Related references
Note: Only part of the references are listed.Charge Carrier Lifetime Fluctuations and Performance Evaluation of Cu(In,Ga)Se2 Absorbers via Time-Resolved-Photoluminescence Microscopy
Mario Ochoa et al.
ADVANCED ENERGY MATERIALS (2022)
Predicting Solar Cell Performance from Terahertz and Microwave Spectroscopy
Hannes Hempel et al.
ADVANCED ENERGY MATERIALS (2022)
Top Stack Optimization for Cu2BaSn(S, Se)4 Photovoltaic Cell Leads to Improved Device Power Conversion Efficiency beyond 6%
Betul Teymur et al.
ADVANCED ENERGY MATERIALS (2022)
Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells
Yuancai Gong et al.
NATURE ENERGY (2022)
Influence of Copper Composition on Cu2BaSn(S,Se)4 Solution- Deposited Films and Photovoltaic Devices with Over 5% Efficiency
Betul Teymur et al.
ACS APPLIED ENERGY MATERIALS (2022)
Optoelectronic and material properties of solution-processed Earth-abundant Cu2BaSn(S, Se)4 films for solar cell applications
Betul Teymur et al.
NANO ENERGY (2021)
Large-Grain Double Cation Perovskites with 18 μs Lifetime and High Luminescence Yield for Efficient Inverted Perovskite Solar Cells
Emilio Gutierrez-Partida et al.
ACS ENERGY LETTERS (2021)
Growth and Photovoltaic Device Application of Cu2BaGe1-xSnxSe4 Films Prepared by Selenization of Sequentially Deposited Precursors
Yongshin Kim et al.
ACS APPLIED ENERGY MATERIALS (2021)
Optoelectronic property comparison for isostructural Cu2BaGeSe4 and Cu2BaSnS4 solar absorbers
Yongshin Kim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
High Efficiency CIGS Solar Cells by Bulk Defect Passivation through Ag Substituting Strategy
Yunhai Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Structural Tolerance Factor Approach to Defect-Resistant I2-II-IV-X4 Semiconductor Design
Jon-Paul Sun et al.
CHEMISTRY OF MATERIALS (2020)
Wide-gap (Ag,Cu)(In,Ga)Se2 solar cells with different buffer materials-A path to a better heterojunction
Jan Keller et al.
PROGRESS IN PHOTOVOLTAICS (2020)
Substitution of Ag for Cu in Cu2ZnSn(S,Se)4: Toward Wide Band Gap Absorbers with Low Antisite Defects for Thin Film Solar Cells
Yanjie Wu et al.
NANOMATERIALS (2020)
Comparison of Ag and Ga alloying in low bandgap CuInSe2-based solar cells
Nicholas Valdes et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Nanoscale charge transport and local surface potential distribution to probe defect passivation in Ag doped Cu2ZnSnS4 absorbing layer
Kulwinder Kaur et al.
NANOTECHNOLOGY (2019)
Origins of ultralow thermal conductivity in 1-2-1-4 quaternary selenides
Jimmy Jiahong Kuo et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Surface passivation and point defect control in Cu(In,Ga)Se2 films with a Na2S post deposition treatment for higher than 19% CIGS cell performance
Seung Tae Kim et al.
SUSTAINABLE ENERGY & FUELS (2019)
The role of Ag in aqueous solution processed (Ag,Cu)(2)ZnSn(S,Se)(4) kesterite solar cells: antisite defect elimination and importance of Na passivation
Wei-Chih Huang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment
Chang Yan et al.
NATURE ENERGY (2018)
Solution-Processed Earth-Abundant Cu2BaSn(S,Se)4 Solar Absorber Using a Low-Toxicity Solvent
Betul Teymur et al.
CHEMISTRY OF MATERIALS (2018)
Band Gap Tailoring and Structure-Composition Relationship within the Alloyed Semiconductor Cu2BaGe1-xSnxSe4
Garrett C. Wessler et al.
CHEMISTRY OF MATERIALS (2018)
Minority and Majority Charge Carrier Mobility in Cu2ZnSnSe4 revealed by Terahertz Spectroscopy
Hannes Hempel et al.
SCIENTIFIC REPORTS (2018)
Synergistic Effects of Double Cation Substitution in Solution-Processed CZTS Solar Cells with over 10% Efficiency
Shreyash H. Hadke et al.
