☆ 4.7 Article

Revealing the mechanism of stress rebound during discharging in lithium-ion batteries

JOURNAL OF ENERGY STORAGE (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Durable flexible dual-layer and free-standing silicon/carbon composite anode for lithium-ion batteries

Meng Zhang et al.

Summary: In this study, a flexible silicon/carbon composite with dual-layer was prepared by microelectronic printing technology and used as an anode for lithium-ion batteries. The composite material has a slit structure that provides elastic space to buffer volume expansion during lithiation/delithiation, and an amorphous carbon protective shell improves the structural stability and electrochemical performance. The experimental results show that the flexible anode exhibits high reversible capacity and good cyclic stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Chemistry, Physical

Impact of Bracing on Large Format Prismatic Lithium-Ion Battery Cells during Aging

Philip Daubinger et al.

Summary: The study found that applying external pressure through bracing can reduce lithium plating on the anode, but significant impacts were observed on cathode structural and morphological degradation.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Electrochemistry

Influence of external on silicon electrodes in lithium-ion cells

Mara Goettlinger et al.

Summary: The influence of external pressure on lithium-ion cells with a silicon anode is investigated. The main failure mechanism is found to be a continuous irreversible consumption of lithium ions, likely due to repeated solid electrolyte interphase breakage and reformation. Higher pressure leads to a greater impact on lithium depletion, which is mitigated by internal relithiation of the positive electrode using a lithium reservoir, allowing for 1000 cycles without capacity fading at high capacity.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Multidisciplinary Sciences

Onboard early detection and mitigation of lithium plating in fast-charging batteries

Wenxiao Huang et al.

Summary: This study demonstrates a nondestructive differential pressure sensing method for precise detection of lithium plating in fast-charging batteries. The method allows for early detection of the onset of lithium plating and can guide the development of fast-charging battery technologies.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Volume and thickness change of NMC811|SiOx-graphite large-format lithium-ion cells: from pouch cell to active material level

Hendrik Pegel et al.

Summary: In this study, the reversible thickness change and expansion of a large lithium-ion automotive pouch cell were investigated using an actively controlled pneumatic cell press. The contributions of the NMC811 cathode and SiOx -graphite composite anode to the expansion were resolved and validated. The results show that the Ni-rich cathodes have a significant impact on the cell expansion and exhibit nonlinear thickness change. The capacities of SiOx and graphite were determined and their volume expansion as a function of the anode state of charge was calculated. The correlation between the volume expansion of the active materials and the thickness change of the SiOx-Gr composite anode was investigated.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Review Chemistry, Physical

Porous Electrode Modeling and its Applications to Li-Ion Batteries

Zhiqiang Chen et al.

Summary: This review systematically summarizes and discusses the applications of the porous electrode model to Li-ion batteries (LIBs). The porous electrode model allows for the study of various internal battery properties and can predict battery degradation. With the help of state observers, the porous electrode model enables real-time monitoring for battery management systems.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Electrochemistry

A dual force cross-linked γ-PGA-PAA binder enhancing the cycle stability of silicon-based anodes for lithium-ion batteries

Ming-Jia Guo et al.

Summary: In this study, a natural polymer cross-linked binder, derived from poly-glutamic acid and poly-acrylic acid, was synthesized and applied to improve the cycling performance of Silicon (Si) anode materials. The cross-linked binder showed excellent adhesion to Si particles and enhanced the capacity retention and structural integrity of Si and SiO electrodes.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Chemistry, Physical

Stress evolution and thickness change of a lithium-ion pouch cell under various cycling conditions

Congrui Jin et al.

Summary: This study investigates the behavior of a single pouch cell during charge/discharge cycles by measuring stress and thickness changes. The results show that increasing the charge/discharge current generally decreases the stress increase percentage and increases the volume expansion percentage. Additionally, increasing the upper cutoff voltage generally increases the stress increase percentage and volume expansion percentage. These findings provide important insights for the design of battery packs.

JOURNAL OF POWER SOURCES ADVANCES (2022)

Add to Collection

Article Green & Sustainable Science & Technology

An improved single particle model for lithium-ion batteries based on main stress factor compensation

Jiaqiang Tian et al.

Summary: This study established a more accurate electrochemical model to investigate the impact of main stress factors on the polarization process of the battery. Experimental results showed that current and temperature are the main factors affecting the polarization of the cell.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Chemistry, Physical

Diverting Exploration of Silicon Anode into Practical Way: A Review Focused on Silicon-Graphite Composite for Lithium Ion Batteries

Peng Li et al.

Summary: This review highlights the necessity of co-exploitation of silicon and graphite, and systematically concludes the key issues, challenges, and perspectives of Si-graphite electrodes. Through a deep understanding of associated electrochemical processes, the component and structural optimization of Si-graphite anodes could be effectively enhanced.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Energy & Fuels

In-situ obtained internal strain and pressure of the cylindrical Li-ion battery cell with silicon-graphite negative electrodes

Shengxin Zhu et al.

Summary: In this study, an in-situ internal deformation measurement method was used to measure the circumferential strain of the 18650 LIB cell with different silicon content in the negative electrode, revealing that the internal strain is influenced by both electrode volume expansion and the gap between the jelly roll and steel case.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Electrochemistry

Electrochemically Stable In Situ Dilatometry of NMC, NCA and Graphite Electrodes for Lithium-Ion Cells Compared to XRD Measurements

Franz B. Spingler et al.

