Related references
Note: Only part of the references are listed.Self-Polymerization of Monomer and Induced Interactions with Perovskite for Highly Performed and Stable Perovskite Solar Cells
Ruiman Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
Outstanding performance of electron-transport-layer-free perovskite solar cells using a novel small-molecule interlayer modified FTO substrate
Shuai Huang et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Scalable Fabrication of >90 cm2 Perovskite Solar Modules with >1000 h Operational Stability Based on the Intermediate Phase Strategy
Guoqing Tong et al.
ADVANCED ENERGY MATERIALS (2021)
Efficient perovskite solar cells via improved carrier management
Jason J. Yoo et al.
NATURE (2021)
On the wrong assignment of the XPS O1s signal at 531-532 eV attributed to oxygen vacancies in photo- and electro-catalysts for water splitting and other materials applications
Hicham Idriss
SURFACE SCIENCE (2021)
Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness
Qingshun Dong et al.
NATURE COMMUNICATIONS (2021)
Interfacial Passivation Engineering of Perovskite Solar Cells with Fill Factor over 82% and Outstanding Operational Stability on n-i-p Architecture
Bowen Yang et al.
ACS ENERGY LETTERS (2021)
Towards highly stable and efficient planar perovskite solar cells: Materials development, defect control and interfacial engineering
Huimin Xiang et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Reducing Surface Recombination Velocity of Methylammonium-Free Mixed-Cation Mixed-Halide Perovskites via Surface Passivation
Sarthak Jariwala et al.
CHEMISTRY OF MATERIALS (2021)
Mini-Review on Efficiency and Stability of Perovskite Solar Cells with Spiro-OMeTAD Hole Transport Layer: Recent Progress and Perspectives
Ganbaatar Tumen-Ulzii et al.
ENERGY & FUELS (2021)
Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation
Guang Yang et al.
NATURE PHOTONICS (2021)
Ionic Liquid Additive-Assisted Highly Efficient Electron Transport Layer-Free Perovskite Solar Cells
Chenhui Duan et al.
SOLAR RRL (2021)
Naphthalene diimide-based electron transport materials for perovskite solar cells
Mohammed A. Jameel et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
A naphthalene diimide side-chain polymer as an electron-extraction layer for stable perovskite solar cells
Khaled Al Kurdi et al.
MATERIALS CHEMISTRY FRONTIERS (2021)
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Fei Zhang et al.
ADVANCED ENERGY MATERIALS (2020)
Self-Assembled Ionic Liquid for Highly Efficient Electron Transport Layer-Free Perovskite Solar Cells
Haoliang Cheng et al.
CHEMSUSCHEM (2020)
Development of Dopant-Free Organic Hole Transporting Materials for Perovskite Solar Cells
Hong Duc Pham et al.
ADVANCED ENERGY MATERIALS (2020)
From Defects to Degradation: A Mechanistic Understanding of Degradation in Perovskite Solar Cell Devices and Modules
Sean P. Dunfield et al.
ADVANCED ENERGY MATERIALS (2020)
Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures
Mark V. Khenkin et al.
NATURE ENERGY (2020)
Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells
Gwisu Kim et al.
SCIENCE (2020)
Self-Assembled Monolayers as Interface Engineering Nanomaterials in Perovskite Solar Cells
Seo Yeon Kim et al.
ADVANCED ENERGY MATERIALS (2020)
Applications of Self-Assembled Monolayers for Perovskite Solar Cells Interface Engineering to Address Efficiency and Stability
Fawad Ali et al.
ADVANCED ENERGY MATERIALS (2020)
Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss
Mingyu Jeong et al.
SCIENCE (2020)
Surface passivation of perovskite film for efficient solar cells
Qi Jiang et al.
NATURE PHOTONICS (2019)
Simple, Robust, and Going More Efficient: Recent Advance on Electron Transport Layer-Free Perovskite Solar Cells
Like Huang et al.
