☆ 4.8 Article

Reliability Theory and Practice for Unmanned Aerial Vehicles

IEEE INTERNET OF THINGS JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Information Systems

Towards a robust FANET: Distributed node importance estimation-based connectivity maintenance for UAV swarms

Chao Liu et al.

Summary: This paper proposes a distributed connectivity maintenance framework that considers the vulnerability of nodes and the robustness of a network, including the design of distributed neighbor selection rules and connectivity maintenance strategies. An algorithm for approximating the AC measure of the network is developed, and numerical simulation results are presented to validate the effectiveness of the framework.

AD HOC NETWORKS (2022)

Add to Collection

Review Computer Science, Information Systems

A review of AI-enabled routing protocols for UAV networks: Trends, challenges, and future outlook

Arnau Rovira-Sugranes et al.

Summary: This paper reviews the use of AI-enabled routing protocols in aerial networks, focusing on topology prediction and self-adaptive learning-based routing algorithms that can accommodate highly dynamic network topology. The paper justifies the importance and adaptation of AI into UAV network communications and discusses related topics such as mobility and networking models, simulation tools and public datasets, and relations to UAV swarming. The paper also presents future trends and the remaining challenges in AI-based UAV networking.

AD HOC NETWORKS (2022)

Add to Collection

Article Engineering, Aerospace

Failure behavior analysis of phased-mission systems considering functional and physical isolation effects

Ying Chen et al.

Summary: This paper analyzes the impact of physical isolation on the reliability analysis of phased-mission systems (PMS), and proposes corresponding models and analysis methods. The case study demonstrates the significant influence of physical isolation on component degradation.

CHINESE JOURNAL OF AERONAUTICS (2022)

Add to Collection

Article Automation & Control Systems

Risk Control of Mission-Critical Systems: Abort Decision-Makings Integrating Health and Age Conditions

Li Yang et al.

Summary: This article explores how to design mission abort policies in order to balance the possibility of mission success and system survivability in a mission environment. By considering the degradation degree of monitored health features and system age, operators can abort the mission at early system ages if the degradation reaches a preset control limit. The performance of some heuristic abort policies is analyzed for comparison. The contribution of this article lies in scheduling mission abort plans that utilize both condition monitoring and age information, which enhances the timeliness and robustness of risk control. A case study on inertial navigation systems of UAV executing line inspection missions is used to demonstrate the applicability and superiority of the proposed abort policies.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2022)

Add to Collection

Article Engineering, Industrial

Optimal mission aborting in multistate systems with storage

Gregory Levitin et al.

Summary: This paper discusses the modeling and optimization of mission aborting rules (MARs) for multistate systems with product storage, aiming to maximize the mission success probability (MSP) while meeting a desired level of damage avoidance probability (DAP). A numerical algorithm is proposed to evaluate the MSP and DAP of the system, and a constrained optimization problem is formulated and solved to find the optimal MAR. The study also investigates the influences of storage capacity, storage performance constraints, and desired DAP level on system performance metrics and MAR optimization solutions using a power system example.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

A novel decision support system for managing predictive maintenance strategies based on machine learning approaches

S. Arena et al.

Summary: In today's industrial environment, Industry 4.0 has gained interest worldwide, leading to significant digital transformation among manufacturers. Predictive Maintenance (PdM) based on Machine Learning (ML) is a prominent data-driven analytical approach aimed at monitoring industrial systems to maximize reliability and efficiency.

SAFETY SCIENCE (2022)

Add to Collection

Article Computer Science, Information Systems

6G Internet of Things: A Comprehensive Survey

Dinh C. Nguyen et al.

Summary: This article explores the emerging opportunities brought by 6G technologies in IoT networks and applications. It sheds light on fundamental 6G technologies and discusses their roles in various prospective IoT applications. The article highlights research challenges and potential directions for further research in this promising area.

IEEE INTERNET OF THINGS JOURNAL (2022)

Add to Collection

Article Computer Science, Information Systems

Energy-Efficient UAV-Aided Target Tracking Systems Based on Edge Computing

Xiaoheng Deng et al.

Summary: This article develops an energy-efficient UAV-aided target tracking system by offloading video processing tasks from UAV to edge nodes. The proposed algorithm achieves higher energy efficiency and lower latency in UAV-aided target tracking compared to existing methods.

IEEE INTERNET OF THINGS JOURNAL (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A holistic risk-based maintenance methodology for transmission overhead lines using tower specific health indices and value of loss load

Henri Manninen et al.

Summary: This paper presents a risk-based maintenance decision-making methodology for transmission overhead lines, which improves the input data quality with machine learning algorithms and determines the probability of failure for each asset using asset health indices and survival analysis. This methodology can minimize risks in a more cost-effective manner compared to traditional approaches and highlights the most critical elements.

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2022)

Add to Collection

Article Engineering, Industrial

Mission aborting and system rescue for multi-state systems with arbitrary structure

Gregory Levitin et al.

Summary: This paper co-models mission failure-triggered rescue procedures and system state-triggered rescue procedures for reliability analysis of multi-state systems. A probabilistic modeling method is proposed, and different mission abort rules are investigated and compared.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

Optimal routes and aborting strategies of trucks and drones under random attacks

Rui Yan et al.

Summary: This paper explores the optimal routes and aborting strategies of trucks and drones under random attacks. By considering time windows, aborting strategies, and random attacks, the shortcomings of drones are addressed, and a preliminary survey is conducted in the field of emergency management or military. The proposed ALNS-SP algorithm combines adaptive large neighborhood search and short-path algorithm to solve the vehicle routing problem, and comparative experiments are conducted.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

A condition-based maintenance policy for continuously monitored multi-component systems with economic and stochastic dependence

Jordan L. Oakley et al.

Summary: This paper proposes a condition-based maintenance policy for multi-component systems that incorporate both stochastic and economic dependence, aiming to optimize replacement decisions. The policy includes a utility function that balances rewards of clustering component replacements with costs of load sharing. Through numerical studies, it is shown that this policy outperforms other alternative policies by reducing system life-cycle costs.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Engineering, Industrial

Reliability modelling for linear and circular k-out-of-n: F systems with shared components

Juan Yin et al.

