☆ 4.7 Article

Molecule Passivation of Grain Boundaries for Ultra-Stable Perovskite Solar Cells

SOLAR RRL (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Bi(trifluoromethyl) Benzoic Acid-Assisted Shallow Defect Passivation for Perovskite Solar Cells with an Efficiency Exceeding 21%

Xingdong Ding et al.

Summary: Chemical additive engineering, specifically introducing a small organic molecule 3,5-bis(trifluoromethyl)benzoic acid (6FBzA), has been shown to significantly enhance the power conversion efficiency and stability of perovskite solar cells. The improved properties are attributed to the healing of Pb2+ defects at the surface, suppression of trap-assisted nonradiative recombination, and enhanced interfacial charge extraction and transfer. The 6FBzA-treated device achieved a champion PCE and demonstrated good long-term stability under ambient air conditions.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Symmetrical Acceptor-Donor-Acceptor Molecule as a Versatile Defect Passivation Agent toward Efficient FA0.85MA0.15PbI3 Perovskite Solar Cells

Wenjing Zhao et al.

Summary: This study adopts an organic acceptor-donor-acceptor (A-D-A) molecule called IDT-OD as a defect passivation agent to improve the efficiency and stability of perovskite solar cells (PSCs). The symmetrical double arms structure of IDT-OD molecule helps to form a superior perovskite layer, resulting in enhanced performance of the cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic Liquid Treatment for Highest-Efficiency Ambient Printed Stable All-Inorganic CsPbI3 Perovskite Solar Cells

Yachao Du et al.

Summary: The incorporation of a low concentration of a novel ionic liquid successfully improves the defects, energy alignment at the interface, and stability of CsPbI3 perovskite solar cells fabricated via ambient blade-coating. The cells achieve high power conversion efficiency and impressive long-term ambient stability.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Diammonium Molecular Configuration-Induced Regulation of Crystal Orientation and Carrier Dynamics for Highly Efficient and Stable 2D/3D Perovskite Solar Cells

Yang Zhong et al.

Summary: The molecular configuration of diammonium spacer cations plays a crucial role in regulating the crystallization kinetic and carrier dynamics of 2D/3D perovskites. By optimizing the Pb-I-Pb angle and facilitating suitable binding energy and hydrogen-bonding, high-quality perovskite films with vertical crystal orientation, mitigatory lattice distortion, and efficient carrier transportation can be achieved, resulting in significantly improved device efficiency and excellent moisture stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Pre-Buried Additive for Cross-Layer Modification in Flexible Perovskite Solar Cells with Efficiency Exceeding 22%

Zhonghao Zheng et al.

Summary: Halide perovskites have shown great potential in flexible photovoltaics. However, the performance of flexible perovskite solar cells (F-PSCs) has been limited by interfacial stress and lattice mismatch caused by the deformation of flexible substrates. This study uses ammonium formate as an additive in the electron transport layer to modify the layers and their interface, resulting in improved electron extraction, relaxed strain, and reduced defect densities. As a result, the highest power conversion efficiency reported so far is achieved for F-PSCs.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Bioinspired molecules design for bilateral synergistic passivation in buried interfaces of planar perovskite solar cells

Bin Wang et al.

Summary: Inspired by the adhesion mechanism of mussels, three catechol derivatives with functional Lewis base groups were designed to act as passivators for buried interfaces in perovskite solar cells. Among them, DOPA exhibited the best performance and after 55 days of storage, devices treated with DOPA maintained 85% of their initial performance in air with 15% relative humidity.

NANO RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Learning From Plants: Lycopene Additive Passivation toward Efficient and Fresh Perovskite Solar Cells with Oxygen and Ultraviolet Resistance

Xinmeng Zhuang et al.

Summary: In this study, natural antioxidant lycopene extracted from tomatoes is introduced into perovskite solar cells, improving their power conversion efficiency and stability. Lycopene can passivate grain boundaries, improve crystallinity, reduce trap density, and eliminate UV-induced free radicals. This work provides a strategy to enhance the efficiency and stability of perovskite solar cells through using natural additives.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Energy & Fuels

Modulating crystal growth of formamidinium-caesium perovskites for over 200 cm2 photovoltaic sub-modules

Tongle Bu et al.

Summary: By tailoring the composition of the precursor ink and adding additives in the co-solvent system, high-efficiency perovskite solar cells over large areas have been achieved.

NATURE ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Efficient, stable formamidinium-cesium perovskite solar cells and minimodules enabled by crystallization regulation

Yiming Li et al.

Summary: Researchers have developed a dual-functional additive that can regulate the crystallization and defects of FA-Cs perovskite film, resulting in improved efficiency and stability of perovskite solar cells.

JOULE (2022)

Add to Collection

Article Energy & Fuels

Amino Acid-Based Low-Dimensional Management for Enhanced Perovskite Solar Cells

Yingjie Hu et al.

