Related references
Note: Only part of the references are listed.Bioprinting: From Technique to Application in Tissue Engineering and Regenerative Medicine
Thais Vieira de Souza et al.
CURRENT MOLECULAR MEDICINE (2023)
Development of 3D printed drug-eluting contact lenses
Youssra Moustafa Gadelkareem Mohamdeen et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2022)
Peptides as 3D printable feedstocks: Design strategies and emerging applications
Robert D. Murphy et al.
PROGRESS IN POLYMER SCIENCE (2022)
Quality of FDM 3D Printed Medicines for Pediatrics: Considerations for Formulation Development, Filament Extrusion, Printing Process and Printer Design
Julian Quodbach et al.
THERAPEUTIC INNOVATION & REGULATORY SCIENCE (2022)
Review on Multicomponent Hydrogel Bioinks Based on Natural Biomaterials for Bioprinting 3D Liver Tissues
Daekeun Kim et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)
3D-Printed Porous Scaffolds of Hydrogels Modified with TGF-β1 Binding Peptides to Promote In Vivo Cartilage Regeneration and Animal Gait Restoration
Xiaoquan Ding et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
Stem Cell-Seeded 3D-Printed Scaffolds Combined with Self-Assembling Peptides for Bone Defect Repair
Haixia Xu et al.
TISSUE ENGINEERING PART A (2022)
Ultrasmall superparamagnetic iron oxide nanoparticles: A next generation contrast agent for magnetic resonance imaging
Can Chen et al.
WILEY INTERDISCIPLINARY REVIEWS-NANOMEDICINE AND NANOBIOTECHNOLOGY (2022)
Compatibility and stability studies involving polymers used in fused deposition modeling 3D printing of medicines
Ihatanderson A. Silva et al.
JOURNAL OF PHARMACEUTICAL ANALYSIS (2022)
3D Printed Mini-Floating-Polypill for Parkinson's Disease: Combination of Levodopa, Benserazide, and Pramipexole in Various Dosing for Personalized Therapy
Hellen Windolf et al.
PHARMACEUTICS (2022)
Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment
Azizah M. Malebari et al.
PHARMACEUTICALS (2022)
Redispersible 3D printed nanomedicines: An original application of the semisolid extrusion technique
Thayse Viana de Oliveira et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)
In vivo study of dual functionalized mussel-derived bioactive peptides promoting 3D-printed porous Ti6Al4V scaffolds for repair of rabbit femoral defects
Run Ze Zhang et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2022)
Surgical guides for flapless dental implant placement and immediate definitive prosthesis installation by using selective laser melting and sintering for 3D metal and polymer printing: A clinical report
Giovanni de A.P. Di Giacomo et al.
JOURNAL OF PROSTHETIC DENTISTRY (2022)
Modeling multi-organ systems on a chip
Nina Vogt
NATURE METHODS (2022)
A human kidney and liver organoid-based multi-organ-on-a-chip model to study the therapeutic effects and biodistribution of mesenchymal stromal cell-derived extracellular vesicles
Vivian V. T. Nguyen et al.
JOURNAL OF EXTRACELLULAR VESICLES (2022)
Preferences of Healthcare Professionals on 3D-Printed Tablets: A Pilot Study
Odelia Goh et al.
PHARMACEUTICS (2022)
Bioinspired Protein/Peptide Loaded 3D Printed PLGA Scaffold Promotes Bone Regeneration
Xiaoliang Song et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)
A multi-organ-on-chip to recapitulate the infiltration and the cytotoxic activity of circulating NK cells in 3D matrix-based tumor model
Monica Marzagalli et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)
3D and 4D Printing in the Fight against Breast Cancer
Sofia Moroni et al.
BIOSENSORS-BASEL (2022)
Continuous Manufacturing and Molecular Modeling of Pharmaceutical Amorphous Solid Dispersions
Amritha G. Nambiar et al.