Summary: This work discusses models for linear and circular k-out-of-n: F systems with shared components and m subsystems. The reliability of the systems is obtained by calculating the probability of the number of failed components in each common area and using the Markov chain technique to calculate the transition rate matrix.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Computer Science, Information Systems

UAV-Aided Energy-Efficient Edge Computing Networks: Security Offloading Optimization

Xiaohui Gu et al.

Summary: Unmanned aerial vehicles (UAVs) face challenges in terms of limited computational capability and energy when conducting complex applications that require huge computational resources and low latency. The utilization of wireless power transfer (WPT) and multiaccess edge computing (MEC) can address these challenges by offloading computational tasks from UAVs to MEC servers through wireless communications. This study proposes a UAV-MEC (UMEC) system with energy harvesting (EH) and full-duplex protocol to receive confidential data from UAVs and broadcast control instructions while ensuring security. In order to improve energy efficiency, the allocation of computational communication resources is optimized based on consumed and harvested energy. The proposed system takes into account the worst case secrecy offloading rate and computation-latency constraint to enhance reliability and security.

IEEE INTERNET OF THINGS JOURNAL (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A hierarchical Bayesian regression framework for enabling online reliability estimation and condition-based maintenance through accelerated testing

Leonardo Leoni et al.

Summary: This study proposes a novel methodology that utilizes accelerated life testing data to define the impact of relevant variables on reliability indicators and plan maintenance actions through online reliability estimation. The methodology employs a generalized linear model and hierarchical Bayesian regression to model and estimate the parameters, while considering the non-linear correlation among data and variability of condition monitoring data sources.

COMPUTERS IN INDUSTRY (2022)

Add to Collection

Article Computer Science, Information Systems

Event Tree Reliability Analysis of Safety Critical Systems Using Theorem Proving

Mohamed Abdelghany et al.

Summary: The article introduces the application of event tree (ET) analysis in safety-critical system design and formal modeling techniques, proposes new mathematical ET probabilistic formulations, and validates the formalization effectiveness of ET through practical examples.

IEEE SYSTEMS JOURNAL (2022)

Add to Collection

Article Engineering, Chemical

Self-Adaptive Risk-Based Inspection Planning in Petrochemical industry by evolutionary algorithms

Sh Dabagh et al.

Summary: This research proposes a multi-objective mathematical model for Self-Adaptive Risk-Based Inspection Planning (SARBIP) and validates the proposed model through a real case study in the Iranian petrochemical industry. The model aims to obtain optimal solutions by reducing both expenses and risk levels.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2022)

Add to Collection

Article Engineering, Industrial

Importance measure-based phased mission reliability and UAV number optimization for swarm

Qiang Feng et al.

Summary: This study analyzes the mission reliability of UAV swarms and proposes a model for calculating reliability and importance measures to describe the effect of changes in the number of UAVs on mission reliability. Furthermore, an optimization model is established to maximize mission reliability by arranging the number of UAVs in the swarm, and the advantages of the proposed method are demonstrated.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Automation & Control Systems

Mission Aborting in n-Unit Systems With Work Sharing

Gregory Levitin et al.

Summary: This article focuses on condition-based mission abort rules for nonrepairable work-sharing systems, proposing a probabilistic model algorithm to evaluate performance metrics and optimizing the mission abort rules using a genetic algorithm. The research is demonstrated through an example of a chemical reactor system, showing the application of the algorithm and the benefits of optimized MAR policies compared to the "no abort" policy and the most conservative abort policy.

IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS (2022)

Add to Collection

Article Engineering, Industrial

Using kamikaze components in multi-attempt missions with abort option

Gregory Levitin et al.

Summary: This paper introduces a new shock-based abort policy model for multi-attempt missions. The model allows for different subsets of components and abort policies to be chosen for each attempt, and uses genetic algorithm for optimization. The effectiveness of the proposed model and solutions are illustrated through a detailed case study.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

Add to Collection

Article Energy & Fuels

Risk-based maintenance strategy selection for wind turbine composite blades

Javier Contreras Lopez et al.

Summary: Blades, as crucial components of wind turbines, have significant impact on both capital and operational costs. However, the failure modes and processes of the composite materials used in the blades are not well understood. Therefore, conducting a systematic study to analyze the failure modes and their criticalities is essential for reducing operational and maintenance costs. The results of this study can provide insights into maintenance strategies and risk mitigation techniques, contributing to the development of dynamic decision support systems.

ENERGY REPORTS (2022)

Add to Collection

Review Computer Science, Interdisciplinary Applications

UAV Communication Networks Issues: A Review

Haque Nawaz et al.

Summary: The unmanned aerial vehicle communication networks consist of a group of UAVs flying autonomously in free space, facing challenges in collaboration and communication, such as communication link failures due to high speed and power limitations.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Unmanned Aerial Vehicle for Transmission Line Inspection: Status, Standardization, and Perspectives

Xin Li et al.

Summary: China, as the largest country in power consumption and generation, has been using UAV technology for transmission line inspection for many years, accumulating rich experiences and improving standardization system. However, there are still obstacles that need to be tackled, and further research and improvement are required.

FRONTIERS IN ENERGY RESEARCH (2021)

Add to Collection

Article Engineering, Multidisciplinary

Optimal allocation of multi-state elements in a sliding window system with phased missions

Kunxiang Yi et al.

Summary: This research proposes a novel generalized linear sliding window system for reliability evaluation of nodes in phased-mission systems, and determines the optimal element allocation strategy using particle swarm optimization. It has been confirmed effective through a set of numerical experiments.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART O-JOURNAL OF RISK AND RELIABILITY (2021)

Add to Collection

Review Automation & Control Systems

A review on absolute visual localization for UAV

Andy Couturier et al.

Summary: Research on unmanned aerial vehicles is increasing due to their affordability and availability. Absolute visual localization has emerged as a main approach for vision-based localization, which aims to locate the UAV in a reference map or imagery. Existing approaches in this field include template matching, feature points matching, deep learning, and visual odometry.

ROBOTICS AND AUTONOMOUS SYSTEMS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Application of enhanced methods for safety assessment of FADEC

Jiri Hlinka et al.

Summary: The paper discusses the importance of safety and reliability assessment in the development process of modern aviation products, presenting innovative evaluation methods that can save time and costs to address regulatory restrictions. By applying FMECA, fuzzy logic, and multiple-criteria decision analysis, the effectiveness of safety assessment is further enhanced.

EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Predictive maintenance system for production lines in manufacturing: A machine learning approach using IoT data in real-time

Serkan Ayvaz et al.

Summary: The study developed a data-driven predictive maintenance system for manufacturing production lines, utilizing real-time data from IoT sensors to detect potential failures before they occur. The system was successful in identifying indicators of potential failures and the best performing machine learning models were integrated into the production system in the factory.

EXPERT SYSTEMS WITH APPLICATIONS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Optimal mission abort policy with multiple abort criteria for a balanced system with multi-state components

Siqi Wang et al.

Summary: This article discusses the reliability issues of balanced systems in engineering fields and proposes a novel mission abort policy to adapt to the characteristics of such systems. The policy considers multiple abort criteria, including the maximum component state distance and the number of damaged components.

COMPUTERS & INDUSTRIAL ENGINEERING (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Joint Optimisation of Real-Time Deployment and Resource Allocation for UAV-Aided Disaster Emergency Communications

Tan Do-Duy et al.

Summary: This work explores the joint optimization of real-time deployment and resource allocation for UAV-aided relay systems in emergency scenarios, proposing a fast K-means-based user clustering model and optimal power and time allocation. Centralized and distributed models are provided to maximize energy efficiency under strict QoS constraints. Numerical results demonstrate the effectiveness of the proposed computational approaches for real-time resource allocation problems and show superiority over benchmark schemes.

IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

UAV-Aided Ultra-Reliable Low-Latency Computation Offloading in Future IoT Networks

Elie El Haber et al.

Summary: This paper addresses the novel problem of UAV-aided ultra-reliable low-latency computation offloading to enable future IoT services with strict requirements. The problem is divided into planning and operational phases, with an approximate algorithm and task partitioning model considered for efficient solutions. Numerical analysis demonstrates the effectiveness of the proposed solution across various scenarios, compared to baseline approaches.

IEEE TRANSACTIONS ON COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Industrial

Optimal abort rules for additive multi-attempt missions

Gregory Levitin et al.

Summary: The study explores the balance between mission success probability and system loss probability in the case of mission aborts with the possibility of multiple attempts, showing the potential benefits of aborting the mission even when there are no constraints on system survivability and only mission completion is considered.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Industrial

Optimal bivariate mission abort policy for systems operate in random shock environment

Xian Zhao et al.

Summary: This paper investigates the optimal mission abort policy for systems executing missions in a random environment combining cumulative shock model and run shock model. Two optimization models are constructed to minimize the expected total cost and maximize the mission success probability while providing a desired system survivability. The advantages of the constructed bivariate mission abort policy are justified through two heuristic abort policies that only consider single abort criterion.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Industrial

Optimizing preventive replacement schedule in standby systems with time consuming task transfers

Gregory Levitin et al.

Summary: This paper discusses the optimization of preventive replacement and scheduling in industrial and technological systems, proposing an event transition-based method to evaluate mission success probability and solving the optimal preventive replacement scheduling problem to maximize this probability. It also considers the case of heterogeneous system elements in a combined optimization problem.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Reliability Analysis of FD-Enabled Multi-UAV Systems With Short-Packet Communication

Prasanna Raut et al.

Summary: This paper investigates the use of full-duplex unmanned aerial vehicles (UAVs) in communication systems in suburban environments to improve spectrum utilization and coverage. The study finds that strong self-interference suppression capabilities can result in approximately 85% performance gain under low shadowing severity conditions.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2021)

Add to Collection

Review Computer Science, Information Systems

Cascading Failures in Internet of Things: Review and Perspectives on Reliability and Resilience

Liudong Xing

Summary: In the Internet of Things, devices collaborate in collecting and processing data, but cascading failures can lead to catastrophic issues. Understanding the causes of cascading failures and modeling them is crucial for ensuring the reliability of IoT systems.

IEEE INTERNET OF THINGS JOURNAL (2021)

Add to Collection

Article Management

Multi-criteria mission abort policy for systems subject to two-stage degradation process

Xian Zhao et al.

Summary: This paper investigates condition-based mission abort policies to balance mission reliability and system survivability. Degradation control limit and time threshold are dependent on duration in the normal stage. Structural properties of optimal abort thresholds are explored to minimize costs of mission and system failure.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2021)

Add to Collection

Article Engineering, Industrial

A Markov regenerative process model for phased mission systems under internal degradation and external shocks

Xiang-Yu Li et al.

Summary: The paper proposes an MRGP model to consider the effect of random shocks on the reliability modeling of PMSs, using a simple cold standby system as an example. The results demonstrate that integrating the MRGP model with the modular method can assess system reliability effectively.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Industrial

Mission reliability modeling of UAV swarm and its structure optimization based on importance measure

Hongyan Dui et al.

Summary: This study investigates the mission reliability and structure optimization of UAV swarm based on importance measures. A model using polygonal linear consecutive-k-out-of-n: F systems and three indicators is proposed, with numerical examples of triangular and quadrilateral UAV swarms demonstrating the method’s efficacy.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Multidisciplinary

A behavior-driven reliability modeling method for complex smart systems

Liudong Xing et al.

Summary: This paper proposes a new behavior-driven reliability modeling methodology for complex WSN-based smart systems, addressing challenges in analyzing system reliability efficiently. The method demonstrated its advantages in handling complex dependencies in smart systems through a case study of a smart home system.

QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL (2021)

Add to Collection

Article Engineering, Industrial

A Bayesian network for reliability assessment of man-machine phased-mission system considering the phase dependencies of human cognitive error

Zengkai Wang et al.

Summary: This study proposes a novel method for assessing the reliability of man-machine phased-mission systems, focusing on addressing the phase dependencies of human cognitive errors. By analyzing and categorizing the types of cognitive error dependencies and constructing system reliability models using Bayesian networks, a comprehensive assessment approach is successfully developed.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Engineering, Industrial

Mixed failure-driven and shock-driven mission aborts in heterogeneous systems with arbitrary structure

Gregory Levitin et al.

Summary: This paper focuses on failure-driven and condition-driven mission abort and rescue in systems with arbitrary structures. The system elements have varying resistance to shocks, and a probabilistic approach is suggested for evaluating mission success probability and system survival probability.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Article Telecommunications

A Survey on Unmanned Aerial Vehicles-Assisted Internet of Things: A Service-Oriented Classification

Rambod Pakrooh et al.

