☆ 4.6 Article

Enhancement of Tribological Properties of Cubic and Hexagonal Boron Nitride Nanoparticles Impregnated on Bearing Steel via Vacuum Heat Treatment Method

COATINGS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Tribological behavior prediction of composite MoS2-TiO2 coating using Taguchi coupled artificial neural network approach

Avinash Borgaonkar et al.

Summary: Solid lubricants are commonly used in tribological applications due to their excellent lubricating properties in extreme environmental conditions. The tribological performance of lubricated surfaces can be significantly improved by optimizing the coating material properties. In this study, a composite MoS2-TiO2 coating was fabricated and the effects of different parameters on the tribological behavior of the coating were investigated using design of experiment techniques such as Taguchi and artificial neural network (ANN) approach. The study showed that ANN provides more accurate predictions of the responses compared to the Taguchi approach.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Engineering, Mechanical

Tribological Investigation of Composite MoS2-TiO2-ZrO2 Coating Material by Response Surface Methodology Approach

Avinash Borgaonkar et al.

Summary: In this study, the wear resistance of a pure MoS2 coating was improved by incorporating TiO2 and ZrO2 nanoparticles as a reinforcement material. The tribological properties of the composite coating were significantly improved compared to the pure MoS2 coating.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Comprehensive review on improvement in surface properties of bearing steel

Vrushali Y. Bhalerao et al.

Summary: This paper presents a review of techniques used to enhance surface properties of bearing steel SAE 51200, including material selection, deposition methods, and coating materials. Surface modification technology plays a crucial role in improving the life of bearings.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Electrochemistry

Scalable Silicone Composites for Thermal Management in Flexible Stretchable Electronics

George-Theodor Stiubianu et al.

Summary: In this study, hexagonal boron nitride (hBN) was incorporated as an active filler in a customized silicone matrix to obtain high thermal conductivity composites. The composites exhibited high flexibility, low dielectric permittivity, and superior conductive heat flow compared to a commercial heatsink paste.

BATTERIES-BASEL (2022)

Add to Collection

Article Engineering, Mechanical

Tribological and anti-corrosion performance of epoxy resin composite coatings reinforced with differently sized cubic boron nitride (CBN) particles

Zhiping Huang et al.

Summary: By incorporating differently sized cubic boron nitride (CBN) particles into epoxy resin (EP) composite coatings on stainless steel, the tribological and anti-corrosion properties of the coatings can be enhanced. The optimal tribological performance for dry sliding is achieved when the additive proportion of microsized and nanosized CBN particles is 1:1, while the best tribology and corrosion resistance performance in seawater conditions is achieved when the ratio is 2:1. The microparticles play a more important role in load-carrying capacity under seawater lubrication, while a more compact structure improves the electrolyte barrier ability of the composite coatings.

FRICTION (2021)

Add to Collection

Article Materials Science, Ceramics

Influence of preparation method on microstructure and tribological behavior of C/C-BN composites

Fuhai Liu et al.

Summary: In this study, C/C-BN(P) composites were successfully prepared by the combined methods of SI and CVI, exhibiting improved tribological behavior attributed to the combined effect of SI and CVI on the microstructure and mechanical properties. Additionally, the excellent reinforcement of C/C-BN(P) composites can significantly reduce the friction coefficient and wear loss, making them promising materials for anti-friction and wear-resistant applications.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Mechanical

Friction and wear behaviour of composite MoS2-TiO2 coating material in dry sliding contact

Avinash Borgaonkar et al.

Summary: In this study, the tribological performance of MoS2 coating was improved by incorporating TiO2 nanoparticles as a reinforcement material. The composite MoS2-TiO2 coating exhibited excellent tribological properties, with the crystallite size and weight percentage of TiO2 significantly impacting the performance. The influence of temperature and coating thickness on the tribological properties of the composite coating was also investigated, showing a decrease in friction coefficient and an increase in wear rate with higher temperatures and coating thickness.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of heat treatment on microstructural evolution and properties of cemented carbides (WC-17Co) reinforced with 3% volume hexagonal-boron nitride (h-BN) and processed by selective laser sintering (SLS)

Joseph Agyapong et al.

Summary: In this study, a cemented carbide reinforced with 3% Hexagonal-Boron Nitride was processed using selective laser sintering and heat treated to study the effect of elemental composition and post-processing heat treatment on microstructural evolution and mechanical integrity. Heat treatment helped relieve residual stresses, with the as-printed sample recording the highest hardness value and the 1000 degrees C heat-treated sample exhibiting the best wear properties. The h-BN reinforcement demonstrated an improvement and stability in mechanical properties of fabricated parts up to 1000 degrees C.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Plasma Nitriding with a Nitrogen Rich Gas Composition on the Reciprocating Sliding Wear of a DIN 18MnCrSiMo6-4 Steel

Rafael Luciano Dalcin et al.