Summary: In this study, the thickness changes of electrodes during cycling were investigated using a dilatometry setup. The research found that electrode expansion does not necessarily correlate with the unit cell volume changes of its active materials in any meaningful way, and only by measuring the expansion of the full electrode can we fully understand and predict its behavior during cycling. The reliability of the dilation measurement and the electrochemical performance of the dilatometry setup were thoroughly validated and significantly exceeded those of related studies published in recent years.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

State of health prediction of lithium-ion batteries based on machine learning: Advances and perspectives

Xing Shu et al.

Summary: This paper explores the significance of accurate state of health (SOH) prediction for lithium-ion batteries, looking at the development of machine learning techniques in this area. It defines the concept of SOH, classifies prediction methods, surveys health feature extraction methods, conducts comparison, and discusses challenges and research directions for more reliable SOH prediction.

ISCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Mechanical behavior of Silicon-Graphite pouch cells under external compressive load: Implications and opportunities for battery pack design

Lysander De Sutter et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Energy & Fuels

A study of external surface pressure effects on the properties for lithium-ion pouch cells

Long Zhou et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection

Article Electrochemistry

Surface-Functionalized Graphite as Long Cycle Life Anode Materials for Lithium-Ion Batteries

Xiaohui Gong et al.

CHEMELECTROCHEM (2020)

Add to Collection

Article Engineering, Mechanical

The diffusion induced stress and cracking behaviour of primary particle for Li-ion battery electrode

Xuanchen Zhu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Silicon-Based Anode of Lithium Ion Battery Made of Nano Silicon Flakes Partially Encapsulated by Silicon Dioxide

Yonhua Tzeng et al.

NANOMATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In situ and Operando Tracking of Microstructure and Volume Evolution of Silicon Electrodes by using Synchrotron X-ray Imaging

Kang Dong et al.

CHEMSUSCHEM (2019)

Add to Collection

Review Chemistry, Physical

Lithium-ion batteries: outlook on present, future, and hybridized technologies

Taehoon Kim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Electrochemistry

Mechanistic Elucidation of Si Particle Morphology on Electrode Performance

Ankit Verma et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Abnormal self-discharge in lithium-ion batteries

Won Mo Seong et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Electrochemistry

Mechanical Failure Analysis of Graphite Anode Particles with PVDF Binders in Li-Ion Batteries

Noman Iqbal et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Electrochemistry

Volume, Pressure and Thickness Evolution of Li-Ion Pouch Cells with Silicon-Composite Negative Electrodes

A. J. Louli et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Review Green & Sustainable Science & Technology

China's energy storage industry: Develop status, existing problems and countermeasures

Hongwei Yu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Article Energy & Fuels

Online internal short circuit detection for a large format lithium ion battery

Xuning Feng et al.

APPLIED ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Understanding the dilation and dilation relaxation behavior of graphite-based lithium-ion cells

Marius Bauer et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Review Nanoscience & Nanotechnology

Promise and reality of post-lithium-ion batteries with high energy densities

Jang Wook Choi et al.

NATURE REVIEWS MATERIALS (2016)

Add to Collection

Article Electrochemistry

A Phenomenological Model of Bulk Force in a Li-Ion Battery Pack and Its Application to State of Charge Estimation

Shankar Mohan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Electrochemistry

Characterization of Lithium Insertion Electrodes by Precision Dilatometer: Area-Specific Deformation of Single Electrode

Masatoshi Nagayama et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Deformation and stress in electrode materials for Li-ion batteries

Amartya Mukhopadhyay et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Add to Collection

Review Chemistry, Physical

A review on the key issues for lithium-ion battery management in electric vehicles

Languang Lu et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Electrochemistry

Effect of Compressive Stress on Electrochemical Performance of Silicon Anodes

Daniela Molina Piper et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

Stress development due to surface processes in graphite electrodes for Li-ion batteries: A first report

Amartya Mukhopadhyay et al.

ELECTROCHIMICA ACTA (2012)

Add to Collection

Review Chemistry, Multidisciplinary

Designing nanostructured Si anodes for high energy lithium ion batteries

Hui Wu et al.

NANO TODAY (2012)

Add to Collection

Article Chemistry, Physical

A transmission electron microscopy study of crack formation and propagation in electrochemically cycled graphite electrode in lithium-ion cells

Sandeep Bhattacharya et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Electrochemistry

Single-Particle Model for a Lithium-Ion Cell: Thermal Behavior

Meng Guo et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Advanced Materials for Energy Storage

Chang Liu et al.

ADVANCED MATERIALS (2010)

Add to Collection

Article Physics, Applied

Stress generation in silicon particles during lithium insertion

Stephanie Golmon et al.

APPLIED PHYSICS LETTERS (2010)

Add to Collection

Review Chemistry, Physical

Challenges for Rechargeable Li Batteries

John B. Goodenough et al.

CHEMISTRY OF MATERIALS (2010)

Add to Collection

Article Electrochemistry

Theoretical Analysis of Stresses in a Lithium Ion Cell

Sindhuja Renganathan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Nano active materials for lithium-ion batteries

Yonggang Wang et al.

NANOSCALE (2010)

Add to Collection

Article Chemistry, Physical

Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation

Yang-Tse Cheng et al.

JOURNAL OF POWER SOURCES (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Nanostructured Silicon Anodes for Lithium Ion Rechargeable Batteries

Ranganath Teki et al.

SMALL (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.