Summary: Unmanned Aerial Vehicles (UAVs) have been widely developed for military applications, and with the advancement of IoT and smart devices, they are now being used in various domains. The inherent advantages of UAVs, such as high dynamicity and low cost, have motivated researchers to integrate them into IoT systems. Future directions include addressing the challenges associated with designing UAV-assisted IoT systems.

WIRELESS PERSONAL COMMUNICATIONS (2021)

Add to Collection

Article Computer Science, Information Systems

URLLC Facilitated by Mobile UAV Relay and RIS: A Joint Design of Passive Beamforming, Blocklength, and UAV Positioning

Ali Ranjha et al.

Summary: This article explores the use of unmanned aerial vehicles (UAVs) and reconfigurable intelligent surfaces (RISs) to support ultrareliable and low-latency traffic in upcoming 5G networks through passive beamforming and nonlinear optimization. The proposed approach shows better convergence performance and lower computation time compared to traditional methods, highlighting the importance of UAV position for achieving ultrahigh reliability in short packet transmission.

IEEE INTERNET OF THINGS JOURNAL (2021)

Add to Collection

Article Computer Science, Information Systems

Deep Reinforcement Learning Multi-UAV Trajectory Control for Target Tracking

Jiseon Moon et al.

Summary: The article proposes a novel deep reinforcement learning approach for controlling multiple UAVs to track multiple first responders in challenging 3D environments. By considering CRLB and difference reward, this method improves tracking accuracy and reduces operational costs.

IEEE INTERNET OF THINGS JOURNAL (2021)

Add to Collection

Article Engineering, Industrial

Optimal mission abort policy for k-out-of-n: F balanced systems

Congshan Wu et al.

Summary: This paper investigates the optimal mission abort policy for the k-out-of-n: F balanced system performing a specific mission continuously. Probability indexes and optimization models are derived, with a case study provided to demonstrate the results.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Review Environmental Sciences

UAV-Based Remote Sensing Applications for Bridge Condition Assessment

Sainab Feroz et al.

Summary: The application of Unmanned Aerial Vehicles (UAVs) in bridge monitoring, in conjunction with remote sensing technologies, has been gaining momentum in recent years due to enhanced accessibility, cost efficiency, deterrence of traffic closure, and improved safety during inspection. This study conducted a comprehensive review of the integration of UAVs with remote sensing technologies, analyzing data acquisition methods such as visual imagery, infrared thermography, LiDAR, and other sensors. Sixty-five journal and conference papers published in the last two decades on NDT-based UAV systems were scrutinized, comparing stand-alone and integrated NDT-UAV methods, and discussing the facilitation of bridge inspection using UAVs in terms of ease of use, accuracy, cost-efficiency, data collection tools, and simulation platforms. Challenges and future perspectives of UAV-NDT technologies were also highlighted.

REMOTE SENSING (2021)

Add to Collection

Review Computer Science, Information Systems

Green internet of things using UAVs in B5G networks: A review of applications and strategies

S. H. Alsamhi et al.

Summary: Recent advances in Unmanned Aerial Vehicles (UAVs) have shown great potential in enhancing quality of life, smartness of cities, and overall economic efficiency. IoT requires efficient collaboration between devices, but many consume significant energy during data transmission. UAV technology plays a crucial role in achieving sustainable and reliable Industry 4.0 by transmitting data and improving collaboration efficiency between devices.

AD HOC NETWORKS (2021)

Add to Collection

Review Engineering, Industrial

Machine learning-based predictive maintenance: A cost-oriented model for implementation

Eleonora Florian et al.

Summary: This paper introduces the role of Predictive Maintenance (PdM) and Machine Learning (ML) in maintenance strategies, emphasizing the need for cost-oriented analysis when implementing ML. The study provides a mathematical model and Decision Support System (DSS) to guide the implementation of PdM, with the application demonstrated in a real case study to illustrate its relevance.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2021)

Add to Collection

Article Engineering, Industrial

Preventive replacement policies with multiple missions and maintenance triggering approaches

Qin Zhang et al.

Summary: For mission-oriented systems, it is important to propose appropriate preventive maintenance policies to ensure system reliability and maintainability. Traditional replacement policies may lead to overestimation of planned missions and increased system failure risk during missions.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Add to Collection

Proceedings Paper Engineering, Industrial

Research and Application of Photovoltaic Power Station On-line Hot Spot Detection Operation and Maintenance System Based on Unmanned Aerial Vehicle Infrared and Visible Light Detection

Guanglei Li et al.

Summary: This paper proposes a hot spot information discrimination process based on UAV inspection technology combined with infrared and visible image registration methods, and constructs an online hot spot detection system for photovoltaic power stations. Experimental results verify the accuracy and efficiency of the system in detecting hot spots.

2021 IEEE IAS INDUSTRIAL AND COMMERCIAL POWER SYSTEM ASIA (IEEE I&CPS ASIA 2021) (2021)

Add to Collection

Proceedings Paper Computer Science, Information Systems

Reliability Analysis Of Autonomous UAV Communication Using Statistical Model Checking

Mohamed Abdelhamid et al.

Summary: This paper introduces a statistical model checking framework to assess the signal strength and availability of communication devices in the presence of single event upsets (SEUs). The results show that the expected communication reliability is higher than 90% when the transmission power is at least 3.2 dBm.

2021 IEEE INTERNATIONAL MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS (MWSCAS) (2021)

Add to Collection

Proceedings Paper Automation & Control Systems

Asynchronous Reliability-Aware Multi-UAV Coverage Path Planning

Mickey Li et al.

Summary: This paper introduces a reliability-aware coverage path planning method for Multi-Robot Systems, which enhances reliability by extending the reliability evaluation framework and introducing a greedy-genetic meta-heuristic optimization method.

2021 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA 2021) (2021)

Add to Collection

Review Computer Science, Information Systems

An Advanced Unmanned Aerial Vehicle (UAV) Approach via Learning-Based Control for Overhead Power Line Monitoring: A Comprehensive Review

Husam A. Foudeh et al.

Summary: This article reviews the development of UAV technologies in patroling overhead electric power lines for monitoring and identifying faults. It examines the potential of using UAVs to avoid obstacles compared to traditional mechanical methods, while focusing on advanced Learning Control strategies for better manoeuvrability and exploring recharging strategies and motor control for improved autonomy.

