Related references
Note: Only part of the references are listed.Energy absorbed ability and damage analysis for honeycomb sandwich material of bio-inspired micro aerial vehicle under low velocity impact
Jianxun Du et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2023)
Micro-Mesoporous Carbons from Cyclodextrin Nanosponges Enabling High-Capacity Silicon Anodes and Sulfur Cathodes for Lithiated Si-S Batteries
Mojtaba Alidoost et al.
CHEMISTRY-A EUROPEAN JOURNAL (2022)
From biology to biomimicry: Using nature to build better structures-A review
Mohammad Kaiser Ahamed et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Compression behaviors of the bio-inspired hierarchical lattice structure with improved mechanical properties and energy absorption capacity
Mingzhi Wang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Lignin as Polymer Electrolyte Precursor for Stable and Sustainable Potassium Batteries
Sabrina Trano et al.
CHEMSUSCHEM (2022)
Mechanical properties and energy absorption of bio-inspired hierarchical circular honeycomb
Ngoc San Ha et al.
COMPOSITES PART B-ENGINEERING (2022)
Uncover the underlying mechanisms of topology and structural hierarchy in energy absorption performances of bamboo-inspired tubular honeycomb
Wen Zhang et al.
EXTREME MECHANICS LETTERS (2022)
Cardanol-Derived Epoxy Resins as Biobased Gel Polymer Electrolytes for Potassium-Ion Conduction
Eleonora Manarin et al.
ACS APPLIED POLYMER MATERIALS (2022)
Investigation of the effect of wavy honeycomb on the bending performance of the sandwich structure
Alparslan Solak et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2022)
A transient dual-type sensor based on MXene/cellulose nanofibers composite for intelligent sedentary and sitting postures monitoring
Haizhou Huang et al.
CARBON (2022)
Energy absorption capability of graded and non-graded sheet-based gyroid structures fabricated by microcast processing*
Leonie Wallat et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
In-plane energy absorption characteristics and mechanical properties of 3D printed novel hybrid cellular structures
M. Sadegh Ebrahimi et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Adhesive hydrogels tailored with cellulose nanofibers and ferric ions for highly sensitive strain sensors
Cancan Shan et al.
CHEMICAL ENGINEERING JOURNAL (2022)
Representative Cell Analysis for Damage-Based Failure Model of Polymer Hexagonal Honeycomb Structure under the Out-of-Plane Loadings
Muhammad Salman Khan et al.
POLYMERS (2021)
Linear-Nonlinear Stiffness Responses of Carbon Fiber-Reinforced Polymer Composite Materials and Structures: A Numerical Study
S. S. R. Koloor et al.
POLYMERS (2021)
Laser-based additively manufactured bio-inspired crashworthy structure: Energy absorption and collapse behaviour under static and dynamic loadings
Xi Wang et al.
MATERIALS & DESIGN (2021)
Performance of 3D printed topologically optimized novel auxetic structures under compressive loading: experimental and FE analyses
Sohail Gohar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
M. Benedetti et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
Nanosponge-Based Composite Gel Polymer Electrolyte for Safer Li-O2 Batteries
Julia Amici et al.
POLYMERS (2021)
Design and modeling of bamboo biomorphic structure for in-plane energy absorption improvement
Chukwuzubelu Okenwa Ufodike et al.
MATERIALS & DESIGN (2021)
On the structural parameters of honeycomb-core sandwich panels against low-velocity impact
Guangyong Sun et al.
COMPOSITES PART B-ENGINEERING (2021)
Bioinspired energy absorbing material designs using additive manufacturing
Aniket Ingrole et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
A review of additive manufacturing of metamaterials and developing trends
Junxiang Fan et al.
MATERIALS TODAY (2021)
State-of-the-art review on honeycomb sandwich composite structures with an emphasis on filler materials
Navin Kumar Chandrasekaran et al.
POLYMER COMPOSITES (2021)
Sandwich Structures for Energy Absorption Applications: A Review
Faris Tarlochan
MATERIALS (2021)
Advances of composite cross arms with incorporation of material core structures: Manufacturability, recent progress and views
A. L. Amir et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Multiscale understanding in fracture resistance of bamboo skin
Junhe Cui et al.