ADVANCED ENERGY MATERIALS (2019)
Universal Work Function of Metal Oxides Exposed to Air
Kevin J. Rietwyk et al.
ADVANCED MATERIALS INTERFACES (2019)
LiTFSI-Free Spiro-OMeTAD-Based Perovskite Solar Cells with Power Conversion Efficiencies Exceeding 19%
Boer Tan et al.
ADVANCED ENERGY MATERIALS (2019)
Fundamentals of TiO2 Photocatalysis: Concepts, Mechanisms, and Challenges
Qing Guo et al.
ADVANCED MATERIALS (2019)
Efficient and Stable Inverted Perovskite Solar Cells Incorporating Secondary Amines
Hao Chen et al.
ADVANCED MATERIALS (2019)
Enhanced thermal stability of electron transport layer-free perovskite solar cells via interface strain releasing
Peng Zhang et al.
JOURNAL OF POWER SOURCES (2019)
Low-Temperature In Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells
Wanpei Hu et al.
ADVANCED MATERIALS (2019)
Reducing Surface Recombination Velocities at the Electrical Contacts Will Improve Perovskite Photovoltaics
Jian Wang et al.
ACS ENERGY LETTERS (2019)
Insulated Interlayer for Efficient and Photostable Electron-Transport-Layer-Free Perovskite Solar Cells
Pengjun Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Nonfullerene Electron Transporting Material Based on Naphthalene Diimide Small Molecule for Highly Stable Perovskite Solar Cells with Efficiency Exceeding 20%
Su-Kyo Jung et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Carrier Dynamics Engineering for High-Performance Electron-Transport-Layer-free Perovskite Photovoltaics
Qiwei Han et al.
CHEM (2018)
Efficient and Air-Stable Mixed-Cation Lead Mixed-Halide Perovskite Solar Cells with n-Doped Organic Electron Extraction Layers
Zhiping Wang et al.
ADVANCED MATERIALS (2017)
Efficient and Stable Perovskite Solar Cells Prepared in Ambient Air Based on Surface-Modified Perovskite Layer
Chang Liu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
Outstanding Performance of Hole-Blocking Layer-Free Perovskite Solar Cell Using Hierarchically Porous Fluorine-Doped Tin Oxide Substrate
Haejun Yu et al.
ADVANCED ENERGY MATERIALS (2017)
4-Tert-butylpyridine Free Organic Hole Transporting Materials for Stable and Efficient Planar Perovskite Solar Cells
Bo Xu et al.
ADVANCED ENERGY MATERIALS (2017)
Naphthalene diimide-based small molecule acceptors for organic solar cells
Kira Rundel et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Dual functions of interface passivation and ndoping using 2,6-dimethoxypyridine for enhanced reproducibility and performance of planar perovskite solar cells
Youyu Jiang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Toward All Room-Temperature, Solution- Processed, High-Performance Planar Perovskite Solar Cells: A New Scheme of Pyridine-Promoted Perovskite Formation
Hong Zhang et al.
ADVANCED MATERIALS (2017)
Large Grain-Based Hole-Blocking Layer-Free Planar-Type Perovskite Solar Cell with Best Efficiency of 18.20%
Haejun Yu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Effect of Selective Contacts on the Thermal Stability of Perovskite Solar Cells
Xing Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Highly Efficient Electron-Selective Layer Free Perovskite Solar Cells by Constructing Effective p-n Heterojunction
Peng Cui et al.
SOLAR RRL (2017)
Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells
Jin-Wook Lee et al.
ACCOUNTS OF CHEMICAL RESEARCH (2016)
Toward Revealing the Critical Role of Perovskite Coverage in Highly Efficient Electron-Transport Layer-Free Perovskite Solar Cells: An Energy Band and Equivalent Circuit Model Perspective
Like Huang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Aluminum-Doped Zinc Oxide as Highly Stable Electron Collection Layer for Perovskite Solar Cells
Xingyue Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Functional Naphthalene Diimides: Synthesis, Properties, and Applications
Mohammad Al Kobaisi et al.
