☆ 4.8 Article

Development of conformal shell lattices via laser powder bed fusion and unraveling their mechanical responses via modeling and experiments

ADDITIVE MANUFACTURING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Enhancement in the mechanical behaviour of a Schwarz Primitive periodic minimal surface lattice structure design

Xiao Guo et al.

Summary: In this study, an improved Schwarz primitive lattice structure was proposed by redefining the original opening diameter with a shape parameter. Experimental results showed that the modified P lattice structure with a small opening diameter had increased Young's modulus, compressive strength, and energy absorption compared to the original P lattice structure.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-scale defects in powder-based additively manufactured metals and alloys

J. Fu et al.

Summary: This review paper addresses the formation, influence, and control of defects in powder-based metal additive manufacturing (AM). It classifies the defects into three categories: geometry-related, surface integrity-related, and microstructural defects, and discusses their root causes and influencing factors. The paper also introduces detection methods and modeling for these defects, and reviews their effects on the mechanical properties of AMed metallic components. Various control and mitigation methods are summarized and discussed. The research gaps and future prospects of the multi-scale AM defects are identified.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Improved light-weighting potential of SS316L triply periodic minimal surface shell lattices by micro laser powder bed fusion

Jin Fu et al.

Summary: This study successfully fabricated low-density triply periodic minimal surface (TPMS) shell lattices with smaller feature size using micro laser powder bed fusion (mu LPBF) technology. The compressive responses and lightweight potential of these TPMS structures were analyzed through quasi-static compression tests and finite element modeling. The results showed that the deformation mechanism changed from localized collapse to homogeneous bulk deformation with increasing relative density. Different types of TPMS structures exhibited varied mechanical properties and lightweight potential.

MATERIALS & DESIGN (2022)

Add to Collection

Article Mechanics

Design optimization of a novel bio-inspired 3D porous structure for crashworthiness

Hanfeng Yin et al.

Summary: A novel hierarchical three-dimensional porous (H3DP) structure inspired by bone in nature was created and showed excellent energy absorption capacity. Numerical simulation and experimental validation revealed that the crashworthiness of the H3DP structure is influenced by design parameters, and multi-objective optimization was conducted to obtain the optimal design.

COMPOSITE STRUCTURES (2021)

Add to Collection

Review Automation & Control Systems

Mechanical characterization and properties of laser-based powder bed-fused lattice structures: a review

Leonardo Riva et al.

Summary: The increasing demand for wider access to additive manufacturing technologies is driving the production of metal lattice structures with powder bed fusion techniques, especially laser-based powder bed fusion. Lattice structures are suitable for applications in aerospace, automotive, and biomedicine due to their tailored porosity, low weight, and tunable mechanical properties. Despite extensive studies on their physical and mechanical properties in recent years, there is still a lack of specific standards for their characterization.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication

M. Benedetti et al.

Summary: Metal additive manufacturing is now a mature technology that is being used to produce high-performance parts, including mission-critical components. The intentional design of porous metal structures, such as cellular or lattice structures, offers advantages in terms of specific mechanical or performance characteristics. While concerns over structural integrity remain, improvements in the manufacturing processes are leading to better fatigue properties for additively manufactured cellular structures.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)

Add to Collection

Article Engineering, Mechanical

Mechanical characteristics and deformation mechanism of functionally graded triply periodic minimal surface structures fabricated using stereolithography

Cheng Zhang et al.

Summary: Triply periodic minimal surface (TPMS) structures are widely used for their smooth surface and pore interconnectivity, and a novel design approach based on the log-sigmoid function has been proposed in this study. Functionally graded TPMS structures were successfully fabricated using stereolithography, with the I-WP type showing superior mechanical properties. The study revealed a combination of stretching-and bending-dominated failure deformations in these structures.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Chemistry, Analytical

Achieving Triply Periodic Minimal Surface Thin-Walled Structures by Micro Laser Powder Bed Fusion Process

Shuo Qu et al.

Summary: This study explores the fabrication method and properties of thin-walled structures (TWS) of TPMS lattice using micro LPBF technology and stainless steel 316L material. By optimizing parameters, cube samples with high relative density and low roughness can be produced, as well as thin-walled structures with a thickness of 100 microns. The TWS samples of TPMS lattice show significant improvement in heat dissipation performance.

MICROMACHINES (2021)

Add to Collection

Article Engineering, Civil

Mechanical analysis and modeling of metallic lattice sandwich additively fabricated by selective laser melting

Kai Wei et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Biomedical

Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties

Oraib Al-Ketan et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Crushing behavior and optimization of sheet-based 3D periodic cellular structures

Hanfeng Yin et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces

Miao Zhao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical and experimental studies on compressive behavior of Gyroid lattice cylindrical shells

Yongzhen Wang et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Engineering, Mechanical

Sheet and network based functionally graded lattice structures manufactured by selective laser melting: Design, mechanical properties, and simulation

Hailun Zhou et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical behavior of polymeric selective laser sintered ligament and sheet based lattices of triply periodic minimal surface architectures

Aliaa M. Abou-Ali et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Optics

Micro selective laser melting of NiTi shape memory alloy: Defects, microstructures and thermal/mechanical properties

Jin Fu et al.

OPTICS AND LASER TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Biomaterials

Formation of porous biodegradable scaffolds based on poly(propylene carbonate) using gas foaming technology

Iman Manavitehrani et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Engineering, Biomedical

From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials

S. M. Ahmadi et al.

ACTA BIOMATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of functionally graded TPMS structures fabricated by additive manufacturing

Shixiang Yu et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Smooth-shell metamaterials of cubic symmetry: Anisotropic elasticity, yield strength and specific energy absorption

Colin Bonatti et al.

ACTA MATERIALIA (2019)

Add to Collection

Review Materials Science, Multidisciplinary

SLM lattice structures: Properties, performance, applications and challenges

Tobias Maconachie et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microarchitected Stretching-Dominated Mechanical Metamaterials with Minimal Surface Topologies

Oraib Al-Ketan et al.

ADVANCED ENGINEERING MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties

Fei Liu et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Engineering, Mechanical

Anisotropic and asymmetrical yielding and its evolution in plastic deformation: Titanium tubular materials

H. Li et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Multidisciplinary Sciences

Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness

J. B. Berger et al.

NATURE (2017)

Add to Collection

Article Materials Science, Biomaterials

Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications

A. Yanez et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A New Type of Low Density Material: Shellular

Seung Chul Han et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Engineering, Biomedical

Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting

Chunze Yan et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Crushing analysis and multi-objective optimization design for bionic thin-walled structure

Hanfeng Yin et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Engineering, Manufacturing

An advanced multi-morphology porous scaffold design method using volumetric distance field and beta growth function

Dong-Jin Yoo et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)

Add to Collection

Article Mechanics

The stiffness and strength of the gyroid lattice

S. N. Khaderi et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting

Chunze Yan et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Engineering, Manufacturing

Advanced Projection Image Generation Algorithm for Fabrication of a Tissue Scaffold using Volumetric Distance Field

Dong-Jin Yoo

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)

Add to Collection

Article Engineering, Manufacturing

Heterogeneous porous scaffold design using the continuous transformations of triply periodic minimal surface models

Dong-Jin Yoo

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Electrochromism in Gyroid-Structured Vanadium Pentoxide

Maik R. J. Scherer et al.

ADVANCED MATERIALS (2012)

Add to Collection

Article Engineering, Manufacturing

Heterogeneous Porous Scaffold Design for Tissue Engineering Using Triply Periodic Minimal Surfaces

Dong-Jin Yoo

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.