodes for Li-S Batteries with Super-High Sulfur Content and Lean Electrolyte/Sulfur Ratio

Rakesh Saroha et al.

Summary: This paper proposes a novel nanostructure synthesis method for developing more realistic and sustainable host materials with feasible battery parameters for various energy storage applications.

SMALL METHODS (2022)

Add to Collection

Article Chemistry, Physical

Nanoporous Cobalt-Nitrogen-Carbon Catalyst-Based Multifunctional Interlayer for Enhanced Li-S Battery Performance

Zhenyu Zhang et al.

Summary: In this study, a nanoporous metal-nitrogen-carbon catalyst coating was fabricated as a separator layer to alleviate the lithium polysulfide shuttle effect and improve the performance of lithium-sulfur batteries.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Scalable 3D Honeycombed Co3O4 Modified Separators as Polysulfides Barriers for High-Performance Li-S Batteries

Liping Wu et al.

Summary: Lithium sulfur batteries have high theoretical capacity and energy density, but are limited by the shuttle effects of lithium polysulfides and the growth of lithium dendrites. This study proposes a novel three-dimensional honeycombed architecture coated on commercial separators to suppress the shuttle effects and allow for fast lithium ions transportation.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering Prelithiation of Polyacrylic Acid Binder: A Universal Strategy to Boost Initial Coulombic Efficiency for High-Areal-Capacity Si-Based Anodes

Zeheng Li et al.

Summary: In this study, an engineering prelithiation binder strategy based on polyacrylic acid is proposed to improve the initial Coulombic efficiency and cycling lives of SiOx anodes, which can also be applied to other Si anodes.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Tailored ZnO-ZnS heterostructure enables a rational balancing of strong adsorption and high catalytic activity of polysulfides for Li-S batteries

Wanyu Zhang et al.

Summary: This study achieves significantly enhanced conversion of polysulfides by balancing strong adsorption and high catalytic activity on the ZnO-ZnS/reduced graphene oxide (rGO) heterostructure. The heterostructure enables unrestricted adsorption-diffusion-conversion of polysulfides by integrating the advantages of ZnO, ZnS, and rGO. As a functional coating on separators, the heterostructures can promote redox kinetics and inhibit polysulfide shuttling.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

An Ion-Conductive Grafted Polymeric Binder with Practical Loading for Silicon Anode with High Interfacial Stability in Lithium-Ion Batteries

Zeheng Li et al.

Summary: In this study, a stress-distribution binder called GG-g-PAM is developed to dissipate mechanical stress and enhance cycling performance of silicon anodes. The GG-g-PAM binder exhibits high ionic conductivity and facilitates lithium-ion diffusion by providing lithium complexation sites. The binder shows promising potential for practical applications in silicon anode-based batteries.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Versatile Asymmetric Separator with Dendrite-Free Alloy Anode Enables High-Performance Li-S Batteries

Wenqi Yan et al.

Summary: This study improves the electrochemical performance of lithium-sulfur batteries by using a versatile asymmetric separator and a stable Li-Mg alloy anode. By employing a specially designed separator and alloy anode, the batteries exhibit long lifespan, low fading rate, and high area capacity under high current density and sulfur loading.

ADVANCED SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Improving the electrochemical performance of lithium-sulfur batteries by interface modification with a bifunctional electrolyte additive

Fangyan Liu et al.

Summary: In this study, a novel electrolyte additive (TFMSA) is introduced to stabilize the electrode/electrolyte interfaces and enhance the electrochemical performance of Li-S batteries. The results show that Li-S batteries with TFMSA-containing electrolyte exhibit excellent cycle performance and rate capability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Elaborate interface design of CoS2/Fe7S8/NG heterojunctions modified on a polypropylene separator for efficient lithium-sulfur batteries

Peng Chen et al.

Summary: Lithium-sulfur (Li-S) batteries are a promising energy storage system, but their development is hindered by issues such as low electronic conductivity and sluggish reaction kinetics. In this study, a heterostructure consisting of CoS2, Fe7S8, and nitrogen-doped reduced graphene oxide (CoS2/Fe7S8/NG) was prepared. The CoS2/Fe7S8/NG showed strong absorption and catalytic ability towards lithium polysulfides (LiPSs), and when used as a modification layer for the polypropylene (PP) separator in Li-S batteries, it exhibited high discharge capacity and cycling stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Bifunctional binder enables controllable deposition of polysulfides for high-loading Li-S battery

Zheng Huang et al.

Summary: This study proposes a novel lithiophilic and sulfiphilic bifunctional polymer (LSBP) binder to address the challenges of shuttle effect and random deposition in Lithium-sulfur (Li-S) batteries. The LSBP binder enhances the conversion reaction activity of LiPSs and suppresses the shuttle effect, resulting in a high-loading and crack-free sulfur-based cathode. This research provides a scalable strategy for practical Li-S batteries and contributes to their development with low cost and environmentally friendly approaches.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Geometrical engineering of a SPAN-graphene composite cathode for practical Li-S batteries

Hun Kim et al.

