Related references
Note: Only part of the references are listed.
Article
Engineering, Multidisciplinary
Daniel Garcia-Gonzalez et al.
Summary: This study proposes a new concept of self-healing soft material that can heal after rupture without external actuation. By filling a sticky and soft elastomeric matrix with hard-magnetic particles, the material can close cracks when the ruptured parts are approached to each other. Experimental results show that the proposed soft materials can sustain mechanical loading beyond 20% strains after several fracture cycles without compromising the structural integrity.
COMPOSITES PART B-ENGINEERING
(2023)
Article
Chemistry, Multidisciplinary
Ugur Bozuyuk et al.
Summary: The FePt magnetic coating significantly enhanced both the magnetic performance and biocompatibility of the microrollers, allowing for multimodal medical imaging without additional contrast agents. FePt-coated microrollers demonstrated the ability to move upstream against high flow velocities and showcased great potential for navigation control in the circulatory system for future in vivo applications.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Review
Mechanics
Sergio Lucarini et al.
Summary: Hard-magnetic soft composites, composed of magneto-active polymers and hard-magnetic particles, have seen significant advancements in recent years. The ability to control ferromagnetic patterns during manufacturing process has opened up new opportunities for designing smart components in biomedical engineering and soft robotics fields.
COMPOSITE STRUCTURES
(2022)
Article
Mechanics
Dipayan Mukherjee et al.
Summary: This work presents a unified modeling framework for both hard and soft magnetorheological elastomers (MREs), including the response of soft MREs as a limiting case. The proposed framework provides efficient numerical solutions for boundary value problems involving both hard and soft MREs. The calculations for the deflection of a pre-magnetized cantilever show excellent agreement with experimental data. The analysis also demonstrates the effects of pre-magnetization profiling and particle concentration on the actuation performance and residual magnetic field of the MRE structures.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
(2022)
Article
Materials Science, Multidisciplinary
Bowen Yao et al.
Summary: Compared to conventional rigid electronics, polymer-based soft electronics that conform to irregular shapes of organisms have advantages in long-term bio-interface interactions. However, the current polymer materials are unstable in alkaline environments, reductants, and applied voltage, leading to performance deterioration. This study proposes a coating strategy using reduced-graphene-oxide thin layers to enhance stability and conductivity.
Review
Chemistry, Multidisciplinary
M. A. S. R. Saadi et al.
Summary: Direct ink writing (DIW) is a versatile 3D printing technique that allows printing of a wide range of materials. This comprehensive review explores the process of DIW printing of complex 3D structures and discusses its diverse applications in various industries.
ADVANCED MATERIALS
(2022)
Article
Engineering, Multidisciplinary
M. Rambausek et al.
Summary: This study presents a comprehensive theoretical and numerical framework for modeling finite strain magnetorheological elastomers (MREs). Two software implementations are developed and the numerical schemes used for simulating the surrounding air are analyzed. The results show significant viscoelastic effects under high-rate magnetic fields, and strong coupling between viscoelasticity and magnetization rotation.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
(2022)
Article
Multidisciplinary Sciences
Zemin Liu et al.
Summary: The authors propose a molding-integrated direct laser writing fabrication protocol to create 3D micron-scale devices with programmable magnetization and multi-material integration. This method enables diverse motions and functionalities, showcasing its versatility in various fields such as healthcare, robotics, metamaterials, microfluidics, and programmable matter.
NATURE COMMUNICATIONS
(2022)
Article
Multidisciplinary Sciences
Yingdan Wu et al.
Summary: A fundamental peeling-and-loading mechanism is reported in this study, enabling untethered soft-bodied robots to climb 3D surfaces by utilizing both soft-body deformation and whole-body motion under external magnetic fields. The mechanism allows vertical and inverted surface climbing on diverse 3D surfaces with complex geometries and different surface properties.
Article
Robotics
Yoonho Kim et al.
Article
Materials Science, Multidisciplinary
Miguel Angel Moreno-Mateos et al.
Summary: Biological cells and tissues are influenced by mechanical stress and strain from their surrounding substrate. A new experimental system using soft magneto-active polymers allows for controlled deformation of substrates, enabling the study of mechanobiological processes. The system has shown versatility in reproducing complex mechanical scenarios and transmitting physiologically relevant forces.
APPLIED MATERIALS TODAY
(2022)
Article
Materials Science, Multidisciplinary
Ebrahim Yarali et al.
Summary: Magneto-/ electro-responsive polymers (MERPs) are stimuli-responsive materials that exhibit multifunctional and dynamic properties when triggered by external magnetic/ electric fields. They have great potential in biomedical engineering, soft matter engineering, and the design of smart materials. Current research focuses on manufacturing methods, characterization techniques, and applications of MERPs in various fields.
APPLIED MATERIALS TODAY
(2022)
Article
Engineering, Manufacturing
Qifeng Qian et al.
Summary: In this study, a 3D reactive inkjet printing method was developed to successfully fabricate bisphenol A-polycarbonate material, demonstrating the capability to broaden the range of AM materials to include engineering grade polymers.