IEEE ACCESS (2021)

Add to Collection

Proceedings Paper Engineering, Aerospace

Systems Health Monitoring: Integrating FMEA into Bayesian Networks

Chetan S. Kulkarni et al.

Summary: This paper proposes an approach that combines Failure Mode and Effect Analysis with Bayesian networks to aid in diagnosing faults in high-frequency electric propulsion systems entering the airspace. The integrated framework enables fault isolation by identifying the probability of specific faults or root causes occurring based on evidence observed through sensor signals.

2021 IEEE AEROSPACE CONFERENCE (AEROCONF 2021) (2021)

Add to Collection

Review Computer Science, Information Systems

A Review on UAV Wireless Charging: Fundamentals, Applications, Charging Techniques and Standards

Prithvi Krishna Chittoor et al.

Summary: Unmanned Aerial Vehicles (UAVs) are gaining popularity in various fields, especially in applications such as parcel delivery. The future of UAV charging faces important challenges and the need for non-contact multi-device charging techniques. Research explores the importance and future trends of UAV charging technology.

IEEE ACCESS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

UAV-Aided Low Latency Multi-Access Edge Computing

Ye Yu et al.

Summary: The paper proposes a UAV-aided MEC network with mmWave backhaul to address the performance improvement needs of communication networks and solve the network latency issue. Through an iterative algorithm framework, routing and joint trajectory design resource allocation problems were successfully modeled and solved.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2021)

Add to Collection

Article Robotics

Unmanned Aerial Drones for Inspection of Offshore Wind Turbines: A Mission-Critical Failure Analysis

Mahmood Shafiee et al.

Summary: With increasing global investment and rapid deployment of offshore wind energy, drones have great potential in the remote inspection of wind energy infrastructure. Though still in the early stage in the offshore wind industry, the reliability of drone-based inspection technology can be improved by semiquantitative reliability analysis to reduce operation costs and enhance personnel safety.

ROBOTICS (2021)

Add to Collection

Article Engineering, Aerospace

Robustness evaluation method for unmanned aerial vehicle swarms based on complex network theory

Xiaohong Wang et al.

CHINESE JOURNAL OF AERONAUTICS (2020)

Add to Collection

Article Engineering, Industrial

Optimal mission abort policies for multistate systems

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Management

Optimal aborting rule in multi-attempt missions performed by multicomponent systems

Gregory Levitin et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2020)

Add to Collection

Article Automation & Control Systems

Designing Mission Abort Strategies Based on Early-Warning Information: Application to UAV

Li Yang et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Robustness of cyber-physical power systems in cascading failure: Survival of interdependent clusters

Lei Chen et al.

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2020)

Add to Collection

Article Engineering, Industrial

Mission success probability optimization for phased-mission systems with repairable component modules

Jiangbin Zhao et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Engineering, Industrial

Mission abort policy optimization for series systems with overlapping primary and rescue subsystems operating in a random environment

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Engineering, Industrial

Network approach for resilience evaluation of a UAV swarm by considering communication limits

Guanghan Bai et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Engineering, Industrial

Reliability analysis of IoT systems with competitions from cascading probabilistic function dependence

Guilin Zhao et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Engineering, Industrial

How reliable should military UAVs be?

Qingqing Zhai et al.

IISE TRANSACTIONS (2020)

Add to Collection

Article Engineering, Environmental

The use of unmanned aerial vehicles (UAVs) for engineering geology applications

Daniele Giordan et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)

Add to Collection

Article Engineering, Electrical & Electronic

End-to-End Energy-Efficiency and Reliability of UAV-Assisted Wireless Data Ferrying

Taniya Shafique et al.

IEEE TRANSACTIONS ON COMMUNICATIONS (2020)

Add to Collection

Article Engineering, Industrial

Mission abort and rescue for multistate systems operating under the Poisson process of shocks

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Engineering, Industrial

An extended object-oriented petri net model for mission reliability evaluation of phased-mission system with time redundancy

Haiyue Yu et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Chemistry, Analytical

Residual Energy Analysis in Cognitive Radios with Energy Harvesting UAV under Reliability and Secrecy Constraints

Waqas Khalid et al.

SENSORS (2020)

Add to Collection

Article Computer Science, Information Systems

Secure Communication in NOMA-Assisted Millimeter-Wave SWIPT UAV Networks

Xiaoli Sun et al.

IEEE INTERNET OF THINGS JOURNAL (2020)

Add to Collection

Article Engineering, Multidisciplinary

Reliability analysis of k-out-of-n: F balanced systems with multiple functional sectors

Xian Zhao et al.

APPLIED MATHEMATICAL MODELLING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Multivalued decision diagram-based common cause failure analysis in phased-mission systems

Chaonan Wang et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Series phased-mission systems with heterogeneous warm standby components

Gregory Levitin et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2020)

Add to Collection

Review Computer Science, Information Systems

Reliability in Internet of Things: Current Status and Future Perspectives

Liudong Xing

IEEE INTERNET OF THINGS JOURNAL (2020)

Add to Collection

Article Engineering, Industrial

Redundancy allocation problem of phased-mission system with non-exponential components and mixed redundancy strategy

Xiang-Yu Li et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Engineering, Industrial

Reliability assessment of multi-state phased mission systems with common bus performance sharing considering transmission loss and performance storage

Chen Cheng et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Engineering, Industrial

Optimal abort rules and subtask distribution in missions performed by multiple independent heterogeneous units

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Engineering, Industrial

Reliability evaluation of a k-out-of-n(G)-subsystem based multi-state system with common bus performance sharing

Peng Su et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Public, Environmental & Occupational Health

Mission Abort Policy for Systems with Observable States of Standby Components

Gregory Levitin et al.

RISK ANALYSIS (2020)

Add to Collection

Article Automation & Control Systems

Spatially Coupled Codes via Partial and Recursive Superposition for Industrial IoT With High Trustworthiness

Shancheng Zhao et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

On the Performance of RIS-Assisted Dual-Hop UAV Communication Systems

Liang Yang et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2020)

Add to Collection

Article Engineering, Industrial

Optimal resource allocation for defending k-out-of-n systems against sequential intentional and unintentional impacts

Hui Xiao et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Proceedings Paper Automation & Control Systems

Model-Based Dependability Assessment of Phased-Mission Unmanned Aerial Vehicles

Mikael Steurer et al.