AAPS PHARMSCITECH (2022)
A microfluidic approach to fabricate sucrose decorated liposomes with increased uptake in breast cancer cells
Shiva Khorshid et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2022)
On-demand delivery of protein drug from 3D-printed implants
Dongyoon Kim et al.
JOURNAL OF CONTROLLED RELEASE (2022)
3D Printed Composite Scaffolds of GelMA and Hydroxyapatite Nanopowders Doped with Mg/Zn Ions to Evaluate the Expression of Genes and Proteins of Osteogenic Markers
Rebeca Leu Alexa et al.
NANOMATERIALS (2022)
Microfluidic Manufacture of Lipid-Based Nanomedicines
Karim Osouli-Bostanabad et al.
PHARMACEUTICS (2022)
Drug Stability: ICH versus Accelerated Predictive Stability Studies
Olga Gonzalez-Gonzalez et al.
PHARMACEUTICS (2022)
Solid Nanomedicines of Nifurtimox and Benznidazole for the Oral Treatment of Chagas Disease
Miriam Rolon et al.
PHARMACEUTICS (2022)
3D Bioprinted Chitosan-Based Hydrogel Scaffolds in Tissue Engineering and Localised Drug Delivery
Maria Lazaridou et al.
PHARMACEUTICS (2022)
Formulation of a 3D Printed Biopharmaceutical: The Development of an Alkaline Phosphatase Containing Tablet with Ileo-Colonic Release Profile to Treat Ulcerative Colitis
Khanh T. T. Nguyen et al.
PHARMACEUTICS (2022)
Zinc-Based Biodegradable Materials for Orthopaedic Internal Fixation
Yang Liu et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2022)
Preformulation Studies to Guide the Production of Medicines by Fused Deposition Modeling 3D Printing
Ludmila A. G. Pinho et al.
AAPS PHARMSCITECH (2021)
3D printing for polymer/particle-based processing: A review
Weiheng Xu et al.
COMPOSITES PART B-ENGINEERING (2021)
Pressure-assisted microsyringe 3D printing of oral films based on pullulan and hydroxypropyl methylcellulose
M. Elbadawi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Stereolithography (SLA) 3D printing of a bladder device for intravesical drug delivery
Xiaoyan Xu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
3D Printed Contact Lenses
Fahad Alam et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)
3D Printing and Nanotechnology: A Multiscale Alliance in Personalized Medicine
Juliana dos Santos et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Multifunctional 3D printed porous GelMA/xanthan gum based dressing with biofilm control and wound healing activity
Zhenming Yang et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
3D printed microneedles for transdermal drug delivery: A brief review of two decades
Nafiseh Elahpour et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Microfluidics for nanomedicines manufacturing: An affordable and low-cost 3D printing approach
Mattia Tiboni et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D printed spherical mini-tablets: Geometry versus composition effects in controlling dissolution from personalised solid dosage forms
Sejad Ayyoubi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D printing of patient-tailored SNEDDS-based suppositories of lidocaine
Aikaterini-Theodora Chatzitaki et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2021)
3D Printing in Development of Nanomedicines
Keerti Jain et al.
NANOMATERIALS (2021)
Preparation of High-Drug-Loaded Clarithromycin Gastric-Floating Sustained-Release Tablets Using 3D Printing
Peihong Chen et al.
AAPS PHARMSCITECH (2021)
A 3D-Printed Polymer-Lipid-Hybrid Tablet towards the Development of Bespoke SMEDDS Formulations
Bryce W. Barber et al.
PHARMACEUTICS (2021)
Engineering 3D Printed Microfluidic Chips for the Fabrication of Nanomedicines
Aytug Kara et al.
PHARMACEUTICS (2021)
Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets
Sergio A. Sanchez-Guirales et al.
PHARMACEUTICS (2021)
Influence of Print Settings on the Critical Quality Attributes of Extrusion-Based 3D-Printed Caplets: A Quality-by-Design Approach
Silke Henry et al.