Summary: It has been reported that introducing a lower dimensional perovskite overlayer can effectively enhance the performance of 3D perovskite solar cells. By forming a low-dimensional capping layer on the surface of the perovskite films, the devices show improved surface traps, reduced defect density, enhanced carrier lifetimes, and altered band alignment, resulting in higher device efficiencies.

SOLAR RRL (2022)

Add to Collection

Article Chemistry, Physical

Bifunctional Passivation through Fluoride Treatment for Highly Efficient and Stable Perovskite Solar Cells

Chang Liu et al.

Summary: In this study, fluoride is used as a passivation agent to reduce defects on both the TiO2 surface and the bottom surface of the perovskite layer, thereby improving the efficiency and stability of PSCs.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Lewis base governing superfacial proton behavior of hybrid perovskite: Basicity dependent passivation strategy

Wanxian Cai et al.

Summary: This study investigates the behavior of protons in hybrid perovskites induced by Lewis base and their impact on the lattice structure and charge transfer kinetics in perovskite solar cells. It is found that the basicity of the Lewis base affects the stability of the organic species on the perovskite surface and the interfacial charge transport. By regulating the proton behavior, the power conversion efficiency is significantly improved, and the operational stability is enhanced.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

(3-Aminopropyl)trimethoxysilane Surface Passivation Improves Perovskite Solar Cell Performance by Reducing Surface Recombination Velocity

Yangwei Shi et al.

Summary: We demonstrate that using APTMS as a surface passivator can reduce surface recombination velocity and enhance power conversion efficiency in mixed-cation mixed-halide perovskite solar cells. The study shows that APTMS can passivate defects at the perovskite surface and decouple the perovskite from detrimental interactions at the C-60 interface. The use of APTMS effectively suppresses nonradiative recombination and improves both the fill factor and open-circuit voltage, resulting in increased power-conversion efficiency.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Blue Perovskite Light-Emitting Diodes Enabled by Efficient Energy Transfer between Coupled Quasi-2D Perovskite Layers

Zhenwei Ren et al.

Summary: By strategically introducing the bifunctional ligand ABA into quasi-2D perovskite films, this study enhances energy transfer between perovskite layers, promotes efficient electroluminescence, and reduces nonradiative recombination loss. The advanced properties of ABA-incorporated perovskites result in highly efficient and stable blue PeLEDs, making significant progress towards practical applications.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells

Jun Peng et al.

Summary: This research introduces a nanopatterned electron transport layer that overcomes the trade-off between passivation quality and series resistance in traditional polymer passivation layers. Combining the nanopatterned electron transport layer with a dopant-free hole transport layer improves the efficiency and stability of perovskite solar cells.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%

Hongwei Zhu et al.

Summary: The study introduces a trifluoromethylation strategy using TFMBAI and TFP as additives to improve the PCE and moisture resistance of PSCs. By surface treating the perovskite with TFMBAI and adding TFP to the HTL, the PSCs achieved a higher efficiency and improved durability against moisture attack.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Optics

Suppression of temperature quenching in perovskite nanocrystals for efficient and thermally stable light-emitting diodes

Mingming Liu et al.

Summary: Fluoride-treated CsPbBr3 nanocrystals exhibit near unity emission efficiency at temperatures up to 373 K, with constant decay kinetics. The treatment leads to surfaces rich in fluorine with wider energy gaps than the core, suppressing carrier trapping and improving thermal stability. Devices incorporating these nanocrystals show low turn-on voltage and high external quantum efficiency, with nearly 80% efficiency maintained at high temperatures, offering a promising pathway for high-performance light-emitting diodes based on perovskite nanostructures.

NATURE PHOTONICS (2021)

Add to Collection

Article Multidisciplinary Sciences

Tuning structural isomers of phenylenediammonium to afford efficient and stable perovskite solar cells and modules

Cheng Liu et al.

Summary: The study focuses on understanding the energy barrier of 2D perovskite formation and proposes a method to prevent the formation of in-plane favored 2D perovskite layers, leading to improved device performance.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Polaron-Adsorbate Coupling at the TiO2(110)-Carboxylate Interface

Alex J. Tanner et al.

Summary: This study demonstrates the profound and differing effects of the dissociative adsorption of formic and acetic acids on the surface density, crystal field, and photoexcitation of polarons in rutile TiO2(110). The contrasting electrostatic properties of the acids govern the extent of polaron-adsorbate coupling, leading to new photoexcitation channels and potentially increasing the catalytic photoyield. The density of polarons in the surface region increases more in formate-terminated TiO2(110) compared to acetate, with potential implications for catalytic activity.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

40.1% Record Low-Light Solar-Cell Efficiency by Holistic Trap-Passivation using Micrometer-Thick Perovskite Film

Xilai He et al.

