☆ 4.7 Article

Synthetic Strategy of Si@void@C Nanoparticles for High- Performance Lithium-Ion Battery Anodes

ACS APPLIED ENERGY MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Scalable Synthesis of Pore-Rich Si/C@C Core-Shell-Structured Microspheres for Practical Long-Life Lithium-Ion Battery Anodes

Weili An et al.

Summary: In this study, a large-scale synthesis of a micro/nanostructured pore-rich Si/C microsphere was reported, which showed high porosity and stability, making it a promising anode material for high-energy-density lithium-ion batteries. The material displayed excellent cycle performance and capacity retention due to its structural advantages.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Matryoshka-type carbon-stabilized hollow Si spheres as an advanced anode material for lithium-ion batteries

Huimin Wu et al.

Summary: In this study, carbon-stabilized hollow silicon spheres were synthesized using an aluminothermic reduction and calcination process, and their potential as anode materials for lithium-ion batteries was investigated. The results showed that the synthesized Si/C/Si/C anode materials exhibited unique structures with preserved amorphous region and porous structures in the silicon layers. The anode displayed high initial specific capacity and good cycling performance.

CHINESE CHEMICAL LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Simple preparation of Si/N-doped carbon anodes from photovoltaic industry waste for lithium-ion batteries

Yanchen Ma et al.

Summary: The study introduces the preparation of Si/N-doped carbon composite anode materials using recycled Si waste from the photovoltaic industry. The coating of Si micro/nano-plates with N-doped carbon facilitates electron transfer, inhibits volume expansion, and enhances the stability of the composites. This approach shows promising results in terms of high discharge capacity and cycling performance for the next generation of LIBs.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Nitrogen-plasma doping of carbon film for a high-quality layered Si/C composite anode

Z. D. Zhang et al.

Summary: This study introduces a novel nitrogen-plasma doping route to modify the carbon film in a Si/C composite anode, significantly improving its electrochemical performance including initial coulombic efficiency, cycle stability, and specific capacity. This approach opens up new possibilities for achieving high energy density lithium ion batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Designed Formation of Yolk-Shell-Like N-Doped Carbon-Coated Si Nanoparticles by a Facile Method for Lithium-Ion Battery Anodes

Yanbin Wei et al.

Summary: Silicon is a promising anode material for lithium-ion batteries due to its high capacity, but its practical application is hindered by the large volume change and poor conductivity. By designing and preparing yolk-shell-like N-doped carbon-coated Si nanoparticles, these issues can be resolved and ideal Si-based composite materials can be constructed.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Si/C composite embedded nano-Si in 3D porous carbon matrix and enwound by conductive CNTs as anode of lithium-ion batteries

Jiao Peng et al.

Summary: A composite architecture based on nano Si embedded into three-dimensional porous N-doped carbon and combined with carbon nanotubes was designed and constructed, achieving significant improvement in the electrochemical performance of the Si anode for lithium-ion batteries.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2022)

Add to Collection

Article Chemistry, Physical

Dual carbon and void space confined SiOx/C@void@Si/C yolk-shell nanospheres with high-rate performances and outstanding cyclability for lithium-ion batteries anodes

Wenyan Chen et al.

Summary: A novel dual carbon confined SiOx/C@void@Si/C yolk-shell monodisperse nanosphere with void space has been fabricated, which can effectively accommodate the volume expansion of silicon materials and enhance the electrical conductivity of composites. The optimized anode exhibits excellent cycle stability and reversible capacity, showing potential for application.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

An interconnected and scalable hollow Si-C nanospheres/graphite composite for high-performance lithium-ion batteries

Jiafeng Gao et al.

Summary: In this study, an interconnected hollow Si-C nanospheres/graphite composite was fabricated to improve the performance of Si anode. The composite anode exhibited high specific capacity, excellent rate performance, and cycling stability, attributed to the high electrical conductivity and buffering effect of graphite, as well as the good compatibility and uniform distribution of hollow Si-C nanospheres and graphite.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Towards a better understanding of the degradation mechanisms of Li-ion full cells using Si/C composites as anode

Mariana Gutierrez et al.