PHARMACEUTICS (2021)
Semi-solid extrusion 3D printing in drug delivery and biomedicine: Personalised solutions for healthcare challenges
Iria Seoane-Viano et al.
JOURNAL OF CONTROLLED RELEASE (2021)
3D Printed Integrated Multi-Layer Microfluidic Chips for Ultra-High Volumetric Throughput Nanoliposome Preparation
Han Shan et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)
Manufacturing of 3D-Printed Microfluidic Devices for the Synthesis of Drug-Loaded Liposomal Formulations
Giulia Ballacchino et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)
3D printed hollow microneedles array using stereolithography for efficient transdermal delivery of rifampicin
Vivek Yadav et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
3D Printing and Dissolution Testing of Novel Capsule Shells for Use in Delivering Acetaminophen
Shantanu G. Gaurkhede et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Mimicking bone microenvironment: 2D and 3D in vitro models of human osteoblasts
I Yuste et al.
PHARMACOLOGICAL RESEARCH (2021)
3D Printing of Dapagliflozin Containing Self-Nanoemulsifying Tablets: Formulation Design and In Vitro Characterization
Mohammed S. Algahtani et al.
PHARMACEUTICS (2021)
Selective Laser Sintering (SLS), a New Chapter in the Production of Solid Oral Forms (SOFs) by 3D Printing
Yanis A. Gueche et al.
PHARMACEUTICS (2021)
Direct Powder Extrusion 3D Printing of Praziquantel to Overcome Neglected Disease Formulation Challenges in Paediatric Populations
Janine Boniatti et al.
PHARMACEUTICS (2021)
Direct Powder Extrusion of Paracetamol Loaded Mixtures for 3D Printed Pharmaceutics for Personalized Medicine via Low Temperature Thermal Processing
Xabier Mendibil et al.
PHARMACEUTICS (2021)
Galenic Lab-on-a-Chip concept for lipid nanocapsules production
Nicolas Rolley et al.
NANOSCALE (2021)
3D Bioprinting at the Frontier of Regenerative Medicine, Pharmaceutical, and Food Industries
Qasem Ramadan et al.
FRONTIERS IN MEDICAL TECHNOLOGY (2021)
Transferosomes as nanocarriers for drugs across the skin: Quality by design from lab to industrial scale
Raquel Fernandez-Garcia et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
3D printing of multilayered orodispersible films with in-process drying
Jan Elbl et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Design of a patient-specific mandible reconstruction implant with dental prosthesis for metal 3D printing using integrated weighted topology optimization and finite element analysis
Chia-Hsuan Li et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
3D printed microneedles for anticancer therapy of skin tumours
Md Jasim Uddin et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel
Damir Godec et al.
MATERIALS (2020)
3D Printed Tablets (Printlets) with Braille and Moon Patterns for Visually Impaired Patients
Atheer Awad et al.
PHARMACEUTICS (2020)
Printability of External and Internal Structures Based on Digital Light Processing 3D Printing Technique
Yan Yang et al.
PHARMACEUTICS (2020)
Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials-Process Perspective
Mohammad A. Azad et al.
PHARMACEUTICS (2020)
A multi-organ-chip co-culture of liver and testis equivalents: a first step toward a systemic male reprotoxicity model
Y. Baert et al.
HUMAN REPRODUCTION (2020)
Effects of Filament Extrusion, 3D Printing and Hot-Pressing on Electrical and Tensile Properties of Poly(Lactic) Acid Composites Filled with Carbon Nanotubes and Graphene
Giovanni Spinelli et al.
NANOMATERIALS (2020)
Special Issue: Ti-Based Biomaterials: Synthesis, Properties and Applications
Jaroslaw Jakubowicz
MATERIALS (2020)
Personalised 3D Printed Medicines: Optimising Material Properties for Successful Passive Diffusion Loading of Filaments for Fused Deposition Modelling of Solid Dosage Forms
Jose R. Cerda et al.
