Related references
Note: Only part of the references are listed.
Article
Nanoscience & Nanotechnology
Navid Habibi et al.
Summary: In this study, an ultralow density, photothermal, superhydrophobic, and thermally conductive polyurethane/polyaniline/hexagonal boron nitride@Fe3O4/polyacrylicoleic acid resin sponge was fabricated for the separation of high-viscosity crude oil from water. The sponge exhibited excellent absorption capacity and stability, making it a promising tool for the removal of organic solvents and highly viscous crude oil.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Multidisciplinary
Chen Fu et al.
Summary: In this study, a free-standing carbon nanotube (CNT)-based aerogel film with a laminated porous structure and high electrical conductivity was prepared using a laminated structural engineering strategy. The film showed a large specific surface area and the highest specific shielding effectiveness among reported aerogel-based materials. It also exhibited exceptional Joule heating performance, making it suitable for lightweight applications such as EMI shielding and wearable heating.
Article
Engineering, Environmental
Zhiyong Liu et al.
Summary: Rapid and efficient clean-up of viscous crude oil spills remains a global challenge. In this study, a solar-heated ink modified plant fiber sponge (PFS@GC@PDMS) was designed as a high-performance absorbent for crude oil clean-up and recovery. The modified sponge exhibited excellent compressibility, hydrophobicity, and oil absorption capacity. It can be used for continuous absorption of oil spills on the water surface.
JOURNAL OF HAZARDOUS MATERIALS
(2022)
Article
Engineering, Environmental
Wei Zhao et al.
Summary: This article introduces a formaldehyde-free phosphorus-containing polysiloxane coating for flame retardancy of EPS foam. The coating acts as both an adhesive and a flame retardant, providing durable thermal insulation and forming a graphited char layer to isolate oxygen, heat, combustible compounds, and smoke particles during combustion. EPS composites treated with this coating exhibit high fire safety and excellent comprehensive performance.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Bo-Wen Liu et al.
Summary: In this study, a bidirectionally oriented multi-walled carbon nanotubes-reinforced chitosan carbon aerogel (CS-MWCNT) material with superelasticity, high electromagnetic interference shielding, thermal insulation, and infrared stealth properties was reported. The material showed excellent performance under extreme temperature conditions and exhibited the ability to recover its shape.
Article
Chemistry, Physical
Yushan Li et al.
Summary: This study proposes a strategy to reduce the viscosity of crude oil by using solar-assisted chemical emulsifiers, and modify commercial sponges to achieve rapid adsorption and efficient recovery of crude oil. The modified sponge exhibits a 10% increase in absorption capacity and a three order of magnitude increase in viscous crude oil absorption rate compared to a commercial polyurethane sponge.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Nanoscience & Nanotechnology
Shu-Liang Li et al.
Summary: This study presents a multifunctional biomass aerogel with lamella nanostructures, showing outstanding elasticity and absorption performance even under extreme conditions. The aerogel maintains high absorption capacity and excellent thermal insulation performance at extreme temperatures.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Nanoscience & Nanotechnology
Zhangdi Li et al.
Summary: This study presents a Joule-heated super-hydrophobic flower-like copper foam sorbent for rapid cleanup of viscous crude oil spills, showcasing outstanding water repellency and thermal conductivity. The sorbent is able to reduce the viscosity of crude oil, increase oil absorption rate, and achieve continuous and quick cleanup of crude oil under in situ pumping force.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Engineering, Environmental
Chenyang Cai et al.
Summary: This study introduces a novel wood-inspired MXene aerogel material with excellent superhydrophobicity, mechanical superelasticity, and efficient photothermal conversion ability.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Nanoscience & Nanotechnology
Hai-Gang Shi et al.
Summary: The novel flame-retardant photothermal conversion nanocoating can rapidly heat the foam under 1 sun irradiation, with high absorption capacity and rate, effectively avoiding oil spill hazards.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Engineering, Chemical
Ruiqi Li et al.
Summary: A PDMS/PANI-modified melamine sponge with a robust superhydrophobic coating was constructed by simple polymerization and dip coating, demonstrating superior photothermal conversion efficiency and excellent absorption capacity for viscous crude oil spills.
SEPARATION AND PURIFICATION TECHNOLOGY
(2021)
Article
Chemistry, Multidisciplinary
Xiaoshuai Han et al.