ADDITIVE MANUFACTURING
(2022)
Article
Chemistry, Applied
Hongxia Wang et al.
Summary: This study investigated the effects of nutritional phycocyanin on the properties of high internal phase emulsions (HIPEs). The results showed that the combination of phycocyanin and gelatin improved the stability and extrudability of HIPEs, and enabled high printing definition and shape retention in 3D printing. This research provides important insights for developing customized three-dimensional food with functional thixotropic emulsions.
Article
Mechanics
S. Lucarini et al.
Summary: Magnetorheological elastomers (MREs) are composites with elastomeric matrix filled with magnetic particles, capable of deforming and changing properties under external magnetic field. They have a wide range of applications in soft robotics and bioengineering. However, understanding of the viscoelastic mechanisms in MREs is still limited. This study provides a numerical analysis of magneto-active microstructures considering viscous deformation mechanisms, shedding light on the competition between macrostructural and microstructural responses in MREs.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
(2022)
Article
Mechanics
Marzieh Bahreman et al.
Summary: This paper investigates the stability of microstructured dielectric elastomer plates under electromechanical deformations and analyzes the influence of material composition and phase properties on the stability of the plates.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
(2022)
Article
Multidisciplinary Sciences
Mukrime Birgul Akolpoglu et al.
Summary: Bacterial biohybrids controlled by magnetic fields can efficiently deliver drugs to specific regions in 3D biological matrices, demonstrating potential for minimally invasive medicine.
Article
Chemistry, Physical
Miguel Angel Moreno-Mateos et al.
Summary: This study explores the design and performance of ultra-soft hybrid magnetorheological elastomers (MREs) through experimental and computational methods. Experimental results show that the magnetomechanical performance of hybrid MREs can be optimized by selecting an appropriate mixing ratio between particles. Computational results reveal the magneto-mechanical interactions between soft and hard particles, which are crucial for the effective response of hybrid MREs. The study uncovers new possibilities to push the frontiers of MRE solutions.
NPJ COMPUTATIONAL MATERIALS
(2022)
Review
Chemistry, Physical
Hui Li et al.
Summary: This review highlights the fabrication of triboelectric nanogenerators (TENGs) using ink-based printing methods. Ink-based printing techniques offer advantages such as low cost, high fabrication accuracy, and efficient production compared to traditional methods. The review summarizes different printing methods, ink classifications, and current applications of ink-based printed TENGs, and discusses the existing challenges and prospects for further research.
Article
Automation & Control Systems
Shuai Wu et al.
Summary: This article introduces a new type of magnetically actuated structurally reconfigurable electromagnetic metamaterial, which can achieve rapid, reversible, and programmable shape morphing, with better adaptability and deformability than traditional metamaterials.
ADVANCED INTELLIGENT SYSTEMS
(2022)
Article
Materials Science, Multidisciplinary
Ke Du et al.
Summary: The developed silicone thiourea resins improve the elasticity of 3D-printed silicones by increasing dynamic noncovalent intermolecular interactions between polymer chains through the introduction of thiourea groups. A molecular design strategy was implemented to adjust the ratio of thiourea segments using oligomeric and polymeric PDMS units. The cured silicone elastomer displayed a maximum elongation of up to 1000% under tensile load and excellent cyclic compression durability, allowing for the 3D printing of PDMS-based objects with complex microarchitectures, high resolution, excellent surface finishing, and low cytotoxicity, with potential applications in medical devices, wearable devices, and soft robotics.
ACS APPLIED POLYMER MATERIALS
(2021)
Review
Nanoscience & Nanotechnology
Zhijie Zhu et al.
Summary: The emerging capability to 3D print a diverse palette of functional inks enables the mass democratization of patient-specific wearable devices and smart biomedical implants. In situ printing provides a potential remedy for geometrically and dynamically mismatched interfaces between printed materials and target surfaces. Artificial intelligence plays a crucial role in sensing, adapting, and predicting the state of the printing environment.
NATURE REVIEWS MATERIALS
(2021)
Article
Engineering, Multidisciplinary
M. A. Moreno et al.
Summary: Magnetorheological elastomers (MREs) are promising multifunctional composites with the ability to respond to external magnetic fields, making them ideal for soft robotics and bioengineering applications. However, there is still a lack of understanding in the magneto-mechanical properties of these materials, particularly in relation to rate dependences. Further research is needed to explore the interactions of rate dependences on their magnetorheological behavior.
COMPOSITES PART B-ENGINEERING
(2021)
Article
Materials Science, Multidisciplinary
Anil K. Bastola et al.
Summary: Magnetoactive soft materials (MSMs) are emerging as a promising class of smart materials with applications in artificial muscles, soft robotics, drug delivery, surgery, and metamaterials. They offer advantages such as remote actuation, high strain and strain rate, self-sensing, and fast response, making them ideal for shape morphing, dynamic locomotion, and reconfigurable structures. This review article provides a comprehensive overview of MSMs and discusses future perspectives for developing multifunctional magnetoactive devices.
