Related references
Note: Only part of the references are listed.Protection effectiveness of sacrificial cladding for near-field blast mitigation
Hongyuan Zhou et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)
Numerical Investigation on Performance Optimization of Offshore Sandwich Blast Walls with Different Honeycomb Cores Subjected to Blast Loading
Hong Lin et al.
JOURNAL OF MARINE SCIENCE AND ENGINEERING (2022)
Numerical Investigation of Different Core Topologies in Sandwich-Structured Composites Subjected to Air-Blast Impact
Marcel Walkowiak et al.
APPLIED SCIENCES-BASEL (2022)
Relative performance of novel blast wave mitigation system to conventional system based on mitigation percent criteria
Moustafa Esa et al.
DEFENCE TECHNOLOGY (2021)
Experimental study on the dynamic responses of foam sandwich panels with different facesheets and core gradients subjected to blast impulse
Guangyong Sun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)
Mitigating Risk of Confined Explosion via Lightweight Sacrificial Cladding
Yasser A. Khalifa et al.
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2020)
Study of Mild Steel Sandwich Structure Energy Absorption Performance Subjected to Localized Impulsive Loading
Nouman Alqwasmi et al.
MATERIALS (2020)
Numerical Analysis for Critical Structures Protection against Blast Loading Using Metallic Panels
Ageel Alogla et al.
APPLIED SCIENCES-BASEL (2020)
Dynamic Behavior of Steel and Composite Ferry Subjected to Transverse Eccentric Moving Load Using Finite Element Analysis
Mohamed N. Lotfy et al.
APPLIED SCIENCES-BASEL (2020)
Taylor impact test revisited: Determination of plasticity parameters for metals at high strain rate
Subhajit Sen et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Response of a new structural ultra-high performance concrete barrier wall subjected to blast loading
Ahmed K. Taha et al.
AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING (2020)
Effectiveness of Polyurea Coated Steel Plates in Blast Mitigation in Vehicles
Agesh Markose et al.
STRUCTURAL INTEGRITY ASSESSMENT, ICONS 2018 (2020)
Behavior of reinforced concrete sandwiched panels (RCSPs) under blast load
Asim Abbas et al.
ENGINEERING STRUCTURES (2019)
Retrofitting materials for enhanced blast performance of Structures: Recent advancement and challenges ahead
Abhiroop Goswami et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Optimal design of sandwich panels with layered-gradient aluminum foam cores under air-blast loading
De Chen et al.
COMPOSITES PART B-ENGINEERING (2019)
Experimental investigation of design and retrofit methods for blast load mitigation - A state-of-the-art review
Hrvoje Draganic et al.
ENGINEERING STRUCTURES (2019)
Numerical study of fence type blast walls for blast load mitigation
Ming Jin et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)
Numerical Analysis and Dynamic Response of Optimized Composite Cross Elliptical Pressure Hull Subject to Non-Contact Underwater Blast Loading
Mahmoud Helal et al.
APPLIED SCIENCES-BASEL (2019)
Investigating Different Grounds Effects on Shock Wave Propagation Resulting from Near-Ground Explosion
Yan Wang et al.
APPLIED SCIENCES-BASEL (2019)
Numerical analysis of cladding sandwich panels with tubular cores subjected to uniform blast load
Wang Cheng et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)
Experimental and numerical studies on the dynamic response of steel plates subjected to confined blast loading
Cheng Zheng et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Experimental response of high strength steels to localised blast loading
B. McDonald et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Numerical study of sandwich panel with a new bi-directional Load-Self-Cancelling (LSC) core under blast loading
Zhejian Li et al.
THIN-WALLED STRUCTURES (2018)
Dynamic Stress of Subgrade Bed Layers Subjected to Train Vehicles with Large Axle Loads
Fang Xu et al.
SHOCK AND VIBRATION (2018)
Air-blast response of sacrificial cladding using low density foams: Experimental and analytical approach
H. Ousji et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Development of a New Fence Type Blast Wall for Blast Protection: Numerical Analysis
Ruiqing Zong et al.
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2017)
Numerical simulation of dynamic response of water in buried pipeline under explosion
Mohsen Parviz et al.
KSCE JOURNAL OF CIVIL ENGINEERING (2017)
Experimental study on the response of thin aluminium and steel plates subjected to airblast loading
V. Aune et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Investigation on high-velocity impact performance of multi-layered alumina ceramic armors with polymeric interlayers
A. Rashed et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Simulation of Blast Action on Civil Structures Using ANSYS Autodyn
N. N. Fedorova et al.
INTERNATIONAL CONFERENCE ON THE METHODS OF AEROPHYSICAL RESEARCH (ICMAR 2016) (2016)
Numerical investigation of the dynamic response of optimized composite elliptical submersible pressure hull subjected to non-contact underwater explosion
Elsayed Fathallah et al.
COMPOSITE STRUCTURES (2015)
Determination of Johnson cook material and failure model constants and numerical modelling of Charpy impact test of armour steel
A. Banerjee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Dynamic behavior of stiffened plates under underwater shock loading
Mahmoud M. K. Helal et al.
MATERIALS TESTING (2015)
Experimental and numerical study of foam filled corrugated core steel sandwich structures subjected to blast loading
Murat Yazici et al.
COMPOSITE STRUCTURES (2014)
Dynamic response of corrugated sandwich steel plates with graded cores
Linhui Zhang et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)
Numerical Simulation and Response of Stiffened Plates Subjected to Noncontact Underwater Explosion
Elsayed Fathallah et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2014)
Numerical Analysis of Foam-Protected RC Members Under Blast Loads
Ye Xia et al.
INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2014)
A finite element modelling to investigate the mitigation of blast effects on reinforced concrete panel using foam cladding
Chengqing Wu et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)
Validation of Johnson-Cook plasticity and damage model using impact experiment
Xuemei Wang et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)
Performance of aluminum foam-steel panel sandwich composites subjected to blast loading
H. Liu et al.
MATERIALS & DESIGN (2013)
Blast Wave Mitigation by a Particulate Foam Barrier
A. Britan et al.
TRANSPORT IN POROUS MEDIA (2012)
Fracture of aluminium foam core sacrificial cladding subjected to air-blast loading
G. S. Langdon et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation
H. Koerber et al.
MECHANICS OF MATERIALS (2010)
Determination of the Johnson-Cook Material Parameters Using the SCS Specimen
A. Dorogoy et al.
EXPERIMENTAL MECHANICS (2009)
An improved multi-objective identification of Johnson-Cook material parameters
A. S. Milani et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2009)
Prediction of airblast loads on structures behind a protective barrier
X. Q. Zhou et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)
Deformation of mild steel plates subjected to large-scale explosions
S. Chung Kim Yuen et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2008)
Energy absorption of double-layer foam cladding for blast alleviation
G. W. Ma et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2007)
Pulse pressure loading of aircraft structural panels
M. C. Simmons et al.
THIN-WALLED STRUCTURES (2006)
Numerical prediction of blast-induced stress wave from large-scale underground explosion
CQ Wu et al.
INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2004)
What is an explosion? A case history of an investigation for the insurance industry
RJ Martin et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2000)
Share Paper
