☆ 4.6 Article

Non-Metallic Alloying Constituents to Develop a Wear-Resistant CrFeNi-BSiC High-Entropy Alloy for Surface Protective Coatings by Thermal Spraying and High-Speed Laser Metal Deposition

COATINGS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Coatings & Films

Assessment of CrFeCoNi and AlCrFeCoNi High-Entropy Alloys as Bond Coats for Thermal Barrier Coatings

M. Ossiansson et al.

Summary: Thermally sprayed coatings of high-entropy alloys show potential for applications requiring tribological and oxidation resistant properties. This paper compares the performance of two different high-entropy alloy chemistries with commercial coatings and evaluates their oxidation behavior.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Wear resistance, hardness, and microstructure of carbide dispersion strengthened high-entropy alloys

A. Hegazy Khallaf et al.

Summary: In this study, a (CrFeCoNi) high-entropy alloy was reinforced with different contents of WC particles using powder metallurgy. The results showed that the addition of WC improved the density, compressive strength, wear resistance, and decreased the coefficient of thermal expansion. A mathematical model was established to predict the strength behavior of the material.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

High-Speed Laser Metal Deposition of CrFeCoNi and AlCrFeCoNi HEA Coatings with Narrow Intermixing Zone and their Machining by Turning and Diamond Smoothing

Thomas Lindner et al.

Summary: The production of high-quality high-entropy alloy (HEA) coatings using high-speed laser metal deposition (HS-LMD) is presented in this study. The coatings showed a good agreement with the chemical composition of the powder feedstock material, and chemical intermixing was found only at the substrate interface. The coatings exhibited a homogeneous structure, strong substrate bonding, and improved surface roughness after machining and diamond smoothing.

COATINGS (2022)

Add to Collection

Article Materials Science, Coatings & Films

Effect of the boriding environment on the wear response of laser-clad AlCoCrFeNi high entropy alloy coatings

A. Guenen et al.

Summary: Laser-clad AlCrFeCoNi high entropy alloy coatings were borided and formed a boride layer on the surface, resulting in improved hardness and wear resistance.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

Effect of reinforcement and sintering on dry sliding wear and hardness of titanium - (AlSi)0.5CoFeNi based composite

J. Sharath Kumar et al.

Summary: Due to its weight-to-strength ratio, titanium is widely used, especially in gas turbine engines. By adding a suitable reinforcement, such as a high entropy alloy, the tribological properties of titanium can be improved, as shown in this research.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2022)

Add to Collection

Article

Sliding Wear Investigation of Ni-based Coating for High-Temperature Application

S.W. Rukhande et al.

Tribology in Industry (2021)

Add to Collection

Article Physics, Applied

The effect of Si and Ge on the elastic properties and plastic deformation modes in high- and medium-entropy alloys

Raquel Lizarraga et al.

Summary: Quantum mechanics modeling was used to investigate the effects of Ge and Si solute elements on the elastic properties and plastic deformation modes in high-entropy and medium-entropy alloys. The study revealed that the activated deformation modes in all alloys studied are the stacking fault mode (dominant) and the full-slip mode (secondary), with twining becoming favored as the concentrations of Ge and Si increase. The calculated trends for Young's and shear modulus as well as lattice parameters were verified by measurements.

APPLIED PHYSICS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Powder plasma arc additive manufactured CoCrFeNi(SiC)x high-entropy alloys: Microstructure and mechanical properties

Qingkai Shen et al.

Summary: In this study, powder plasma arc additive manufacturing (PPA-AM) was used for the first time to fabricate CoCrFeNi(SiC)(x) (x = 0, 0.1, 0.3 and 0.5) HEAs. It was found that with increasing of SiC content, the microstructure of CoCrFeNi(SiC)(x) HEAs changed, leading to significant improvements in both hardness and yield strength. The main strengthening mechanism of the HEAs was identified as solid-solution and second phase strengthening.

MATERIALS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of Functional Surface Layers on Stainless Steels by Laser Alloying

Zoia Duriagina et al.