Summary: This study used carbon-coated silicon nanoparticles to prepare Si/C composites with different silicon contents, and demonstrated the clear improvement of electrochemical performances by adding graphite. The degradation phenomena of the anodes while cycling with NMC622 were also observed.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Chemistry, Physical

Molecular cooking: Amino acids trap silicon in carbon matrix to boost lithium-ion storage

Tao Meng et al.

Summary: A facile strategy was developed for the preparation of high-performance silicon@carbon (Si@C) anode, involving the use of protein molecules in egg white to modify silicon nanoparticles and the in situ carbonization to form a functional carbon skeleton. The resulting hybrid composite exhibited superior rate capability and long-term stability due to the outer N-doped carbon layer providing electrical conductivity and enhanced interface stability, and the inner SiO(x) layer optimizing Li-ion transport path.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Environmentally Friendly Single-Step Laser Synthesis of Three-Dimensional C-Si-SiC Micro/Nanoporous Composite Lithium-ion Battery Electrodes and Electrochemical Performance

Dongxu Cheng et al.

Summary: In this study, a three-dimensional (3D) C-Si-SiC micro/nanoporous composite Li-ion battery (LIB) electrode was synthesized using a continuous-wave fiber laser on a copper foil from pure SiC powder. The volcano and fishnet structure electrodes exhibited higher reversible charge capacities and cycling performance. The results suggest that this method can improve the performance of SiC electrodes.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Electrochemistry

Synthesis of 3D stacked silicon nanosheets via electrochemical reduction of attapulgite in molten salt for high-performance lithium-ion batteries anode

Qiang Yu et al.

Summary: This study reports a scalable method for synthesizing stacked silicon nanosheets (s-SiNS) by electro-deoxidation of attapulgite and an acid etching process. The s-SiNS anode shows high specific capacity, high initial coulombic efficiency, high rate capability, and good cyclability.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Electrochemistry

Tailoring of a reinforcing and artificial self-assembled alkyl sulfonic acid layer electrolyte interphase on silicon as an anode for high-energy-density lithium-ion batteries

Alem Gebrelibanos Hailu et al.

Summary: This study improves the performance of silicon anodes by using a self-assembled alkyl sulfonic acid reinforcement structure as an artificial solid electrolyte interphase (SEI) and strong siloxane bonds between silicon and 3-mercaptopropyl trimethoxysilane (MPTMS). The silicon-SAASA electrode exhibits high discharge capacity, excellent rate performance, and a high lithium-ion diffusion coefficient, effectively preventing fragmentation of silicon particles and repeated growth of a thick and high-impedance SEI layer.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Microscopy

Effect of specimen processing for transmission electron microscopy on lattice spacing variation in Si specimens

Keita Kobayashi et al.

Summary: The variation in the (220) lattice spacing of Si due to specimen processing for TEM has been experimentally evaluated, showing that the processing conditions and measurement location can significantly affect the measurement uncertainty in sub-nanometer metrology using TEM.

ULTRAMICROSCOPY (2022)

Add to Collection

Review Chemistry, Physical

Prelithiation Bridges the Gap for Developing Next-Generation Lithium-Ion Batteries/Capacitors

Feifei Li et al.

Summary: This review summarizes the emerging anode and cathode prelithiation techniques in the advanced lithium-ion batteries field, along with strategies for manufacturing-compatible and scalable prelithiation. Prelithiation is crucial for compensating the initial capacity loss, enhancing full cell cycling performance, and propelling the commercialization of advanced LIBs/LICs.

SMALL METHODS (2022)

Add to Collection

Review Energy & Fuels

Overview of batteries and battery management for electric vehicles

Wei Liu et al.

Summary: The popularization of electric vehicles is an effective solution to combat the climate crisis. This article reviews the evolution and challenges of EV batteries and battery management technologies, and envisions the future development trends and opportunities.

ENERGY REPORTS (2022)

Add to Collection

Article Chemistry, Physical

Mild strategy for generating rich void space for nano-Si/C composites to accommodate the large volume expansion during alloying/dealloying for lithium-ion batteries

Na Zhang et al.

Summary: Silicon-based materials have shown promise as high-capacity anodes for lithium-ion batteries, and a Si/carbon-based anode material with rich void space (Si@void@C) was prepared using calcium carbonate as a template in this study. The void space accommodated volume changes during cycling processes, leading to excellent specific capacity and high-capacity retention. The comprehensive performance of Si@void@C was significantly better than other electrodes, making it a promising high-capacity anode for next-generation LIBs.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Microscale Silicon-Based Anodes: Fundamental Understanding and Industrial Prospects for Practical High-Energy Lithium-Ion Batteries

Guanjia Zhu et al.

