4.6 Review

Lithium in a Sustainable Circular Economy: A Comprehensive Review

Related references

Note: Only part of the references are listed.
Article Metallurgy & Metallurgical Engineering

Efficient recovery of lithium as Li2CO3 and cobalt as Co3O4 from spent lithium-ion batteries after leaching with p-toluene sulfonic acid

Jiadong Liu et al.

Summary: In this study, organic p-toluene sulfonic acid (PTSA) was used to recycle valuable Li and Co elements from spent lithium-ion batteries (LIBs) for battery raw material production. The recovery process was found to be efficient and environmentally friendly, making it of vital importance for proper treatment of spent LIBs.

HYDROMETALLURGY (2023)

Article Chemistry, Physical

Construction of truncated-octahedral LiMn2O4 for battery-like electrochemical lithium recovery from brine

Guolang Zhou et al.

Summary: The extraction of lithium from salt lakes or seawater has garnered global attention due to the skyrocketing demand for lithium products. The LiMn2O4-based electrochemical lithium recovery system, known for its high inserted capacity and low energy consumption, emerges as a frontrunner for commercial application. However, the surface properties of LiMn2O4 that enable Li diffusion also result in manganese dissolution, posing a great challenge to achieving high lithium inserted capacity and long lifespan concurrently. In this study, we tackle this issue by designing a truncated octahedral LiMn2O4 (Tr-oh LMO) where the dominant (111) facets minimize Mn dissolution while a small portion of (100) facets facilitates Li diffusion. As a result, this Tr-oh LMO-based electrochemical lithium recovery system exhibits excellent Li recovery performance with a high inserted capacity of 20.25 mg g-1 per cycle in simulated brine. Furthermore, the manganese dissolution rate per 30 cycles is only 0.44%, and the capacity maintains 85% of the initial value after 30 cycles. These promising findings accelerate the practical application of LiMn2O4 in electrochemical lithium recovery.

GREEN ENERGY & ENVIRONMENT (2023)

Article Engineering, Chemical

Precipitation of lithium phosphate from lithium solution by using sodium phosphate

Dong Ju Shin et al.

Summary: The precipitation of lithium into Li3PO4 by adding Na3PO4 was studied under different experimental conditions. The results showed that the mol equivalent ratio of Na3PO4, initial lithium concentration, initial pH, and temperature had significant effects on the precipitation efficiency of Li3PO4. Furthermore, the precipitation mechanism of Li3PO4 was investigated by monitoring the change of pH value over time. The final Li3PO4 product obtained had a purity of 99.1%.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2022)

Article Materials Science, Multidisciplinary

Novel approach for the synthesis and recovery of lithium carbonate using a pulsed laser irradiation technique

Shreyanka Shankar Naik et al.

Summary: A high crystalline lithium carbonate (Li2CO3) was synthesized using pulsed laser irradiation (PLI) technique without precipitating agents, confirming a monoclinic phase of Li2CO3 through XRD analysis. Micro-Raman, FE-SEM, and EDS mapping analyses provided further vibrational modes, surface morphology, and elemental composition, supporting the evidence of high purity Li2CO3 formation and a robust synthetic route capable of efficient lithium recovery from real samples.

MATERIALS LETTERS (2022)

Review Green & Sustainable Science & Technology

Electrochemical technologies for lithium recovery from liquid resources: A review

Jiajia Wang et al.

Summary: With the increasing presence of electronic products with lithium-ion batteries in our daily lives, there is a growing demand for lithium that cannot be met through traditional land-based resources. This has led to a focus on recovering lithium from alternative sources such as salt lakes, geothermal brines, and even seawater, with electrochemical technologies receiving attention for their time-saving, environmentally friendly, and efficient qualities.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Review Chemistry, Physical

Recent progress of magnetic field application in lithium-based batteries

Kang Shen et al.

Summary: Lithium-based batteries, such as lithium-ion, lithium-sulfur, and lithium-oxygen batteries, have shown promising improvements in electrochemical performance through the application of magnetic fields. However, there are still challenges to be addressed in utilizing magnetic fields for enhancing battery performance.