IFAC PAPERSONLINE (2020)

Add to Collection

Proceedings Paper Engineering, Electrical & Electronic

VAHAK: A Blockchain-based Outdoor Delivery Scheme using UAV for Healthcare 4.0 Services

Rajesh Gupta et al.

IEEE INFOCOM 2020 - IEEE CONFERENCE ON COMPUTER COMMUNICATIONS WORKSHOPS (INFOCOM WKSHPS) (2020)

Add to Collection

Proceedings Paper Engineering, Electrical & Electronic

Latency and Reliability Oriented Collaborative Optimization for Multi-UAV Aided Mobile Edge Computing System

Xiangwang Hou et al.

IEEE INFOCOM 2020 - IEEE CONFERENCE ON COMPUTER COMMUNICATIONS WORKSHOPS (INFOCOM WKSHPS) (2020)

Add to Collection

Article Engineering, Industrial

Dynamic mission abort policy for systems operating in a controllable environment with self-healing mechanism

Qingan Qiu et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Add to Collection

Article Computer Science, Information Systems

Efficient Deployment With Geometric Analysis for mmWave UAV Communications

Jianwei Zhao et al.

IEEE WIRELESS COMMUNICATIONS LETTERS (2020)

Add to Collection

Article Computer Science, Information Systems

UAV-Enabled Reliable Mobile Relaying Based on Downlink NOMA

Lei Wang et al.

IEEE ACCESS (2020)

Add to Collection

Article Engineering, Industrial

Optimizing dynamic survivability and security of replicated data in cloud systems under co-residence attacks

Luo Liang et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

Add to Collection

Article Engineering, Multidisciplinary

An analytical method for reliability analysis of hardware-software co-design system

Yanhao Zeng et al.

QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL (2019)

Add to Collection

Article Computer Science, Hardware & Architecture

UAV-ASSISTED EMERGENCY NETWORKS IN DISASTERS

Nan Zhao et al.

IEEE WIRELESS COMMUNICATIONS (2019)

Add to Collection

Article Engineering, Industrial

Influence of failure propagation on mission abort policy in heterogeneous warm standby systems

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

Add to Collection

Article Computer Science, Information Systems

UAV Communications for 5G and Beyond: Recent Advances and Future Trends

Bin Li et al.

IEEE INTERNET OF THINGS JOURNAL (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Mission success evaluation of repairable phased-mission systems with spare parts

Jiangbin Zhao et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Reliability of balanced multi-level Unmanned Aerial Vehicles

Jingbo Guo et al.

COMPUTERS & OPERATIONS RESEARCH (2019)

Add to Collection

Article Public, Environmental & Occupational Health

Optimal Abort Rules for Multiattempt Missions

Gregory Levitin et al.

RISK ANALYSIS (2019)

Add to Collection

Article Engineering, Industrial

Optimal mission abort policy for systems subject to random shocks based on virtual age process

Qiu Qingan et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

Add to Collection

Article Telecommunications

Hybrid-Duplex Communications for Multi-UAV Networks: An Outage Probability Analysis

Tan Zheng Hui Ernest et al.

IEEE COMMUNICATIONS LETTERS (2019)

Add to Collection

Article Engineering, Industrial

Reliability analysis of semi-Markov systems with restriction on transition times

Wu Bei et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

Add to Collection

Article Engineering, Industrial

Gamma process based optimal mission abort policy

Qingan Qiu et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

Add to Collection

Article Engineering, Industrial

Reliability analysis of the starting and landing system of UAV by FMECA and FTA

Guang-Jun Jiang et al.

JOURNAL OF INDUSTRIAL AND PRODUCTION ENGINEERING (2019)

Add to Collection

Article Computer Science, Information Systems

Joint Resource Allocation and Trajectory Control for UAV-Enabled Vehicular Communications

Lijun Deng et al.

IEEE ACCESS (2019)

Add to Collection

Article Public, Environmental & Occupational Health

Optimal Mission Abort Policy for Systems Operating in a Random Environment

Gregory Levitin et al.

RISK ANALYSIS (2018)

Add to Collection

Article Telecommunications

Optimum Placement of UAV as Relays

Yunfei Chen et al.

IEEE COMMUNICATIONS LETTERS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Joint Compression, Channel Coding, and Retransmission for Data Fidelity With Energy Harvesting

Chiara Pielli et al.

IEEE TRANSACTIONS ON COMMUNICATIONS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Ultra Reliable UAV Communication Using Altitude and Cooperation Diversity

Mohammad Mahdi Azari et al.

IEEE TRANSACTIONS ON COMMUNICATIONS (2018)

Add to Collection

Article Computer Science, Hardware & Architecture

Mission Abort Policy in Heterogeneous Nonrepairable 1-Out-of-N Warm Standby Systems

Gregory Levhitin et al.

IEEE TRANSACTIONS ON RELIABILITY (2018)

Add to Collection

Article Engineering, Industrial

Co-optimization of state dependent loading and mission abort policy in heterogeneous warm standby systems

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

Add to Collection

Article Engineering, Industrial

Joint routing and aborting optimization of cooperative unmanned aerial vehicles

Rui Peng

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

Add to Collection

Article Engineering, Industrial

Probabilistic competing failure analysis in phased-mission systems

Yujie Wang et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

Add to Collection

Article Engineering, Industrial

Aggregated combinatorial reliability model for non-repairable parallel phased-mission systems

Zhai Qingqing et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

Add to Collection

Article Engineering, Industrial

Mission abort policy balancing the uncompleted mission penalty and system loss risk

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

Add to Collection

Article Engineering, Industrial

Optimal mission abort policy for systems in a random environment with variable shock rate

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

Add to Collection

Article Engineering, Multidisciplinary

Optimal mission abort policy with multiple shock number thresholds

Gregory Levitin et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART O-JOURNAL OF RISK AND RELIABILITY (2018)

Add to Collection

Article Computer Science, Information Systems

Time-Frequency Scheduling and Power Optimization for Reliable Multiple UAV Communications

Zhen Xue et al.

IEEE ACCESS (2018)

Add to Collection

Article Computer Science, Information Systems

Toward a Consensus on the Definition and Taxonomy of Power System n Resilience

Amin Gholami et al.