MATERIALS & DESIGN
(2021)
Article
Polymer Science
Zuhan He et al.
Summary: This study found that high molecular weight SEBS with high styrene content is not suitable for SLS 3D printing, while low molecular weight SEBS can be used. Graphene as an infrared absorber can enhance laser absorption, leading to improved tensile strength and elongation at break in the final product.
JOURNAL OF APPLIED POLYMER SCIENCE
(2021)
Article
Engineering, Manufacturing
Nava Raj Khatri et al.
Summary: 3D printing of fiber-reinforced composites using helicoid channels as a passive approach allows for improved fiber alignment, avoiding clogging and enhancing printability. The helicoid surface to volume ratio and helix angle can be adjusted to tune mechanical properties of printed composites, increasing stiffness and strength by up to 77.6% and 47.8% respectively.
ADDITIVE MANUFACTURING
(2021)
Article
Chemistry, Multidisciplinary
Fazil E. Uslu et al.
Summary: Mechanobiology investigates how forces regulate cell behaviors and the impact of physical properties of fibrous ECM on cells. A robotic manipulation platform allows wireless and programmable deformation of engineered fibrous ECM, providing insights into the effects of forces and deformations on cell behavior and signaling.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Xiao Kuang et al.
Summary: The magnetic dynamic polymer (MDP) composite, consisting of hard-magnetic microparticles in a dynamic polymer network, enables functionalities such as magnetization reprogramming, targeted welding for magnetic-assisted assembly, and permanent structural reconfiguration, providing potential for manufacturing functional soft architected materials.
ADVANCED MATERIALS
(2021)
Article
Multidisciplinary Sciences
Liu Wang et al.
Summary: A new design and optimization method for a novel magnetic soft continuum robot is reported, using nonuniform distribution of magnetic particles to achieve an optimal workspace. This method integrates theoretical models and genetic algorithms, providing a powerful tool for the design of future magnetic soft robots and actuators.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
(2021)
Article
Multidisciplinary Sciences
Hyunwoo Yuk et al.
NATURE COMMUNICATIONS
(2020)
Review
Chemistry, Multidisciplinary
Lisa Jiaying Tan et al.
ADVANCED FUNCTIONAL MATERIALS
(2020)
Article
Polymer Science
Sampada Bodkhe et al.
EUROPEAN POLYMER JOURNAL
(2020)
Article
Materials Science, Multidisciplinary
Chen Zhao et al.
MATERIALS & DESIGN
(2020)
Review
Chemistry, Multidisciplinary
Andrea Schwab et al.
Article
Multidisciplinary Sciences
Thomas J. Wallin et al.
NATURE COMMUNICATIONS
(2020)
Review
Engineering, Multidisciplinary
Anil K. Bastola et al.
COMPOSITES PART B-ENGINEERING
(2020)
Article
Nanoscience & Nanotechnology
Lu-yu Zhou et al.
ACS APPLIED MATERIALS & INTERFACES
(2019)
Article
Engineering, Biomedical
H. Montazerian et al.
ACTA BIOMATERIALIA
(2019)
Article
Chemistry, Multidisciplinary
Kaijuan Chen et al.
ADVANCED FUNCTIONAL MATERIALS
(2019)
Article
Chemistry, Multidisciplinary
Yin Cheng et al.
Article
Multidisciplinary Sciences
Mark A. Skylar-Scott et al.
Article
Materials Science, Biomaterials
Veli Ozbolat et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING
(2018)
Article
Materials Science, Biomaterials
Veli Ozbolat et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING
(2018)
Review
Nanoscience & Nanotechnology
Matteo Cianchetti et al.
NATURE REVIEWS MATERIALS
(2018)
Review
Nanoscience & Nanotechnology
T. J. Wallin et al.
NATURE REVIEWS MATERIALS
(2018)
Article
Multidisciplinary Sciences
Yoonho Kim et al.
Article
Engineering, Electrical & Electronic
A. Nag et al.
SENSORS AND ACTUATORS A-PHYSICAL
(2018)
Article
Engineering, Biomedical
Teng Gao et al.
Article
Chemistry, Multidisciplinary
Hyunwoo Yuk et al.
ADVANCED MATERIALS
(2018)
Article
Materials Science, Multidisciplinary
Craig Sturgess et al.
JOURNAL OF MATERIALS CHEMISTRY C
(2017)
Article
Chemistry, Applied
Florian H. Mostegel et al.
PROGRESS IN ORGANIC COATINGS
(2016)
Article
Materials Science, Biomaterials
Thomas J. Hinton et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING
(2016)
Article
Materials Science, Biomaterials
Thomas J. Hinton et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING
(2016)
Article
Engineering, Biomedical
Jennifer D. Kiang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
(2013)
Article
Multidisciplinary Sciences
Dae-Hyeong Kim et al.
Review
Chemistry, Physical
Jan Mewis et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE
(2009)
Article
Chemistry, Analytical
Nam-Bu Cho et al.
SENSORS AND ACTUATORS B-CHEMICAL
(2008)