EXTREME MECHANICS LETTERS (2021)
Estimation of wavy honeycombs' compression performance via a machine learning algorithm
Alparslan Solak et al.
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2021)
Recent Progress in Electrolyte Development and Design Strategies for Next-Generation Potassium-Ion Batteries
Rakesh Verma et al.
BATTERIES & SUPERCAPS (2021)
Mechanical properties of spider-web hierarchical honeycombs subjected to out-of-plane impact loading
Qiang He et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2020)
Experimental study of a honeycomb energy-absorbing device for high-speed trains
Benhuai Li et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2020)
A review of recent research on bio-inspired structures and materials for energy absorption applications
Ngoc San Ha et al.
COMPOSITES PART B-ENGINEERING (2020)
Crashworthiness design of self-similar graded honeycomb-filled composite circular structures
Yuze Nian et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Out-of-plane mechanical behaviors of a side hierarchical honeycomb
Yong Zhang et al.
MECHANICS OF MATERIALS (2020)
Distribution of chemical residues in the beehive compartments and their transfer to the honeybee brood
Maria Murcia Morales et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
On impacting mechanical behaviors of side fractal structures
Yong Zhang et al.
THIN-WALLED STRUCTURES (2020)
Beamless Metal Additive Manufacturing
Mohammad Vaezi et al.
MATERIALS (2020)
Bioinspired hierarchical impact tolerant materials
Susana Estrada et al.
BIOINSPIRATION & BIOMIMETICS (2020)
Study on mechanical properties of multi -structure dactyl -inspired sandwich honeycomb with basalt fiber
Qigang Han et al.
COMPOSITE STRUCTURES (2020)
Effects of cell aspect ratio and relative density on deformation response and failure of honeycomb core structure
Muhammad Salman Khan et al.
MATERIALS RESEARCH EXPRESS (2020)
Mechanical properties and energy absorption characteristics of tropical fruit durian (Durio zibethinus)
Ngoc San Ha et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Crashworthiness of innovative hexagonal honeycomb-like structures subjected to out-of-plane compression
Zhong-gang Wang et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)
Fabrication of High-Quality Polymer Composite Frame by a New Method of Fiber Winding Process
Jaroslav Mlynek et al.
POLYMERS (2020)
A high toughness and light weight armor structure bioinspired design based on a bovine hoof wall
Bingfeng Wang et al.
MATERIALS LETTERS (2020)
Experimental investigation on impact and bending properties of a novel dactyl-inspired sandwich honeycomb with carbon fiber
Qigang Han et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
An Overview of Material Extrusion Troubleshooting
Giselle Hsiang Loh et al.
APPLIED SCIENCES-BASEL (2020)
In-plane impact resistance enhancement with a graded cell-wall angle design for auxetic metamaterials
Xin Wu et al.
COMPOSITE STRUCTURES (2020)
Crushing analysis and design optimization for foam-filled aluminum/CFRP hybrid tube against transverse impact
Shunfeng Li et al.
COMPOSITES PART B-ENGINEERING (2020)
In-plane crushing behavior of density graded cross-circular honeycombs with zero Poisson's ratio
Hexiang Wu et al.
THIN-WALLED STRUCTURES (2020)
Moisture Absorption Effects on Mode II Delamination of Carbon/Epoxy Composites
King Jye Wong et al.
POLYMERS (2020)
A review of impact resistant biological and bioinspired materials and structures
Benjamin S. Lazarus et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Recent Progress in 3D Printing of Bioinspired Structures
Danfeng Wang et al.
FRONTIERS IN MATERIALS (2020)
Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review
Jianjun Zhang et al.
COMPOSITES PART B-ENGINEERING (2020)
Compression properties of metal beetle elytron plates and the elementary unit of the trabecular-honeycomb core structure
Xiaoming Zhang et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)
Experimental and numerical study on the energy absorption abilities of trabecular-honeycomb biomimetic structures inspired by beetle elytra
Xindi Yu et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion
I. Saenz-Dominguez et al.
COMPOSITES PART B-ENGINEERING (2019)
Preparation and impact resistance performance of bionic sandwich structure inspired from beetle forewing
Zhen-bing Cai et al.