NANO ENERGY (2022)

Article Engineering, Chemical

Lithium recovery from brine: Recent developments and challenges

Abdullah Khalil et al.

Summary: Concentrated brine, as a by-product of desalination, is considered an important resource for lithium extraction. Significant progress has been made in recent years in the development of lithium extraction technologies, but challenges such as sustainability, cost, and technology still need to be addressed.

DESALINATION (2022)

Article Metallurgy & Metallurgical Engineering

Preparation of lithium carbonate from waste lithium solution through precipitation and wet conversion methods

Junho Shin et al.

Summary: This study successfully obtained high-purity lithium carbonate through reflux and carbonation methods by recycling lithium compounds from waste lithium solution, providing an alternative approach for the treatment and reuse of waste lithium solution.

HYDROMETALLURGY (2022)

Article Environmental Studies

Designing electric vehicle incentives to meet emission reduction targets

Yen-Chu Wu et al.

Summary: This study utilizes a mathematical model to optimize investment in charging infrastructure, aiming to promote the adoption of electric vehicles and reduce emissions. The findings suggest that rebates should be offered earlier than charging stations, availability of home charging affects consumer choices, and rebates are more effective for moderate drivers while charging stations should prioritize frequent drivers.

TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT (2022)

Article Energy & Fuels

Characterization of lithium-batteries for high power applications

Gabriele Bandini et al.

Summary: Lithium batteries are widely used in energy storage systems, portable electronics, and electric vehicles due to their high energy density and long service life. However, their use for high-power applications is limited by thermal management and reduced life concerns. This study proposes a method to operate commercial Lithium-ion cells as power-oriented devices, surpassing manufacturer specifications, with a novel internal resistance monitoring strategy to limit battery aging.

JOURNAL OF ENERGY STORAGE (2022)

Article Engineering, Environmental

Life cycle environmental impacts of current and future battery-grade lithium supply from brine and spodumene

Mudit Chordia et al.

RESOURCES CONSERVATION AND RECYCLING (2022)

Review Energy & Fuels

Review article Global warming potential of lithium-ion battery energy storage systems: A review

Moritz Gutsch et al.

Summary: Decentralized lithium-ion battery energy storage systems (BESS) can increase self-consumption for residential photovoltaic systems and help address electricity storage challenges in a low-carbon power sector. Life cycle assessments (LCA) are important for understanding the greenhouse gas emissions (GHG) associated with BESS. Surprisingly, BESSs using NMC had consistently lower emissions than BESSs using LFP. Photovoltaic systems used for charging the BESS contributed 40-70% to total GHG emissions.

JOURNAL OF ENERGY STORAGE (2022)

Article Engineering, Environmental

Downstream recovery of Li and value-added metals (Ni, Co, and Mn) from leach liquor of spent lithium-ion batteries using a membrane-integrated hybrid system

Ramesh Kumar et al.

Summary: A novel membrane-integrated hybrid system was developed for recycling valuable metals from discarded lithium-ion batteries and treating the resulting acidic leach liquor. The system demonstrated effective removal of iron and aluminum, and successful separation and concentration of metal ions for reuse. It also achieved crystallization and recovery of Li+.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Chemistry, Analytical

Review of spinel LiMn2O4 cathode materials under high cut-off voltage in lithium-ion batteries: Challenges and strategies

Z. Iskandar Radzi et al.

Summary: This article summarizes the failure mechanism of LiMn2O4, a cathode material for lithium-ion batteries. It focuses on the high voltage stability issue and proposes various modification strategies to achieve high-voltage LiMn2O4. The article also discusses prominent modification approaches for structural or electrolytes.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

Article Engineering, Environmental

Lithium extraction from shale gas flowback and produced water using H1.33Mn1.67O4 adsorbent

Lun Tian et al.

Summary: To meet the rapidly growing demand for lithium batteries, lithium was extracted and recovered for the first time from shale gas flowback and produced water (SGFPW) in the Sichuan Basin, China. Precipitation pre-treatment using Na2CO3 was employed to enhance the adsorption capacity and selectivity of lithium. H1.33Mn1.67O4 proved to be a promising adsorbent for lithium extraction, and precipitation before adsorption significantly improved its performance.