Summary: Perovskite solar cells show high efficiency in both full sunlight and low-light conditions, with a record efficiency of 40.1% achieved under warm LED light. A holistic passivation strategy reduces trap states in both surface and bulk of the perovskite film, resulting in increased charge carrier lifetimes and decreased nonradiative recombination loss. This work paves the way for high-performance, self-powered IoT devices.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Unveiling the additive-assisted oriented growth of perovskite crystallite for high performance light-emitting diodes

Lin Zhu et al.

Summary: Solution-processed metal halide perovskites with additives play a crucial role in passivating defects and influencing the crystallization process. By tracking chemical interactions and crystallographic evolution, suitable additives can be found to improve the quality of perovskite films and device performance.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Fluoroethylamine Engineering for Effective Passivation to Attain 23.4% Efficiency Perovskite Solar Cells with Superior Stability

Hang Su et al.

Summary: The study introduces fluoroethylamine (FEA) into perovskite films to passivate defects, finding that the distribution of fluorine atoms in the molecule affects the passivation effect and performance of the perovskite film. These FEA passivated perovskite films showed improved carrier-lifetime, suppressed nonradiative recombination, and enhanced hydrophobicity, with different fluorine distribution patterns leading to varied efficiency and stability outcomes.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Efficient and Stable FAPbBr3 Perovskite Solar Cells via Interface Modification by a Low-Dimensional Perovskite Layer

Yawen Liu et al.

Summary: The research successfully constructed a 2D/3D perovskite interface using the PEABr treatment method, significantly enhancing the power conversion efficiency and fill factor of perovskite solar cells. The hydrophobic alkyl chain in the PEA cation not only improved the moisture tolerance of perovskite, but also increased the stability of the solar cells.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Depth-dependent defect manipulation in perovskites for high-performance solar cells

Yuzhuo Zhang et al.

Summary: A depth-dependent manipulation strategy is demonstrated to concurrently modulate the bulk and interfacial defects in perovskite films, resulting in improved efficiency of PSCs. This strategy provides new insights into spatial defect modulation and may open up promising ways for defect modulator design for highly efficient perovskite optoelectronic devices.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Passivation and process engineering approaches of halide perovskite films for high efficiency and stability perovskite solar cells

Abd. Rashid bin Mohd Yusoff et al.

Summary: The surface, interfaces, and grain boundaries of halide perovskite films play critical roles in achieving and maintaining high solar cell performance. Various defect engineering approaches are utilized to improve the efficiency and stability of perovskite solar cells, with a focus on passivating materials and process engineering techniques.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Efficient and stable perovskite solar cells thanks to dual functions of oleyl amine-coated PbSO4(PbO)4 quantum dots: Defect passivation and moisture/oxygen blocking

Chong Chen et al.

NANO ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Bilateral Interface Engineering for Efficient and Stable Perovskite Solar Cells Using Phenylethylammonium Iodide

Yuanyuan Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell

Yong Li et al.

ADVANCED SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells

Jiangzhao Chen et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Energy & Fuels

Toward Efficient and Stable Perovskite Solar Cells: Choosing Appropriate Passivator to Specific Defects

Xin Zhou et al.

SOLAR RRL (2020)

Add to Collection

Correction Chemistry, Multidisciplinary

Tailoring Passivation Molecular Structures for Extremely Small Open-Circuit Voltage Loss in Perovskite Solar Cells (vol 141, pg 5781, 2019)

Shuang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Molecular Interaction Regulates the Performance and Longevity of Defect Passivation for Metal Halide Perovskite Solar Cells

Yepin Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Isothermally crystallized perovskites at room-temperature

Kai Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Metal Halide Perovskite Light-Emitting Devices: Promising Technology for Next-Generation Displays

Min Lu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Planar perovskite solar cells with long-term stability using ionic liquid additives

Sai Bai et al.

NATURE (2019)

Add to Collection

Article Multidisciplinary Sciences

Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics

Rui Wang et al.

SCIENCE (2019)

Add to Collection

Article Electrochemistry

A NH4F interface passivation strategy to produce air-processed high-performance planar perovskite solar cells

Ziqiu Ren et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Synthetic Control over Quantum Well Width Distribution and Carrier Migration in Low-Dimensional Perovskite Photovoltaics

Andrew H. Proppe et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells

Dong Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Ligand-Stabilized Reduced-Dimensionality Perovskites

Li Na Quan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Fluorinated and non-fluorinated conjugated polymers showing different photovoltaic properties in polymer solar cells with PFNBr interlayers

Zhiguo Zhao et al.

ORGANIC ELECTRONICS (2016)

Add to Collection

Article Multidisciplinary Sciences

Electron-phonon coupling in hybrid lead halide perovskites

Adam D. Wright et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Review Nanoscience & Nanotechnology

Hybrid organic-inorganic perovskites: low-cost semiconductors with intriguing charge-transport properties

Thomas M. Brenner et al.

NATURE REVIEWS MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Supramolecular Halogen Bond Passivation of Organic-Inorganic Halide Perovskite Solar Cells

Antonio Abate et al.

NANO LETTERS (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.