ADVANCED ENERGY MATERIALS (2018)
Defect Engineering in Multinary Earth-Abundant Chalcogenide Photovoltaic Materials
Donghyeop Shin et al.
ADVANCED ENERGY MATERIALS (2017)
I2-II-IV-VI4 (I = Cu, Ag; II = Sr, Ba; IV = Ge, Sn; VI = S, Se): Chalcogenides for Thin-Film Photovoltaics
Tong Zhu et al.
CHEMISTRY OF MATERIALS (2017)
Elemental Precursor Solution Processed (Cu1-xAgx)2ZnSn(S,Se)4 Photovoltaic Devices with over 10% Efficiency
Yafang Qi et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Earth-Abundant Chalcogenide Photovoltaic Devices with over 5% Efficiency Based on a Cu2BaSn(S,Se)4 Absorber
Donghyeop Shin et al.
ADVANCED MATERIALS (2017)
Intragrain charge transport in kesterite thin films-Limits arising from carrier localization
Hannes Hempel et al.
JOURNAL OF APPLIED PHYSICS (2016)
Trigonal Cu2-II-Sn-VI4 (II = Ba, Sr and VI = S, Se) quaternary compounds for earth-abundant photovoltaics
Feng Hong et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)
Is the Cu/Zn Disorder the Main Culprit for the Voltage Deficit in Kesterite Solar Cells?
Stephane Bourdais et al.
ADVANCED ENERGY MATERIALS (2016)
Photovoltaic Materials and Devices Based on the Alloyed Kesterite Absorber (AgxCu1-x)2ZnSnSe4
Talia Gershon et al.
ADVANCED ENERGY MATERIALS (2016)
Engineering Solar Cell Absorbers by Exploring the Band Alignment and Defect Disparity: The Case of Cu- and Ag-Based Kesterite Compounds
Zhen-Kun Yuan et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
A parallel dipole line system
Oki Gunawan et al.
APPLIED PHYSICS LETTERS (2015)
Impact of Nanoscale Elemental Distribution in High-Performance Kesterite Solar Cells
Kasra Sardashti et al.
ADVANCED ENERGY MATERIALS (2015)
An effect of Ag(I)-substitution at Cu sites in CuGaS2 on photocatalytic and photoelectrochemical properties for solar hydrogen evolution
Hiroshi Kaga et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Atomic Layer Deposited Gallium Oxide Buffer Layer Enables 1.2 V Open-Circuit Voltage in Cuprous Oxide Solar Cells
Yun Seog Lee et al.
ADVANCED MATERIALS (2014)
Observed damage during Argon gas cluster depth profiles of compound semiconductors
Anders J. Barlow et al.
JOURNAL OF APPLIED PHYSICS (2014)
Classification of Lattice Defects in the Kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 Earth-Abundant Solar Cell Absorbers
Shiyou Chen et al.
ADVANCED MATERIALS (2013)
Band tailing and efficiency limitation in kesterite solar cells
Tayfun Gokmen et al.
APPLIED PHYSICS LETTERS (2013)
Prospects and performance limitations for Cu-Zn-Sn-S-Se photovoltaic technology
David B. Mitzi et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2013)
Abundance of CuZn + SnZn and 2CuZn + SnZn defect clusters in kesterite solar cells
Shiyou Chen et al.
APPLIED PHYSICS LETTERS (2012)
Kesterite thin films for photovoltaics: a review
S. Delbos
EPJ PHOTOVOLTAICS (2012)
High-temperature stability of molybdenum (Mo) back contacts for CIGS solar cells: a route towards more robust back contacts
Ju-Heon Yoon et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)
The electronic structure of Cu(In1-xGax)Se2 alloyed with silver
Peter T. Erslev et al.
THIN SOLID FILMS (2011)
The electronic consequences of multivalent elements in inorganic solar absorbers: Multivalency of Sn in Cu2ZnSnS4
Koushik Biswas et al.
APPLIED PHYSICS LETTERS (2010)
Long lifetimes in high-efficiency Cu(In,Ga)Se2 solar cells
Wyatt K. Metzger et al.
APPLIED PHYSICS LETTERS (2008)
Effect of back-contact barrier on thin-film CdTe solar cells
S. H. Demtsu et al.
THIN SOLID FILMS (2006)
Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation
T Minemoto et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2001)