☆ 4.6 Review

Strategies toward High-Loading Lithium-Sulfur Batteries

ACS ENERGY LETTERS (2023)

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Packing Sulfur Species by Phosphorene-Derived Catalytic Interface for Electrolyte-Lean Lithium-Sulfur Batteries

Jiangqi Zhou et al.

Summary: Utilizing a hermetic catalytic interface constructed by phosphorene/graphene heterostructure enables rapid LiPS conversion and slow LiPS migration, effectively promoting sulfur redox reactions in lithium-sulfur batteries under lean electrolyte conditions.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection
Review Chemistry, Multidisciplinary

A Review of Heteroatom Doped Materials for Advanced Lithium-Sulfur Batteries

Jianli Wang et al.

Summary: Lithium sulfur batteries, with high theoretical capacity and energy density, face challenges such as poor conductivity of active sulfur, large volume expansion of cathode, and shuttle effect of lithium polysulfides. Heteroatom doping is proposed to manipulate the electronic structure and improve the performance of sulfur host materials for enhanced cell performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Design of Quasi-MOF Nanospheres as a Dynamic Electrocatalyst toward Accelerated Sulfur Reduction Reaction for High-Performance Lithium-Sulfur Batteries

Dan Luo et al.

Summary: This study presents a strategy to design quasi-MOF nanospheres as sulfur electrocatalysts by incorporating a transition-state structure between MOF and metal oxides via controlled ligand exchange strategy. The quasi-MOF inherits the porous structure of MOF and exposes abundant metal nodes to act as active sites for strong LiPs absorbability, resulting in remarkable catalytic activity and long-term cycling stability in Li-S batteries.

ADVANCED MATERIALS (2022)

Add to Collection
Article Engineering, Environmental

Dual-functional Co5.47N/Fe3N heterostructure interconnected 3D N-doped carbon nanotube-graphene hybrids for accelerating polysulfide conversion in Li-S batteries

Thanh Tuan Nguyen et al.

Summary: A novel in-situ one-step approach was used to prepare a highly catalytic lithium-sulfur battery cathode material, which exhibited exceptional capacity performance at 0.1C rate and long cycle-life for 500 cycles.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Catalytic materials for lithium-sulfur batteries: mechanisms, design strategies and future perspective

Hao Chen et al.

Summary: Lithium-sulfur batteries (LSBs) have attracted attention as post-lithium-ion battery technologies due to their high energy density and low cost. This review investigates the evolution of sulfur species in LSBs and explores the roles of catalytic materials in charge/discharge processes, offering strategies to enhance catalysis efficiency.

MATERIALS TODAY (2022)

Add to Collection
Article Chemistry, Physical

Uniformly Controlled Treble Boundary Using Enriched Adsorption Sites and Accelerated Catalyst Cathode for Robust Lithium-Sulfur Batteries

Rongrong Chu et al.

Summary: This study enhances the adsorption ability and reaction rate of high order lithium polysulfides in lithium-sulfur batteries by designing a heterostructure, leading to excellent rate performance and long-term stability.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

In Situ Grown 1T′-MoTe2 Nanosheets on Carbon Nanotubes as an Efficient Electrocatalyst and Lithium Regulator for Stable Lithium-Sulfur Full Cells

Jiarui He et al.

Summary: This study presents a dual-function, flexible, free-standing framework that tackles the challenges faced by lithium-sulfur batteries by coupling catalytic and lithiophilic MoTe2 nanosheets with conductive carbon nanotubes. The SEI formed by MoTe2-CNT stabilizes Li deposition and extends battery cycle life.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection
Article Nanoscience & Nanotechnology

A Silicon Monoxide Lithium-Ion Battery Anode with Ultrahigh Areal Capacity

Jiang Zhong et al.

Summary: This study reports a graphene/silicon monoxide composite with high mass loading for next-generation lithium-ion batteries. By constructing a graphene framework with super-elasticity and exceptional mechanical robustness, the composite achieves high areal capacity. The achievement of unprecedented areal capacities marks a critical step toward realizing the full potential of high-capacity alloy-type electrode materials in practical lithium-ion batteries.

NANO-MICRO LETTERS (2022)

Add to Collection
Review Multidisciplinary Sciences

The promises, challenges and pathways to room-temperature sodium-sulfur batteries

Lei Wang et al.

Summary: This article discusses the advantages, challenges, and strategies of room-temperature sodium-sulfur batteries (RT-Na-S batteries), reviews recent progress, and provides a forward-looking perspective on achieving high-energy-density and robust batteries.

NATIONAL SCIENCE REVIEW (2022)

Add to Collection
Article Engineering, Environmental

Enhanced chemisorption and catalytic conversion of polysulfides via CoFe@NC nanocubes modified separator for superior Li-S batteries

Yun Wang et al.

Summary: The coordination mechanism of adjusting the chemical adsorption and catalytic conversion of polysulfides is crucial for the development of high energy density lithium-sulfur batteries. In this study, a CoFe@NC nanocubes material was successfully synthesized and used as a bifunctional separator modification for Li-S batteries. The CoFe@NC nanocubes exhibited strong chemisorption and catalytic conversion activity, leading to enhanced redox kinetics and reduced polysulfide shuttle effect. Li-S batteries assembled with CoFe@NC modified separator showed high specific capacity, excellent rate capacity, and superior cycle stability, even at high sulfur loading and low electrolyte conditions.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Engineering, Environmental

High-density catalytic heterostructures strung by buried-in carbon tube network as monolithic holey host for endurable Li-S batteries

Rongrong Li et al.

Summary: This study proposes a unique catalysis-conduction configuration for the sulfur cathode host in Li-S batteries. It utilizes carbon nanotubes (CNTs) with polar NiCoP/CoP heterojunction grains strung on each CNT to achieve a compact and high-density distribution of phosphide heterostructures. This configuration enhances the conversion kinetics of lithium polysulfides and prevents loose and uneven deposition of S-based species.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Engineering, Environmental

Amorphous transformation of FeP enabling enhanced sulfur catalysis and anchoring in High-performance Li-S batteries

Guang Xia et al.