RESOURCES CONSERVATION AND RECYCLING (2022)

Review Energy & Fuels

Enhanced cathode materials for advanced lithium-ion batteries using nickel-rich and lithium/manganese-rich LiNixMnyCozO2

B. Jeevanantham et al.

Summary: Fossil fuel consumption has severe ecological effects on the world economy, making it important to develop environmentally friendly energy devices. Lithium-ion batteries offer high capacity and stability, but face challenges such as residual lithium deposition, ion mixing, and oxygen release. Doping and coating techniques can improve the efficiency and stability of the cathode, but there is no single solution to address all the drawbacks, necessitating the combination of multiple strategies.

JOURNAL OF ENERGY STORAGE (2022)

Article Chemistry, Multidisciplinary

Lithium recovery from production waste by thermal pre-treatment

Sandra Pavon et al.

Summary: Among the two types of lithium batteries, there has been a focus on recycling lithium from rechargeable lithium-ion batteries (LIB) rather than non-rechargeable primary batteries. However, through thermal conversion, the disposal of lithium from primary batteries can be reduced by converting it into battery-grade Li2CO3.

SUSTAINABLE CHEMISTRY AND PHARMACY (2022)

Review Environmental Sciences

A review of the application of cerium and lanthanum in phosphorus removal during wastewater treatment: Characteristics, mechanism, and recovery

George William Kajjumba et al.

Summary: Rare earth elements (REEs) show potential as adsorbents and coagulants in wastewater treatment. However, as coagulants, their performance is affected by species such as carbonates and sulfates, and the strong bond between REEs and phosphate makes phosphate recovery almost impractical.

CHEMOSPHERE (2022)

Article Environmental Sciences

Potential impact of the end-of-life batteries recycling of electric vehicles on lithium demand in China: 2010-2050

Donghai Qiao et al.

Summary: The analysis on future lithium demand shows that if recovered lithium cannot be used for new lithium battery manufacturing, the surplus resources may exceed the demand in the basic demand (BD) field. However, if recovered lithium can be reused for new battery manufacturing, it will be able to meet most of the future lithium demand.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Engineering, Environmental

Lithium recovery from hydraulic fracturing flowback and produced water using a selective ion exchange sorbent

Adam Seip et al.

Summary: Hydraulic fracturing wastewater can be used to recover lithium resources with manganese-based lithium sorbents, but organic molecules in the wastewater lead to sorbent loss during the process.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Application of cerium and lanthanum coagulants in wastewater treatment-A comparative assessment to magnesium, aluminum, and iron coagulants

George William Kajjumba et al.

Summary: This study examined the treatment of a centrate stream with lanthanides through coagulation, comparing their performance with other commonly used coagulants. Results showed that CeCl3, LaCl3, and Na2Al2O4 coagulants were effective in precipitating phosphate at various pH levels and were cost-effective. Lanthanides, particularly CeCl3 and LaCl3, outperformed other coagulants in phosphorus removal at a lower cost.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Metallurgy & Metallurgical Engineering

Leaching of lepidolite and recovery of lithium hydroxide from purified alkaline pressure leach liquor by phosphate precipitation and lime addition

James Mulwanda et al.

Summary: The study found that adjusting the concentration of NaOH, temperature, and stirring rate are crucial for improving the efficiency of lithium extraction from lepidolite. The addition of Ca(OH)2 aids in lithium leaching and reduces the concentrations of silicate and fluoride by forming solid phases. Under optimal conditions, most of the lithium can be recovered through precipitation and conversion, allowing for the recycling of NaOH.

HYDROMETALLURGY (2021)

Article Engineering, Chemical

Is lithium brine water?

Mojtaba Ejeian et al.

Summary: With the development of light and rechargeable batteries for electric vehicles, global demand for lithium has increased considerably in recent years. Concerns have been raised about potential irreversible damage to the environment from brine extraction operations in places like the Salar de Atacama in Northern Chile. However, differing opinions over the definition of water have hindered efforts to minimize the impacts of these operations.

DESALINATION (2021)

Article Engineering, Chemical

Selective sorbents for recovery of lithium ions by hybrid capacitive deionization

Anna Siekierka et al.