COMPOSITES PART B-ENGINEERING (2019)
Crushing resistance and energy absorption of pomelo peel inspired hierarchical honeycomb
Zhang Wen et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)
A natural energy absorbent polymer composite: The equine hoof wall
Wei Huang et al.
ACTA BIOMATERIALIA (2019)
Energy-absorption characteristics of a bionic honeycomb tubular nested structure inspired by bamboo under axial crushing
Dayong Hu et al.
COMPOSITES PART B-ENGINEERING (2019)
Biomimetic architected materials with improved dynamic performance
Zian Jia et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Metallic tube-reinforced aluminum honeycombs: Compressive and bending performances
Yunwei Zhang et al.
COMPOSITES PART B-ENGINEERING (2019)
In-plane dynamic crushing of a novel circular-celled honeycomb nested with petal-shaped mesostructure
Xianfeng Yang et al.
COMPOSITE STRUCTURES (2019)
Mechanical properties and energy absorption of 3D printed square hierarchical honeycombs under in-plane axial compression
Yong Tao et al.
COMPOSITES PART B-ENGINEERING (2019)
A numerical study on the in-plane dynamic crushing of self-similar hierarchical honeycombs
Qiang He et al.
MECHANICS OF MATERIALS (2019)
How does bio-inspired graded honeycomb filler affect energy absorption characteristics?
Yuze Nian et al.
THIN-WALLED STRUCTURES (2019)
Crushing behavior of honeycomb structure: a review
Tiju Thomas et al.
INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2019)
Energy absorption of a bio-inspired honeycomb sandwich panel
Ngoc San Ha et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Mechanical performance of vertex-based hierarchical vs square thin-walled multi-cell structure
Zhonggang Wang et al.
THIN-WALLED STRUCTURES (2019)
Compressive behaviour of 3D printed thermoplastic polyurethane honeycombs with graded densities
Simon R. G. Bates et al.
MATERIALS & DESIGN (2019)
Mechanical properties of bio-mimetic energy-absorbing materials under impact loading
Peng Hao et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Nanomaterial-Enabled Wearable Sensors for Healthcare
Shanshan Yao et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Crashworthiness design of novel hierarchical hexagonal columns
Xiang Xu et al.
COMPOSITE STRUCTURES (2018)
Impact energy absorption of bio-inspired tubular sections with structural hierarchy
H. H. Tsang et al.
COMPOSITE STRUCTURES (2018)
Ripplecomb: A novel triangular tube reinforced corrugated honeycomb for energy absorption
Xianfeng Yang et al.
COMPOSITE STRUCTURES (2018)
Numerical and analytical investigation on crushing of fractal-like honeycombs with self-similar hierarchy
Dahai Zhang et al.
COMPOSITE STRUCTURES (2018)
In-plane crashworthiness of bio-inspired hierarchical honeycombs
Hanfeng Yin et al.
COMPOSITE STRUCTURES (2018)
On the influence of structural defects for honeycomb structure
Zhonggang Wang et al.
COMPOSITES PART B-ENGINEERING (2018)
A review on functionally graded structures and materials for energy absorption
Fengxiang Xu et al.
ENGINEERING STRUCTURES (2018)
Microstructure evolution and mechanical properties of gamma-TiAl honeycomb structure fabricated by isothermal forging and pulse current assisted diffusion bonding
Chengcheng Shi et al.
INTERMETALLICS (2018)
Approaching perfect energy absorption through structural hierarchy
Hualin Fan et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2018)
On hierarchical honeycombs under out-of-plane crushing
Jianguang Fang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Energy absorption characteristics of bio-inspired honeycomb column thin walled structure under impact loading
Peng Hao et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Behavior of auxetic structures under compression and impact forces
Chulho Yang et al.
SMART MATERIALS AND STRUCTURES (2018)
Out-of-plane crashworthiness analysis of bio-inspired aluminum honeycomb patterned with horseshoe mesostructure
Xianfeng Yang et al.
THIN-WALLED STRUCTURES (2018)
Crashworthiness design for bio-inspired multi-cell tubes with quadrilateral, hexagonal and octagonal sections
Linwei Zhang et al.