Summary: This study demonstrates the enhanced electrochemical performance of amorphous FeP phase in addressing the critical challenges of polysulfide shuttling and low utilization of sulfur in Li-S batteries. The amorphous aFeP phase effectively overcomes these issues by providing additional and stronger binding sites, enhanced electron exchanging ability, and reduced HOMO-LUMO gap. It offers useful insights for the future development of amorphous catalytic materials in high-performance Li-S cathodes.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Chemistry, Applied

Direct insight into sulfiphilicity-lithiophilicity design of bifunctional heteroatom-doped graphene mediator toward durable Li-S batteries

Haina Ci et al.

Summary: The study developed a temperature-mediated direct chemical vapor deposition strategy to synthesize three-dimensional boron/nitrogen dual-doped graphene particulated architectures for use as a mediator in Li-S batteries. The mediator demonstrated enhanced kinetics of polysulfide transformation and suppression of lithium dendrite growth.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection
Article Electrochemistry

A Separator Modified with Rutile Titania and Three-Dimensional Interconnected Graphene-Like Carbon for Advanced Li-S Batteries

Shuang Xia et al.

Summary: By modifying the separators with spherical rutile TiO2 and three-dimensional interconnected graphene-like carbon, the electrochemical performance of Li-S batteries can be improved by alleviating the 'shuttle effect' and corrosion of lithium anodes.

CHEMELECTROCHEM (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Synergic adsorption and catalytic conversion of polysulfides based on polar Mo2C and pyridinic N for the enhanced electrochemical performance of LieS batteries

Y. Liu et al.

Summary: This study proposed a strategy of using a soft template to prepare Mo2C/nitrogen-doped carbon hollow microflowers, which serve as efficient absorbents and electrocatalysts for polysulfides in LieS batteries. The fabricated HeMo2C/NC MFs exhibit enhanced adsorption and catalytic conversion for polysulfides, leading to high initial discharge capacity and good electrochemical performance. The article provides a novel viewpoint and strategy for the reasonable design of materials for efficient and durable LieS batteries.

MATERIALS TODAY SUSTAINABILITY (2022)

Add to Collection
Article Chemistry, Physical

Cation-doped ZnS catalysts for polysulfide conversion in lithium-sulfur batteries

Zihan Shen et al.

Summary: By studying the relationship between polysulfide adsorption ability and catalytic activity, researchers have discovered a volcano-shaped relationship. The study distinguishes between catalytic and anchoring effects, providing insights into the role of adsorption and catalyst passivation. These findings offer a rational viewpoint for designing and tuning the activity of Li-S catalysts.

NATURE CATALYSIS (2022)

Add to Collection
Article Energy & Fuels

Perspective of polymer-based solid-state Li-S batteries

Julen Castillo et al.

Summary: This perspective article briefly summarizes the recent progress on polymer-based solid-state Li-S batteries, with a special focus on electrolytes, and proposes future work based on the existing development and current challenges.

ENERGY MATERIALS (2022)

Add to Collection
Article Chemistry, Applied

A strategy to achieve high loading and high energy density Li-S batteries

Fei Yin et al.

Summary: A 3D free-standing sulfur cathode scaffold (Ti3C2Tx@S/CC) is designed and fabricated to achieve high loading and high energy density Li-S batteries. The electrode features a flexible carbon cloth substrate and an outer-coated Ti3C2Tx layer, which can accommodate large amounts of sulfur, ensure fast electron transfer, and promote excellent cycling stability and rate performance, as well as high specific energy density.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Rational Design of Multifunctional Integrated Host Configuration with Lithiophilicity-Sulfiphilicity toward High-Performance Li-S Full Batteries

Yunhong Wei et al.

Summary: In this study, a conductive composite architecture consisting of bio-derived N-doped porous carbon fiber bundles with embedded cobalt and niobium carbide nanoparticles was used to address the challenges in Li-S batteries. It was found that the niobium carbide nanoparticles could regulate the lithium and sulfur electrochemistry simultaneously, resulting in excellent rate performance and cycling life of the assembled Li-S batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Facile Synthesis of Heterostructured MoS2-MoO3 Nanosheets with Active Electrocatalytic Sites for High-Performance Lithium-Sulfur Batteries

Da Lei et al.

Summary: A novel MoS2-MoO3/CS composite was designed and synthesized to modify the separator of lithium-sulfur batteries, showing strong surface affinity toward polysulfides and good catalytic activity. The composite exhibited high discharge capacity, good cycling stability, and low discharge capacity decay rate, offering a facile design for high-performance Li-S batteries.

ACS NANO (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Engineering d-p Orbital Hybridization in Single-Atom Metal-Embedded Three-Dimensional Electrodes for Li-S Batteries

Zhiyuan Han et al.

Summary: The study reveals that the d-p orbital hybridization between single-atom metals and sulfur species can serve as a descriptor for understanding the catalytic activity of SACs in Li-S batteries. Transition metals with lower atomic numbers, such as titanium, have been found to effectively bind lithium polysulfides and catalyze their electrochemical reaction. Single-atom metal catalysts embedded in three-dimensional electrodes prepared through a nitrogen coordination approach show high catalytic activity and low catalyst loading for improved sulfur utilization in Li-S batteries.

ADVANCED MATERIALS (2021)

Add to Collection
Article Engineering, Chemical

Enhanced Performance of Lithium-Sulfur Batteries with Co-Doped g-C3N4 Nanosheet-Based Separator

Min Luo et al.

Summary: This study successfully improved the performance of lithium-sulfur batteries by fabricating novel Co-doped g-C3N4 nanosheets, effectively limiting the shuttle of polysulfides and enhancing the adsorption and catalytic conversion of polysulfides.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Isolated Single-Atom Ni-N5 Catalytic Site in Hollow Porous Carbon Capsules for Efficient Lithium-Sulfur Batteries

Shaolong Zhang et al.

Summary: By constructing a multifunctional catalyst of isolated single-atom nickel in hollow nitrogen-doped porous carbon (Ni-N-5/HNPC), the performance of lithium-sulfur batteries has been successfully enhanced, including improved electrical conductivity, enhanced physical-chemical restriction capability towards lithium polysulfides, and boosted redox reaction kinetics.

NANO LETTERS (2021)

Add to Collection
Article Chemistry, Physical

3D Holey Graphene/Polyacrylonitrile Sulfur Composite Architecture for High Loading Lithium Sulfur Batteries

Tao Wang et al.