PHARMACEUTICS (2020)
3D-printed microfluidic chip for the preparation of glycyrrhetinic acid-loaded ethanolic liposomes
Mattia Tiboni et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Stereolithography (SLA) 3D printing of ascorbic acid loaded hydrogels: A controlled release study
Ilbey Karakurt et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Oral Fixed-Dose Combination Pharmaceutical Products: Industrial Manufacturing Versus Personalized 3D Printing
Raquel Fernandez-Garcia et al.
PHARMACEUTICAL RESEARCH (2020)
Topical buparvaquone nano-enabled hydrogels for cutaneous leishmaniasis
Aikaterini Lalatsa et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Ultradeformable Lipid Vesicles Localize Amphotericin B in the Dermis for the Treatment of Infectious Skin Diseases
Raquel Fernandez-Garcia et al.
ACS INFECTIOUS DISEASES (2020)
3D bioprinting dual-factor releasing and gradient-structured constructs ready to implant for anisotropic cartilage regeneration
Ye Sun et al.
SCIENCE ADVANCES (2020)
Immobilization of BMP-2-derived peptides on 3D-printed porous scaffolds for enhanced osteogenesis
Xiashiyao Zhang et al.
BIOMEDICAL MATERIALS (2020)
A modular 3D printed lab-on-a-chip for early cancer detection
Alessandro Chiado et al.
LAB ON A CHIP (2020)
'Temporary Plasticiser': A novel solution to fabricate 3D printed patient-centred cardiovascular 'Polypill' architectures
Beatriz C. Pereira et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Liposomes produced by microfluidics and extrusion: A comparison for scale-up purposes
Vidhi M. Shah et al.
NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2019)
High Throughput Nanoliposome Formation Using 3D Printed Microfluidic Flow Focusing Chips
Zhu Chen et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
Atheer Awad et al.
PHARMACEUTICS (2019)
Liposome-Encapsulated Curcumin-Loaded 3D Printed Scaffold for Bone Tissue Engineering
Naboneeta Sarkar et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Development of a 3D-Printed Drug-Eluting Stent for Treating Obstructive Salivary Gland Disease
Tae Ho Kim et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Predicting the critical quality attributes of ibuprofen tablets via modelling of process parameters for roller compaction and tabletting
Antonio Matji et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
Pamela Robles-Martinez et al.
PHARMACEUTICS (2019)
Designing Fast-Dissolving Orodispersible Films of Amphotericin B for Oropharyngeal Candidiasis
Dolores R. Serrano et al.
PHARMACEUTICS (2019)
Repurposing Butenafine as An Oral Nanomedicine for Visceral Leishmaniasis
Adriana Bezerra-Souza et al.
PHARMACEUTICS (2019)
Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Track-and-trace: Novel anti-counterfeit measures for 3D printed personalized drug products using smart material inks
Sarah J. Trenfield et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Formulation and manufacturing of lymphatic targeting liposomes using microfluidics
Swapnil Khadke et al.
JOURNAL OF CONTROLLED RELEASE (2019)
Fabrication of Muco-Adhesive Oral Films by the 3D Printing of Hydroxypropyl Methylcellulose-Based Catechin-Loaded Formulations
Tatsuaki Tagami et al.
BIOLOGICAL & PHARMACEUTICAL BULLETIN (2019)
A 3D printed chitosan-pectin hydrogel wound dressing for lidocaine hydrochloride delivery
Jingjunjiao Long et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
E-Jet 3D-Printed Scaffolds as Sustained Multi-Drug Delivery Vehicles in Breast Cancer Therapy
Xiaoyin Qiao et al.
PHARMACEUTICAL RESEARCH (2019)
Biodegradable magnesium alloys as temporary orthopaedic implants: a review
Sepideh Kamrani et al.
BIOMETALS (2019)
A simple procedure to produce FDM-based 3D-printed microfluidic devices with an integrated PMMA optical window
Lucas P. Bressan et al.