Summary: This study proposes an innovative 2D sulfurized-polyacrylonitrile/graphene (2D-SPAN/G) cathode design for practical and high-performance lithium-sulfur batteries. Graphene nanosheets serve as robust and conductive scaffolds, uniformly encapsulating sulfur particles, thus providing structural integrity and high electrochemical utilization.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Physical

Multifunctional cation-vacancy-rich ZnCo2O4 polysulfide-blocking layer for ultrahigh-loading Li-S battery

Zhenwei Li et al.

Summary: The authors designed and synthesized Zn defective Zn/Co oxide nanosheets to construct a multifunctional polysulfide-blocking layer to overcome the hurdles in commercializing Li-S batteries. The composite separator with high capacity and high sulfur loading shows promise for constructing high-performance Li-S batteries.

NANO ENERGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Uniform Polypyrrole Layer-Coated Sulfur/Graphene Aerogel via the Vapor-Phase Deposition Technique as the Cathode Material for Li-S Batteries

Fang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An Ultra-Long-Life Lithium-Rich Li1.2Mn0.6Ni0.2O2 Cathode by Three-in-One Surface Modification for Lithium-Ion Batteries

Xiaokai Ding et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

High specific surface area bimodal porous carbon derived from biomass reed flowers for high performance lithium-sulfur batteries

Zhifeng Wang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Ni/SiO2/Graphene-modified separator as a multifunctional polysulfide barrier for advanced lithium-sulfur batteries

Chao Chen et al.

NANO ENERGY (2020)

Add to Collection

Article Electrochemistry

Boosting the electrochemical performance of lithium/sulfur batteries with the carbon nanotube/Fe3O4 coated by carbon modified separator

Zhenghao Sun et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

An Efficient Separator with Low Li-Ion Diffusion Energy Barrier Resolving Feeble Conductivity for Practical Lithium-Sulfur Batteries

Xiaoxue Lv et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Entrapment of polysulfides by Al2O3 modified separator for high energy Li-S redox flow batteries

Dengxin Yan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Comparative Study of Water-Based LA133 and CMC/SBR Binders for Sulfur Cathode in Advanced Lithium-Sulfur Batteries

Weiwen Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Physical

Amorphous Al2O3 with N-Doped Porous Carbon as Efficient Polysulfide Barrier in Li-S Batteries

Shenzhen Deng et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

3D-crosslinked tannic acid/poly(ethylene oxide) complex as a three-in-one multifunctional binder for high-sulfur-loading and high-stability cathodes in lithium-sulfur batteries

Hong Zhang et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

A robust aqueous-processable polymer binder for long-life, high-performance lithium sulfur battery

Huan Yi et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Improve the electrodeposition of sulfur and lithium sulfide in lithium-sulfur batteries with a comb-like ion-conductive organo-polysulfide polymer binder

Fang-Lei Zeng et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Self-Assembled Close-Packed MnO2 Nanoparticles Anchored on a Polyethylene Separator for Lithium-Sulfur Batteries

Xiong Song et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Progress on the Critical Parameters for Lithium-Sulfur Batteries to be Practically Viable

Sheng-Heng Chung et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Mesoporous, conductive molybdenum nitride as efficient sulfur hosts for high-performance lithium-sulfur batteries

Guangshen Jiang et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Electrochemistry

Polar Ultrathin Self-Doping Carbon Nitride Nanosheets with Intrinsic Polysulfide Adsorption for High Performance Lithium-Sulfur Batteries

Yi Gong et al.

BATTERIES & SUPERCAPS (2018)

Add to Collection

Article Chemistry, Physical

Explore the influence of coverage percentage of sulfur electrode on the cycle performance of lithium-sulfur batteries

Zhong Li et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Nanostructured Metal Oxides and Sulfides for Lithium-Sulfur Batteries

Xue Liu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Advanced Lithium-Sulfur Batteries Enabled by a Bio-Inspired Polysulfide Adsorptive Brush

Teng Zhao et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Multidisciplinary Sciences

Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium-sulfur battery design

Xinyong Tao et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Permselective Graphene Oxide Membrane for Highly Stable and Anti-Self-Discharge Lithium-Sulfur Batteries

Jia-Qi Huang et al.

ACS NANO (2015)

Add to Collection

Article Chemistry, Multidisciplinary

A Lightweight TiO2/Graphene Interlayer, Applied as a Highly Effective Polysulfide Absorbent for Fast, Long-Life Lithium-Sulfur Batteries

Zhubing Xiao et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Multidisciplinary Sciences

Synthesis of three-dimensionally interconnected sulfur-rich polymers for cathode materials of high-rate lithium-sulfur batteries

Hoon Kim et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Physical

V2O5 Polysulfide Anion Barrier for Long-Lived Li-S Batteries

Wen Li et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Electrochemistry

Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries

Zhiyong Zhang et al.

ELECTROCHIMICA ACTA (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Challenges and Prospects of Lithium-Sulfur Batteries

Arumugam Manthiram et al.

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Add to Collection

Article Chemistry, Physical

Reactivation of dissolved polysulfides in Li-S batteries based on atomic layer deposition of Al2O3 in nanoporous carbon cloth

Xiaogang Han et al.

NANO ENERGY (2013)

Add to Collection

Article Chemistry, Applied

Synthesis of organized mesoporous alumina templated with ionic liquids

Nadezda Zilkova et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.