Summary: The 3DHG/PS composite cathode for lithium sulfur batteries enhances electron and ion transport speed and reduces volume expansion issues, effectively lowering the fading rate. Moreover, the avoidance of soluble lithium polysulfides formation further reduces the shuttling effect, demonstrating high capacity and rate performance.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection
Review Chemistry, Applied

Catalyzing the polysulfide conversion for promoting lithium sulfur battery performances: A review

Jingfa Li et al.

Summary: LSBs are seen as potential successors to LIBs due to higher energy density and cost effectiveness, but face challenges such as insulation and active material loss. Introducing high-conductivity hosts and trace catalysts can improve electrochemical performance.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection
Article Chemistry, Physical

Synergetic effect of spatially separated dual co-catalyst for accelerating multiple conversion reaction in advanced lithium sulfur batteries

Zhenxin Zhao et al.

Summary: The use of Fe3O4/HPC and FeP/HPC as dual-functional structure can enhance the immobilization and catalytic conversion of LiPS, ensuring uniform Li2S deposition and reducing dead sulfur in lithium-sulfur batteries.

NANO ENERGY (2021)

Add to Collection
Article Chemistry, Physical

A mechanically robust self-healing binder for silicon anode in lithium ion batteries

Hao Chen et al.

Summary: Silicon is considered the most promising anode material for next-generation lithium ion batteries, but silicon particles undergo volume changes and pulverization during charge/discharge processes, damaging the longevity of silicon anodes. This study synthesized a novel self-healing binder to repair the damage to silicon anodes, achieving excellent electrochemical performance.

NANO ENERGY (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Hierarchical Micro-Nanoclusters of Bimetallic Layered Hydroxide Polyhedrons as Advanced Sulfur Reservoir for High-Performance Lithium-Sulfur Batteries

Weilong Qiu et al.

Summary: In this study, a unique bimetallic NiCo-layered double hydroxide was developed as an advanced sulfur reservoir for lithium-sulfur batteries, replacing the traditional monometallic Co-LDH. The bimetallic configuration improved the electrode structure and chemical interactions, leading to enhanced cycling performance and rate capability of Li-S cells.

ADVANCED SCIENCE (2021)

Add to Collection
Article Chemistry, Physical

Natural Lepidolite Enables Fast Polysulfide Redox for High-Rate Lithium Sulfur Batteries

Guangfeng Zeng et al.

Summary: A lepidolite-modified separator is designed to improve the performance of lithium sulfur batteries by suppressing polysulfide shuttling and accelerating polysulfide transformation, significantly enhancing the fast discharge capabilities of the batteries.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Crystal Facet Engineering Induced Active Tin Dioxide Nanocatalysts for Highly Stable Lithium-Sulfur Batteries

Bo Jiang et al.

Summary: Controlling exposed crystal facets through crystal facet engineering is effective in enhancing the catalytic activity of nanocrystalline catalysts. The synthesis of active SnO2 nano-octahedra enclosed by {332} crystal facets demonstrates powerful chemisorption and catalytic ability, improving the redox kinetics of sulfur species in lithium-sulfur chemistry. Crystal facet engineering is a promising strategy for optimizing catalyst performance and aiding in the rational design of advanced sulfur electrodes.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Hypercrosslinked Polymerization Enabled N-Doped Carbon Confined Fe2O3 Facilitating Li Polysulfides Interface Conversion for Li-S Batteries

Yun Lu et al.

Summary: This study successfully improved the performance of lithium-sulfur batteries by confining Fe2O3 nanocrystals in N-doped carbon material, creating dual active sites and enhancing the chemisorption and interface conversion ability of Li polysulfides, leading to high mass capacity and excellent cycling stability.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Embedding Fe3C and Fe3N on a Nitrogen-Doped Carbon Nanotube as a Catalytic and Anchoring Center for a High-Areal-Capacity Li-S Battery

Tuyuan Zhu et al.

Summary: The study introduces Fe3C/Fe3N@nitrogen-doped carbon nanotubes as multifunctional sulfur hosts to address the challenges in lithium-sulfur batteries, such as sluggish redox kinetics of polysulfides and serious shuttle effect. The multifunctional hosts demonstrate high areal capacity and steady cycle ability, highlighting their potential for high sulfur mass loading applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Chemistry, Multidisciplinary

High-Energy-Density, Long-Life Lithium-Sulfur Batteries with Practically Necessary Parameters Enabled by Low-Cost Fe-Ni Nanoalloy Catalysts

Jiarui He et al.

Summary: A cost-effective hexagonal close-packed Fe-Ni alloy is shown to be an efficient electrocatalyst for promoting LiPS conversion in Li-S batteries, resulting in long lifespan and high areal capacity. The electrocatalysis mechanisms of Fe-Ni toward LiPS conversion are thoroughly revealed, showing potential for designing highly efficient, cost-effective electrocatalysts for high-performance Li-S batteries.

ACS NANO (2021)

Add to Collection
Article Chemistry, Multidisciplinary

A Robust Ternary Heterostructured Electrocatalyst with Conformal Graphene Chainmail for Expediting Bi-Directional Sulfur Redox in Li-S Batteries

Jingsheng Cai et al.

Summary: The ternary graphene-TiO2/TiN heterostructure is an efficient and robust electrocatalyst for accelerating sulfur redox kinetics, providing abundant anchoring points and sustained active sites for smooth bi-directional electrocatalysis.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

NiMoO4 Nanosheets Anchored on N-S Doped Carbon Clothes with Hierarchical Structure as a Bidirectional Catalyst toward Accelerating Polysulfides Conversion for Li-S Battery

Tingting Sun et al.

Summary: A 3D hierarchical structure composed of NiMoO4@NSCC self-supporting cathode is successfully designed and constructed to address the shuttle effect and reduction/oxidation reactions in Li-S batteries, demonstrating impressive long cycle stability.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Interfacial Engineering of Bifunctional Niobium (V)-Based Heterostructure Nanosheet Toward High Efficiency Lean-Electrolyte Lithium-Sulfur Full Batteries

Haodong Shi et al.

Summary: A novel twinborn holey Nb4N5-Nb2O5 heterostructure is designed as a dual-functional host for high-efficiency Li-S batteries, accelerating the redox reactions at the sulfur cathode and inhibiting dendrite growth at the lithium anode.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

The Electrostatic Attraction and Catalytic Effect Enabled by Ionic-Covalent Organic Nanosheets on MXene for Separator Modification of Lithium-Sulfur Batteries

Pengyue Li et al.