Summary: Inspired by nacre, a lightweight and high-performance cellulosic material with good mechanical properties was fabricated. It shows promising applications in new energy vehicles and the aerospace industry, providing a new pathway for designing high-performance bio-based structural materials.
CHINESE CHEMICAL LETTERS
(2021)
Article
Materials Science, Multidisciplinary
Qingtao Zeng et al.
Summary: In this study, superhydrophobic foam made from biodegradable poly(lactic acid) was successfully fabricated by incorporating reduced graphene oxide. The foam exhibited excellent water repellency and electrothermal conversion capability, allowing for efficient separation of oil-water mixtures and cleaning of viscous crude oil.
JOURNAL OF MATERIALS SCIENCE
(2021)
Article
Materials Science, Ceramics
Ze Zhang et al.
Summary: The properties of linear polyimide aerogels were enhanced by introducing the network structure of polyvinylpolymethylsiloxane, resulting in doubly cross-linked polyimide-PVPMS structure with resilience and fire-retardant properties. The introduced PVPMS network structure weakened the effect of PI rigidity on LPAs, and played a significant role in the physical properties of PPCAs, allowing for the use of lower cost monomers in large-scale production.
JOURNAL OF NON-CRYSTALLINE SOLIDS
(2021)
Article
Chemistry, Physical
Lu-An Shi et al.
Summary: Introducing heating function to oil sorbents enables fast cleanup of viscous crude oil spills in situ. Carbonized melamine-formaldehyde sponges (CMSs) exhibited superior heating performance and can be mass fabricated through a non-polluting pyrolysis process. The conductive CMSs can heat up quickly and significantly improve the efficiency and oil sorption capacity during oil spill remediation.
Article
Chemistry, Physical
Pengfei Liu et al.
Summary: Anisotropic graphene aerogels with highly aligned porous structure were successfully fabricated using a calcium ion-assisted unidirectional-freezing approach. These aerogels exhibit excellent sensitivity as piezoresistive sensors, as well as prominent adsorption capacity for organic pollutants and enhanced viscosity reduction for crude oil.
Article
Chemistry, Physical
Ting Wang et al.
Summary: This study presents a smart temperature-responsive self-intumescent strategy for organic aerogels, which can rapidly form stable porous carbon at high temperatures to achieve excellent fire resistance and high-temperature thermal insulation. The aerogel can expand in real time in response to temperature/fire, resisting various heat conditions and exhibiting the best high-temperature insulating performance ever reported.
CHEMISTRY OF MATERIALS
(2021)
Article
Materials Science, Composites
Zhiyong Liu et al.
Summary: A hydrophobic plant fiber sponge (PFS) modified with hexamethyldisilazane (HMDS) shows high oil absorptive capacity and selectivity, demonstrating potential in oil/water separation and organic solvents removal.
COMPOSITES COMMUNICATIONS
(2021)
Article
Materials Science, Composites
Hui Ding et al.
Summary: The hydrophobic lignin nanoparticles (LNP) were synthesized through a synchronous modification process and used to prepare bio-based PLA foams with high hydrophobicity and porosity. These composite foams showed strong absorption capacities towards various oil/organic solvents and exhibited good recyclability.
COMPOSITES COMMUNICATIONS
(2021)
Article
Chemistry, Physical
Haifeng Niu et al.
Summary: This study developed an elastic carbon sorbent through the pyrolysis of melamine foam, which possesses light weight, superhydrophobicity, high mechanical strength, and efficient oil uptake capability. The sorbent can significantly reduce the viscosity of heavy crude oil under mild sunlight exposure or low voltage, offering a fast cleanup approach for accidental oil spills under all weather conditions. Overall, the carbonized melamine foam provides an ideal material solution for large-scale crude oil cleanup through its versatile and efficient cleanup approaches.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Article
Chemistry, Physical
Seema Singh et al.
Article
Chemistry, Multidisciplinary
Chang Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2020)
Article
Materials Science, Composites
A. Sittinun et al.
COMPOSITES COMMUNICATIONS
(2020)
Article
Materials Science, Composites
Yi Qin et al.
COMPOSITES SCIENCE AND TECHNOLOGY
(2020)
Article
Materials Science, Multidisciplinary
Jin Yang et al.
MATERIALS & DESIGN
(2020)
Article
Materials Science, Composites
Peng Lv et al.
COMPOSITES COMMUNICATIONS
(2020)
