Related references
Note: Only part of the references are listed.Performance analysis and optimization of irreversible Dual-Atkinson cycle engine (DACE) with heat transfer effects under maximum power and maximum power density conditions
Guven Gonca
APPLIED MATHEMATICAL MODELLING (2016)
The influences of the engine design and operating parameters on the performance of a turbocharged and steam injected diesel engine running with the Miller cycle
Guven Gonca et al.
APPLIED MATHEMATICAL MODELLING (2016)
Thermodynamic analysis and performance maps for the irreversible Dual-Atkinson cycle engine (DACE) with considerations of temperature-dependent specific heats, heat transfer and friction losses
Guven Gonca
ENERGY CONVERSION AND MANAGEMENT (2016)
Theoretical and experimental study on the performance of a diesel engine fueled with diesel-biodiesel blends
Guven Gonca et al.
RENEWABLE ENERGY (2016)
Theoretical and experimental investigation of the Miller cycle diesel engine in terms of performance and emission parameters
Guven Gonca et al.
APPLIED ENERGY (2015)
Comprehensive performance analyses and optimization of the irreversible thermodynamic cycle engines (TCE) under maximum power (MP) and maximum power density (MPD) conditions
Guven Gonca et al.
APPLIED THERMAL ENGINEERING (2015)
Application of the Miller cycle and turbo charging into a diesel engine to improve performance and decrease NO emissions
Guven Gonca et al.
ENERGY (2015)
Combustion and emissions of compression ignition in a direct injection diesel engine fueled with pentanol
Li Li et al.
ENERGY (2015)
Investigation of the effects of renewable diesel fuels on engine performance, combustion, and emissions
Dolanimi Ogunkoya et al.
FUEL (2015)
Investigation of the influences of steam injection on the equilibrium combustion products and thermodynamic properties of bio fuels (biodiesels and alcohols)
Guven Gonca
FUEL (2015)
Investigation of Heat Transfer Influences on Performance of Air-Standard Irreversible Dual-Miller Cycle
Guven Gonca et al.
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2015)
SIMULATION OF PERFORMANCE AND NITROGEN OXIDE FORMATION OF A HYDROGEN-ENRICHED DIESEL ENGINE WITH THE STEAM INJECTION METHOD
Guven Gonca et al.
THERMAL SCIENCE (2015)
Comparison of steam injected diesel engine and Miller cycled diesel engine by using two zone combustion model
Guven Gonca et al.
JOURNAL OF THE ENERGY INSTITUTE (2015)
Influence of butanol addition to diesel-biodiesel blend on engine performance and particulate emissions of a stationary diesel engine
Zhi-Hui Zhang et al.
APPLIED ENERGY (2014)
Impact of nozzle holes configuration on fuel spray, wall impingement and NOx emission of a diesel engine for biodiesel-diesel blend (B20)
Subhash Lahane et al.
APPLIED THERMAL ENGINEERING (2014)
An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine
H. G. How et al.
ENERGY (2014)
Experimental investigation on the combustion, performance and pollutant emissions of biodiesel from animal fat residues on a direct injection diesel engine
Sary Awad et al.
ENERGY (2014)
Use of water containing acetone-butanol-ethanol for NOx-PM (nitrogen oxide-particulate matter) trade-off in the diesel engine fueled with biodiesel
Yu-Cheng Chang et al.
ENERGY (2014)
The effects of steam injection on the performance and emission parameters of a Miller cycle diesel engine
Guyen Gonca et al.
ENERGY (2014)
Possibility of using biodiesel from sunflower oil as an additive for the improvement of lubrication properties of low-sulfur diesel fuel
Milan Tomic et al.
ENERGY (2014)
Factors affecting biodiesel engine performance and exhaust emissions - Part I: Review
James Pullen et al.
ENERGY (2014)
Effects of fuels produced from fish and cooking oils on performance and emissions of a diesel engine
Rasim Behcet et al.
ENERGY (2014)
Development and experimental study on organic Rankine cycle system with single-screw expander for waste heat recovery from exhaust of diesel engine
Ye-Qiang Zhang et al.
ENERGY (2014)
Experimental and simulation investigation of the combustion characteristics and emissions using n-butanol/biodiesel dual-fuel injection on a diesel engine
Haifeng Liu et al.
ENERGY (2014)
Factors affecting biodiesel engine performance and exhaust emissions - Part II: Experimental study
James Pullen et al.
ENERGY (2014)
Effect of fuel oxygen on the energetic and exergetic efficiency of a compression ignition engine fuelled separately with palm and karanja biodiesels
Jibanananda Jena et al.
ENERGY (2014)
Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine
Hwai Chyuan Ong et al.
ENERGY (2014)
Theoretical and experimental investigation on effect of injection timing on NOx emission of biodiesel blend
S. Saravanan et al.
ENERGY (2014)
Combustion characteristics, performance and exhaust emissions of a diesel engine fueled with a waste cooking oil biodiesel mixture
Ozer Can
ENERGY CONVERSION AND MANAGEMENT (2014)
Investigation of the effects of steam injection on performance and NO emissions of a diesel engine running with ethanol-diesel blend
Guven Gonca
ENERGY CONVERSION AND MANAGEMENT (2014)
Performance and emissions of a diesel engine fueled by biodiesel-diesel, biodiesel-diesel-additive and kerosene-biodiesel blends
Murari Mohon Roy et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Effect of biodiesel blends on engine performance and exhaust emission for diesel dual fuel engine
R. Mohsin et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends
I. M. Rizwanul Fattah et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Effects of animal fat based biodiesel on a TDI diesel engine performance, combustion characteristics and particle number and size distribution emissions
Carmen C. Barrios et al.