ANALYTICAL METHODS (2019)
A definition of bioinks and their distinction from biomaterial inks
J. Groll et al.
BIOFABRICATION (2019)
Herringbone-Patterned 3D-Printed Devices as Alternatives to Microfluidics for Reproducible Production of Lipid Polymer Hybrid Nanoparticles
Anuja Bokare et al.
ACS OMEGA (2019)
Transforming nanomedicine manufacturing toward Quality by Design and microfluidics
Stefano Colombo et al.
ADVANCED DRUG DELIVERY REVIEWS (2018)
Optimising the in vitro and in vivo performance of oral cocrystal formulations via spray coating
Dolores R. Serrano et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2018)
The importance of microfluidics for the preparation of nanoparticles as advanced drug delivery systems
Joao Pedro Martins et al.
EXPERT OPINION ON DRUG DELIVERY (2018)
3D printed microneedles for insulin skin delivery
Cristiane Patricia Pissinato Pere et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of vaginal rings with personalized shapes for controlled release of progesterone
Junhui Fu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Production of cocrystals in an excipient matrix by spray drying
David Walsh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Orally Bioavailable and Effective Buparvaquone Lipid-Based Nanomedicines for Visceral Leishmaniasis
Lindsay Smith et al.
MOLECULAR PHARMACEUTICS (2018)
Formulation development and process analysis of drug-loaded filaments manufactured via hot-melt extrusion for 3D-printing of medicines
Carolin Korte et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2018)
Drug Delivery Nanosystems for the Localized Treatment of Glioblastoma Multiforme
L. Nam et al.
MATERIALS (2018)
Current Trends and Challenges in the Clinical Translation of Nanoparticulate Nanomedicines: Pathways for Translational Development and Commercialization
Susan Hua et al.
FRONTIERS IN PHARMACOLOGY (2018)
3D-printed bioabsordable polycaprolactone stent: The effect of process parameters on its physical features
Antonio J. Guerra et al.
MATERIALS & DESIGN (2018)
Three-Dimensional Printing and Cell Therapy for Wound Repair
Sylvia van Kogelenberg et al.
ADVANCES IN WOUND CARE (2018)
Engineering of pharmaceutical cocrystals in an excipient matrix: Spray drying versus hot melt extrusion
David Walsh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Nanomedicine: Principles, Properties, and Regulatory Issues
Sara Soares et al.
FRONTIERS IN CHEMISTRY (2018)
Implantable Polymeric Drug Delivery Devices: Classification, Manufacture, Materials, and Clinical Applications
Sarah A. Stewart et al.
POLYMERS (2018)
Assessing the Reusability of 3D-Printed Photopolymer Microfluidic Chips for Urine Processing
Eric Lepowsky et al.
MICROMACHINES (2018)
A Review of Current Methods in Microfluidic Device Fabrication and Future Commercialization Prospects
Bruce K. Gale et al.
INVENTIONS (2018)
Analgesic and anti-inflammatory controlled-released injectable microemulsion: Pseudo-ternary phase diagrams, in vitro, ex vivo and in vivo evaluation
Isabel Pineros et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2017)
Clinical and Histologic Evaluations of SLA Dental Implants
Myron Nevins et al.
INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY (2017)
Patient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings
Zaid Muwaffak et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Patient acceptability of 3D printed medicines
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Unmet clinical needs in the treatment of systemic fungal infections: The role of amphotericin B and drug targeting
Raquel Fernandez-Garcia et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Oral amphotericin B: The journey from bench to market
Dolores R. Serrano et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2017)
Engineering Oral and Parenteral Amorphous Amphotericin B Formulations against Experimental Trypanosoma cruzi Infections
Miriam Rolon et al.
MOLECULAR PHARMACEUTICS (2017)
Enabling personalized medicine in Europe by the European Commission's funding activities
Elmar Nimmesgern et al.
PERSONALIZED MEDICINE (2017)
Bioprinting and Organ-on-Chip Applications Towards Personalized Medicine for Bone Diseases
Chiara Arrigoni et al.
