4.6 Article

Carbon Black/Multi-Walled Carbon Nanotube-Based, Highly Sensitive, Flexible Pressure Sensor

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Ti3C2TX@nonwoven Fabric Composite: Promising MXene-Coated Fabric for Wearable Piezoresistive Pressure Sensors

Qinghua Yu et al.

Summary: In this study, composite materials using different fabrics and MXene nanosheets were prepared through room temperature impregnation. The Ti3C2Tx@NWF composite was found to be the optimal flexible pressure sensor, demonstrating high sensitivity, a wide sensing range, fast response/recovery times, and excellent durability. The findings provide a basis for the rational design of MXene/textile composites as wearable pressure sensors and demonstrate the potential of these sensors in monitoring human motion and locating pressure accurately.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Materials Science, Composites

Highly sensitive and stable 3D flexible pressure sensor based on carbon black and multi-walled carbon nanotubes prepared by hydrothermal method

Chong Liu et al.

Summary: High-performance piezoresistive sensors have the potential to be used in human health monitoring applications. A piezoresistive sensor without any adhesive polymer was fabricated by introducing multi-walled carbon nanotubes and carbon black into the skeletons of melamine sponge via a simple hydrothermal method. The resulting MWCNTs@CB sensor exhibits excellent performance and can detect physiological motions.

COMPOSITES COMMUNICATIONS (2022)

Article Engineering, Environmental

Bioinspired hierarchical polydimethylsiloxane/polyaniline array for ultrasensitive pressure monitoring

Yan Ma et al.

Summary: In this study, a hierarchical structure-based pressure sensor composed of PDMS micropillars and PANI nanoneedles was designed. This sensor exhibits excellent performance in terms of sensitivity, response time, and cycle stability, and shows promising potential in human physiological signal monitoring.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Flexible porous Gelatin/Polypyrrole/Reduction graphene oxide organohydrogel for wearable electronics

Lijun You et al.

Summary: The application of hydrogels in flexible electronics is limited due to the deterioration of mechanical and electrical properties caused by freezing at low temperature and desiccation after long-term use. In this study, a porous organohydrogel with high breathability, conductivity, mechanical flexibility, anti-freezing and long-term stability was prepared using a combined method of biological fermentation and salt-out toughening crosslinking. The sensor fabricated from this porous organohydrogel exhibited excellent sensing sensitivity, fast response ability, and good endurance, making it suitable for monitoring various human activities and serving as a pressure sensor and human-machine interface.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Review Polymer Science

Advances in Responsively Conductive Polymer Composites and Sensing Applications

Jianwen Chen et al.

Summary: Conductive polymer composites (CPCs) have good processability and various functionalities, with electrical resistance dominated by conductive networks. Utilizing stimulus-response behavior of these networks, CPCs can be used to design sensitive sensors to monitor environmental conditions, showing potential for versatile sensor applications.

POLYMER REVIEWS (2021)

Article Engineering, Environmental

Wide linear range and highly sensitive flexible pressure sensor based on multistage sensing process for health monitoring and human-machine interfaces

Mengjuan Zhong et al.

Summary: A micro-nano hybrid conductive elastomer film with arched micro-patterns array was developed to fabricate flexible pressure sensors with wide linear range and high sensitivity. The sensor exhibits a linear sensitivity of 26.6 kPa(-1) and a wide linear range of 20 Pa - 600 kPa, enabling applications in health monitoring and human-machine interfaces.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Materials Science, Composites

Highly sensitive pressure sensor with broad linearity via constructing a hollow structure in polyaniline/polydimethylsiloxane composite

Shaodi Zheng et al.

Summary: This study presents a flexible and wearable pressure sensor based on PANI/PDMS composite with hollow structure and micro-protrude surface structure, achieving high sensitivity and wide linear detection range through the design of these structures.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Engineering, Environmental

A high-performance piezoresistive sensor based on poly (styrene-co-methacrylic acid)@polypyrrole microspheres/ graphene-decorated TPU electrospun membrane for human motion detection

Haonan Cheng et al.

Summary: This paper presents a high-performance flexible piezoresistive sensor based on micro-nano 3D networked conductive electrospun membrane, featuring low operating voltage, high sensitivity, short response time, and excellent cycle stability, suitable for monitoring human physiological signals and motions.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Electrical & Electronic

Green technique solvent-free fabrication of silver nanoparticle-carbon nanotube flexible films for wearable sensors

Wen-Yin Ko et al.