Summary: This study analyzed the structure, lithium capturing efficiency, and energy consumption of Li, Mn, and Ti spinel-type materials in the HCDI system, identifying the spinel with a Li:Mn:Ti ratio of 1:3:0.15 as the best material for lithium recovery. Testing with natural geothermal water showed a lithium capturing efficiency near 80% in 8 minutes, with separation factors for other cations over three times smaller.

DESALINATION (2021)

Article Engineering, Chemical

A closed-loop process for selective lithium recovery from brines via electrochemical and precipitation

Dongfu Liu et al.

Summary: This study developed a closed-loop process for efficient recovery of lithium from brines and production of high-purity Li2CO3, achieving energy efficiency and minimal waste generation.

DESALINATION (2021)

Article Engineering, Chemical

Facet engineered Li3PO4 for lithium recovery from brines

Dongfu Liu et al.

Summary: This study successfully enhanced lithium recovery efficiency from Salt Lake brine at low temperature and low lithium concentration using facet engineered Li3PO4 seeds, which showed comparable lithium recovery rate with high-temperature precipitation at 90 degrees C but significantly reduced reaction time.

DESALINATION (2021)

Review Geology

Lithium brine production, reserves, resources and exploration in Chile: An updated review

Jose Cabello

Summary: Analyzing several studies on Chile's lithium brine production, reserves, resources, and exploration helps to gain a better understanding of Chile's unique current situation and future prospects in this area.

ORE GEOLOGY REVIEWS (2021)

Article Engineering, Environmental

Energy, greenhouse gas, and water life cycle analysis of lithium carbonate and lithium hydroxide monohydrate from brine and ore resources and their use in lithium ion battery cathodes and lithium ion batteries

Jarod C. Kelly et al.

Summary: The study found that lithium carbonate and lithium hydroxide monohydrate produced from brine resources had lower life cycle greenhouse gas emissions and freshwater consumption per tonne compared to those produced from ore resources. Different lithium sources had an impact of up to 20% to 45% on greenhouse gas emissions for battery cathode materials and complete batteries.

RESOURCES CONSERVATION AND RECYCLING (2021)

Article Environmental Sciences

Performance of a double-slope solar still for the concentration of lithium rich brines with concomitant fresh water recovery

Celso F. Baspineiro et al.

Summary: The study conducted experimental and theoretical analysis on brine desalination using a double-slope Solar Still. Results showed that the Solar Still was capable of producing more distilled water compared to traditional open air evaporation, offering new possibilities for lithium recovery practices.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Engineering, Chemical

Recent advances in magnesium/lithium separation and lithium extraction technologies from salt lake brine

Ying Sun et al.

Summary: In recent years, there has been extensive research on technologies for extracting and separating magnesium/lithium from salt lake brines, including adsorption, membrane, electrochemical, and reaction-coupled methods. While various methods have different characteristics and adaptabilities, membrane methods have attracted attention due to their low energy consumption and high separation rates.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Crystallography

Study on the Synergistic Extraction of Lithium from Spent Lithium Cobalt Oxide Batteries by Molten Salt Electrolysis and Two-Step Precipitation Method

Hui Li et al.

Summary: This study focused on the extraction of valuable metals from spent lithium-ion batteries using oxalic acid and phosphate. The results showed high efficiency in calcium removal with oxalic acid and lithium precipitation with phosphate, resulting in regular spherical lithium phosphate crystals.

CRYSTALS (2021)

Review Metallurgy & Metallurgical Engineering

Processing of lithium ores: Industrial technologies and case studies - A review

Dmytro Yelatontsev et al.

Summary: There is a growing demand for lithium and its compounds, prompting advancements in production technologies. The current industrial methods mainly involve lime roasting and sulfuric acid treatment in countries like Russia, Kazakhstan, and Ukraine. Advances in roasting technology and autoclave leaching have significantly improved the overall efficiency of lithium production.

HYDROMETALLURGY (2021)

Article Chemistry, Physical

Recent advances in lithium-ion battery separators with reversible/irreversible thermal shutdown capability

Jiayi Li et al.