Summary: This study proposes a new strategy to regulate the redox kinetics and shuttle effect of polysulfides by modifying a polypropylene separator with a coating layer of guanidinium-based ionic-covalent organic nanosheets (iCON) on the surface of Ti3C2. The synergistic effects of Ti3C2 and iCON effectively suppress the shuttle effect of polysulfides and accelerate the redox reactions of sulfur species, resulting in high-performance lithium-sulfur batteries.

ADVANCED MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Multifunctional cation-vacancy-rich ZnCo2O4 polysulfide-blocking layer for ultrahigh-loading Li-S battery

Zhenwei Li et al.

Summary: The authors designed and synthesized Zn defective Zn/Co oxide nanosheets to construct a multifunctional polysulfide-blocking layer to overcome the hurdles in commercializing Li-S batteries. The composite separator with high capacity and high sulfur loading shows promise for constructing high-performance Li-S batteries.

NANO ENERGY (2021)

Add to Collection
Article Chemistry, Physical

Interfaces-dominated Li2S nucleation behavior enabled by heterostructure catalyst for fast kinetics Li-S batteries

Da-Qian Cai et al.

Summary: In this study, MoO2/alpha-MoC nanocomposite was used as a multifunctional electrocatalyst to address the issues of soluble intermediate lithium polysulfides (LiPSs) shuttling and uncontrollable deposition of Li2S in lithium-sulfur batteries (LSBs). The use of MoO2/alpha-MoC interlayer enabled the LSBs to exhibit excellent rate performance, promising cycling stability, and a high specific capacity.

NANO ENERGY (2021)

Add to Collection
Article Chemistry, Physical

Ni2P electrocatalysts decorated hollow carbon spheres as bi-functional mediator against shuttle effect and Li dendrite for Li-S batteries

Shan Yang et al.

Summary: Lithium-sulfur batteries show promise as next-generation energy storage devices, but face challenges such as shuttle effect and Li dendrite growth. This study demonstrates the use of Ni2P-HCS as an efficient mediator for Li-S batteries, achieving excellent rate capability and long-term cycling stability. The loading coefficient and catalytic effectiveness value are proposed to evaluate the catalytic efficiency of electrocatalysts.

NANO ENERGY (2021)

Add to Collection
Article Chemistry, Physical

Multifunction Co-Nx species to manipulate polysulfides conversion kinetics toward highly efficient lithium-sulfur batteries

Donghua Wang et al.

Summary: A new type of three-dimensional freestanding framework sulfur cathode has been synthesized and investigated for lithium-sulfur batteries, which can efficiently solve the problems of low sulfur loading, shuttling, and sluggish conversion. The material exhibits high capacity and excellent cycling performance, even under high sulfur loading and lean electrolyte conditions, achieving high areal capacity.

NANO ENERGY (2021)

Add to Collection
Article Engineering, Environmental

Rational cooperativity of nanospace confinement and rapid catalysis via hollow carbon nanospheres@Nb-based inorganics for high-rate Li-S batteries

Qinqin Huang et al.

Summary: This study introduces Nb2O5 and NbC into hollow carbon nanospheres to enhance the catalytic performance in Li-S batteries. The optimized HCN@NbC/S cathode exhibits outstanding reversible capacity and cycling performance with high rate capability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Chemistry, Physical

Concurrent realization of dendrite-free anode and high-loading cathode via 3D printed N-Ti3C2 MXene framework toward advanced Li-S full batteries

Chaohui Wei et al.

Summary: A multifunctional 3D printed framework comprising nitrogen-doped porous Ti3C2MXene is proposed to regulate both electrodes of Li-S batteries. The framework possesses high conductivity and ample nitrogen sites for synergizing lithiophilic-sulfiphilic feature.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Multidisciplinary Sciences

High-order superlattices by rolling up van der Waals heterostructures

Bei Zhao et al.

Summary: This study presents a straightforward approach to producing high-order van der Waals superlattices by rolling up van der Waals heterostructures, demonstrating the modulation of electronic band structure and dimensionality. It provides a rich material platform for both fundamental studies and technological applications, showcasing the potential for creating diverse mixed-dimensional van der Waals superlattices.

NATURE (2021)

Add to Collection
Article Chemistry, Physical

Cooperative catalytic interface accelerates redox kinetics of sulfur species for high-performance Li-S batteries

Xu Zhou et al.

Summary: By designing a cooperative catalytic interface with fine molecular regulation mechanism, the reaction kinetics in Li-S batteries are greatly accelerated, leading to outstanding electrochemical performance and low capacity decay rate even at high sulfur loading levels. This work also provides insights into the catalytic mechanism through DFT theory and in(ex)-situ technologies.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Monodisperse Molybdenum Nanoparticles as Highly Efficient Electrocatalysts for Li-S Batteries

Yuping Liu et al.

Summary: A highly efficient electrocatalyst, consisting of monodisperse molybdenum nanoparticles embedded onto nitrogen-doped graphene, was developed to enhance lithium polysulfide conversion in lithium-sulfur batteries. The electrocatalyst facilitates fast conversion of LiPSs by attracting electrons of LiPS anions. Batteries based on this new cathode showed excellent performance and stability, suggesting the great potential of molybdenum nanoparticles in high-performance Li-S batteries.

ACS NANO (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Selective Catalysis Remedies Polysulfide Shuttling in Lithium-Sulfur Batteries

Wuxing Hua et al.

Summary: Selective catalysis is proposed as a fundamental remedy for the shuttle effect of soluble lithium polysulfides in Li-S batteries, benefiting from its ability to decelerate the accumulation of polysulfides and enhance battery performance, as experimentally and theoretically demonstrated in this study.

ADVANCED MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Manipulating Electrocatalytic Li2S Redox via Selective Dual-Defect Engineering for Li-S Batteries

Zixiong Shi et al.

Summary: The study demonstrates the successful manipulation of bidirectional Li2S redox through selective dual-defect engineering of a MoSe2 electrocatalyst. The electrokinetic analysis reveals the selective electrocatalytic effect of the two types of defects, leading to a deeper understanding of bidirectional sulfur electrochemistry. This selective electrocatalysis approach shows promise for practical applications in working Li-S systems.