THIN-WALLED STRUCTURES (2018)
3D printed hierarchical honeycombs with shape integrity under large compressive deformations
Yanyu Chen et al.
MATERIALS & DESIGN (2018)
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Audrey Velasco-Hogan et al.
ADVANCED MATERIALS (2018)
Stress concentration in octagonal honeycombs due to defects
Shengchao Ouyang et al.
COMPOSITE STRUCTURES (2018)
High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations
Guangyong Sun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Investigation on Microstructure of Beetle Elytra and Energy Absorption Properties of Bio-Inspired Honeycomb Thin-Walled Structure under Axial Dynamic Crushing
Jianxun Du et al.
NANOMATERIALS (2018)
Crashworthiness of bionic fractal hierarchical structures
Yong Zhang et al.
MATERIALS & DESIGN (2018)
Numerical analysis of the impact resistance in aluminum alloy bi-tubular thin-walled structures designs inspired by beetle elytra
Jinwu Xiang et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Energy absorption characteristics of bio-inspired honeycomb structure under axial impact loading
Jinwu Xiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments
Ahmad Baroutaji et al.
THIN-WALLED STRUCTURES (2017)
The deformation mode and strengthening mechanism of compression in the beetle elytron plate
Jinxiang Chen et al.
MATERIALS & DESIGN (2017)
Experimental and numerical study on honeycomb sandwich panels under bending and in-panel compression
Guangyong Sun et al.
MATERIALS & DESIGN (2017)
Mechanical Properties of Interfaces in Inkjet 3D Printed Single- and Multi-Material Parts
Jochen Mueller et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2017)
Comparative Study of Trigger Configuration for Enhancement of Crashworthiness of Automobile Crash Box Subjected to Axial Impact Loading
N. Nasir Hussain et al.
PLASTICITY AND IMPACT MECHANICS (2017)
Design and materials development of automotive crash box: a review
N. S. B. Yusof et al.
CIENCIA & TECNOLOGIA DOS MATERIAIS (2017)
Large deformation of an arc-Miura structure under quasi-static load
X. M. Xiang et al.
COMPOSITE STRUCTURES (2017)
Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: Experimental tests and numerical simulations
Chang Qi et al.
COMPOSITE STRUCTURES (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Additive manufacturing of biologically-inspired materials
Andre R. Studart
CHEMICAL SOCIETY REVIEWS (2016)
On compressive properties of composite sandwich structures with grid reinforced honeycomb core
Zhi Sun et al.
COMPOSITES PART B-ENGINEERING (2016)
Dynamic crushing behavior of functionally graded honeycomb structures with random defects
Tao Fan
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2016)
In-plane crushing of a hierarchical honeycomb
Jinxiu Qiao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
On design of graded honeycomb filler and tubal wall thickness for multiple load cases
Guohua Zhu et al.
THIN-WALLED STRUCTURES (2016)
A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo
Meng Zou et al.
THIN-WALLED STRUCTURES (2016)
Mechanical Stress Induces Remodeling of Vascular Networks in Growing Leaves
Yohai Bar-Sinai et al.
PLOS COMPUTATIONAL BIOLOGY (2016)
Crashworthiness of vertex based hierarchical honeycombs in out-of-plane impact
Guangyong Sun et al.
MATERIALS & DESIGN (2016)
Honeycomb-corrugation hybrid as a novel sandwich core for significantly enhanced compressive performance
Bin Han et al.
MATERIALS & DESIGN (2016)
Spiderweb honeycombs
D. Mousanezhad et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Review of beetle forewing structures and their biomimetic applications in China: (II) On the three-dimensional structure, modeling and imitation
Jinxiang Chen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Bioinspired engineering of honeycomb structure - Using nature to inspire human innovation
Qiancheng Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Optimization of foam-filled double circular tubes under axial and oblique impact loading conditions
F. Djarnaluddin et al.
THIN-WALLED STRUCTURES (2015)
Dynamic crushing of uniform and density graded cellular structures based on the circle arc model
Jianjun Zhang et al.
