Related references
Note: Only part of the references are listed.
Article
Chemistry, Physical
Peilong Xu et al.
Summary: The study demonstrates that indium doping can significantly enhance the sensitivity and selectivity of ZnO nanosheets to acetylene gas. The adsorption energy of acetylene increases significantly after indium doping, with the interaction mainly attributed to electrostatic forces. The indium-doped ZnO nanosheets can selectively detect acetylene in the presence of other gases and exhibit a short recovery time.
Article
Materials Science, Characterization & Testing
Prasanna Kumar Mayakuntla et al.
Summary: A novel proof-of-concept utilizing ultrasonic and laser sensing technologies to monitor corrosion in concrete was successfully implemented in an accelerated corrosion test. The contact-based ultrasonic excitation and non-contact laser-based sensing approach proved to be significantly faster than traditional contact-based methods, with potential for application in inspection of larger concrete structures.
NONDESTRUCTIVE TESTING AND EVALUATION
(2022)
Article
Computer Science, Information Systems
Aman Kumar et al.
Summary: This article discusses the application of Fiber Reinforced Polymer (FRP) in the reinforcement of reinforced concrete structures and the prediction of bond strength between FRP and concrete using machine learning models. It provides an effective method for estimating bond strength and helps researchers save time and cost in estimating bond strength.
Article
Engineering, Civil
Seyed MohammadReza Emrani et al.
Summary: This paper presents a modelling technique for the cyclic nonlinear response of steel-concrete composite shear walls. The technique, which takes advantage of existing macro models for reinforced concrete and steel plate shear walls, is validated and analyzed for sensitivity.
CANADIAN JOURNAL OF CIVIL ENGINEERING
(2022)
Article
Engineering, Civil
John E. Hatfield et al.
Summary: This paper presents an engineering-level analysis methodology that can rapidly predict the velocity of fragments from ungrouted and nonreinforced concrete masonry unit walls subjected to blast loading. The methodology is compared to experimental results and demonstrates a strong correlation.
INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES
(2022)
Article
Engineering, Civil
Masuhiro Beppu et al.
Summary: This study investigated the local failure characteristics of polypropylene fiber reinforced concrete (PPFRC) plates subjected to projectile impact, and found that PPFRC plates have a better effect in suppressing local failure compared to plain concrete plates.
INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES
(2022)
Article
Engineering, Multidisciplinary
Zhenhao Zhang et al.
Summary: This paper proposes a novel approach to determine the target reliability index of concrete structures based on modeling performance degradation as a stochastic process. The approach involves simulating the degradation process using the Wiener process with drift, estimating the drift and diffusion coefficients, deducing the relationship between compressive strength and the amount of degradation, calculating statistical parameters of compressive strength, and determining the reliability index of a structure at different service life. Additionally, the time-varying failure probability of structural durability degradation is calculated based on the drift Wiener process model, and a comparison is made between the calculated time-varying reliability index and the time-varying failure probability to determine the recommended values of target reliability index for structural bearing capacity.
QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL
(2022)
Review
Engineering, Environmental
Junsong Wang et al.
Summary: Pervious pavement system is a suitable alternative technique for mitigating urban flooding and urban heat island simultaneously. However, the existing research primarily focuses on permeability and neglects the evaporative cooling performance, calling for further investigation on the synergistic effects of permeability and evaporative cooling in pervious pavement system.
Article
Computer Science, Artificial Intelligence
Siyu Lu et al.
Summary: In this paper, a bilateral adaptive control method based on PEB control structure is proposed to study the uncertainty of dynamic parameters and time delay. The stability and tracking performances of the closed-loop constant time delay teleoperation system are analyzed using Lyapunov stability theory. The simulation results show that the proposed method has good control performance.
FRONTIERS IN NEUROROBOTICS
(2022)
Article
Computer Science, Information Systems
Yuxi Ban et al.