ADVANCED MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Engineering Oversaturated Fe-N5 Multifunctional Catalytic Sites for Durable Lithium-Sulfur Batteries

Yongguang Zhang et al.

Summary: In this study, a novel single atom catalyst and unique carbon support were synthesized to improve the performance of lithium-sulfur batteries, mitigate the shuttle effect of polysulfides, and enhance the kinetics of redox reactions, resulting in outstanding battery performance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection
Article Engineering, Environmental

Fe3C/Fe nanoparticles embedded in N-doped porous carbon nanosheets and graphene: A thin functional interlayer for PP separator to boost performance of Li-S batteries

Shanxing Wang et al.

Summary: The novel Fe3C/Fe@NC/G nanocomposite effectively addresses the sluggish conversion and shuttle effect of soluble polysulfides in lithium-sulfur cells, leading to improved performance. A modified Li-S cell using this functional separator demonstrates high discharge capacity and good cycling stability, especially under high sulfur loading.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Engineering, Environmental

The Electrocatalyst based on LiVPO4F/CNT to enhance the electrochemical kinetics for high performance Li-S batteries

Yinze Zuo et al.

Summary: The study presents a novel functional separator for lithium-sulfur batteries, utilizing LiVPO4F and carbon nanotube as functional coating. The modified separator demonstrates excellent electrochemical performance in LSBs, offering promising results for the development of advanced lithium-sulfur batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Manipulating Redox Kinetics of Sulfur Species Using Mott-Schottky Electrocatalysts for Advanced Lithium-Sulfur Batteries

Yuanjian Li et al.

Summary: The study presents a Co@NC heterostructure as a Mott-Schottky catalyst to enhance sulfur electrochemistry in lithium-sulfur batteries, improving energy efficiency and performance under high-sulfur-loading and lean-electrolyte conditions.

NANO LETTERS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Electrocatalytic NiCo2O4 Nanofiber Arrays on Carbon Cloth for Flexible and High-Loading Lithium-Sulfur Batteries

Shaojie Chen et al.

Summary: Lithium-sulfur batteries have high theoretical energy densities, but face challenges in large-scale commercialization due to the sulfur polysulfide shuttle effect and low sulfur loading. This study demonstrates a flexible lithium-sulfur battery with high sulfur loading using NiCo2O4 nanofiber array grown carbon cloth, achieving good cycle stability.

NANO LETTERS (2021)

Add to Collection
Article Chemistry, Physical

NbSe2 Meets C2N: A 2D-2D Heterostructure Catalysts as Multifunctional Polysulfide Mediator in Ultra-Long-Life Lithium-Sulfur Batteries

Dawei Yang et al.

Summary: An in situ grown C2N@NbSe2 heterostructure was presented as a promising Li-S catalyst and LiPS absorber, effectively overcoming the shuttle effect and sluggish conversion kinetics of lithium polysulfides. The heterostructured cathodes exhibited high initial capacity, impressive cycling stability, and high areal capacity, demonstrating the potential of C2N@NbSe2 heterostructures as multifunctional polysulfide mediators.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Lightweight Free-Standing 3D Nitrogen-Doped Graphene/TiN Aerogels with Ultrahigh Sulfur Loading for High Energy Density Li-S Batteries

Qi Cheng et al.

Summary: This study designed and prepared lightweight electrodes without binders and metal current collectors to assemble high energy density Li-S batteries, achieving high sulfur loading and content, thereby improving the cycling and rate performance of the batteries.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Propelling polysulfide redox conversion by d-band modulation for high sulfur loading and low temperature lithium-sulfur batteries

Pan Zeng et al.

Summary: Alloying metallic Ni with Fe can regulate the adsorbability of sulfur species, improving the rate performance and cycling stability of Li-S batteries, while also exhibiting good performance under high sulfur loading and low-temperature conditions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection
Article Chemistry, Physical

Sulfur vacancies in Co9S8-x/N-doped graphene enhancing the electrochemical kinetics for high-performance lithium-sulfur batteries

Hao-Jie Li et al.

Summary: This study demonstrates that enhancing the adsorption ability for polysulfide anions by introducing sulfur vacancies in a high-sulfur-loading cathode can improve the kinetics of the polysulfide conversion process, leading to high-performance lithium-sulfur batteries. The sulfur vacancies in Co9S8-x/N-G effectively improve the electrode process kinetics for the catalytic conversion of polysulfides, resulting in a high areal capacity and long-term cycling stability. These results suggest that utilizing sulfur vacancies could be an effective approach for achieving high-energy lithium-sulfur batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection
Review Materials Science, Multidisciplinary

Van der Waals Heterostructures by Design: From 1D and 2D to 3D

Peiqi Wang et al.

Summary: Heterostructures are formed by combining two types of materials with different properties, providing the material foundation for modern electronic and optoelectronic devices. The use of van der Waals force allows for a bond-free strategy in creating heterostructures with designable electronic interfaces.

MATTER (2021)

Add to Collection
Article Chemistry, Physical

Boosting the rate performance of Li-S batteries under high mass-loading of sulfur based on a hierarchical NCNT@Co-CoP nanowire integrated electrode†

Jianbo Li et al.

Summary: By using hierarchical NCNT@Co-CoP nanowires as integrated electrodes, high-rate performance Li-S batteries with high sulfur mass-loading have been achieved, showing great potential for practical application in high-rate performance Li-S batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection
Article Chemistry, Physical

Blocking polysulfides with a Janus Fe3C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium-sulfur batteries

Jiayi Li et al.

Summary: Lithium-sulfur batteries show potential for high-density energy storage, but face challenges due to shuttle effect and sluggish reaction kinetics. A Janus Fe3C/N-CNF@RGO electrode was developed to address these issues by providing chemisorption, catalysis, and physical barrier effects. The 3D conductive network enables fast electron transfer, leading to improved long-term stability and rate capabilities.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection
Review Chemistry, Multidisciplinary

When Nanozymes Meet Single-Atom Catalysis

Lei Jiao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Efficient Ni2Co4P3 Nanowires Catalysts Enhance Ultrahigh-Loading Lithium-Sulfur Conversion in a Microreactor-Like Battery

Zihan Shen et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection
Review Chemistry, Physical

Adsorption-Catalysis Design in the Lithium-Sulfur Battery

Miao Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Three-Dimensional Porous Nitrogen-Doped Carbon Nanosheet with Embedded NixCo3-xS4 Nanocrystals for Advanced Lithium-Sulfur Batteries

Xiaobin Liao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Defect-Rich Multishelled Fe-Doped Co3O4 Hollow Microspheres with Multiple Spatial Confinements to Facilitate Catalytic Conversion of Polysulfides for High-Performance Li-S Batteries

Wenjuan Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Built-In Catalysis in Confined Nanoreactors for High-Loading Li-S Batteries

Qingping Wu et al.