Summary: This review discusses the challenges in bridging the gap between industrial application and scientific research in Si-based batteries. Microscale design of Si-based electrodes with densified microstructure is seen as a key solution. Additionally, practical metrics and improvement strategies beyond active material are explored.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Yolk-shell Si@void@C composite with Chito-oligosaccharide as a C-N precursor for high capacity anode in lithium-ion batteries

Tan Shao et al.

Summary: The yolk-shell structure of Si@void@C anode for lithium ion batteries with Chito-oligosaccharide (COS) as carbon and nitrogen source was successfully prepared. It exhibits superior cycle stability and high rate performance due to the higher porosity of COS derived carbon, promotion of wettability of electrode interface by amino groups from COS, and effective protection of the silicon core ball from electrolyte corrosion by the outer carbon shell.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Yolk-void-shell Si-C nano-particles with tunable void size for high-performance anode of lithium ion batteries

Chaoye Zhu et al.

Summary: The yolk-void-shell Si-C anode presents enhanced performance in lithium storage capacity and stability, as well as inhibiting volume expansion and electrolyte decomposition. Interfaces between Si@Void@C particles and rGO sheets also facilitate electron conduction.

NANOTECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Facile and Scalable Synthesis of Si@void@C Embedded in Interconnected 3D Porous Carbon Architecture for High Performance Lithium-Ion Batteries

Jingyun Ma et al.

Summary: Si-based materials have great potential as an excellent anode material for Li-ion batteries, but scalable synthesis remains a challenge. A novel water-in-oil microemulsion process was used to produce yolk-shell Si@void@C, showing excellent electrochemical performance due to its unique structure.

PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION (2021)

Add to Collection

Article Chemistry, Physical

Si@C/TiO2@C/Hollow-C Nanocomposite as a Lithium-Ion Battery Anode Produced by Refining Silicon and Ti-6Al-4V Residuals

Yan Li et al.

Summary: The Si@C/TiO2@C/Hollow-C anode materials prepared by mixing and carbonizing SiNPs and TC4NPs in different proportions provide ample space for the volume expansion of silicon while reducing transfer impedance. The anatase TiO2 in TC4NPs helps relieve volume expansion and enhance electrical conductivity during charge/discharge, leading to excellent rate performance and 92% reversible capacity retention after cycling at higher current densities.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Silicon Microreactor as a Fast Charge, Long Cycle Life Anode with High Initial Coulombic Efficiency Synthesized via a Scalable Method

Qianran He et al.

Summary: A scalable synthesis method for high-performance silicon microreactors has been developed, which can achieve high specific capacity, ultrafast charge/discharge, high initial Coulombic efficiency, and long cycle life simultaneously. The silicon microreactors, created by high-energy ball milling, contain nanochannel voids that accommodate volume expansion and provide fast Li-ion diffusion pathways.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Silicon-Based Lithium Ion Battery Systems: State-of-the-Art from Half and Full Cell Viewpoint

Junpo Guo et al.

Summary: Lithium-ion batteries have been dominated by silicon-based materials as promising alternatives to graphite anodes due to their high theoretical capacities, but face challenges such as volume changes and side reactions. Solutions like preparation methods, structure optimizations, and development of new electrolytes, binders, and separators have been proposed. The introduction of pre-lithiation technology shows potential in improving energy densities and lifetime of Si-based full cells.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Anomalous Si-based composite anode design by densification and coating strategies for practical applications in Li-ion batteries

Moon Kyu Cho et al.

Summary: By optimizing the design of Si/C composite anodes, modifying the surface with chemical vapor deposition, and doping with graphite, the performance of lithium-ion batteries can be significantly improved in terms of cycle life and efficiency.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Electrochemistry

Achieving fully reversible conversion in Si anode for lithium-ion batteries by design of pomegranate-like Si@C structure

Chong Han et al.