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Influences of defects on dynamic crushing properties of functionally graded honeycomb structures
Tao Fan et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2015)
Bio-inspired impact-resistant composites
L. K. Grunenfelder et al.
ACTA BIOMATERIALIA (2014)
Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness
Guangyong Sun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)
Dynamic crushing behavior absorption of honeycombs with density gradient
Xin-chun Zhang et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2014)
Hierarchical multiscale structure-property relationships of the red-bellied woodpecker (Melanerpes carolinus) beak
Nayeon Lee et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2014)
Analyses on the dynamic strength of honeycombs under the y-directional crushing
Lingling Hu et al.
MATERIALS & DESIGN (2014)
Theoretical and numerical investigation on the crush resistance of rhombic and kagome honeycombs
Xiong Zhang et al.
COMPOSITE STRUCTURES (2013)
Statistical finite element analysis of the buckling behavior of honeycomb structures
Domenico Asprone et al.
COMPOSITE STRUCTURES (2013)
Dynamic behavior of graded honeycombs - A finite element study
C. J. Shen et al.
COMPOSITE STRUCTURES (2013)
The bending and failure of sandwich structures with auxetic gradient cellular cores
Y. Hou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Light-weight thin-walled structures with patterned windows under axial crushing
Jie Song et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces
F. Tarlochan et al.
THIN-WALLED STRUCTURES (2013)
In-plane elastic buckling of hierarchical honeycomb materials
Qiang Chen et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2012)
Foil Optimization in Tailor Welded Blank of an Automotive Floor Component
K. Hariharan et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
The Stomatopod Dactyl Club: A Formidable Damage-Tolerant Biological Hammer
James C. Weaver et al.
SCIENCE (2012)
Damage Mechanics Model for Fracture Process of Steel-concrete Composite Slabs
M. Joshani et al.
TRENDS IN AUTOMOTIVE RESEARCH (2012)
Experimental and numerical crashworthiness investigation of empty and foam-filled end-capped conical tubes
Ali Ghamarian et al.
THIN-WALLED STRUCTURES (2011)
Static and fatigue load performance of a gfrp honeycomb bridge deck
Guido Camata et al.
COMPOSITES PART B-ENGINEERING (2010)
Compressive behaviour of closed-cell aluminium foams at high strain rates
Jianhu Shen et al.
COMPOSITES PART B-ENGINEERING (2010)
Transverse shear stiffness of thickness gradient honeycombs
C. Lira et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Some theoretical considerations on the dynamic response of sandwich structures under impulsive loading
Feng Zhu et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Energy-absorbing effectiveness factor
Norman Jones
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Effects of defects on the in-plane dynamic crushing of metal honeycombs
Xin-Chun Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2010)
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Anoop Kumar Sood et al.
MATERIALS & DESIGN (2010)
Stress concentration due to defects in a honeycomb structure
D. H. Chen et al.
COMPOSITE STRUCTURES (2009)
Mechanical behaviour and energy absorption of closed-cell aluminium foam panels in uniaxial compression
M. I. Idris et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Computer aided material selection for circular tubes designed to resist axial crushing
Annette Meidell
THIN-WALLED STRUCTURES (2009)
Theoretical and finite element study of a compact energy absorber
M. Ali et al.
ADVANCES IN ENGINEERING SOFTWARE (2008)
The Energy-Absorbing Characteristics of Tubular Structures With Geometric and Material Modifications: An Overview
S. Chung Kim Yuen et al.
Applied Mechanics Reviews (2008)
Increasing of the drawing depth using tailor rolled blanks - Numerical and experimental analysis
A. Meyer et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Impact damage resistance and tolerance of honeycomb core sandwich panels
K. S. Raju et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Basic study of biomimetic composite materials in the forewings of beetles
Jinxiang Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Metallic tube type energy absorbers: A synopsis
A. G. Olabi et al.
THIN-WALLED STRUCTURES (2007)
Biomimetics: its practice and theory
Julian F. V. Vincent et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2006)
Impact damage processes in composite sheet and sandwich honeycomb materials
JP Dear et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2005)
Collapsible impact energy absorbers: an overview
AAA Alghamdi
THIN-WALLED STRUCTURES (2001)
Share Paper