Summary: A green and efficient strategy for constructing a sensitive wearable piezoresistive sensor has been reported, with good sensing performances under different pressure loading, bending angle, and elongation conditions. Finger movement recognition is achieved by testing exceptional resistance change, proving the practicality of the sensor in wearable electronics.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Article Chemistry, Physical

Three-dimensional light-weight piezoresistive sensors based on conductive polyurethane sponges coated with hybrid CNT/CB nanoparticles

Litao Huang et al.

Summary: The study introduces a simple and efficient method for fabricating lightweight three-dimensional piezoresistive sensing materials through coating CNT/CB@PU sponge, which demonstrates high sensitivity, fast response, instant recovery, and stable characteristics for designing versatile piezoresistive sensors to detect various human motions.

APPLIED SURFACE SCIENCE (2021)

Article Materials Science, Paper & Wood

Facilely constructed two-sided microstructure interfaces between electrodes and cellulose paper active layer: eco-friendly, low-cost and high-performance piezoresistive sensor

Zaihua Duan et al.

Summary: In this study, a low-cost, eco-friendly, and high-performance flexible piezoresistive pressure sensor was developed by combining polyester conductive electrodes and cellulose paper with inherent microstructure surfaces. The sensor showed high pressure sensitivities, good durability, and suitability for various wearable applications. The study provides a simple and effective strategy for designing piezoresistive sensors using microstructure interfaces between electrodes and active layer.

CELLULOSE (2021)

Article Chemistry, Physical

A stretchable self-powered triboelectric tactile sensor with EGaIn alloy electrode for ultra-low-pressure detection

Jingjing Wang et al.

Summary: A self-powered triboelectric tactile sensor with multi-level structured polydimethylsiloxane triboelectric layer and PDMS/Eutectic Gallium-Indium alloy composite electrode is demonstrated with excellent detection limits of 0.23 Pa (experimental) and 7 mPa (calculated). This sensor is capable of monitoring human wrist pulses and exhibits remarkable resilience to stretching and significant damage.

NANO ENERGY (2021)

Article Materials Science, Composites

Design of flexible strain sensor with both ultralow detection limit and wide sensing range via the multiple sensing mechanisms

Jianwen Chen et al.

Summary: This study introduces a new strategy for designing flexible strain sensors with ultralow detection limit and wide sensing range, utilizing a dual sensing layer with multiple sensing mechanisms. This innovative approach may address the longstanding challenge of high-performance flexible strain sensors.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Ultra-sensitive flexible sandwich structural strain sensors based on a silver nanowire supported PDMS/PVDF electrospun membrane substrate

Zhenhua Yang et al.

Summary: A high-performance piezoresistive sensor based on a novel sandwich structure composite was developed in this study. The sensor exhibited high gauge factor and stability by embedding a hybrid conductive layer into two layers of PDMS. The porous structure of the membrane effectively restricted the movement range of adjacent nanoparticles, forming a stable conductive network structure.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Multidisciplinary

A Sensitive Piezoresistive Tactile Sensor Combining Two Microstructures

Xuguang Sun et al.

NANOMATERIALS (2019)

Article Nanoscience & Nanotechnology

Ultralow-Cost, Highly Sensitive, and Flexible Pressure Sensors Based on Carbon Black and Airlaid Paper for Wearable Electronics

Zhiyuan Han et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Stretchable Strain Vector Sensor Based on Parallelly Aligned Vertical Graphene

Shuang Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Engineering Surface Patterns with Shape Memory Polymers: Multiple Design Dimensions for Diverse and Hierarchical Structures

Lingyu Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Chemistry, Multidisciplinary

Advanced Carbon for Flexible and Wearable Electronics

Chunya Wang et al.

ADVANCED MATERIALS (2019)

Article Biochemical Research Methods

A liquid metal based capacitive soft pressure microsensor

Xuyan Zhou et al.

LAB ON A CHIP (2019)

Review Materials Science, Multidisciplinary

An overview of stretchable strain sensors from conductive polymer nanocomposites

Jianwen Chen et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Materials Science, Multidisciplinary

A flexible pressure sensor based on an MXene-textile network structure

Tongkuai Li et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Nanoscience & Nanotechnology

Multifunctional Bicontinuous Composite Foams with Ultralow Percolation Thresholds

Jiabin Xi et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Stretchable, Transparent, and Self-Patterned Hydrogel-Based Pressure Sensor for Human Motions Detection

Gang Ge et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Nanoscience & Nanotechnology

Paper/Carbon Nanotube-Based Wearable Pressure Sensor for Physiological Signal Acquisition and Soft Robotic Skin

Zhaoyao Zhan et al.

ACS APPLIED MATERIALS & INTERFACES (2017)