IEEE ACCESS (2018)

Add to Collection

Article Construction & Building Technology

LCPC error correction code for IoT applications

Salah A. Alabady et al.

SUSTAINABLE CITIES AND SOCIETY (2018)

Add to Collection

Article Engineering, Industrial

Reliability approximation of k-out-of-n pairs: G balanced systems with spatially distributed units

Dingguo Hua et al.

IISE TRANSACTIONS (2018)

Add to Collection

Article Engineering, Industrial

An efficient phased-mission reliability model considering dynamic k-out-of-n subsystem redundancy

Suprasad Amari et al.

IISE TRANSACTIONS (2018)

Add to Collection

Article Computer Science, Information Systems

Reliable Flying IoT Networks for UAV Disaster Rescue Operations

Taemin Ahn et al.

MOBILE INFORMATION SYSTEMS (2018)

Add to Collection

Article Engineering, Industrial

Reliability assessment of phased-mission systems under random shocks

Li Xiang-Yu et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

Add to Collection

Article Chemistry, Analytical

Reliability and Maintenance Analysis of Unmanned Aerial Vehicles

Enrico Petritoli et al.

SENSORS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Ultra-Reliable IoT Communications with UAVs: A Swarm Use Case

Zhenhui Yuan et al.

IEEE COMMUNICATIONS MAGAZINE (2018)

Add to Collection

Article Engineering, Industrial

Flying asset: Framework for developing scalable maintenance program for unmanned aircraft systems (UAS)

Alberto Martinetti et al.

JOURNAL OF QUALITY IN MAINTENANCE ENGINEERING (2018)

Add to Collection

Proceedings Paper Automation & Control Systems

Aiding Cascading Analysis Modelling with High-performance-computing Technology

Yousu Chen et al.

IFAC PAPERSONLINE (2018)

Add to Collection

Article Automation & Control Systems

CRC Error Correction in IoT Applications

Evgeny Tsimbalo et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2017)

Add to Collection

Article Computer Science, Hardware & Architecture

Preventive Replacements in Real-Time Standby Systems With Periodic Backups

Gregory Levitin et al.

IEEE TRANSACTIONS ON RELIABILITY (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Mobile Unmanned Aerial Vehicles (UAVs) for Energy-Efficient Internet of Things Communications

Mohammad Mozaffari et al.

IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Using reliability analysis to support decision making in phased mission systems

Yang Zhang et al.

QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL (2017)

Add to Collection

Article Engineering, Industrial

Competing failure analysis in phased-mission systems with multiple functional dependence groups

Chaonan Wang et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

Add to Collection

Article Engineering, Industrial

Unmanned aerial vehicle safety assessment modelling through petri Nets

P. Goncalves et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

Add to Collection

Article Engineering, Industrial

Balancing theft and corruption threats by data partition in cloud system with independent server protection

Liudong Xing et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

Add to Collection

Article Computer Science, Hardware & Architecture

A green and reliable communication modeling for industrial internet of things

Anfeng Liu et al.

COMPUTERS & ELECTRICAL ENGINEERING (2017)

Add to Collection

Article Computer Science, Theory & Methods

ActiveTrust: Secure and Trustable Routing in Wireless Sensor Networks

Yuxin Liu et al.

IEEE TRANSACTIONS ON INFORMATION FORENSICS AND SECURITY (2016)

Add to Collection

Article Computer Science, Hardware & Architecture

Reliability Estimation of k-out-of-n Pairs:G Balanced Systems With Spatially Distributed Units

Dingguo Hua et al.

IEEE TRANSACTIONS ON RELIABILITY (2016)

Add to Collection

Article Engineering, Industrial

Reliability analysis and optimal structure of series-parallel phased-mission systems subject to fault-level coverage

Rui Peng et al.

IIE TRANSACTIONS (2016)

Add to Collection

Article Engineering, Mechanical

An efficient phased mission reliability analysis method for systems with multiple failure modes

J. Chen et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2016)

Add to Collection

Article Telecommunications

Hybrid wireless sensor networks: a reliability, cost and energy-aware approach

Amir Ehsani Zonouz et al.

IET WIRELESS SENSOR SYSTEMS (2016)

Add to Collection

Article Engineering, Aerospace

Exploring Civil Drone Accidents and Incidents to Help Prevent Potential Air Disasters

Graham Wild et al.

AEROSPACE (2016)

Add to Collection

Article Computer Science, Hardware & Architecture

Mission Reliability, Cost and Time for Cold Standby Computing Systems with Periodic Backup

Gregory Levitin et al.

IEEE TRANSACTIONS ON COMPUTERS (2015)

Add to Collection

Article Engineering, Industrial

Optimum maintenance strategy under uncertainty in the lifetime distribution

Bram de Jonge et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

Add to Collection

Article Engineering, Industrial

Non-periodic preventive maintenance with reliability thresholds for complex repairable systems

Zu-Liang Lin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

Add to Collection

Article Engineering, Industrial

A condition-based maintenance of a dependent degradation-threshold-shock model in a system with multiple degradation processes

N. C. Caballe et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

Add to Collection

Article Engineering, Industrial

Combinatorial analysis of body sensor networks subject to probabilistic competing failures

Yujie Wang et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

Add to Collection

Article Chemistry, Analytical

Resilient Wireless Sensor Networks Using Topology Control: A Review

Yuanjiang Huang et al.

SENSORS (2015)

Add to Collection

Article Automation & Control Systems

A Deployment Strategy for Multiple Types of Requirements in Wireless Sensor Networks

Xuxun Liu

IEEE TRANSACTIONS ON CYBERNETICS (2015)

Add to Collection

Article Computer Science, Hardware & Architecture

Coded packets over lossy links: A redundancy-based mechanism for reliable and fast data collection in sensor networks

Celimuge Wu et al.

COMPUTER NETWORKS (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Reliability-Oriented Single-Path Routing Protocols in Wireless Sensor Networks

Amir Ehsani Zonouz et al.

IEEE SENSORS JOURNAL (2014)

Add to Collection

Article Computer Science, Hardware & Architecture

A Multiple-Valued Decision Diagram Based Method for Efficient Reliability Analysis of Non-Repairable Phased-Mission Systems

Yuchang Mo et al.

