☆ 4.7 Article

Tailoring the Cs/Br Ratio for Efficient and Stable Wide-Bandgap Perovskite Solar Cells

SOLAR RRL (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Constructing Monolithic Perovskite/Organic Tandem Solar Cell with Efficiency of 22.0% via Reduced Open-Circuit Voltage Loss and Broadened Absorption Spectra

Shucheng Qin et al.

Summary: The photovoltaic performance of perovskite/organic tandem solar cells has been improved by reducing nonradiative charge recombination and broadening the absorption spectra range. The overall efficiency of the monolithic TSC reaches 22.0%, showing promise for future commercialization.

ADVANCED MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

All-perovskite tandem solar cells with improved grain surface passivation

Renxing Lin et al.

Summary: Researchers have developed ammonium-cation-passivated Pb-Sn perovskites with long diffusion lengths, enabling high-efficiency all-perovskite tandem solar cells. By enhancing the adsorption of the passivator using a stronger surface-passivator interaction, the carrier diffusion length within Pb-Sn perovskites is doubled, resulting in an efficiency of over 22%. The certified efficiency of 26.4% achieved in the all-perovskite tandem solar cells exceeds that of the best-performing single-junction perovskite solar cells.

NATURE (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Downward Homogenized Crystallization for Inverted Wide-Bandgap Mixed-Halide Perovskite Solar Cells with 21% Efficiency and Suppressed Photo-Induced Halide Segregation

Yiting Zheng et al.

Summary: This study introduces a new material called ABF into the mixed-halide precursor, and uses a downward homogenized crystallization strategy to suppress the halide phase separation during perovskite crystallization, thereby improving the efficiency and stability of solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Ligand-Anchoring-Induced Oriented Crystal Growth for High-Efficiency Lead-Tin Perovskite Solar Cells

Nan Yan et al.

Summary: The narrow bandgap Pb-Sn alloyed perovskite solar cell with (100) orientation shows significantly reduced trap density and achieves a champion power conversion efficiency of 20.03%. The use of alkyl diamine as a nucleation agent can modulate the growth preference of Pb-Sn perovskite to proceed along the (100) orientation, resulting in improved optoelectronic properties. These findings provide a practicable strategy to induce preferential growth of perovskite material for better performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Steric Engineering Enables Efficient and Photostable Wide-Bandgap Perovskites for All-Perovskite Tandem Solar Cells

Jin Wen et al.

Summary: Steric engineering is used to obtain high-quality and photostable wide-bandgap perovskites suitable for all-perovskite tandem solar cells. By alloying dimethylammonium and chloride, wide bandgaps are obtained with lower bromide contents and minimized lattice strain and trap densities. The resulting WBG perovskite solar cells exhibit significantly improved performance and photostability, with a stabilized power conversion efficiency of 26.0% in all-perovskite tandem solar cells.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

CsPbCl3-Cluster-Widened Bandgap and Inhibited Phase Segregation in a Wide-Bandgap Perovskite and its Application to NiOx-Based Perovskite/Silicon Tandem Solar Cells

Renjie Li et al.

Summary: By widening the bandgap and controlling the redox chemistry at the perovskite/NiOx interface through the addition of CsPbCl3-clusters and CsCl, the study improved the efficiency of p-i-n PSCs and successfully fabricated highly efficient and stable NiOx-based perovskite/silicon tandem solar cells.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Strain Modulation for Light-Stable n-i-p Perovskite/Silicon Tandem Solar Cells

Lina Wang et al.

Summary: This research presents a strain modulation strategy to fabricate light-stable perovskite/silicon tandem solar cells. By converting residual tensile strain to compressive strain, the cells achieve a high power conversion efficiency and improved light stability.

ADVANCED MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Scalable processing for realizing 21.7%-efficient all-perovskite tandem solar modules

Ke Xiao et al.

Summary: Efficient all-perovskite tandem solar modules were fabricated using tunable cesium ratio of mixed-halide perovskite and an electrically conductive conformal diffusion barrier. These modules demonstrated high efficiency and stability even after continuous operation.