STEM CELL REVIEWS AND REPORTS (2017)
Bioprinting and Organ-on-Chip Applications Towards Personalized Medicine for Bone Diseases
Chiara Arrigoni et al.
STEM CELL REVIEWS AND REPORTS (2017)
Cocrystal habit engineering to improve drug dissolution and alter derived powder properties
Dolores R. Serrano et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2016)
Developing transcutaneous nanoenabled anaesthetics for eyelid surgery
Aikaterini Lalatsa et al.
BRITISH JOURNAL OF OPHTHALMOLOGY (2016)
Modelling and shadowgraph imaging of cocrystal dissolution and assessment of in vitro antimicrobial activity for sulfadimidine/4-aminosalicylic acid cocrystals
Dolores. R. Serrano et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Jie Wang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Microfluidics: a transformational tool for nanomedicine development and production
Shyam Garg et al.
JOURNAL OF DRUG TARGETING (2016)
Lomustine Nanoparticles Enable Both Bone Marrow Sparing and High Brain Drug Levels - A Strategy for Brain Cancer Treatments
Funmilola A. Fisusi et al.
PHARMACEUTICAL RESEARCH (2016)
3D-printed microfluidic chips with patterned, cell-laden hydrogel constructs
Stephanie Knowlton et al.
BIOFABRICATION (2016)
Emerging Nanonisation Technologies: Tailoring Crystalline Versus Amorphous Nanomaterials
Dolores R. Serrano et al.
CURRENT TOPICS IN MEDICINAL CHEMISTRY (2015)
A controlled antibiotic release system to prevent orthopedic-implant associated infections: An in vitro study
Marina Gimeno et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Chitosan amphiphile coating of peptide nanofibres reduces liver uptake and delivers the peptide to the brain on intravenous administration
A. Lalatsa et al.
JOURNAL OF CONTROLLED RELEASE (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
Iron and iron-based alloys for temporary cardiovascular applications
A. Francis et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2015)
Polymorphism in Sulfadimidine/4-Aminosalicylic Acid Cocrystals: Solid-State Characterization and Physicochemical Properties
Christine Grossjohann et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
Oral Particle Uptake and Organ Targeting Drives the Activity of Amphotericin B Nanoparticles
Dolores R. Serrano et al.
MOLECULAR PHARMACEUTICS (2015)
Cost-effectiveness of nanomedicine: the path to a future successful and dominant market?
Rita Bosetti
NANOMEDICINE (2015)
Nanomedicine Scale-up Technologies: Feasibilities and Challenges
Rishi Paliwal et al.
AAPS PHARMSCITECH (2014)
New amphotericin B-gamma cyclodextrin formulation for topical use with synergistic activity against diverse fungal species and Leishmania spp.
Helga K. Ruiz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Hemolytic and pharmacokinetic studies of liposomal and particulate amphotericin B formulations
Dolores R. Serrano et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
Peptide pills for brain diseases? Reality and future perspectives
Dolores Remedios Serrano Lopez et al.
THERAPEUTIC DELIVERY (2013)
Novel Self-Nanoemulsifying Drug Delivery Systems (SNEDDS) for Oral Delivery of Cinnarizine: Design, Optimization, and In-Vitro Assessment
Ahmad Abdul-Wahhab Shahba et al.
AAPS PHARMSCITECH (2012)
A novel formulation of solubilised amphotericin B designed for ophthalmic use
D. R. Serrano et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
Nickel-free austenitic stainless steels for medical applications
Ke Yang et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2010)
In vitro and in vivo studies on the toxicity of dental resin components: a review
Michel Goldberg
CLINICAL ORAL INVESTIGATIONS (2008)
The resin monomer triethylene glycol dimethacrylate exhibits reproductive toxicity in male mice
H Darmani et al.
REPRODUCTION FERTILITY AND DEVELOPMENT (2005)
Project, design, and use of a pilot plant for nanocapsule production
AP Colombo et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2001)