Summary: In this study, the sliding wear of DIN 18MnCrSiMo6-4 continuous cooling bainitic steel plasma nitrided with a nitrogen rich gas composition was investigated. The samples nitrided at different temperatures and processing times were evaluated for their mechanical and microstructural characteristics. The samples nitrided at 550 degrees C performed better in wear resistance tests due to their thicker compound layer and higher diffusion zone compared to other conditions.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2021)

Add to Collection

Article Engineering, Mechanical

Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel

Zhaoxi Cao et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Materials Science, Coatings & Films

Characterization and wear behavior of TiBC coatings formed by thermoreactive diffusion technique on AISI D6 steel

Bulent Kurt et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Optics

A novel method of laser surface hardening treatment inducing different thermal processing condition for Thin-sectioned 100Cr6 steel

E. Anusha et al.

OPTICS AND LASER TECHNOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

The effect of a boride diffusion layer on the tribological properties of AISI M2 steel

L. Gutierrez-Noda et al.

WEAR (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancement of Tribological Behavior of Rolling Bearings by Applying a Multilayer ZrN/ZrCN Coating

Isabel Claveria et al.

COATINGS (2019)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Theoretical investigations on the fatigue behavior of a tailored forming steel-aluminium bearing component

Timm Coors et al.

PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)

Add to Collection

Review Engineering, Mechanical

Solid Lubrication with MoS2: A Review

Mohammad R. Vazirisereshk et al.

LUBRICANTS (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Design of Experiments Analysis of Abrasive Wear Behavior of Stir Cast Al-TiB2 Composites

Suswagata Poria et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Add to Collection

Article Engineering, Mechanical

Duplex Surface Treatment of AISI 1045 Steel Via Pack Boriding and Plasma Nitriding: Characterization and Tribological Studies

Ali Habibolahzadeh et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Chemistry, Physical

The Impact of Surface Treatment and Degree of Vacuum on the Interface and Mechanical Properties of Stainless Steel Clad Plate

Ying-ying Feng et al.

MATERIALS (2018)

Add to Collection

Article Engineering, Multidisciplinary

Characterization of borided Inconel 625 alloy with different boron chemicals

Ali Gunen et al.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI (2017)

Add to Collection

Article Engineering, Mechanical

A model for rolling bearing life with surface and subsurface survival: Sporadic surface damage from deterministic indentations

Guillermo E. Morales Espejel et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Review Crystallography

How to Increase the h-BN Crystallinity of Microfilms and Self-Standing Nanosheets: A Review of the Different Strategies Using the PDCs Route

Sheng Yuan et al.

CRYSTALS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

2D-nanomaterials for controlling friction and wear at interfaces

Jessica C. Spear et al.

NANO TODAY (2015)

Add to Collection

Article Engineering, Mechanical

Effect of substrate roughness, time and temperature on the processing of iron boride coatings: experimental and statistical approaches

C.I. VillaVelázquez Mendoza et al.

International Journal of Surface Science and Engineering (2014)

Add to Collection

Article Engineering, Mechanical

Friction and wear properties of aligned carbon nanotubes reinforced epoxy composites under water lubricated condition

Lei Yan et al.

WEAR (2013)

Add to Collection

Proceedings Paper Automation & Control Systems

Research and Prospects of Vacuum Heat Treatment Technology

Nie Hui-wen et al.

2013 FOURTH INTERNATIONAL CONFERENCE ON DIGITAL MANUFACTURING AND AUTOMATION (ICDMA) (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Plasma nitriding of AISI 52100 ball bearing steel and effect of heat treatment on nitrided layer

Ravindra Kumar et al.

BULLETIN OF MATERIALS SCIENCE (2011)

Add to Collection

Article Engineering, Mechanical

Reliability evaluation on very high cycle fatigue property of GCr15 bearing steel

W. Li et al.

INTERNATIONAL JOURNAL OF FATIGUE (2010)

Add to Collection

Article Materials Science, Coatings & Films

Coatings tribology drivers for high density plasma technologies

P. A. Dearnley et al.

SURFACE ENGINEERING (2010)

Add to Collection

Article Engineering, Chemical

Tribological Properties of Borided AISI 4140 Steel with the Powder Pack-Boriding Method

Mustafa Ulutan et al.

TRIBOLOGY LETTERS (2010)

Add to Collection

Article Engineering, Industrial

Surface technology for automotive engineering

K. Bewilogua et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)

Add to Collection

Review Engineering, Mechanical

A Review of Rolling Contact Fatigue

Farshid Sadeghi et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Tribological properties of oxidised boride coatings grown on AISI 4140 steel

Saduman Sen et al.

MATERIALS LETTERS (2006)

Add to Collection

Article Materials Science, Coatings & Films

Determination of the optimum conditions for ion nitriding of AISI 5140 steel

A Alsaran et al.

SURFACE & COATINGS TECHNOLOGY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.