FUEL (2014)
Diesel engine emissions and performance from blends of citrus sinensis biodiesel and diesel fuel
Gokhan Tuccar et al.
FUEL (2014)
Combustion and emissions characteristics of Diesel and soybean biodiesel over wide ranges of intake pressure and oxygen concentration in a compression-ignition engine at a light-load condition
Junghwan Kim et al.
FUEL (2014)
Finite-time thermodynamic modeling and analysis of an irreversible Miller cycle working on a four-stroke engine
Jiming Lin et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)
Biodiesel produced from crambe oil in Brazil-A study of performance and emissions in a diesel cycle engine generator
Helton Aparecido Rosa et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Performance Optimization of an Air-Standard Irreversible Dual-Atkinson Cycle Engine Based on the Ecological Coefficient of Performance Criterion
Guven Gonca et al.
SCIENTIFIC WORLD JOURNAL (2014)
Experimental and Computational Investigations for Combustion, Performance and Emission Parameters of a Diesel Engine Fueled with Soybean Biodiesel-Diesel Blends
Mohamed F. Al Dawody et al.
2013 INTERNATIONAL CONFERENCE ON ALTERNATIVE ENERGY IN DEVELOPING COUNTRIES AND EMERGING ECONOMIES (2013 AEDCEE) (2014)
A Study on Late Intake Valve Closing Miller Cycled Diesel Engine
Guven Gonca et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2013)
Performance maps for an air-standard irreversible Dual-Miller cycle (DMC) with late inlet valve closing (LIVC) version
Guven Gonca et al.
ENERGY (2013)
Emissions, performance and cylinder pressure of diesel engine fuelled by biodiesel fuel
Mohamed Saied Shehata
FUEL (2013)
Experimental investigation of performance, emission and combustion characteristics of an indirect injection multi-cylinder CI engine fuelled by blends of de-inking sludge pyrolysis oil with biodiesel
A. K. Hossain et al.
FUEL (2013)
Heat transfer effects on the performance of an air-standard irreversible dual cycle
Yasin Ust et al.
INTERNATIONAL JOURNAL OF VEHICLE DESIGN (2013)
Performance and emission characteristics of biodiesel from different origins: A review
Niraj Kumar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Performance analysis of an irreversible Miller cycle with considerations of relative air-fuel ratio and stroke length
Rahim Ebrahimi
APPLIED MATHEMATICAL MODELLING (2012)
Performance and exhaust emission characteristics of a CI engine fueled with biodiesel (fish oil) with DEE as additive
C. Swaminathan et al.
BIOMASS & BIOENERGY (2012)
Performance and emission characteristics of a diesel engine fuelled with biodiesel-ethanol and biodiesel-methanol blends at elevated air temperatures
Nadir Yilmaz
FUEL (2012)
Review of biodiesel composition, properties, and specifications
S. Kent Hoekman et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Performance of Diesel Engine Fuelled by a Biodiesel Extracted From A Waste Cocking Oil
Wail M. Adaileh et al.
TERRAGREEN 2012: CLEAN ENERGY SOLUTIONS FOR SUSTAINABLE ENVIRONMENT (CESSE) (2012)
Effects of Equivalence Ratio and Mean Piston Speed on Performance of an Irreversible Dual Cycle
R. Ebrahimi
ACTA PHYSICA POLONICA A (2011)
Thermodynamic modeling of performance of a Miller cycle with engine speed and variable specific heat ratio of working fluid
Rahim Ebrahimi
COMPUTERS & MATHEMATICS WITH APPLICATIONS (2011)
Crude palm oil fuel for diesel-engines: Experimental and ANN simulation approaches
T. F. Yusaf et al.
ENERGY (2011)
Emission and performance characteristics of an indirect ignition diesel engine fuelled with waste cooking oil
M. A. Kalam et al.
ENERGY (2011)
Effects of mean piston speed, equivalence ratio and cylinder wall temperature on performance of an Atkinson engine
Rahim Ebrahimi
MATHEMATICAL AND COMPUTER MODELLING (2011)
Performance evaluation of a diesel engine fueled with methyl ester of castor seed oil
N. L. Panwar et al.
APPLIED THERMAL ENGINEERING (2010)
Effects of combustion efficiency on a Dual cycle
Osman Azmi Ozsoysal
ENERGY CONVERSION AND MANAGEMENT (2009)
Finite-time thermodynamic modeling and analysis for an irreversible Dual cycle
Yanlin Ge et al.
MATHEMATICAL AND COMPUTER MODELLING (2009)
Finite-time thermodynamic modelling and analysis of an irreversible Otto-cycle
Yanlin Ge et al.
APPLIED ENERGY (2008)
The effects of preheated cottonseed oil methyl ester on the performance and exhaust emissions of a diesel engine
Murat Karabektas et al.
APPLIED THERMAL ENGINEERING (2008)
Effects of heat loss as percentage of fuel's energy, friction and variable specific heats of working fluid on performance of air standard Otto cycle
Jiann-Chang Lin et al.
ENERGY CONVERSION AND MANAGEMENT (2008)
Performance analysis of an irreversible Miller heat engine and its optimum criteria
Yingru Zhao et al.
APPLIED THERMAL ENGINEERING (2007)
Performance evaluation of irreversible Miller engine under various specific heat models
A. Al-Sarkhi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)
Experimental investigation of applying Miller cycle to reduce NOx emission from diesel engine
Y Wang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2005)
Optimal performance of an irreversible dual-cycle
LG Chen et al.
APPLIED ENERGY (2004)
Efficiency of Miller engine at maximum power density
A Al-Sarkhi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2002)