SCIENCE (2022)

Add to Collection

Article Optics

Defect engineering in wide-bandgap perovskites for efficient perovskite-silicon tandem solar cells

Guang Yang et al.

Summary: By employing tribromide ions to reduce charge recombination, efficient wide-bandgap mixed-halide perovskite-silicon tandem solar cells with an efficiency of up to 28.6% are reported, while also enhancing device stability.

NATURE PHOTONICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells

Tiankai Zhang et al.

Summary: This study proposes a new doping strategy for perovskite solar cells, using stable organic radicals as dopants and ionic salts as doping modulators. The strategy improves the performance and stability of the devices and could inspire further optimization in other optoelectronic devices.

SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

Efficient and stable perovskite-silicon tandem solar cells through contact displacement by MgFx

Jiang Liu et al.

Summary: The performance of perovskite solar cells with inverted polarity can be improved by adding a MgFx interlayer at the perovskite/C-60 interface. This interlayer facilitates efficient electron extraction, reduces nonradiative recombination, and exhibits good stability under damp-heat conditions.

SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Phase-Stable Wide-Bandgap Perovskites for Four-Terminal Perovskite/Silicon Tandem Solar Cells with Over 30% Efficiency

Yuxin Yao et al.

Summary: The addition of ammonium diethyldithiocarbamate (ADDC) as an additive in precursor solution can reduce phase segregation in wide-bandgap perovskite solar cells (PSCs), improving their phase stability and operation stability. This leads to highly efficient solar cells with a tailored bandgap and a groundbreaking open-circuit voltage (V-OC).

SMALL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Rational Surface-Defect Control via Designed Passivation for High-Efficiency Inorganic Perovskite Solar Cells

Xiaojing Gu et al.

Summary: Iodine vacancies and undercoordinated Pb2+ are the main causes of nonradiative charge recombination in all-inorganic perovskite films, while passivation with histamine (HA) significantly reduces surface trap density and prolongs charge lifetime, leading to an increased solar cell efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilized tilted-octahedra halide perovskites inhibit local formation of performance-limiting phases

Tiarnan A. S. Doherty et al.

Summary: This study successfully introduced octahedral tilting into pure alpha-FAPbI(3) thin films by using surface-bound ethylenediaminetetraacetic acid, ensuring extremely stability against thermal, environmental, and light stressors.

SCIENCE (2021)

Add to Collection

Review Multidisciplinary Sciences

Perovskite-based tandem solar cells

Zhimin Fang et al.

Summary: Perovskite-based tandem solar cells have shown rapid progress in recent years, with their excellent optoelectronic properties and tunable bandgaps making them potential candidates for developing high-efficiency solar cells. These tandem cells can be combined with silicon, Cu(In,Ga)Se-2, and organic cells. However, the field also faces challenges and opportunities for further improvement and innovation.

SCIENCE BULLETIN (2021)

Add to Collection

Review Optics

Prospects for metal halide perovskite-based tandem solar cells

Rui Wang et al.

Summary: Metal halide perovskite photovoltaics have made significant progress in the past decade, particularly in increasing the efficiency of single-junction perovskite solar cells from 3.8% to 25.5%. The broad bandgap tunability of perovskites can potentially overcome the efficiency limits of traditional solar cells, and the development of tandem solar cells pairing perovskite with other mature photovoltaic technologies shows promising prospects.

NATURE PHOTONICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Controlled n-Doping in Air-Stable CsPbI2Br Perovskite Solar Cells with a Record Efficiency of 16.79%

Yu Han et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Triple-halide wide-band gap perovskites with suppressed phase segregation for efficient tandems

Jixian Xu et al.