Summary: Advancements in separator technology for lithium-ion batteries have been developed to ensure safety, service life, and user experience. The focus is on incorporating thermal shutdown functions to prevent safety issues caused by elevated temperatures. Growing demand for recycling and sustainability has led to the development of functional separators with irreversible or reversible thermal shutdown ability for future utility and manufacture.

ENERGY STORAGE MATERIALS (2021)

Review Green & Sustainable Science & Technology

Challenges for sustainable lithium supply: A critical review

Amato Alessia et al.

Summary: This article provides a comprehensive evaluation of the lithium supply situation, discussing the environmental impacts of integrating primary production with urban mining strategies and proposing possible alternatives to improve the sustainability of the lithium recycling value chain.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Chemical

Lithium enrichment optimization from Dead Sea end brine by chemical precipitation technique

Ahmad Alsabbagh et al.

Summary: This study presents a promising approach for extracting lithium from Dead Sea brine with high Mg2+/Li+ ratio, using trisodium phosphate as a precipitating reagent. The optimization process resulted in enriching lithium concentrations from 30-40 mg/L to 1000-1700 mg/kg in the solid precipitate, with over 40% of lithium extracted. The effectiveness of the method was demonstrated by testing on synthetic brine, showing a 55% extraction rate and over 50 times enrichment in lithium concentration.

MINERALS ENGINEERING (2021)

Article Engineering, Chemical

Investigation of solution chemistry to enable efficient lithium recovery from low-concentration lithium-containing wastewater

Chunlong Zhao et al.

FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING (2020)

Article Metallurgy & Metallurgical Engineering

Enriching lithium and separating lithium to magnesium from sulfate type salt lake brine

Xuheng Liu et al.

HYDROMETALLURGY (2020)

Article Engineering, Environmental

Recycling of cathode from spent lithium iron phosphate batteries

Prasad Yadav et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Geochemistry & Geophysics

The Minerals of Lithium

Edward S. Grew

ELEMENTS (2020)

Article Geochemistry & Geophysics

Classification and Characteristics of Natural Lithium Resources

Robert J. Bowell et al.

ELEMENTS (2020)

Article Geochemistry & Geophysics

Solvent extraction of lithium from simulated shale gas produced water with a bifunctional ionic liquid

Guillaume Zante et al.

APPLIED GEOCHEMISTRY (2020)

Review Chemistry, Multidisciplinary

The Current Process for the Recycling of Spent Lithium Ion Batteries

Li-Feng Zhou et al.

FRONTIERS IN CHEMISTRY (2020)

Article Biochemistry & Molecular Biology

Removal of phosphate and nitrate ions from aqueous solution using La3+ incorporated chitosan biopolymeric matrix membrane

Perumal Karthikeyan et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Review Engineering, Chemical

Metal Recovery Using Oxalate Chemistry: A Technical Review

Ankit Verma et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Review Engineering, Chemical

Systematic review of lithium extraction from salt-lake brines via precipitation approaches

Ye Zhang et al.

MINERALS ENGINEERING (2019)

Editorial Material Chemistry, Physical

Lithium Recovery from Oil and Gas Produced Water: A Need for a Growing Energy Industry

Amit Kumar et al.

ACS ENERGY LETTERS (2019)

Review Engineering, Environmental

Produced water characteristics, treatment and reuse: A review

Mohammad A. Al-Ghouti et al.

JOURNAL OF WATER PROCESS ENGINEERING (2019)

Article Engineering, Environmental

Lithium Lithium ion-selective membrane with 2D subnanometer channels

Amir Razmjou et al.

WATER RESEARCH (2019)

Review Engineering, Chemical

The beneficiation of lithium minerals from hard rock ores: A review

Bogale Tadesse et al.

MINERALS ENGINEERING (2019)

Article Environmental Studies

Lithium mining: Accelerating the transition to sustainable energy

Jiri Sterba et al.

RESOURCES POLICY (2019)

Article Metallurgy & Metallurgical Engineering

Separating lithium and magnesium in brine by aluminum-based materials

Xuheng Liu et al.

HYDROMETALLURGY (2018)

Article Metallurgy & Metallurgical Engineering

Thermodynamic study on recovery of lithium using phosphate precipitation method

Chao Xiao et al.