Summary: Pomegranate-like Si@C microspheres exhibit excellent electrochemical performance, stabilizing the structure of Si particles and improving electrochemical properties. This unique structure enables the sample to achieve high Coulombic efficiency and stable cycling.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Lattice-Coupled Si/MXene Confined by Hard Carbon for Fast Sodium-Ion Conduction

Li Gou et al.

Summary: This study developed a 3D architecture composed of silicon (Si) nanoparticles coupled with MXene layers as an anode material for sodium-ion batteries (SIBs). By combining silicon with MXene and hard carbon, the material demonstrated enhanced capacity, cycling stability, and rate performance.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Challenges and Recent Progress on Silicon-Based Anode Materials for Next-Generation Lithium-Ion Batteries

Chengzhi Zhang et al.

Summary: The article focuses on the importance of silicon-based anodes for high-energy density lithium-ion batteries and the challenges they face, presenting a series of solutions and summarizing the progress made in this area.

SMALL STRUCTURES (2021)

Add to Collection

Review Electrochemistry

Tailoring the structure of silicon-based materials for lithium-ion batteries via electrospinning technology

Aoming Huang et al.

Summary: Silicon shows promise as an anode material for lithium-ion batteries, but challenges like volume variation and low conductivity still need to be addressed. Designing micro-nano structures and composites of heterogeneous materials are effective strategies. Electrospinning technology can help construct unique structures to solve issues with Si-based anodes.

ESCIENCE (2021)

Add to Collection

Article Electrochemistry

Self-assembly of hierarchical Ti3C2Tx-CNT/SiNPs resilient films for high performance lithium ion battery electrodes

Dong Cao et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Review Engineering, Environmental

Recent progress of structural designs of silicon for performance -enhanced lithium -ion batteries

Ying Qi et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Chemistry, Physical

Review on comprehending and enhancing the initial Coulombic efficiency of anode materials in lithium-ion/sodium-ion batteries

Xin Li et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Green Design of Si/SiO2/C Composites as High-Performance Anodes for Lithium-Ion Batteries

Wei Wu et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Electrochemistry

Hierarchical void structured Si/PANi/C hybrid anode material for high-performance lithium-ion batteries

Ge Mu et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Construction of Structure-Tunable Si@Void@C Anode Materials for Lithium-Ion Batteries through Controlling the Growth Kinetics of Resin

Fei Wang et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Physical

Scalable preparation of porous nano-silicon/TiN@carbon anode for lithium-ion batteries

Peng Zhang et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

ZIF-8-Templated Hollow Cubelike Si/SiO2@C Nanocomposites for Superior Lithium Storage Performance

Hao Wang et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Rational Design of Si@SiO2/C Composites Using Sustainable Cellulose as a Carbon Resource for Anodes in Lithium-Ion Batteries

Dazhi Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Lignin derived Si@C composite as a high performance anode material for lithium ion batteries

Leilei Du et al.

SOLID STATE IONICS (2018)

Add to Collection

Article Chemistry, Physical

Watermelon-Inspired Si/C Microspheres with Hierarchical Buffer Structures for Densely Compacted Lithium-Ion Battery Anodes

Quan Xu et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Electrochemistry

Synthesis of Robust Silicon Nanoparticles@Void@Graphitic Carbon Spheres for High-Performance Lithium-Ion-Battery Anodes

Xiaomei Ma et al.

CHEMELECTROCHEM (2017)

Add to Collection

Article Electrochemistry

Designing Si/porous-C composite with buffering voids as high capacity anode for lithium-ion batteries

Lu Yue et al.

ELECTROCHIMICA ACTA (2014)

Add to Collection

Article Electrochemistry

Silicon@carbon hollow core-shell heterostructures novel anode materials for lithium ion batteries

Xiang-yang Zhou et al.

ELECTROCHIMICA ACTA (2013)

Add to Collection

Article Chemistry, Multidisciplinary

A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes

Nian Liu et al.

NANO LETTERS (2012)

Add to Collection

Review Chemistry, Multidisciplinary

Challenges in the development of advanced Li-ion batteries: a review

Vinodkumar Etacheri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Chemistry, Physical

Amorphous carbon-coated silicon nanocomposites: A low-temperature synthesis via spray pyrolysis and their application as high-capacity anodes for lithium-ion batteries

See How Ng et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2007)

Add to Collection

Article Electrochemistry

Structural changes in silicon anodes during lithium insertion/extraction

MN Obrovac et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.