ACS NANO (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Single-Atom Catalysts in Catalytic Biomedicine

Huijing Xiang et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Engineering, Environmental

3D catalytic MOF-based nanocomposite as separator coatings for high-performance Li-S battery

Chun-Lei Song et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Article Engineering, Environmental

Enabling rapid polysulfide conversion kinetics by using functionalized carbon nanosheets as metal-free electrocatalysts in durable lithium-sulfur batteries

Songju Ruan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Article Chemistry, Physical

Ultrafine Co3Se4 Nanoparticles in Nitrogen-Doped 3D Carbon Matrix for High-Stable and Long-Cycle-Life Lithium Sulfur Batteries

Dong Cai et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

1T′-ReS2 Nanosheets In Situ Grown on Carbon Nanotubes as a Highly Efficient Polysulfide Electrocatalyst for Stable Li-S Batteries

Jiarui He et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Stable Seamless Interfaces and Rapid Ionic Conductivity of Ca-CeO2/LiTFSI/PEO Composite Electrolyte for High-Rate and High-Voltage All-Solid-State Battery

Hao Chen et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

In-Situ Assembled VS4 as a Polysulfide Mediator for High-Loading Lithium-Sulfur Batteries

Liu Luo et al.

ACS ENERGY LETTERS (2020)

Add to Collection
Review Chemistry, Physical

Single-atom catalysis enables long-life, high-energy lithium-sulfur batteries

Zechao Zhuang et al.

NANO RESEARCH (2020)

Add to Collection
Article Multidisciplinary Sciences

General synthesis of two-dimensional van der Waals heterostructure arrays

Jia Li et al.

NATURE (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Dual-Functional Multichannel Carbon Framework Embedded with CoS2 Nanoparticles: Promoting the Phase Transformation for High-Loading Li-S Batteries

Yuelei Pan et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Core-Shell-Structured Sulfur Cathode: Ultrathin δ-MnO2 Nanosheets as the Catalytic Conversion Shell for Lithium Polysulfides in High Sulfur Content Lithium-Sulfur Batteries

Qing Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Bidirectional Catalysts for Liquid-Solid Redox Conversion in Lithium-Sulfur Batteries

Ruochen Wang et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Three-dimensionally ordered macro-microporous metal organic frameworks with strong sulfur immobilization and catalyzation for high-performance lithium-sulfur batteries

Guoliang Cui et al.

NANO ENERGY (2020)

Add to Collection
Article Chemistry, Physical

Propelling polysulfide conversion for high-loading lithium-sulfur batteries through highly sulfiphilic NiCo2S4 nanotubes

Sha Li et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

Dual-Functional Atomic Zinc Decorated Hollow Carbon Nanoreactors for Kinetically Accelerated Polysulfides Conversion and Dendrite Free Lithium Sulfur Batteries

Haodong Shi et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

A fundamental look at electrocatalytic sulfur reduction reaction

Lele Peng et al.

NATURE CATALYSIS (2020)

Add to Collection
Article Chemistry, Physical

Multifunctional LDH/Co9S8 heterostructure nanocages as high-performance lithium-sulfur battery cathodes with ultralong lifespan

Shixia Chen et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Tuning the Band Structure of MoS2 via Co9S8@MoS2 Core-Shell Structure to Boost Catalytic Activity for Lithium-Sulfur Batteries

Boyu Li et al.

ACS NANO (2020)

Add to Collection
Article Chemistry, Physical

Ti3C2 MXene as an energy band bridge to regulate the heterointerface mass transfer and electron reversible exchange process for Li-S batteries

Ruohan Hou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Single-Atom Catalysts Based on the Metal-Oxide Interaction

Rui Lang et al.

CHEMICAL REVIEWS (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Theoretical insights into single-atom catalysts

Lulu Li et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

3D Printing of a V8C7-VO2 Bifunctional Scaffold as an Effective Polysulfide Immobilizer and Lithium Stabilizer for Li-S Batteries

Jingsheng Cai et al.

ADVANCED MATERIALS (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Emerging 2D MXenes for supercapacitors: status, challenges and prospects

Minmin Hu et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection
Article Chemistry, Physical

A Freestanding Flexible Single-Atom Cobalt-Based Multifunctional Interlayer toward Reversible and Durable Lithium-Sulfur Batteries

Yiju Li et al.

SMALL METHODS (2020)

Add to Collection
Article Electrochemistry

Co-Ni Binary-Metal Oxide Coated with Porous Carbon Derived from Metal-Organic Framework as Host of Nano-Sulfur for Lithium-Sulfur Batteries

Xuan Zhang et al.

BATTERIES & SUPERCAPS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Covalent sulfur embedding in inherent N,P co-doped biological carbon for ultrastable and high rate lithium-sulfur batteries

Jiarui Li et al.

NANOSCALE (2020)

Add to Collection
Article Chemistry, Physical

Controllable electrolytic formation of Ti2O as an efficient sulfur host in lithium-sulfur (Li-S) batteries

Ruxing Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection
Article Chemistry, Physical

MOF-derived hierarchical CoP nanoflakes anchored on vertically erected graphene scaffolds as self-supported and flexible hosts for lithium-sulfur batteries

Jia Jin et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection
Article Chemistry, Physical

Ni3S2 anchored to N/S co-doped reduced graphene oxide with highly pleated structure as a sulfur host for lithium-sulfur batteries

Daying Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection
Article Chemistry, Physical

Electrospun carbon nanofibers with MnS sulfiphilic sites as efficient polysulfide barriers for high-performance wide-temperature-range Li-S batteries

Xin Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection
Review Chemistry, Physical

Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries

Linlin Zhang et al.