IEEE TRANSACTIONS ON RELIABILITY (2014)

Add to Collection

Article Engineering, Industrial

An integrated systemic model for optimization of condition-based maintenance with human error

S. M. Asadzadeh et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2014)

Add to Collection

Article Engineering, Industrial

Availability modeling and optimization of dynamic multi-state series-parallel systems with random reconfiguration

Y. F. Li et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2014)

Add to Collection

Article Automation & Control Systems

MDD-Based Method for Efficient Analysis on Phased-Mission Systems With Multimode Failures

Yuchang Mo et al.

IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS (2014)

Add to Collection

Article Automation & Control Systems

On the Use of Mean Residual Life as a Condition Index for Condition-Based Maintenance Decision-Making

Khac Tuan Huynh et al.

IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS (2014)

Add to Collection

Article Computer Science, Information Systems

Research Directions for the Internet of Things

John A. Stankovic

IEEE INTERNET OF THINGS JOURNAL (2014)

Add to Collection

Article Engineering, Industrial

Fast mission reliability prediction for Unmanned Aerial Vehicles

J. D. Andrews et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2013)

Add to Collection

Article Engineering, Industrial

Reliability of non-repairable phased-mission systems with propagated failures

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2013)

Add to Collection

Article Engineering, Industrial

Evaluating maintenance policies by quantitative modeling and analysis

Enrico Zio et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2013)

Add to Collection

Article Chemistry, Analytical

A Routing Protocol Based on Energy and Link Quality for Internet of Things Applications

Kassio Machado et al.

SENSORS (2013)

Add to Collection

Article Automation & Control Systems

Algorithm for Reliability Evaluation of Nonrepairable Phased-Mission Systems Consisting of Gradually Deteriorating Multistate Elements

Gregory Levitin et al.

IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS (2013)

Add to Collection

Article Automation & Control Systems

Reliability of Nonrepairable Phased-Mission Systems With Common Cause Failures

Gregory Levitin et al.

IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS (2013)

Add to Collection

Proceedings Paper Computer Science, Theory & Methods

Reliability for emergency applications in Internet of Things

Nourhene Maalel et al.

2013 9TH IEEE INTERNATIONAL CONFERENCE ON DISTRIBUTED COMPUTING IN SENSOR SYSTEMS (IEEE DCOSS 2013) (2013)

Add to Collection

Article Computer Science, Hardware & Architecture

Recursive Algorithm for Reliability Evaluation of Non-Repairable Phased Mission Systems With Binary Elements

Gregory Levitin et al.

IEEE TRANSACTIONS ON RELIABILITY (2012)

Add to Collection

Article Computer Science, Hardware & Architecture

Improved Efficiency in the Analysis of Phased Mission Systems With Multiple Failure Mode Components

Sean Reed et al.

IEEE TRANSACTIONS ON RELIABILITY (2011)

Add to Collection

Article Engineering, Electrical & Electronic

Performance and reliability of electrical power grids under cascading failures

Liang Chang et al.

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2011)

Add to Collection

Article Computer Science, Cybernetics

Automated Modeling of Dynamic Reliability Block Diagrams Using Colored Petri Nets

Ryan Robidoux et al.

IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART A-SYSTEMS AND HUMANS (2010)

Add to Collection

Article Engineering, Industrial

An efficient phased mission reliability analysis for autonomous vehicles

R. Remenyte-Prescott et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2010)

Add to Collection

Article Engineering, Industrial

Reliability and performance of multi-state systems with propagated failures having selective effect

Gregory Levitin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2010)

Add to Collection

Article Computer Science, Hardware & Architecture

A New Decision-Diagram-Based Method for Efficient Analysis on Multistate Systems

Liudong Xing et al.

IEEE TRANSACTIONS ON DEPENDABLE AND SECURE COMPUTING (2009)

Add to Collection

Article Computer Science, Hardware & Architecture

Probability of Loss Assessment of Critical k-Out-of-n:G Systems Having a Mission Abort Policy

Albert Myers

IEEE TRANSACTIONS ON RELIABILITY (2009)

Add to Collection

Article Engineering, Industrial

Reliability analysis of discrete event dynamic systems with Petri nets

Nabil Sadou et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2009)

Add to Collection

Article Engineering, Multidisciplinary

Multiplatform phased mission reliability modelling for mission planning

D. R. Prescott et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART O-JOURNAL OF RISK AND RELIABILITY (2009)

Add to Collection

Article Engineering, Multidisciplinary

A reliability analysis method using binary decision diagrams in phased mission planning

D. R. Prescott et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART O-JOURNAL OF RISK AND RELIABILITY (2009)

Add to Collection

Article Engineering, Electrical & Electronic

Using transmission line outage data to estimate cascading failure propagation in an electric power system

Hui Ren et al.

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS (2008)

Add to Collection

Article Computer Science, Cybernetics

An efficient binary-decision-diagram-based approach for network reliability and sensitivity analysis

Liudong Xing

IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART A-SYSTEMS AND HUMANS (2008)

Add to Collection

Article Engineering, Industrial

Phased mission modelling of systems with maintenance-free operating periods using simulated Petri nets

S. P. Chew et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2008)

Add to Collection

Article Engineering, Electrical & Electronic

An energy-efficient multipath routing protocol for wireless sensor networks

Ye Ming Lu et al.

INTERNATIONAL JOURNAL OF COMMUNICATION SYSTEMS (2007)

Add to Collection

Article Computer Science, Hardware & Architecture

Reliability evaluation of phased-mission systems with imperfect fault coverage and common-cause failures

Liudong Xing

IEEE TRANSACTIONS ON RELIABILITY (2007)

Add to Collection

Article Engineering, Aerospace

Autonomous mission management for unmanned aerial vehicles

M Barbier et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2004)

Add to Collection

Article Engineering, Industrial

Modeling of system reliability Petri nets with aging tokens

V Volovoi

RELIABILITY ENGINEERING & SYSTEM SAFETY (2004)

Add to Collection

Article Computer Science, Hardware & Architecture

Analysis of generalized phased-mission system reliability, performance, and sensitivity

LD Xing et al.

IEEE TRANSACTIONS ON RELIABILITY (2002)

Add to Collection

Article Computer Science, Hardware & Architecture

Markov regenerative stochastic Petri nets to model and evaluate phased mission systems dependability

I Mura et al.

IEEE TRANSACTIONS ON COMPUTERS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.