CHEMICAL REVIEWS (2016)
High resolution core level spectroscopy of hydrogen-terminated (100) diamond
A. K. Schenk et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2016)
Fabrication of freestanding silk fibroin films containing Ag nanowires/NaYF4:Yb,Er nanocomposites with metal-enhanced fluorescence behavior
Bing Zhao et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
David P. McMeekin et al.
SCIENCE (2016)
The oxidation and surface speciation of indium and indium oxides exposed to atmospheric oxidants
Zachary M. Detweiler et al.
SURFACE SCIENCE (2016)
Interfacial electron accumulation for efficient homo-junction perovskite solar cells
Seulki Song et al.
NANO ENERGY (2016)
Photoluminescence Lifetimes Exceeding 8 μs and Quantum Yields Exceeding 30% in Hybrid Perovskite Thin Films by Ligand Passivation
Dane W. deQuilettes et al.
ACS ENERGY LETTERS (2016)
Enhancing Thermal Stability and Lifetime of Solid-State Dye-Sensitized Solar Cells via Molecular Engineering of the Hole-Transporting Material Spiro-OMeTAD
Tadas Malinauskas et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells
Weijun Ke et al.
NATURE COMMUNICATIONS (2015)
Charge selective contacts, mobile ions and anomalous hysteresis in organic-inorganic perovskite solar cells
Ye Zhang et al.
MATERIALS HORIZONS (2015)
Enhanced Photoluminescence and Solar Cell Performance via Lewis Base Passivation of Organic Inorganic Lead Halide Perovskites
Nakita K. Noel et al.
ACS NANO (2014)
Biocatalytic Self-Assembly of Supramolecular Charge-Transfer Nanostructures Based on n-Type Semiconductor-Appended Peptides
Siva Krishna Mohan Nalluri et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
Effects of Surface Blocking Layer of Sb2S3 on Nanocrystalline TiO2 for CH3NH3PbI3 Perovskite Solar Cells
Seigo Ito et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Compact Layer Free Perovskite Solar Cells with 13.5% Efficiency
Dianyi Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Stability of reference masses: VI. Mercury and carbonaceous contamination on platinum weights manufactured at a similar time as the international and national prototype kilograms
Peter J. Cumpson et al.
METROLOGIA (2013)
Doping efficiency and energy-level scheme in C60F48-doped zinc-tetraphenylporphyrin films
Yaou Smets et al.
ORGANIC ELECTRONICS (2013)
Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells
Tomas Leijtens et al.
NATURE COMMUNICATIONS (2013)
Characterization of the long-term stability of mass standards stored in vacuum by weighing and surface analysis
Stuart Davidson
METROLOGIA (2012)
A New Architecture for Transparent Electrodes: Relieving the Trade-Off Between Electrical Conductivity and Optical Transmittance
Ping Kuang et al.
ADVANCED MATERIALS (2011)
Microwave-Assisted Synthesis of Naphthalenemonoimides and N-Desymmetrized Naphthalenediimides
Koujiro Tambara et al.
JOURNAL OF ORGANIC CHEMISTRY (2011)
Consensus stability testing protocols for organic photovoltaic materials and devices
Matthew O. Reese et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
A surface science perspective on TiO2 photocatalysis
Michael A. Henderson
SURFACE SCIENCE REPORTS (2011)
Phosphonic acid modification of indium-tin oxide electrodes: Combined XPS/UPS/contact angle studies
Sergio A. Paniagua et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2008)
Characterization of indium-tin oxide interfaces using X-ray photoelectron spectroscopy and redox processes of a chemisorbed probe molecule: Effect of surface pretreatment conditions
C Donley et al.
LANGMUIR (2002)
Synthesis and characterization of [3,3]- and [3,4]-perinophane
E Buncel et al.
TETRAHEDRON LETTERS (2001)
Modelling polycrystalline semiconductor solar cells
M Burgelman et al.
THIN SOLID FILMS (2000)
Share Paper