CARBON (2019)

Add to Collection
Article Chemistry, Physical

Highly sulfiphilic Ni-Fe bimetallic oxide nanoparticles anchored on carbon nanotubes enable effective immobilization and conversion of polysulfides for stable lithium-sulfur batteries

Ze Zhang et al.

CARBON (2019)

Add to Collection
Article Chemistry, Physical

Efficient Trapping and Catalytic Conversion of Polysulfides by VS4 Nanosites for Li-S Batteries

Sizhe Wang et al.

ACS ENERGY LETTERS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Promoting the Transformation of Li2S2 to Li2S: Significantly Increasing Utilization of Active Materials for High-Sulfur-Loading Li-S Batteries

Xiaofei Yang et al.

ADVANCED MATERIALS (2019)

Add to Collection
Review Chemistry, Multidisciplinary

A Comprehensive Review of Materials with Catalytic Effects in Li-S Batteries: Enhanced Redox Kinetics

Won-Gwang Lim et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection
Article Chemistry, Physical

Metal Sulfide-Decorated Carbon Sponge as a Highly Efficient Electrocatalyst and Absorbant for Polysulfide in High-Loading Li2S Batteries

Jiarui He et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Battery Separators Functionalized with Edge-Rich MoS2/C Hollow Microspheres for the Uniform Deposition of Li2S in High-Performance Lithium-Sulfur Batteries

Nan Zheng et al.

NANO-MICRO LETTERS (2019)

Add to Collection
Article Chemistry, Physical

Constructing metal-free and cost-effective multifunctional separator for high-performance lithium-sulfur batteries

Zhao Wang et al.

NANO ENERGY (2019)

Add to Collection
Review Chemistry, Multidisciplinary

A Comprehensive Understanding of Lithium-Sulfur Battery Technology

Tao Li et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Combined High Catalytic Activity and Efficient Polar Tubular Nanostructure in Urchin-Like Metallic NiCo2Se4 for High-Performance Lithium-Sulfur Batteries

Chaoqi Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Bacteria-Derived Biological Carbon Building Robust Li-S Batteries

Tao Wang et al.

NANO LETTERS (2019)

Add to Collection
Article Chemistry, Physical

Sandwich-Like Ultrathin TiS2 Nanosheets Confined within N, S Codoped Porous Carbon as an Effective Polysulfide Promoter in Lithium-Sulfur Batteries

Xia Huang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Separator Modified by Cobalt-Embedded Carbon Nanosheets Enabling Chemisorption and Catalytic Effects of Polysulfides for High-Energy-Density Lithium-Sulfur Batteries

Zhibin Cheng et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Adenine Derivative Host with Interlaced 2D Structure and Dual Lithiophilic-Sulfiphilic Sites to Enable High-Loading Li-S Batteries

Qingping Wu et al.

ACS NANO (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Conductive Holey MoO2-Mo3N2 Heterojunctions as Job-Synergistic Cathode Host with Low Surface Area for High-Loading Li-S Batteries

Rongrong Li et al.

ACS NANO (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Compactly Coupled Nitrogen-Doped Carbon Nanosheets/Molybdenum Phosphide Nanocrystal Hollow Nanospheres as Polysulfide Reservoirs for High-Performance Lithium-Sulfur Chemistry

Zhonghui Sun et al.

SMALL (2019)

Add to Collection
Article Chemistry, Physical

Flexible and High-Loading Lithium-Sulfur Batteries Enabled by Integrated Three-In-One Fibrous Membranes

Jianan Wang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection
Article Nanoscience & Nanotechnology

VO2(p)-V2C(MXene) Grid Structure as a Lithium Polysulfide Catalytic Host for High-Performance Li-S Battery

Zhenguo Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Physical

Superior cycling life of Li-S batteries with high sulfur loading enabled by a bifunctional layered-MoO3 cathode

Ruihan Zhang et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection
Article Chemistry, Physical

MoN Supported on Graphene as a Bifunctional Interlayer for Advanced Li-S Batteries

Da Tian et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Cobalt-Doped SnS2 with Dual Active Centers of Synergistic Absorption-Catalysis Effect for High-S Loading Li-S Batteries

Xuejie Gao et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Synergistic Regulation of Polysulfides Conversion and Deposition by MOF-Derived Hierarchically Ordered Carbonaceous Composite for High-Energy Lithium-Sulfur Batteries

Daliang Fang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection
Review Chemistry, Physical

Interlayer Material Selection for Lithium-Sulfur Batteries

Linlin Fan et al.

JOULE (2019)

Add to Collection
Article Chemistry, Physical

Accelerating polysulfide redox conversion on bifunctional electrocatalytic electrode for stable Li-S batteries

Mingliang Yu et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection
Review Chemistry, Physical

A review on the status and challenges of electrocatalysts in lithium-sulfur batteries

Jiarui He et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Metallic NiSe2 nanoarrays towards ultralong life and fast Li2S oxidation kinetics of Li-S batteries

Maoxu Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection
Article Chemistry, Physical

Accelerated Li-S chemistry at a cooperative interface built in situ

Yingze Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection
Article Chemistry, Physical

Promoting polysulfide conversion by catalytic ternary Fe3O4/carbon/graphene composites with ordered microchannels for ultrahigh-rate lithium-sulfur batteries

Meng Ding et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Catalytic Effects in Lithium-Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect

Donghai Liu et al.

ADVANCED SCIENCE (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Vanadium Dioxide-Graphene Composite with Ultrafast Anchoring Behavior of Polysulfides for Lithium-Sulfur Batteries

Yingze Song et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Graphene Oxide-Template Controlled Cuboid-Shaped High-Capacity VS4 Nanoparticles as Anode for Sodium-Ion Batteries

Sizhe Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Heterogeneous/Homogeneous Mediators for High-Energy-Density Lithium-Sulfur Batteries: Progress and Prospects

Ze-Wen Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Synchronous immobilization and conversion of polysulfides on a VO2-VN binary host targeting high sulfur load Li-S batteries

Yingze Song et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection
Article Chemistry, Multidisciplinary

A highly efficient double-hierarchical sulfur host for advanced lithium-sulfur batteries

Linyu Hu et al.