Summary: This paper proposes two methods to solve the problem of depth estimation of defiant images in microscopic scenes, which are based on Markov random field and geometric constraints. Both methods improve the efficiency of depth estimation.
Article
Construction & Building Technology
Wei Zhang et al.
Summary: This study analyzes the mixed-mode debonding behavior of the FRP-concrete interface using a 3D cohesive zone model, providing a detailed description of interfacial damage propagation and friction-sliding evolution. Numerical models based on the proposed model are built and compared with experimental results, showing good agreement. The study also investigates the impact of key parameters such as peeling angle, strength ratio, energy ratio, and friction coefficient on the interfacial bond capacity.
CONSTRUCTION AND BUILDING MATERIALS
(2022)
Article
Materials Science, Multidisciplinary
Nibras Farooq Hussen et al.
Summary: This research experimentally investigated the influence of water-absorbent polymer balls (WAPB) on the structural behavior of reinforced concrete beams. The results showed that increasing the volume percentage of WAPB had a significant effect on the maximum load capacity and deflection of the beams.
JOURNAL OF THE MECHANICAL BEHAVIOR OF MATERIALS
(2022)
Article
Environmental Studies
Linfeng Xu et al.
Summary: This study utilized the PLUS model to simulate the urban land expansion in the metropolitan area of Hangzhou. The accuracy of the simulation, measured by kappa coefficient, was high, especially in short-term predictions of urban expansion.
Article
Construction & Building Technology
Xu Cai et al.
Summary: This study evaluated the performance of cement treated permeable concrete containing CB as the road base and found that CB contributed to fast-drying and low shrinkage. It was recommended that concrete containing 15% of CB in weight (CB-15) was suitable for moderate traffic level, and the concrete without CB (CB-0) for high traffic level. This study suggested a potential direction for large-scale application of RCA and CB as the concept of environmental protection becomes recognized worldwide.
ROAD MATERIALS AND PAVEMENT DESIGN
(2021)
Review
Engineering, Geological
Chunwei Zhang et al.
Summary: The historical development and practical implementation of structural base isolation systems working on the principle of friction were discussed in this paper, analyzing various parameters influencing the overall performance and comparing traditional systems with newly introduced smart isolators. Suggestions for future research and design optimization utilizing new materials were also provided.
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING
(2021)
Review
Green & Sustainable Science & Technology
Zane Vincevica-Gaile et al.
Summary: When implementing construction works on weak soils, using environmentally friendly soil stabilization methods with various secondary raw materials can replace traditional methods, achieving resource conservation and energy savings.
Article
Chemistry, Applied
Doaa Samir Mahmoud et al.
Summary: The research found that the absorption characteristics and gel fraction of NaPA depend on the content of the cross-linker in the system. SAPs are used to improve the absorbance behavior and performance of the NR to produce roofing sheets for use in hot weather. The morphology of the obtained rubber compound was well explained using a scanning electron microscope.
PIGMENT & RESIN TECHNOLOGY
(2021)
Review
Materials Science, Composites
Andrey E. Krauklis et al.
Summary: The recent events, such as the ban on composite landfilling in Germany, decommissioning of composite wind turbines, acceleration of aircraft decommissioning, and increase of composites in mass production cars have significantly increased the pressure for developing sustainable composite recycling solutions. The authors of the study propose that identifying optimal recycling methods for various types of fiber reinforced composites is crucial for the future. The manuscript provides a comprehensive overview of recycling technologies for fiber reinforced composites at both low and high Technology Readiness Levels, aiming to guide the sustainable development of the industry and benefit the society.
JOURNAL OF COMPOSITES SCIENCE
(2021)
Review
Polymer Science
Abdalrhman Milad et al.
JOURNAL OF RUBBER RESEARCH
(2020)
Article
Water Resources
Aysha Akter et al.
WATER SCIENCE AND ENGINEERING
(2020)
Article
Multidisciplinary Sciences
Husnain Haider et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
(2019)