SCIENCE (2020)

Add to Collection

Article Energy & Fuels

Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells

Xiaopeng Zheng et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Precursor Engineering for Ambient-Compatible Antisolvent-Free Fabrication of High-Efficiency CsPbI2Br Perovskite Solar Cells

Chenyang Duan et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Perovskite-Based Tandem Solar Cells: Get the Most Out of the Sun

Zhihao Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Cs4PbI6-Mediated Synthesis of Thermodynamically Stable FA(0.15)Cs(0.85)PbI(3)Perovskite Solar Cells

Zhipeng Shao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Energy & Fuels

All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2using surface-anchoring zwitterionic antioxidant

Ke Xiao et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Passivation Molecular Structures for Extremely Small Open-Circuit Voltage Loss in Perovskite Solar Cells

Shuang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Chemistry, Physical

Chlorine doping for black γ-CsPbI3 solar cells with stabilized efficiency beyond 16%

Kang Wang et al.

NANO ENERGY (2019)

Add to Collection

Editorial Material Multidisciplinary Sciences

CsPbI2.25Br0.75 solar cells with 15.9% efficiency

Zhimin Fang et al.

SCIENCE BULLETIN (2019)

Add to Collection

Article Chemistry, Physical

Ruddlesden-Popper 2D Component to Stabilize γ-CsPbI3 Perovskite Phase for Stable and Efficient Photovoltaics

Kang Wang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Spontaneous low-temperature crystallization of α-FAPbI3 for highly efficient perovskite solar cells

Taiyang Zhang et al.

SCIENCE BULLETIN (2019)

Add to Collection

Editorial Material Multidisciplinary Sciences

Interface engineering gifts CsPbI2.25Br0.75 solar cells high performance

Zhimin Fang et al.

SCIENCE BULLETIN (2019)

Add to Collection

Article Energy & Fuels

Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(II) oxidation in precursor ink

Renxing Lin et al.

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Pyridine-functionalized fullerene additive enabling coordination interactions with CH3NH3PbI3 perovskite towards highly efficient bulk heterojunction solar cells

Jieming Zhen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Grain Engineering for Perovskite/Silicon Monolithic Tandem Solar Cells with Efficiency of 25.4%

Bo Chen et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Polymer Doping for High-Efficiency Perovskite Solar Cells with Improved Moisture Stability

Jiexuan Jiang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Composition-Tuned Wide Bandgap Perovskites: From Grain Engineering to Stability and Performance Improvement

Yang Zhou et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Compositional Engineering for Efficient Wide Band Gap Perovskites with Improved Stability to Photoinduced Phase Segregation

Kevin A. Bush et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Interstitial Mn2+-Driven High-Aspect-Ratio Grain Growth for Low-Trap-Density Microcrystalline Films for Record Efficiency CsPbl2Br Solar Cells

Dongliang Bai et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Review Energy & Fuels

Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors

Tomas Leijtens et al.

NATURE ENERGY (2018)

Add to Collection

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Monolithic perovskite/Si tandem solar cells exceeding 22% efficiency via optimizing top cell absorber

Zhiwen Qiu et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Low Temperature Fabrication for High Performance Flexible CsPbI2Br Perovskite Solar Cells

Hong Jiang et al.

ADVANCED SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Vapor-fumigation for record efficiency two-dimensional perovskite solar cells with superior stability

Xuejie Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Band Gap Tuning via Lattice Contraction and Octahedral Tilting in Perovskite Materials for Photovoltaics

Rohit Prasanna et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Energy & Fuels

Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites

Zhiping Wang et al.

NATURE ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

CH3NH3PbBr3-CH3NH3PbI3 Perovskite-Perovskite Tandem Solar Cells with Exceeding 2.2 V Open Circuit Voltage

Jin Hyuck Heo et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

An efficient planar-heterojunction solar cell based on wide-bandgap CH3NH3PbI2.1Br0.9 perovskite film for tandem cell application

Weidong Zhu et al.

CHEMICAL COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency

Michael Saliba et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Unreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells

T. Jesper Jacobsson et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Multidisciplinary Sciences

A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells

David P. McMeekin et al.

SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?

Fangzhou Liu et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Abnormal crystal growth in CH3NH3PbI3-xClx using a multi-cycle solution coating process

Qingfeng Dong et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Low-Temperature Fabrication of Efficient Wide-Bandgap Organolead Trihalide Perovskite Solar Cells

Cheng Bi et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.