Summary: Laser alloying is an effective method for forming functional surface layers on metallic materials, particularly stainless steels. By optimizing parameters, coatings with complex microstructures and high wear resistance can be produced on AISI 420 and AISI 304 stainless steels.

METALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

CoCrFeNi High-Entropy Alloy Thin Films Synthesised by Magnetron Sputter Deposition from Spark Plasma Sintered Targets

Holger Schwarz et al.

Summary: This study analyzed thin films deposited via magnetron sputtering from two different preparation methods of CoCrFeNi High-Entropy Alloy targets and found that their stoichiometry, phase composition, and microscopic structure were almost identical after film deposition with the same parameters.

COATINGS (2021)

Add to Collection

Review Engineering, Manufacturing

A review on laser cladding of high-entropy alloys, their recent trends and potential applications

Zia Ullah Arif et al.

Summary: High-Entropy Alloys (HEAs) have attracted significant attention in the field of material science and engineering, with their promising applications in coatings for challenging conditions. Laser cladding technology has been explored for improving the performance of HEA materials, leading to the development of Laser-Cladded High-Entropy Alloy Coatings (LC-HEACs). This article reviews the current trends and research gaps in LC-HEACs, highlighting the influence of process parameters and techniques to enhance the quality of the coatings.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Promising properties and future trend of eutectic high entropy alloys

Yiping Lu et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Article Chemistry, Physical

Effect of carbon content on microstructure, hardness and wear resistance of CoCrFeMnNiCx high-entropy alloys

Jin-Kun Xiao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Coatings & Films

High-temperature wear behaviour of AlCoCrFeNiTi0.5 coatings produced by HVOF

Martin Loebel et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Review Materials Science, Multidisciplinary

A Review on High Entropy Alloys Coatings: Fabrication Processes and Property Assessment

Junchen Li et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Article Physics, Multidisciplinary

High-Temperature Wear Behaviour of Spark Plasma Sintered AlCoCrFeNiTi0.5 High-Entropy Alloy

Martin Loebel et al.

ENTROPY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Microstructural Modifications on the Corrosion Resistance of CoCrFeMo0.85Ni Compositionally Complex Alloy Coatings

Francesco Fanicchia et al.

COATINGS (2019)

Add to Collection

Article Materials Science, Coatings & Films

Effects of laser power on microstructure and properties of laser cladded CoCrBFeNiSi high-entropy alloy amorphous coatings

Fengyuan Shu et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Effect of carbon addition on the microstructure and mechanical properties of CoCrFeNi high entropy alloy

Huang TianDang et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)

Add to Collection

Article Chemistry, Physical

Effects of processing route on phase evolution and mechanical properties of CoCrCuFeNiSix high entropy alloys

Anil Kumar et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Structure and properties of lightweight high entropy alloys: a brief review

Ornov Maulik et al.

MATERIALS RESEARCH EXPRESS (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Tribological properties of FeCoCrNiAlBx high-entropy alloys coating prepared by laser cladding

Dan-yang Lin et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2017)

Add to Collection

Article Materials Science, Multidisciplinary

The Phase Composition and Microstructure of AlxCoCrFeNiTi Alloys for the Development of High-Entropy Alloy Systems

Thomas Lindner et al.

METALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and Wear Resistance of AlCoCrFeNiTi High-Entropy Alloy Coatings Produced by HVOF

Martin Loebel et al.

COATINGS (2017)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Processing of AlCoCrFeNiTi high entropy alloy by atmospheric plasma spraying

M. Loebel et al.

19TH CHEMNITZ SEMINAR ON MATERIALS ENGINEERING (2017)

Add to Collection

Article Chemistry, Physical

Effect of carbon content and annealing on structure and hardness of the CoCrFeNiMn-based high entropy alloys

N. D. Stepanov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Processing, alloy composition and phase transition effect on the mechanical and corrosion properties of high entropy alloys: a review

Kenneth Kanayo Alaneme et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition

CY Hsu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating

PK Huang et al.

ADVANCED ENGINEERING MATERIALS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.