CHEMICAL SCIENCE (2018)

Add to Collection
Article Chemistry, Physical

Rational Design of a Dual-Function Hybrid Cathode Substrate for Lithium-Sulfur Batteries

Liu Luo et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

In Situ Assembly of 2D Conductive Vanadium Disulfide with Graphene as a High-Sulfur-Loading Host for Lithium-Sulfur Batteries

Xingyu Zhu et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection
Article Chemistry, Physical

Porphyrin-Derived Graphene-Based Nanosheets Enabling Strong Polysulfide Chemisorption and Rapid Kinetics in Lithium-Sulfur Batteries

Long Kong et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection
Review Chemistry, Multidisciplinary

Heterogeneous single-atom catalysis

Aiqin Wang et al.

NATURE REVIEWS CHEMISTRY (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Long-Life Lithium-Sulfur Batteries with a Bifunctional Cathode Substrate Configured with Boron Carbide Nanowires

Liu Luo et al.

ADVANCED MATERIALS (2018)

Add to Collection
Review Chemistry, Multidisciplinary

Exploring Chemical, Mechanical, and Electrical Functionalities of Binders for Advanced Energy-Storage Devices

Hao Chen et al.

CHEMICAL REVIEWS (2018)

Add to Collection
Article Chemistry, Physical

Ultra-stable sodium ion battery cathode realized by Cu7S4 nanoparticles

Tao Wang et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection
Article Chemistry, Physical

Facile preparation of ultrafine Ti4O7 nanoparticle-embedded porous carbon for high areal capacity lithium-sulfur batteries

Ao Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection
Article Chemistry, Physical

In-situ PECVD-enabled graphene-V2O3 hybrid host for lithium-sulfur batteries

Yingze Song et al.

NANO ENERGY (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Double-Shelled Phosphorus and Nitrogen Codoped Carbon Nanospheres as Efficient Polysulfide Mediator for High-Performance Lithium-Sulfur Batteries

Jin Wang et al.

ADVANCED SCIENCE (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Biomimetic Root-like TiN/C@S Nanofiber as a Freestanding Cathode with High Sulfur Loading for Lithium-Sulfur Batteries

Yaqi Liao et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection
Article Chemistry, Multidisciplinary

2D MoN-VN Heterostructure To Regulate Polysulfides for Highly Efficient Lithium-Sulfur Batteries

Chao Ye et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection
Review Chemistry, Multidisciplinary

Before Li Ion Batteries

Martin Winter et al.

CHEMICAL REVIEWS (2018)

Add to Collection
Review Chemistry, Physical

Advanced chemical strategies for lithium-sulfur batteries: A review

Xiaojing Fan et al.

GREEN ENERGY & ENVIRONMENT (2018)

Add to Collection
Article Chemistry, Physical

Multi- Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium-Sulfur Batteries

Tianyu Lei et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection
Article Chemistry, Multidisciplinary

A new approach for recycling waste rubber products in Li-S batteries

Byeong-Chul Yu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Twinborn TiO2-TiN heterostructures enabling smooth trapping-diffusion-conversion of polysulfides towards ultralong life lithium-sulfur batteries

Tianhong Zhou et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection
Article Energy & Fuels

Burning lithium in CS2 for high-performing compact Li2S-graphene nanocapsules for Li-S batteries

Guoqiang Tan et al.

NATURE ENERGY (2017)

Add to Collection
Review Nanoscience & Nanotechnology

2D metal carbides and nitrides (MXenes) for energy storage

Babak Anasori et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection
Review Chemistry, Multidisciplinary

More Reliable Lithium-Sulfur Batteries: Status, Solutions and Prospects

Ruopian Fang et al.

ADVANCED MATERIALS (2017)

Add to Collection
Review Chemistry, Multidisciplinary

A review of flexible lithium-sulfur and analogous alkali metal-chalcogen rechargeable batteries

Hong-Jie Peng et al.

CHEMICAL SOCIETY REVIEWS (2017)

Add to Collection
Review Chemistry, Multidisciplinary

Nanostructured Metal Oxides and Sulfides for Lithium-Sulfur Batteries

Xue Liu et al.

ADVANCED MATERIALS (2017)

Add to Collection
Review Chemistry, Multidisciplinary

Designing high-energy lithium-sulfur batteries

Zhi Wei Seh et al.

CHEMICAL SOCIETY REVIEWS (2016)

Add to Collection
Review Chemistry, Multidisciplinary

Rational designs and engineering of hollow micro-/nanostructures as sulfur hosts for advanced lithium-sulfur batteries

Zhen Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection
Article Multidisciplinary Sciences

Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium-sulfur battery design

Xinyong Tao et al.

NATURE COMMUNICATIONS (2016)

Add to Collection
Article Multidisciplinary Sciences

A hyperaccumulation pathway to three-dimensional hierarchical porous nanocomposites for highly robust high-power electrodes

Jian Zhu et al.

NATURE COMMUNICATIONS (2016)

Add to Collection
Article Multidisciplinary Sciences

Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium-sulfur batteries

Guoxing Li et al.

NATURE COMMUNICATIONS (2016)

Add to Collection
Review Nanoscience & Nanotechnology

Van der Waals heterostructures and devices

Yuan Liu et al.

NATURE REVIEWS MATERIALS (2016)

Add to Collection
Review Chemistry, Multidisciplinary

Lithium sulfur batteries, a mechanistic review

M. Wild et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium-Sulfur Batteries

Qianfan Zhang et al.

NANO LETTERS (2015)

Add to Collection
Article Chemistry, Physical

Progress Towards Commercially Viable Li-S Battery Cells

Sigita Urbonaite et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection
Article Nanoscience & Nanotechnology

Insight into the Effect of Boron Doping on Sulfur/Carbon Cathode in Lithium-Sulfur Batteries

Chun-Peng Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection
Review Chemistry, Multidisciplinary

Single-Atom Catalysts: A New Frontier in Heterogeneous Catalysis

Xiao-Feng Yang et al.

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Synthesis and Characterization of Patronite Form of Vanadium Sulfide on Graphitic Layer

Chandra Sekhar Rout et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Cathode Composites for Li-S Batteries via the Use of Oxygenated Porous Architectures

Rezan Demir-Cakan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells

Liwen Ji et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Add to Collection
Article Chemistry, Physical

A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries

Xiulei Ji et al.

NATURE MATERIALS (2009)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.