HYDROMETALLURGY (2018)

Article Materials Science, Multidisciplinary

Recovery of Lithium as Li3PO4 from Waste Water in a LIB Recycling Process

Young-Jun Song

KOREAN JOURNAL OF METALS AND MATERIALS (2018)

Review Chemistry, Physical

Thermal runaway mechanism of lithium ion battery for electric vehicles: A review

Xuning Feng et al.

ENERGY STORAGE MATERIALS (2018)

Article Chemistry, Multidisciplinary

Recovery of Lithium, Nickel, Cobalt, and Manganese from Spent Lithium-Ion Batteries Using L-Tartaric Acid as a Leachant

Li-Po He et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Article Engineering, Environmental

Lithium Carbonate Recovery from Cathode Scrap of Spent Lithium-Ion Battery: A Closed-Loop Process

Wenfang Gao et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Review Engineering, Chemical

Recovery and recycling of lithium: A review

Basudev Swain

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Article Chemistry, Physical

Lithium market research - global supply, future demand and price development

Gunther Martin et al.

ENERGY STORAGE MATERIALS (2017)

Article Engineering, Environmental

Modelling global extraction, supply, price and depletion of the extractable geological resources with the LITHIUM model

Harald Ulrik Sverdrup

RESOURCES CONSERVATION AND RECYCLING (2016)

Article Engineering, Environmental

Use of mild organic acid reagents to recover the Co and Li from spent Li-ion batteries

Girish Praveen Nayaka et al.

WASTE MANAGEMENT (2016)

Article Engineering, Environmental

Novel approach to recover cobalt and lithium from spent lithium-ion battery using oxalic acid

Xianlai Zeng et al.

JOURNAL OF HAZARDOUS MATERIALS (2015)

Review Green & Sustainable Science & Technology

Electric vehicle battery technologies: From present state to future systems

Sergio Manzetti et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Metallurgy & Metallurgical Engineering

Extraction of lithium from salt lake brine by aluminum-based alloys

Yan-hong Li et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

Article Metallurgy & Metallurgical Engineering

Novel process for the extraction of lithium from β-spodumene by leaching with HF

Gustavo D. Rosales et al.

HYDROMETALLURGY (2014)

Article Engineering, Chemical

Systemic and Direct Production of Battery-Grade Lithium Carbonate from a Saline Lake

Zhenhua Xu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Article Engineering, Environmental

Using MCDA and GIS for hazardous waste landfill siting considering land scarcity for waste disposal

Giovanni De Feo et al.

WASTE MANAGEMENT (2014)

Article Energy & Fuels

Lithium availability and future production outlooks

Hanna Vikstrom et al.

APPLIED ENERGY (2013)

Article Environmental Sciences

Sustainable governance of scarce metals: The case of lithium

Timothy Prior et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2013)

Article Metallurgy & Metallurgical Engineering

Recovery of lithium from Uyuni salar brine

Jeon Woong An et al.

HYDROMETALLURGY (2012)

Article Engineering, Chemical

Processing of a Zimbabwean petalite to obtain lithium carbonate

O. Sitando et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2012)

Article Green & Sustainable Science & Technology

Environmental impacts of a transition toward e-mobility: the present and future role of lithium carbonate production

Anna Stamp et al.

JOURNAL OF CLEANER PRODUCTION (2012)

Review Green & Sustainable Science & Technology

Assessment of world lithium resources and consequences of their geographic distribution on the expected development of the electric vehicle industry

Camille Grosjean et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Review Green & Sustainable Science & Technology

Global warming mitigation and renewable energy policy development from the Kyoto Protocol to the Copenhagen Accord-A comment

Lee Chung Lau et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Article Biodiversity Conservation

The Lithium future-resources, recycling, and the environment

Thomas Cherico Wanger

CONSERVATION LETTERS (2011)

Article Chemistry, Physical

An overview on the current processes for the recycling of batteries

DCR Espinosa et al.

JOURNAL OF POWER SOURCES (2004)

Article Chemistry, Physical

Recycling of lithium ion cells and batteries

MJ Lain

JOURNAL OF POWER SOURCES (2001)