4.6 Article

Improvement Breakdown Voltage by a Using Crown-Shaped Gate

Related references

Note: Only part of the references are listed.
Article Engineering, Electrical & Electronic

Numerical Analysis for a P-Drift Region N-IGBT With Enhanced Dynamic Electric Field Modulation Effect

Xiaorui Xu et al.

Summary: This article studies the physical mechanism and characteristics of the N-IGBT with PD-IGBT. By changing the main blocking junction from the emitter side to the collector side, the PD-IGBT enhances the dynamic electric field modulation and reduces turn-off loss and time. Moreover, the change in location of the blocking junction also optimizes the relationship between breakdown voltage and on-state voltage, leading to higher avalanche energy.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2022)

Article Chemistry, Analytical

Improvement in Turn-Off Loss of the Super Junction IGBT with Separated n-Buffer Layers

Ki Yeong Kim et al.

Summary: The study introduces a super junction insulated-gate bipolar transistor with separated n-buffer layers to improve turn-off characteristic while maintaining similar on-state characteristics and breakdown voltage. Simulation results show a 7% reduction in turn-off loss with a small increase in on-state voltage and minimal decrease in breakdown voltage.

MICROMACHINES (2021)

Proceedings Paper Materials Science, Multidisciplinary

Wide Band Gap semiconductor material for electric vehicle charger

J. S. Sakthi Suriya Raj et al.

Summary: This paper discusses the importance of electric vehicle charging systems and the use of Wide Band Gap Semiconductor Materials. It also compares the power losses of different materials in electric vehicle chargers.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Engineering, Electrical & Electronic

Recent advances and trend of HEV/EV-oriented power semiconductors - an overview

Guoyou Liu et al.

IET POWER ELECTRONICS (2020)

Article Computer Science, Information Systems

A Buck-Boost Transformerless DC-DC Converter Based on IGBT Modules for Fast Charge of Electric Vehicles

Borislav Dimitrov et al.

ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

Study on the IGBT Using a Deep Trench Filled With SiO2 and High-k Dielectric Film

Weizhen Chen et al.

IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY (2020)

Proceedings Paper Computer Science, Hardware & Architecture

Impact of three-dimensional current flow on accurate TCAD simulation for trench-gate IGBTs

Masahiro Watanabe et al.

2019 31ST INTERNATIONAL SYMPOSIUM ON POWER SEMICONDUCTOR DEVICES AND ICS (ISPSD) (2019)

Article Engineering, Electrical & Electronic

Low-Loss SOI-LIGBT With Triple Deep-Oxide Trenches

Long Zhang et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2017)

Article Engineering, Electrical & Electronic

4H-SiC Trench MOSFET With L-Shaped Gate

Qingwen Song et al.

IEEE ELECTRON DEVICE LETTERS (2016)

Article Engineering, Electrical & Electronic

Future trends in high-power bipolar metal-oxide semi-conductor controlled power semi-conductors

Munaf Rahimo

IET CIRCUITS DEVICES & SYSTEMS (2014)

Article Engineering, Manufacturing

Development of a 60μm Deep Trench and Refill Process for Manufacturing Si-Based High-Voltage Super-Junction Structures

Holger Bartolf et al.

IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING (2013)

Review Physics, Applied

Developments of plasma etching technology for fabricating semiconductor devices

Haruhiko Abe et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2008)

Article Engineering, Electrical & Electronic

Shielding region effects on a trench gate IGBT

Jong-Seok Lee et al.

MICROELECTRONICS JOURNAL (2008)

Article Engineering, Electrical & Electronic

An advanced reactive ion etching process for very high aspect-ratio sub-micron wide trenches in silicon

Reza Abdolvand et al.

SENSORS AND ACTUATORS A-PHYSICAL (2008)

Review Engineering, Electrical & Electronic

A review of IGBT models

K Sheng et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2000)